# changelog

author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14.1063
changelog:
  -     Fix known issue on v1055 regarding RDE dictionary broken which will cause
      unexpected FW upgrading error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.2.14.1018
changelog:
  -     To address known MCTP issue on Intel Gen12/AMD Turin 2P platforms configured
      with NS204i device.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.5.9-1.1
changelog:
  -     Added Fan-FailSafe which continually checks to see if an installed, powered
      blade is communicating with the HPE Edgeline Chassis Controller. If there is
      no communication for 90 seconds or more, the fans will go to full blow. When
      the blade begins to communicate again, the fans will return to normal.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.04-2.1
changelog:
  -     *The following fix was incorporated in this version:**
      
        *  Fixed NVRAM CRC error
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v155369/D3000_P07231-002.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.04-3.1
changelog:
  -     *The following fix was incorporated in this version:**
      
        *  Fixed NVRAM CRC error
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v157942/P07231-003.html) for the complete listing of fixes,
      enhancements, known issues and work-arounds corresponding to this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.12
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Fixed TLB exception during upgrade from Rev build 1.11.000 to 0412.000
      
        * Fixed expander bootstrap task which failed with 0xB1 error code appearing in the console due to missing NVRAM tag - Product Name
      
        * Enabled-ClusterS2D command that does not complete with SATA drive in D3610
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v154196/D3000_P07231-004.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04
changelog:
  -     *The following enhancement has been added in this version:**
      
        * Added support of Rhel 7.8 
      
        * Added support of Rhel 8.2 
      
        * Added support of SLES15 SP2


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
      
        * The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
      
        * Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
      
        * If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v177052/D3000_P07231-006.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04-2.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
      
        * The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
      
        * Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
      
        * If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v191363/D3000_v5.04B.html) for the complete listing of fixes,
      enhancements, known issues and work-arounds corresponding to this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04-3.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
      
        * The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
      
        * Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
      
        * If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v202692/20-D3000-Gen10RN504C_ED3.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04-18.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
      
        * The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
      
        * Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
      
        * If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v279104/20-D3000-Gen10RN504Q_ED17.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 6.00-12.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Code optimization to save memory repo.
      
        * TLB exception seen while doing esp reset when expander reset was in progress.
      
        * Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.
      
        * Added whole new Delta PS-pmbus code , Updated the ESP version number.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1808229885/v279105/20-D3000B-Gen10RN600K_ED12.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-4.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v172139/D6020_P07232-006.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-5.1
changelog:
  -     *The following enhancement has been added in this version:**
      
        * Added support of Rhel 8


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-5.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v177006/D6020_v274_RN.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-7.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v183133/D6020_P07232-008.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-9.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v191364/D6020_v2.74I.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-10.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v202690/20-D6020-Gen10RN274J_ED8.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-25.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v279106/20-D6020-Gen10RN274X_ED22.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0105
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * SAS drive LED behavior was corrected to align with the Smart Array specification, specifically: 
          * The Activity LED of a sanitize erase drive now turns ON when connected.
      
          * The Array present LED now turns ON for the SAS drive.
      
          * The Activity LED now blinks on all drives during a SAS drive rebuild.
      
        * The Serial Output Buffer (SOB) has a fixed sized for stored entries. Now, when the buffer is full, the oldest entries are cleared or committed to persistent storage (if available). For this reason, subsequent requests to read the SOB only retrieves new entries that have been logged since the last successful request to read the SOB.
      
        * The drive activity LED has been changed to a function as described in the installation and maintenance guide.
      
        * The reboot flag was changed to issue a hard reset, which enables the service delivery subsystem (ZPSDS) information be shared across (expanded across) the internal expanders to all devices attached.
      
        * The drive activity LED on the SAS disk drives was changed to support the ACTIVE_LOW signal state. The ACTIVE_LOW signal state is the default operation state for most drives.
      
        * The SCSI WRITE BUFFER MODE was changed from activate to soft reset. This change improves the host ability to detect and report whether the enclosure is going to perform a disruptive or non-disruptive activation after a firmware upgrade.
      
        * With I/O module firmware v0105 and PQI firmware 2.02 , the slot power cycle issue has been resolved by changing the power cycle SES request to return a failure when a partner slot is not connected.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p480571592/v172138/D8000_P20366-002.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0107
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * In STD INQUIRY RESPONSE, the ErrM bit was always being set. The ErrM bit indicates that the enclosure firmware detects a mismatch in any of its package versions and the firmware version of a FRU component. The issue was due to an incorrect version of PSU firmware being included and that has been fixed.
      
        * After installing the latest firmware on the enclosure I/O modules, the SES targets could not be discovered on the host. The virtual phy bit in SMP DISCOVER RESPONSE, which is used by the Microchip smartpqi HBA, was det for the virtual phy of the I/O module.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p480571592/v183134/D8000_P20366-004.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0111
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Incorrect programming of the PHY ERROR COUNTERS parameter caused the amber LED to be lit, resulting in a false warning. The counter condition was corrected and the amber LED now functions correctly.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p480571592/v191365/D8000_v0111.html) for the complete listing of fixes,
      enhancements, known issues and work-arounds corresponding to this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0118
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * User was not able to collect ddump logs.
      
        * Logical Fault LED remains ON even after clearing the fault using "reboot soft"
      
        * Vendor ID showed as "DEFAULT" for D8000 expander in SSACLI enclosure detail
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p480571592/v203448/20-D8000-Gen10RN0118_ED1.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0130
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
        * PSU version is showing as "No Ver" after inserted the New bel power PSU.
        * GEM_5_2 Coverity defect fix.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p480571592/v218471/20-D8000-Gen10RN0130_ED1.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0130-13.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
        * PSU version is showing as "No Ver" after inserted the New bel power PSU.
        * GEM_5_2 Coverity defect fix.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p480571592/v279107/20-D8000-Gen10RN0130L_ED14.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.039
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version of the System ROM contains updates aligned with the Tatlow PLR2
      BKC WW50.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.200
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the MCTP PCIe devices could not be discovered after
      an SPS firmware update without an AC power cycle. This issue is not unique to
      HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.204
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This version is in compliance with Intel IPU.2022.3 guidance.
      
      The following vulnerabilities have been addressed in this SPS release:
      CVE-2022-29515. These issues are not unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.309
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2023.1 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the Server Platform Services Firmware provides mitigations
      for security vulnerability documented as CVE-2022-36794. This issue is not
      unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.505
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU.2023.3 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.604
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This
      version of the SPS should be paired with System ROM 2.00 (02/01/2024) or
      later.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU.2024.1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.700
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This
      version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System
      ROM 2.30 (01/16/2025) or later.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU 2025.1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.03.708
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This
      version of the SPS 06.00.03.708 (2.50_07_25_2025) should be paired with System
      ROM 2.50 (08/06/2025) or later.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU 2025.3 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.400
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2021.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the Server Platform Services (SPS) Firmware provides
      mitigations for SPS security vulnerabilities documented as CVE-2021-0060. This
      issue is not unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.500
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2022.1 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU.2022.1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.600
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2022.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU.2022.2 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.700
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2022.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU.2022.3 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.804
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2023.1 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU.2023.1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.913
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with Intel IPU.2023.3 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.05.005
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This
      version of the SPS 05.01.05.005 should be paired with System ROM 3.50
      (01/16/2025) or later.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU 2025.1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.05.103
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This
      version of the SPS 05.01.05.103 should be paired with System ROM 3.70
      (08/06/2025) or later.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the Server Platform Services Firmware provides mitigations
      for security vulnerability documented as CVE-2025-20067. This issue is not
      unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2024.09.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.329.10
      
      14.4.329.10
      
      14.4.329.9
      
      14.4.290.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.03.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.473.14
      
      14.4.473.14
      
      14.4.473.8
      
      14.4.469.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.09.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.473.30
      
      14.4.473.30
      
      14.4.473.29
      
      14.4.469.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.09.01
changelog:
  -     Fixed the Following:
      
        1. Switch Login Incomplete After Firmware Upgrade
        2. Boot Incomplete on RHEL 10


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.11.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2026.04.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.5
      
      14.4.731.5
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.10
      
      14.4.731.10
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.4.731.10
      
      14.4.731.10
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.731.10
      
      14.4.731.10
      
      14.4.716.0
      
      14.4.718.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.4.731.10
      
      14.4.731.10
      
      14.4.716.0
      
      14.4.718.0
      
      
      
      Added Following Enhancements:
      
      [Redfish]:HPE specific SFP Data - Predicted days for non working stage
      
      [Redfish]: API to read SFP Data


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2026.06.01
changelog:
  -     Fixed the following:
      
      Garbled characters are observed in the System Utilities(F9) configuration
      screens with Japanese Environment when HPE Emulex Fibre Channel Host Bus
      Adapter is installed on ProLiant Gen11 and ProLiant Gen12 servers, applicable
      for:
      
        * HPE SN1610E 32Gb Dual port Fibre Channel Host Bus Adapter
        * HPE SN1610E 32Gb Single port Fibre Channel Host Bus Adapter
        * HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
        * HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.03.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.10.08
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.10.08
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.10.08
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.10.08
      
      09.15.05
      
      7.39
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.05.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.04.09
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.10.09
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.10.09
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.10.09
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.10.09
      
      09.15.05
      
      7.39
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.05.02
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.01
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.01
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.01
      
      09.15.05
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.01
      
      09.15.05
      
      7.39
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.05.02
changelog:
  -     Fixed the following:
      
        1. Windows BitLocker causes the system boot due to ROM signature failure during POST.
        2. Increase an internal timeout value for SPI/Flash read.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2025.11.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.09
      
      09.15.15
      
      7.39
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.09
      
      09.15.15
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.09
      
      09.15.15
      
      7.39
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.09
      
      09.15.15
      
      7.39
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2026.04.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.11
      
      09.15.15
      
      7.39
      
      NA
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.11
      
      09.15.15
      
      7.39
      
      NA
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.11
      
      09.15.15
      
      7.39
      
      NA
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.11
      
      09.15.15
      
      7.39
      
      NA


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2026.06.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.05.01
      
      9.15.05
      
      7.28
      
      3.68
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.13
      
      09.15.19
      
      7.39
      
      NA
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.11.13
      
      09.15.19
      
      7.39
      
      NA
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.13
      
      09.15.19
      
      7.39
      
      NA
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.11.13
      
      09.15.19
      
      7.39
      
      NA


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2026.06.01
changelog:
  -     Fixed the following:
      
        *  SN1610Q and SN1700Q Adapter disappears from integrated Lights Out (ILO) listing when its Small Form Factor Pluggable (SFP) transceiver is reinserted.
        * Vendor and Part Number Values are empty for Adapter port with 32G Amphenol Small Form Factor Pluggable (SFP) transceiver during Redfish SFP Read
        * SN1610Q adapter with FW 02.11.09 configured on RedHat Enterprise Linux; rhel messages file is filled with the following kernel messages like: "qla2xxx [0000:61:00.0]-706d:4: Unable to read SFP data (2/a0/0)"
        * HPE Firmware Flash for QLogic 32Gb and 64Gb Fibre Channel Host components doesn't complete the firmware flash.
        * HPE MBX CMD timeout and ISP Abort/Reset after SFP reinsertion.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15-3.1
changelog:
  -     *The following issues have been fixed in component version 1.0.15(B):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **The following issues have been fixed in firmware version 12.28.2006:**
      
        * Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in firmware version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.16
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      Important : Security Hardening Enhancements - This release contains important
      reliability improvements and security hardening enhancements. HPE recommends
      upgrading your device firmware to this version to improve the firmware
      security and reliability of your device.
      
      **New Features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.4030:**
      
        * Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.16
changelog:
  -     *The following issues have been fixed in firmware version 12.28.2006:**
      
        * Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.4030:**
      
        * VF FLR would get stuck when its PF triggered the FLR as well.
        * Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.17
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2302:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)
      
      **Firmware for the following devices has been updated to 16.35.4030:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      Important : Security Hardening Enhancements - This release contains important
      reliability improvements and security hardening enhancements. HPE recommends
      upgrading your device firmware to this version to improve the firmware
      security and reliability of your device.
      
      **No new Features and changes included in version 12.28.2302.**
      
      **New features and changes included in version 16.35.4030:**
      
        * Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.17
changelog:
  -     *No new fixes have been added in version 12.28.2302.**
      
      **The following issues have been fixed in version 16.35.4030:**
      
        * VF FLR would get stuck when its PF triggered the FLR as well.
        * Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.18
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2302:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)
      
      **Firmware for the following devices has been updated to 16.35.4506:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      Important : Security Hardening Enhancements - This release contains important
      reliability improvements and security hardening enhancements. HPE recommends
      upgrading your device firmware to this version to improve the firmware
      security and reliability of your device.
      
      
      
      **No new Features and changes included in version 12.28.2302.**
      
      
      
      **New features and changes included in version 16.35.4506:**
      
        * Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.18
changelog:
  -     *No new fixes have been added in version 12.28.2302.**
      
      
      
      **The following issues have been fixed in version 16.35.4506:**
      
      
      
        * Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.19
changelog:
  -     *Firmware for the following devices has been updated to 12.28.4704:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)
      
      **Firmware for the following devices has been updated to 16.35.8002:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.4704:**
      
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.
      
      
      
      **New features and changes included in version 16.35.8002:**
      
        * Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.19
changelog:
  -     *No fixes are included in version 12.28.4704.**
      
      
      
      **The following issues have been fixed in version 16.35.8002:**
      
        * Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.20
changelog:
  -     *No fixes are included in version 12.28.4706.**
      
      
      
      **No fixes are included in version 16.35.8008.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15
changelog:
  -     *The following issues have been fixed in version 20.42.1000:**
      
        * RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
        * HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
        * Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.16
changelog:
  -     *Firmware for the following devices has been updated to 20.43.1014:**
      
        * HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21
      
      Security Hardening Enhancements: This release contains important reliability
      improvements and security hardening enhancements. HPE recommends upgrading
      your device's firmware to this release to improve the firmware security and
      reliability of your device.
      
      
      
      **New features and changes included in version 20.43.1014:**
      
        * Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
        * Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.
      
      The 5 sub-operations are:
      
        * QUERY_HCA_CAP with other function
        * QUERY_VUID with direct data
        * QUERY_ROCE_ADDRESS with other vport
        * SET_HCA_CAP with other function
        * POSTPONE_CONNECTED_QP_TIMEOUT with other vport
      
      The new added caps are:
      
        * tool_partial_cap.postpone_conn_qp_timeout_other_vport,
        * tool_partial_cap.set_hca_cap_other_func
        * tool_partial_cap.query_roce_addr_other_vport
        * tool_partial_cap.query_vuid_direct_data
        * tool_partial_cap.query_hca_cap_other_func


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.16
changelog:
  -     *The following issues have been fixed in version 20.43.1014:**
      
        * Setup crash when "create_sq" used invalid mbox.
        * The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.17
changelog:
  -     *Firmware for the following devices has been updated to 20.43.2026:**
      
        * HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21
      
      Security Hardening Enhancements: This release contains important reliability
      improvements and security hardening enhancements. HPE recommends upgrading
      your device's firmware to this release to improve the firmware security and
      reliability of your device.
      
      
      
      **No changes or new features have been included in version 20.43.2026.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.17
changelog:
  -     *The following issues have been fixed in version 20.43.2026:**
      
        * A linkup issue vs a 3rd party switch (BCM53405).
        * A reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.18
changelog:
  -     *Firmware for the following devices has been updated to 20.43.2566:**
      
        * HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21
      
      Security Hardening Enhancements: This release contains important reliability
      improvements and security hardening enhancements. HPE recommends upgrading
      your device's firmware to this release to improve the firmware security and
      reliability of your device.
      
      
      
      **No changes or new features have been included in version 20.43.2566.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.18
changelog:
  -     *The following issues have been fixed in version 20.43.2566:**
      
        * Resolved an issue that caused the SLRG register to be unreadable when using the SMP AccessRegister MAD.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.19
changelog:
  -     *New features and changes included in version 20.43.8002:**
      
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.19
changelog:
  -     *The following issues have been fixed in version 20.43.8002:**
      
        * Enabling DIM led to high IRQ/s in certain scenarios.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-3.1
changelog:
  -      Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Adds support for a second source drive pre-amp, and improves reliability with an updated direct offline scan algorithm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5-9.1
changelog:
  -      Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5-11.1
changelog:
  -      Fixed an incompatibility issue in MCTP over PCIe VDM function
        * Updated WCTEMP value for thermal throttling threshold
        * Fixed CA <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00130699en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      Critical Firmware Upgrade Required for Certain HPE Hard Drive Models to Prevent Drive Failure After 65536 Hours of Operation
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=a00160576en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-15.1
changelog:
  -      This firmware contains a fix for a data integrity issue that could occur during a power cycle while the drive is processing write commands.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
        * For more information, CB is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.
        * Assert fixes, logging enhancements and all current firmware improvements.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5
changelog:
  -      Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5-6.1
changelog:
  -      Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
        * For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA-3.1
changelog:
  -      Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Corrective actions to fix potential background media scan issue.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-4.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5-2.1
changelog:
  -      Added fix to address a rare case where drive health queries can trigger false drive predictive failure.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4
changelog:
  -      This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4-3.1
changelog:
  -      This is a maintenance release to include code fix of FW defense algorithm, SN change after assert and POSCAP false alarm.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=a00150197en_us>.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us> with the estimated effective date 2024/8/9


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-2.1
changelog:
  -      Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us>.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 85032G00-13.1
changelog:
  -      Implements FW-based VPD.
        * ARP setting is changed from "Capable & Discoverable" to "Fixed & Discoverable".
        * A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD6
changelog:
  -      A Drive Firmware enhancement has been made to reduce the probability of infrequent, unexpected power loss on some backed drives in Primera 600 LFF enclosure.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Improves performance in certain file systems and implements fixes for several of the previous firmware's shortcomings.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD6
changelog:
  -     This maintenance revision improves data integrity. The risk of not upgrading
      to this firmware is the increased possibility of data corruption in certain
      error and timing conditions


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDC
changelog:
  -      This maintenance revision improves data integrity.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-2.1
changelog:
  -      Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine "sweeping" of the media surface.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7-2.1
changelog:
  -      Reduced the occurrence probability of PMIC busy issue by stopping PLP capacity check to reduce i2c access to PMIC.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4ICRHPK3-15.1
changelog:
  -      The issue affects SSDs with an HPE firmware version prior to 4ICRHPK3 that may result in SSD failure starting at 4,700 hours of operation, neither the SSD nor the data can be recovered, after the SSD failure occurs.
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00111900en_us>
        * Fixed CA <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00126514en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> MPK7825Q
changelog:
  -      Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -      Addresses performance degradation issue for read/write workloads when drive exceeds 65535 hours (~7.5 years) of Power-On hours.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK6
changelog:
  -      Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
        * For more information, CA is published at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-3.1
changelog:
  -      Fixes an issue in previou version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-3.1
changelog:
  -      Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5-13.1
changelog:
  -      Fixes a rare link loss issue and adds enhancements for drive reliability.
        * After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive.
        * The new drive bootloader code will be activated after the next drive power cycle.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
        * Adding other logging and FW enhancements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configuratioans.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDB
changelog:
  -      Fixes the Firmware version HPDB adds compatibility with the latest NAND generation for continuity of supply.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7-2.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * High Security Enablement support FIPs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6-2.1
changelog:
  -      Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -      Addresses a hot plug reporting concern
        * Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -      Improves data integrity. 
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -     This maintenance revision improves data integrity. The risk of not upgrading
      to this firmware is the increased possibility of data corruption in certain
      error and timing conditions. Several maintenance items are included in this
      firmware revision that reduce the probability of hangs and provide a minor
      performance improvement.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -      This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.0.11
changelog:
  -     Added support for Intel Xeon Scalable Performance 3200, 4200, 5200, 6200 and
      8200 series processors.
      
      Added support for HPE system performance monitoring and workload performance
      advisor. This feature also requires Integrated Lights-Out (iLO) firmware
      version 1.40 or later.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.0.11
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an extremely rare issue where updates to the Intel Server Platform
      Services (SPS) firmware may fail.
      
      **Known Issues:**
      
      This flash component will report the Current Revision of the Innovation Engine
      FW as "n/a" when updating the Innovation Engine FW. This does not affect the
      flash update or impact how the Innovation Engine FW operates.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.1.2-2.1
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added support for HPE Persistent Memory featuring Intel Optane DC Persistent
      Memory.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.2.0
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an extremely rare issue where Processor or Memory temperature
      reporting may not be collected properly by the platform and the system fans
      may be running faster than expected. This issue has been seen occasionally
      after a server reboot and is typically corrected with a subsequent server
      reboot.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.2.2
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an extremely rare issue where processor or memory temperature
      reporting may stop reporting properly or report a constant reading after
      servers have been operating over an extended period of time without an AC
      power cycle.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.2.3
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Address an issue where Innovation Engine (IE) Firmware may be unresponsive and
      iLO Firmware may report "Update Failed" after flashing the Innovation Engine
      (IE) Firmware via RESTful update.  The flash will have been performed
      successfully, but the system must be reset for IE Firmware to function
      properly.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.3.0
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours. On some systems this could result in a brief drop in CPU utilization or
      network traffic lasting less than a second.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.3.0-3.1
changelog:
  -     *Important Notes:**
      
      Ver. 0.2.3.0(C) contains updates to the firmware packaging and is functionally
      equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if
      a previous component revision was used to upgrade the firmware to version
      0.2.3.0.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours. On some systems this could result in a brief drop in CPU utilization or
      network traffic lasting less than a second.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.3.0-6.1
changelog:
  -     *Important Notes:**
      
      Ver. 0.2.3.0(F) contains updates to the firmware packaging and is functionally
      equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision F if
      a previous component revision was used to upgrade the firmware to version
      0.2.3.0.
      
      This Linux component is compatible with Service Pack for ProLiant
      2024.11.00.00.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours. On some systems this could result in a brief drop in CPU utilization or
      network traffic lasting less than a second.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.2.3.0-8.1
changelog:
  -     *Important Notes:**
      
      Ver. 0.2.3.0(H) contains updates to the firmware packaging and is functionally
      equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision H if
      a previous component revision was used to upgrade the firmware to version
      0.2.3.0.
      
      This Linux component is compatible with Service Pack for ProLiant
      2024.11.00.00.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours. On some systems this could result in a brief drop in CPU utilization or
      network traffic lasting less than a second.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.0.20
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial version of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.0.22
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.0.22-3.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.0.22(C) contains updates to the firmware packaging and is
      functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with
      Revision B if a previous component revision was used to upgrade the firmware
      to version 1.0.0.22.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.0.22-6.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.0.22(F) contains updates to the firmware packaging and is
      functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with
      Revision F if a previous component revision was used to upgrade the firmware
      to version 1.0.0.22.
      
      This Linux component is compatible with Service Pack for ProLiant
      2024.11.00.00.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.0.22-9.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.0.22(I) contains updates to the firmware packaging and is
      functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with
      Revision I if a previous component revision was used to upgrade the firmware
      to version 1.0.0.22.
      
      This Linux component is compatible with Service Pack for ProLiant
      2024.11.00.00.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Innovation Engine (IE) may improperly reset every 24
      hours.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40-1.1
changelog:
  -     The following issues are resolved in this version:
      
        * User interface fixes and improvements.
        * The text "R&D Server" is incorrectly displayed in the iLO web interface navigation pane.
        * Fixed an issue where power supply status changes may be delayed.
        * Device Inventory could display a parse error under Internet Explorer 11 when certain PCI Cards are installed.
        * Improved shared network port out-of-band LOM resuscitation to reduce the scope and the frequency of system power-on/power-off during systems shutdown/reboot.
        * iLO communication issues in certain configurations where a server is set to Auto-Power-On after an AC power cycle.
      
      SECURITY FIXES:
      
        * HPESBHF03907
      
      For the latest security bulletins and vulnerabilities, please visit:  
      <https://support.hpe.com/hpesc/public/home>  Security best practices:
      
      Please refer to the HPE Integrated Lights-Out 5 Security Technology Brief for
      the latest on security best practices at:  
      [http://www.hpe.com/support/ilo5-security-en](http://www.hpe.com/support/ilo5
      -security-enn)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.43
changelog:
  -     This version adds support for the following features and enhancements:
      
      
      
       \- Added VLAN tagging support on iLO Dedicated NIC for non-blades.
      
      \- Modified the iLO auto-generated SNMP EngineID to not change upon iLO
      resets.
      
       \- Modified Embedded Remote Support (eRS) service events to properly report
      Windows 2019.
      
       \- Reduced the number of Redfish resource change events sent.   Removed
      watching of fields that
      
         change frequently.
      
      \- BIOS Admin password will NOT cause iLO to act as if Require Host
      Authentication is Enabled


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.43
changelog:
  -     The following issues are resolved in this version:
      
      \- Fix for potential firmware use of system memory after free, which could
      lead to an OS exception or
      
         memory corruption under Linux or ESX when using hpilo driver.  It was not
      an issue for Windows.
      
       \- Fix so iLO 5 can connect to switch when both are set to 100 Full Duplex.
      
       \- Fixed REST call so that "ilorest -d serverlogs --selectlog=IML --clearlog
      rc 255" does not fail when
      
         it should succeed.
      
      \- Fixed problem with erroneously logging an IML event for "exceeding power
      capacity threshold" when
      
         it should not be logged.
      
       \- Modified time zone string for "Asia/Taipei" to "Beijing, Chongqing, Hong
      Kong, Urumqi, Taipei, Perth"
      
      \- Only send Remote Support type 1000 events for Critical IML events when they
      should be sent
      
      
      
      SECURITY FIXES:
      
      \- HPESBHF03917
      
        For the latest security bulletins and vulnerabilities addressed in this
      version, please visit:
      
        <https://support.hpe.com/hpesc/public/home>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.45
changelog:
  -     \- Fixed problem introduced in iLO 5 v1.43 which could cause an HTTP
      connection to be refused under high activity of REST calls.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.46
changelog:
  -     Fixed potential problem of Gen10 Synergy server NIC port being down after
      complete Synergy frame power cycle.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.48-1.1
changelog:
  -      Implemented the set server info command for all the DCi supporting options in previous versions of iLO 5 which may reset NIC settings during iLO 5 update.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.15
changelog:
  -      Fixed an issue where HPE OneView returned inconsistent datatype for network
      adapter function ID for a server hardware call.
      
       Fixed an issue where the GPU sensor data and status were missing during
      nVidia driver load and unload transitions randomly.
      
       Fixed an issue where during an HPE iLO firmware upgrade to SSP SY
      2024.11.02, the RDE VAS went into a freeze state and caused a halt in the
      upgrade process.
      
       Fixed an issue where HDDs connected through the SR controller were not
      consistently displayed in the HPE iLO 5 Firmware Inventory page or via the
      Redfish API.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.16
changelog:
  -      Fixed an issue with the backup_start event to protect the back up process
      from auxiliary power cycle interruptions. This fix includes the implementation
      of IML logging.  
       Fixed an issue with HPE iLO to display power supplies as per power supply
      type AC or DC.  
       Fixed an issue where iLO could report the network status as "Unknown"
      instead of "OK" on Raider platforms.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.17
changelog:
  -     Fixed an issue where an improper shutdown was detected in the OS after HPE iLO
      firmware upgrade through COM.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.18
changelog:
  -      For the NVIDIA HGX A100 8-GPU 80GB baseboard, iLO UI previously displayed the product part number starting with 935-xxx-xxx-xxx. With this enhancement, the product part number is updated to display 699-xxx-xxx Board Part Number.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.18
changelog:
  -      Fixed an issue where iLO does not display Intel GPU FRU details, such as part number, serial number, and product version.
        * Fixed an issue where iLO is unable to successfully flash the firmware on the Lisbon1 card.
        * Fixed a Secure Shell (SSH) File Descriptor leak in iLO CLI that can cause iLO to stop responding to SSH requests after repeated connections as commonly seen with SSH fencing agent.
        * Fixed an issue by adding the handling of EAP packet with Identifier Value 0 in iLO.  Fixed an issue where SNMP fails to display a proper output when storage condition fails.
        * Fixed an issue where iLO displays an incorrect local time in regions that do not observe Daylight Saving Time (DST).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.19
changelog:
  -     Please refer to the [iLO 5 v3.19 Release
      Notes](https://support.hpe.com/hpesc/public/docDisplay?docId=sd00007713en_us)
      for the Enhancements included in this Release.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.19
changelog:
  -     Please refer to the [iLO 5 v3.19 Release
      Notes](https://support.hpe.com/hpesc/public/docDisplay?docId=sd00007713en_us)
      for the Fixes included in this Release.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.303
changelog:
  -     See the release document in Download Product Binaries page from Product
      Summary of the firmware product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 05.01.04.303
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the Server Platform Services (SPS) Firmware provides
      mitigations for SPS security vulnerabilities documented as CVE-2020-24509.
      These security vulnerabilities are documented in Intel Security Advisory
      INTEL-SA-00459.  These issues are not unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -      This product now supports Red Hat Enterprise Linux 9.2.
        * The product addressed some Broadcom code structure utilization.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -     This product addressed that platform might encounter a POST failure when
      NX1-based controllers and some storage controllers combines.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.37.0
changelog:
  -      This product fixed error checking sequence for Firmware Management Protocol API.
        * This product fixed NC-SI commands to interoperate more benefit with iLO.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42.0
changelog:
  -      This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
        * This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during  Reboot.
        * This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.21.0
changelog:
  -      This product addresses an issue where getting Transceiver Temperature erroneous unit value.
        * This product addresses an issue when NC-SI Query Pending NC PLDM Response is wrong when NIC does not have a pending PLDM request.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22.0
changelog:
  -      This product enhances NC-SI implementation for multiple physical mediums.
        * This product enhances firmware debug trace improvement.
        * This product enhances to add more debug data to coredump.
        * This product enhances to increase resource to handle the NC-SI commands concurrently.
        * This product enhances to set LLDP Disable request if DCBX is enabled.
        * This product enhances multiple lossless traffic classes support.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22.0
changelog:
  -      This product addresses issue about IPVlan support.
        * This product fixes an issue where the Transceiver Temperature is an erroneous unit value.
        * This product addresses to exposing MCTP discovery through NICCLI utility.
        * This product fixes an issue where ethtool shows wrong module type when a port is in a certain breakout mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.0
changelog:
  -      This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
        * This product enhances the coredump feature in the BNXT driver for improved diagnostics.
        * This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.0
changelog:
  -      This product fixes the issue where RDMA connections are not getting connected.
        * This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
        * This product fixes the issue where the OCP module experiences link width degradation in the system.
        * This product fixes the issue where PXE boot does not work with VLAN configurations.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.24.0
changelog:
  -      This product fixes an issue where VLAN-tagged packets were looped back or misrouted due to VEB behavior, causing TCP retransmissions and link instability in LACP configurations.
        * This product fixes an issue where the adapter did not correctly report all supported link speeds (1G/10G/25G) via ethtool.
        * This product fixes an issue where Broadcom NXE NICs could overheat and become unrecognized when MCTP was disabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.0
changelog:
  -     This product enhancement enables a self-shutdown feature to prevent
      overheating when certain monitoring features are disabled.  
      It applies only to newer hardware that originally shipped with firmware
      version 223.1.135.7 or higher and is not enabled on earlier revisions.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.0
changelog:
  -      This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
        * This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
        * This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.5
changelog:
  -      This product fixes the issue where the firmware version details failed to update and the card showed as not operational after upgrading BCM5741x adapters 
        * This product fixes the issue where failed to detect a 10GBASE-LR SFP+ causing incorrect defaults and a link failure.
        * This product fixes the issue where iLO BMC shared  IP on OCP NIC, link flap occurred during OS reboot.
        * This product fixes the issue where the adapter is unable to establish link after rebooting when using the "HPE 10GBASE-T SFP+ 30m RJ45 Transceiver" HPE PN 813874-B21 with vendor PN SP7053-HPE.
        * This product fixed the issue where the System cannot power on and IML log shows Critical Temperature Threshold Exceeded.
        * This product fixed the issue where NICs with LR cables and transceivers showing SR mode.
        * This product fixed the issue where PCIe Negotiated Link Width is displaying as x4 instead of x8.
        * This product fixes the issue where the Firmeare update failed on BCM57416 4 MB flash cards .


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 226.1.107000-2.1
changelog:
  -      This product addressed the NC-SI passthrough algorithm for some FRU-reading commands from platform side.
        * This product addressed the packet forwarding rule while receiving packet which is bigger than 9600 jumbo size.
        * This product addressed the link failure under FreeBSD OS after changing link speed.
        * This product addressed the failure of bringing up VFs of SRIOV when doing on and off switch.
        * This product addressed adapter not responsive when work under heavy loading with 128 VMs.
        * The product addressed status reporting  of PLDM sensor monitoring with BMC.
        * This product addressed the link-flap after link down or warm boot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.38.0
changelog:
  -      This product addresses a problem that might cause a BSOD when trying to reboot the system from operating Windows systems due to NIC internal software mutex problem.
        * This product addresses an issue where a random missing DHCP IP address occurs when the iLO shared NIC port is used, due to NIC internal software mutex problem.
        * This product addresses an issue that might cause the POST to get stuck due to NIC internal software mutex problem.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.39.0
changelog:
  -      This product fixes an issue where a dummy Serial Number is seen immediately after update the adapter firmware to version 2.30 (or earlier).
        * This product fixes an issue where Wake-on-LAN not working is seen.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42.0
changelog:
  -      This product fixes the issue where unique serial number in VPD (Vital Product Data) will be altered to a dummy serial number
        * This product fixes the issue where Failing to Obtain iLO shared NIC DHCP IP and MCTP EID Missing during Reboot.
        * This product fixes the issue where PCI Temperature sensor might be missing intermittently causing Increase in Fan Speed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.28.0
changelog:
  -     This product addresses an issue where the firmware installation exceeds the
      expected time by using Oneview to update Firmware with 568FLR-MMSFP+.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34.0
changelog:
  -      This product fixes an issue where the FW upgrade failed with 562SFP+/x710 adapters due to timeout.
        * This product fixes an issue where the port 2 and port 3 do not always report link down when link is down on 4-Port Ethernet Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 226.1.107.0-2.1
changelog:
  -      This product addressed device lost symptom after continuously ungraceful restart on BCM57414 OCP3 adapter.
        * This product addressed some RDE pattern format for some LLDP properties.
        * This product addressed the NC-SI passthrough with BMC when device is under idle mode.
        * This product addressed new mechanism for loading factory default.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30.0
changelog:
  -      This product now supports Red Hat Enterprise Linux 9 Update 3.
        * For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/download/19622/


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34.0
changelog:
  -      This product removes RDE AutoSpeedNegotiationEnabled property.
        * This product fixes an issue where the FW upgrade failed with 562SFP+/x710 adapters due to timeout.
        * This product fixes an issue where the port 2 and port 3 do not always report link down when link is down on 4-Port Ethernet Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.35.0
changelog:
  -      This product fixed PXE Boot does not work when DMA remapping is enabled in AMD platform.
        * This product fixed hang issue when run SCT tool with DriverModelTest.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 8.55.12-3.1
changelog:
  -      This product contains support PLDM firmware upgrade base improvements.
        * This product addresses an overheat issue on the network adapters as below,
      
      HPE Ethernet 10Gb 2-port BaseT QL41132HLRJ Adapter  
      HPE Ethernet 10Gb 2-port BaseT QL41132HQRJ OCP3 Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6-3.1
changelog:
  -     *The following changes have been made in sub-version 1.0.6(B):**
      
        * Product rebuilt to support FIPS mode enabled OS environment.
      
      **The following changes have been made in sub-version 1.0.6(A):**
      
        * Product rebuilt to have the new SHA 384 signature.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6-4.1
changelog:
  -     *Firmware for the following device has been updated to 14.32.1010:**
      
        * P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6-4.1
changelog:
  -     *The following issues have been fixed in component sub-version 1.0.6(C):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **The following changes have been made in component sub-version 1.0.6(B):**
      
        * Product rebuilt to support FIPS mode enabled OS environment.
      
      **The following changes have been made in component sub-version 1.0.6(A):**
      
        * Product rebuilt to have the new SHA 384 signature.
      
      **The following issues have been fixed in firmware version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.7
changelog:
  -     *Firmware for the following device has been updated to 14.32.1900:**
      
        * P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **No new features or changes have been included in firmware version 14.32.1900.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.8
changelog:
  -     *Firmware for the following device has been updated to 14.32.1904:**
      
        * P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **No new features or changes have been included in firmware version 14.32.1904.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.8
changelog:
  -     *The following issues have been fixed in firmware version 14.32.1904:**
      
        * Missing QoS settings caused connectivity disruptions and packet drops.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *New features and changes included in version 14.32.1908:**
      
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.20-3.1
changelog:
  -     *The following issues have been fixed in component version 1.0.20(B):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **The following issues have been fixed in firmware version 2.42.5044 :**
      
        * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode.
      
      **The following issues have been fixed in firmware version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      **The following issues have been fixed in firmware version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.21
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1010:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.35.3502:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      **New features and changes included in firmware version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     
      
      **New features and changes included in firmware version 16.35.3502:**
      
        * Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.21
changelog:
  -     *The following issues have been fixed in firmware version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      **No fixes are included in firmware version 16.35.3502.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.22
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1900:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.35.4030:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **No new features or changes have been included in firmware version 14.32.1900.**
      
      
      
      **New features and changes included in firmware version 16.35.4030:**
      
        * Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.22
changelog:
  -     *No fixes have been included in firmware version 14.32.1900.**
      
      
      
      **The following issues have been fixed in firmware version 16.35.4030:**
      
        * VF FLR would get stuck when its PF triggered the FLR as well.
        * Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.23
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1904:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.35.4506:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **No new features or changes have been included in firmware version 14.32.1904.**
      
      
      
      **New features and changes included in version 16.35.4506:**
      
        * Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.23
changelog:
  -     *The following issues have been fixed in firmware version 14.32.1904:**
      
        * Missing QoS settings caused connectivity disruptions and packet drops.
      
      
      
      **The following issues have been fixed in firmware version 16.35.4506:**
      
        * Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.24
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1908:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.35.8002:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      **New features and changes included in version 14.32.1908:**
      
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.
      
      **New features and changes included in version 16.35.8002:**
      
        * Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.24
changelog:
  -     *No fixes are included in version 14.32.1908.**
      
      **The following issues have been fixed in version 16.35.8002:**
      
        * Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.25
changelog:
  -     *No fixes are included in version 14.32.1912.**
      
      
      
      **No fixes are included in version 16.35.8008.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13-4.1
changelog:
  -     *The following issues have been fixed in component version 1.0.13(C):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      
      
      **Fixes in firmware version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in firmware version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14
changelog:
  -     *irmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.4030:**
      
        * Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15
changelog:
  -     *irmware for the following devices has been updated to 12.28.2302:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **New features and changes included in version 16.35.4030:**
      
        * Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15
changelog:
  -     *No new issues have been fixed in version 12.28.2302.**  
      
      
      **The following issues have been fixed in version 16.35.4030:**
      
        * VF FLR would get stuck when its PF triggered the FLR as well.
        * Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.16
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2302:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.4506:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **New features and changes included in version 16.35.4506:**
      
        * Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.16
changelog:
  -     *No new issues have been fixed in version 12.28.2302.**
      
      
      
      **The following issues have been fixed in version 16.35.4506:**
      
        * Incorrect MPLS packets discards flow occurred when the GLOBAL pause capability was disabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.17
changelog:
  -     *Firmware for the following devices has been updated to 12.28.4704:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.8002:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.4704:**
      
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.
      
      
      
      **New features and changes included in version 16.35.8002:**
      
        * Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10-3.1
changelog:
  -     *The following issues have been fixed in component version 1.0.10(B):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      
      
      **The following issues have been fixed in firmware version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.  
      
      
      **The following issues have been fixed in firmware version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.11
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1010:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.35.3502:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
      
      
      
      **New features and changes included in firmware version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.  
      
      
      **New features and changes included in firmware version 16.35.3502:**
      
        * Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.11
changelog:
  -     *The following issues have been fixed in firmware version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.  
      
      
      **No fixes are included in firmware version 16.35.3502.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1900:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.35.4030:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **No new features or changes have been included in firmware version 14.32.1900.**
      
      
      
      **New features and changes included in firmware version 16.35.4030:**
      
        * Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *No fixes have been included in firmware version 14.32.1900.**  
      
      
      **The following issues have been fixed in firmware version 16.35.4030:**
      
        * VF FLR would get stuck when its PF triggered the FLR as well.
        * Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1904:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.35.4506:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
      
      **Security Hardening Enhancements**  
      This release contains important reliability improvements and security
      hardening enhancements. NVIDIA recommends upgrading your devices firmware to
      this release to improve the devices' firmware security and reliability.  
      
      
      **No new features or changes have been included in firmware version 14.32.1904.**
      
      
      
      **New features and changes included in version 16.35.4506:**
      
        * Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4- bytes aligned.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1908:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.35.8002:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)  
      
      
      **New features and changes included in version 14.32.1908:**
      
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.  
        
      
      
      **New features and changes included in version 16.35.8002:**
      
        * Enhanced performance of firmware exception path handling to better support increased numbers of configured SR-IOV instances.
        * This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your devices firmware to this release to improve the devices' firmware security and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14
changelog:
  -     *No fixes are included in version 14.32.1908.**  
        
      **The following issues have been fixed in version 16.35.8002:**
      
        * Firmware failed to scan the correct CQs for the PF after the FW entered into the CQ recovery mode., resulting in CQs for the PF not being recovered.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.11.0
changelog:
  -     This product addresses an issue where the modification on string format of
      firmware update payload.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.21.3
changelog:
  -     This product now supports Red Hat Enterprise Linux 8 Update 6, Liunx 9 and
      SUSE Linux Enterprise Server 15 Service Pack 4.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22.0
changelog:
  -     This product addresses an issue where Max Number of Virtual Machine
      Queues/Physical Function shows zero value in AHS


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.28.50
changelog:
  -      **This product addressed the firmware update failure problem which may cause NIC FW corruption.**
        * **This product addressed the firmware update failure problem while the platform secure boot being enabled.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.29.2
changelog:
  -     This product now supports Red Hat Enterprise Linux 8 update 4 and SUSE Linux
      Enterprise Server 15 Service Pack 3


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.30.2
changelog:
  -      This product addresses a cosmetic change in the adapter configuration page to reflect that DCBx is enabled and as long as LLDP is enabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.31.4
changelog:
  -     This product now supports Red Hat Enterprise Linux 8 Update 6, Liunx 9 and
      SUSE Linux Enterprise Server 15 Service Pack 4


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.4-4.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.4 (D) contains updates to the component packaging and is functionally
      equivalent to ver. 1.0.4.  It is not necessary to upgrade with Revision (D) if
      a previous component revision was used to upgrade the firmware to ver. 1.0.4.
      
      **Firmware Dependencies:**
      
      Integrated Lights-Out 5 (iLO 5) Firmware version 1.15 and System ROM version
      1.20 or later
      
      **Enhancements/New Features:**
      
      Added support for Dynamic Power Capping. For proper operation, please ensure
      that Integrated Lights-Out 5 (iLO 5) Firmware version 1.15 and System ROM
      version 1.20 or later are updated on the server.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.7
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added support for AMD EPYC 7002 Generation Processors. ROM version 2.00 or
      later is required to enable the support. This version of firmware does not
      include any changes for platforms with Intel Processors or AMD EPYC 7001
      Generation Processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.7-2.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.7 (B) contains updates to the component packaging and is functionally
      equivalent to ver. 1.0.7. It is not necessary to upgrade with Revision (B) if
      a previous component revision was used to upgrade the firmware to ver.
      1.0.7.This is the initial version for HPE Gen10 Plus servers.  
      
      
      **Firmware Dependencies:**
      
      For HPE ProLiant DL325/DL385 Gen10 servers, ROM version 2.00 or later is
      required to enable the support. iLO5 version 1.40 or above is required to
      upgrade to this version.
      
      **Enhancements/New Features:**
      
      Added support for AMD EPYC 7002 Generation Processors on HPE ProLiant
      DL325/DL385 Gen10 servers. ROM version 2.00 or later is required to enable the
      support. This version of firmware does not include any changes for Gen10
      platforms with Intel Processors or AMD EPYC 7001 Generation Processors. iLO5
      version 1.40 or above is required to upgrade to this version.
      
      This is the initial version for HPE Gen10 Plus servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.7-3.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.7 (C) contains updates to the component packaging and is functionally
      equivalent to ver. 1.0.7. It is not necessary to upgrade with Revision (C) if
      a previous component revision was used to upgrade the firmware to ver.
      1.0.7.This is the initial version for HPE Gen10 Plus servers.
      
      **Firmware Dependencies:**
      
      For HPE ProLiant DL325/DL385 Gen10 servers, ROM version 2.00 or later is
      required to enable the support. iLO5 version 1.40 or above is required to
      upgrade to this version.
      
      **Enhancements/New Features:**
      
      Added support for AMD EPYC 7002 Generation Processors on HPE ProLiant
      DL325/DL385 Gen10 servers. ROM version 2.00 or later is required to enable the
      support. This version of firmware does not include any changes for Gen10
      platforms with Intel Processors or AMD EPYC 7001 Generation Processors. iLO5
      version 1.40 or above is required to upgrade to this version.
      
      This is the initial version for HPE Gen10 Plus servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.8
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue of inaccurate temperature readings when the actual temperature
      exceeds 100 C on Proliant Gen10 Plus servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to
      upgrade to this version.
      
      **Problems Fixed:**
      
      Fixed an issue where the CPU may not restore to original working frequency
      after turning off Power Capping.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.1.0
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed a rare issue where CPU could become stuck at its lowest working
      frequency when dynamic power capping was enabled on AMD-based systems.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.1.2
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to
      upgrade to this version.
      
      **Enhancements/New Features:**
      
      Changed certain behaviors to avoid machine power failures when significant
      power consumption devices are introduced.
      
      **Problems Fixed:**
      
      None
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.12
changelog:
  -     1\. In support of Micron 256Mb SPI ROM on the latest Shiner board
      
      2\. Provided a proper downgrade restriction to ensure FW compatibility with
      the latest HW


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.14
changelog:
  -     1. Fix intermittent expander/drives missing issue during repeatedly power cycles
        2. Provide a proper downgrade restriction to ensure firmware compatibility with the latest flashes


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.15
changelog:
  -      Add support of new flash on the latest expander board.
        * Provided a proper downgrade restriction to ensure firmware compatibility with the latest flashes.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.39
changelog:
  -     It's the transition version before migrating to newer version 0.39(B). 0.39
      doesn't have any function change or issue fix, just to activate the new
      Product ID naming.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.39
changelog:
  -      It's the transition version before migrating to newer version 0.39(B). 0.39 doesn't have any function change or issue fix, just to activate the new Product ID naming.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.39-2.1
changelog:
  -      Modify Product ID to "A4200 Gen10P LFF" and "A4200 Gen10P SFF" to distinguish the different generation expander backplane.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.61
changelog:
  -      Added support for for Local Key Management SED adapter password.
        * Added support for reporting surface scan metrics for SSA, SSACLI.
        * Added support for improving secure erase time for disks supporting the WRITE SAME command.
        * Added support for a new persistent event log policy that overwrites old events with the most recently occurred events.
        * Added support PLDM firmware update
        * Added support PLDM firmware update for UBM.
        * Enable Redfish Name property of Volume resource which is optional on create. The value is the same as DisplayName property.
        * Report VendorID, ProductID and location informations for enclosure SEPs.
        * Redfish POST request to perform the Drive.Actions.#SecureErase ACTION will be rejected with the extended error message ResourceInUse if the targeted Drive is a SED that is not in the original factory state(OFS).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.61
changelog:
  -      Fixed an issue where to create RAID 60 on 24 SATA SSDs resulted in controller lockup.
        * Fixed a performance drop issue on RAID 5 logical drives with 50/50 cache ratio on a 256K sequential read workload.
        * Fixed a parity inconsistency after RAID rebuild restarted with a new drive replacement.
        * Fixed an issue where a transforming logical drive fails when the controller is abruptly rebooted after logical drive deletion.
        * Fixed an issue where the logical drive failed during the heal array transformation.
        * Fixed an issue where rebuild does not start on an array with the spare disk.
        * Fixed an issue where the VDM requests were not being serviced in a timely manner when the controller was under high load.
        * Fixed controller lockup during clear configuration after SmartCache logical drive is moved from P-Series to E-Series controller.
        * Fixed an issue where not all permitted values were published to the WriteCachePolicy@Redfish.AllowableValues in VolumeCapabilities.
        * Fixed an issue where the VolumeCapabilities resource can be published with incorrect values for WriteCachePolicy@Redfish.AllowableValues when the controller's battery is charging.
        * Fixed an issue where the ControllerPasswordAccepted Redfish alert was sent with incorrect ControllerPasswordEntered messageId.
        * Fixed an issue where a drive's ServiceLabel is sometimes erroneously published with a leading zero on its Port number.
        * Fixed an issue where Redfish alerts generated early in the boot sequence were not reported to iLO.
        * Fixed an issue where a Redfish Volume create request is erroneously accepted when the request payload contains a WriteCachePolicy value conflicting with the existing cache configuration.
        * Fixed an issue where the ControllerPreviousError alert was sent with incorrect ControllerPreviouseFailure messageId and severity.
        * Fixed an issue where the BatteryCharging alert was sent with an incorrect severity on certain controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 7.43
changelog:
  -      Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
        * Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
        * Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
        * Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
        * Fixed an issue where the surface scan period was not reset to default after factory reset.
        * Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
        * Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
        * Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
        * Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
        * Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
        * Fixed an MCTP communication issue in AMD Turin 2P configurations.
        * Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
        * Fixed an issue with improper support checking for the secure erase command.
        * Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
        * Fixed an issue which threw wrong error code, 'InternalError' when creating an array on controller that is waiting on adapter password.
        * Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
        * Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
        * Fixed an issue in which drive resource does not match with Chassis for empty bay.
        * Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
        * Fixed an issue where HealthRollup shows warning during normal state.
        * Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
        * Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 7.81
changelog:
  -      Added SSD life expectancy monitoring. 
        * Added support to require privileged operations token for all RDE ACTION operations, including Drive.Reset and Storage.SetEncryptionKey, improving security for data-destructive actions. 
        * Added support to provide meaningful updateInterval values for Numeric Sensor PDRs, setting 5 seconds for controller temperature and 60 seconds for drive temperature sensors. 
        * Enhanced the calculation of CapacityBytes@Redfish.AllowableNumbers for Volume Capabilities. The maximum allowable value is now set to the larger of (a) the largest free space range on any existing array, or (b) the sum of unassigned drives with a common interface and media type. 
        * Enhanced DriveMetrics support by updating the schema version from 1.0.0 to 1.2.0, adding reporting for ReadIOKiBytes and WriteIOKiBytes properties. 
        * Added an enhancement to display drive vendor and model name as separate fields in the Disk Information menu, improving clarity and ease of drive identification. 
        * Added support to securely transfer encryption keys in remote key management mode. 
        * Enhanced drive writes cache status reporting in HII.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 7.81
changelog:
  -      Fixed an issue where SEDs reverting to foreign after controller reboot due to the otherwise owned flag not being saved to the datastore. 
        * Fixed an issue where firmware crash/lockup during NDSR (Non-Disruptive Software Reset) due to a NULL pointer reference when handling a failed drive during logical drive rebuilt. 
        * Fix 4Kn foreign SED being imported into a 512B logical drive due to incorrect failure handling, which could start a rebuild on an incompatible drive and ultimately fail. 
        * Fixed an issue where multiple logical drives incorrectly showing REBUILDING simultaneously due to rebuild status not being updated properly during queued transformation and rebuild processes 
        * Fixed an issue where master key change failure on Managed SED logical drives due to LU cache flush requests conflicting with the password update process. 
        * Fixed an issue where physical drive Predictive Failure status not reported correctly by tools and iLO. 
        * Fixed an issue where controller lockup during surface scan caused by stale internal resources when handling Unrecoverable Read Errors (UREs) in unmapped logical drive regions. 
        * Fixed an issue where uncorrectable DDR ECC errors could be reported at boot due to cache being accessed before initialization. 
        * Fixed an issue where the controller could lock up (0x3120C) when enabling MCP due to duplicate routing entries from flooded BMC requests. 
        * Fixed an issue where SATA drives could be incorrectly reported as hot-removed during spin-up by adjusting the dampen timer to align with vendor-specified TTR values. 
        * Fixed an issue where the controller could lock up (0x1E30) under high I/O workloads when configuration changes occurred simultaneously with a LUN reset. 
        * Fixed an issue where RAID 0 could hang with I/O timeouts and LUN resets during Predictive Spare Rebuild. 
        * Fixed an issue where the RAID controller could incorrectly report Online Firmware Activation as enabled. Firmware now checks support during PQI initialization and sets or clears the feature flags accordingly. 
        * Fixed an issue where drives in some enclosures could show bay number 255 after the enclosure was powered on and hot-plugged, by adding handling for additional SCSI not ready status codes until the enclosure becomes ready. 
        * Fixed an issue where Micron 6550 SED drives could fail to create a Secured Volume due to insufficient timeout during the TCG Revert process. 
        * Fixed an issue where the controller Health state from PLDM PDRs could differ from the Storage.Status.HealthRollup value in RDE, by synchronizing the reporting logic. 
        * Fixed an issue where SSD firmware updates could fail in dual path configurations due to PLDM errors, by sending Test Unit Ready commands to clear check conditions before SCSI passthrough operations. 
        * Fixed an issue where Battery Redfish Alerts contained an incorrect OriginOfCondition pointing to a StorageController instead of the Battery resource. 
        * Fixed an issue where RDE UPDATE operations on a Volume's ReadCachePolicy could incorrectly appear successful during a CBE rekey, by adjusting the cache update logic to return accurate results regardless of cache status. 
        * Fixed an issue where the HotspareActivationPolicy allowable values incorrectly included OnDriveFailure for RAID 0 volumes with a dedicated spare, by adding configuration checks to ensure only valid values are shown. 
        * Fixed an issue where there is a mismatch in Overall Health State and Logical Volume State during RPI, with sensors reporting Warning (Overall Health) while RDE READs ( Logical Volume State) showed OK; reporting OK during RPI is exxpected behavior. 
        * Fixed an issue where ProtectedWriteBack could incorrectly appear as an allowable WriteCachePolicy in RDE READs even without a backup power source, by requiring the power source to be connected and fully charged before publishing the option. 
        * Fixed an issue where an RDE READ on certain unsupported Drive resources could cause a controller lockup, by adding bounds checking in the firmware API. 
        * Fixed an issue where deleting volumes through PLDM Type 6 could cause a controller lockup if other PLDM commands were sent simultaneously. These commands now return NOT_READY when a long-running RDE operation is in progress. 
        * Fixed an issue where disk utilities could display an invalid box number for drives after failing over to an alternative path, by ensuring only valid controller-provided information is shown. 
        * Fixed an issue where an incorrect error message was shown in HII when creating a logical drive on a locked SED, by updating the error message to correctly reflect SED encryption.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 8.00
changelog:
  -      Logical drive information menu: Enhanced to display the association between failed data drives and active spares upon drive failure.
        * "Added support for the standardized Operation property in PLDM Operations arrays, providing schema-defined operation enums as below:
      
                 - Drive Resource -- Rebuild/Sanitize/Encrypt
      
                 - Volume Resource -- Initialize/Rebuild/Encrypt/ChangeRAIDLayout/ChangeStripSize/Resize.
      
                 The legacy OperationName property remains available and is now marked as deprecated."
      
        * Added support for StorageController status conditions ResetRecommended and ResetRequired. When configuration changes require a system reboot to take effect, the controller reports the status through both Status.Conditions and Redfish event messages.
        * Enhanced RDE error messaging to provide clearer error descriptions for Volume DELETE and SED-enabled CREATE operations, returning detailed messages directly in the response payload instead of generic ExtendedInfo references.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 8.00
changelog:
  -      Fixed an issue that prevented drive rebuilds from restarting after unexpected power loss when media exchange was accepted in auto-replace spare configurations.
        * Fixed an issue that caused auto-replace spare activation during the LOOSE_CABLE state, which could swap data drives prematurely and lead to volume failure and potential data integrity issues.
        * Fixed an issue where IOPS could drop on large-capacity HDDs during Consistency Check under 4K random write workloads in RAID 1 configurations.
        * Fixed an issue no-battery write cache (NBWC) can be enabled by the user in the event of a battery failure, unless the cache module itself is experiencing an error.
        * Fixed an issue where ATA passthrough IDENTIFY DEVICE (0xEC) commands issued from BMC could time out due to incorrect transfer length handling.
        * Fixed an issue where SSD array creation with non-deterministic drive ordering could incorrectly disable Acceralted IO on some drives, leading to performance degradation.
        * Fixed an issue where the fault LED did not illuminate for a hot-removed data drive during RAID rebuild with auto replace spare enabled.
        * Fixed an issue where the system could become unresponsive with lockup code as 0x1E00 when multiple out-of-band management requests were sent concurrently for the same session.
        * Fixed an issue where failed or missing drives were not correctly indicated when listing drives in the HII disk utilities menu.
        * Fixed an issue where PLDM Type 6 volume creation could fail on certain controllers that do not support volume caching or the IOPerfModeEnabled feature. Volume creation and update requests that explicitly disable these features (for example, setting cache policies to Off or IOPerfModeEnabled to false) are now handled correctly and will no longer be rejected.
        * Fixed an issue where RDE READ could incorrectly report a split mirror backup volume as Enabled instead of StandbyOffline when the original primary volume was created via RDE CREATE. Volume usage identification was corrected to ensure accurate status reporting.
        * Fixed an issue where DriveMetrics.PowerOnHours could be incorrectly reported as zero for SSDs on certain platforms. Power-on hours reporting was updated by drive type,  NVMe drives reporting with DriveMetrics.NVMeSMART.PowerOnHours, SAS and SATA HDDs reporting a null value.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.01.04.381-2.1
changelog:
  -     This image contains the latest Intel Server Platform Services (SPS) Firmware
      which contains mitigations for security vulnerability CVE-2020-0545. This
      issue is not unique to HPE Servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.01.04.381-2.1
changelog:
  -     *Important Notes:**
      
      The Ver. 04.01.04.381(B) flash component contains an updated flash image. The
      actual firmware is exactly the same as was delivered with the original ver.
      04.01.04.381 flash component. The previous flash component had an issue that
      caused flashing to intermittently fail. It is not necessary to upgrade with
      Revision B if a previous component Revision was successfully used to upgrade
      the firmware to version 04.01.04.381 or for systems that originally shipped
      with version 04.01.04.381 firmware.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where systems configured with older versions of the Server
      Platform Services (SPS) Firmware, such as version 04.00.00.288 or older, may
      become inoperable after flashing to SPS firmware version 04.01.04.381. This
      releases contains an updated flash component for SPS Firmware 04.01.04.381
      which allows direct flashing from older firmware versions to the latest.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.01.04.423
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2020.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the Server Platform Services Firmware provides mitigations
      for security vulnerability documented as CVE-2020-8755. This security
      vulnerability is documented in Intel Security Advisory INTEL-SA-00391. This
      issue is not unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.01.04.505
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2021.1 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This version of the Server Platform Services (SPS) Firmware addresses an issue
      where not all PCIe devices will be managed properly by the system when there
      are more than 16 PCIe devices present in the platform. This would include PCIe
      devices in PCIe slots or NVMe drives. This issue would typically manifest
      itself as iLO Firmware not properly reporting thermals from a device when a
      server was in this heavily loaded configuration.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.01.04.601
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2021.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU.2021.2 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.01.04.804-2.1
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2022.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Addressed an issue where Intel reference systems were observed to
      intermittently fail to power on during extensive reboot testing.  This issue
      has not been reported on HPE servers.  This version of the Intel SPS firmware
      has been released as part of the Intel 2022.2 IPU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.01.05.105
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This
      version of the SPS 04.01.05.105 should be paired with System ROM 3.40
      (01/16/2025) or later.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU 2025.1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.04.04.058
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added support for Intel Optane Persistent Memory.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.04.04.062
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version of the System ROM contains updates aligned with the INTEL Whitley
      BKC WW52.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.04.04.202
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the INTEL PLR3.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.04.04.603
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This
      version of the SPS should be paired with System ROM 2.00 (02/22/2024) or
      later.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the Server Platform Services Firmware provides mitigations
      for security vulnerability documented as CVE-2023-35191. This issue is not
      unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.04.04.702
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This
      version of the SPS 04.04.04.702 (2.30_01_06_2025) should be paired with System
      ROM 2.30 (01/16/2025) or later.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU 2025.1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 04.04.04.802
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.3 guidance. This
      version of the SPS 04.04.04.802 (2.50_07_24_2025) should be paired with System
      ROM 2.50 (08/06/2025) or later.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the Server Platform Services Firmware provides mitigations
      for security vulnerability documented as CVE-2025-20067. This issue is not
      unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.40_01-16-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.P for AMD 1st Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added new Microsoft Option Rom UEFI CA 2023 secure boot key.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.42_02-21-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added pop-up message for all Intelligent Provisioning boot paths to warn users
      of the risk of data loss.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.50_03-21-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.M for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.Q for AMD 1st Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.M for
      AMD 2nd Generation EPYC processors.
      
      This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.Q
      for AMD 1st Generation EPYC processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.60_09-05-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.R for AMD 1st Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where changing BIOS settings via Redfish would fail if a
      BIOS update was performed during the same boot.
      
      Remove Expired SUSE and VMware Certificates.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.70_01-09-2026
changelog:
  -     This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for
      AMD 2nd Generation EPYC processors.
      
      This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.S
      for AMD 1st Generation EPYC processors.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.70_01-09-2026
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the SEV-SNP feature failed on AMD 2nd Generation
      "Rome" EPYC processors.
      
      Addressed an issue where the iLO Remote Console could become unresponsive when
      a warning message appeared in the RBSU menu.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.72_04-01-2026
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.S for AMD 1st Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Updated HPE branding logos across all boot screens (early POST, late POST,
      System Utility, and BGRT) to reflect the new HPE corporate identity.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.80_05-28-2026
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.Q for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.T for AMD 1st Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Resolved potential system stability issues related to buffer validation in
      hardware error handling routines during System Management Mode operations on
      different-socket (Rome) configurations.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.30_10-04-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where the system may reboot infinitely when a faulty PCIE card
      was installed.
      
      Fixed an issue where the firmware versions of iLO and Backplane showed
      incorrectly.
      
      Addressed an issue where NS204i may not be identified as an NVMe device.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.72_05-16-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.M for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang at POST when there are 8TB system
      memory and E810 NIC card installed.
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.80_09-05-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the SEV/SNP feature would not function correctly on
      the DL325 Gen10 Plus v2 server.
      
      Addressed an issue where changing BIOS settings via Redfish would fail if a
      BIOS update was performed during the same boot.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.90_10-03-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the SEV/SNP feature would not function correctly on
      the DL325 Gen10 Plus server.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.92_11-27-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.N for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.H
      for AMD 3rd Generation EPYC processors.
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.N for
      AMD 2nd Generation EPYC processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.00_01-09-2026
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J
      for AMD 3rd Generation EPYC processors.
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.P for
      AMD 2nd Generation EPYC processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.02_03-05-2026
changelog:
  -     This revision of the System ROM includes mitigations for CVE-2026-22796 and
      CVE-2024-38798 security vulnerabilities.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.02_03-05-2026
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC
      processors. This revision of the System ROM includes the mitigations for
      CVE-2026-22796 and CVE-2024-38798 security vulnerabilities.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system encounter a Red Screen of Death(RSOD) when
      booting Windows Server 2022 after the Microsoft Windows Production PCA 2011
      certificate had been removed from the Secure Boot DB.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.04_04-02-2026
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.J
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.P for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where ESKM (Enterprise Secure Key Manager) server keys
      could be generated with invalid bytes, potentially causing Self-Encrypting
      Drive (SED) unlock failures. Keys are now validated upon generation and
      corrected during drive unlock operations if previously affected.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.70_03-21-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.G
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.M for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system may encounter RSOD and fail to update
      firmware while performing firmware update.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.72_05-16-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.M for AMD 2nd Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang at POST when there are 8TB system
      memory installed with certain configuration.
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.40_01-16-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel
      IPU2025.1 updates.
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.01.05.105.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system would uses UUID for IPV6 DHCP even when
      DUID-LLT is selected.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.42_02-21-2025
changelog:
  -     Added pop-up message for all Intelligent Provisioning boot paths to warn users
      of the risk of data loss.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.42_02-21-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.01.05.105.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system iLO remote console might hang in glyph
      loop error handling when the System Utilities Language is set to Japanese.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.50_04-17-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.01.05.105.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might have false IML message "Processor X,
      DIMM Y - This NVDIMM is NOT a HPE SmartMemory NVDIMM".
      
      Addressed an issue where the system might trigger BitLocker Recovery after
      reboot.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.60_08-06-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Purley
      IPU2025.3 update. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 04.01.05.201.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system RBSU setting change might not take effect
      when the System ROM is being updated.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.62_01-09-2026
changelog:
  -     Added a new RBSU service option for supporting MMCFG base at 1.5GB
      
      Updated the warning message wording of "Intelligent Provisioning" for OEM.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.62_01-09-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.01.05.201.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system iLO Remote Console could become
      unresponsive when a warning message appeared in RBSU
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.64_02-05-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.01.05.201.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where BIOS would not retry power calibration when requested
      by iLO in cases where power samples were incorrect, preventing dynamic power
      capping from being enabled or accessed.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_06-13-2025
changelog:
  -     Added Uncore Frequency RAPL to system RBSU (System Configuration >
      BIOS/Platform Configuration (RBSU) > Power and Performance Options >Uncore
      Freq RAPL).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_06-13-2025
changelog:
  -     *Important Notes:**
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Maximum/Minimum Uncore Frequency values in system
      configuration RBSU might still be configurable in some non-editable cases.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50_08-06-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Whitley
      IPU2025.3 update. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system RBSU setting change might not take effect
      when the System ROM is being updated.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.52_10-03-2025
changelog:
  -     *Important Notes:**
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where megacell batteries might not manifest correctly.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.54_01-09-2026
changelog:
  -     Added a new RBSU service option for supporting MMCFG base at 1.5GB
      
      Updated the warning message wording of "Intelligent Provisioning" for OEM.
      
      Added CPU C1 Auto Demotion/ UnDemotion option in System Configuration >
      BIOS/Platform Configuration (RBSU) > Power and Performance Options


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.54_01-09-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.04.04.802 (2.50_07_24_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system PXE boot in legacy mode might fail when
      using the Intel I350-T4 OCP NIC.
      
      Addressed an issue where the system might display spurious interrupt message
      during Linux boot up.
      
      Addressed an issue where the system iLO Remote Console could become
      unresponsive when a warning message appeared in RBSU
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.62_03-05-2026
changelog:
  -     Added support for ASIX USB to Ethernet adapter driver version 3.3.2, resolving
      PXE boot stability issues with ASIX AX88179A chipset adapters and eliminating
      system reboot loops during PXE operations.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.62_03-05-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Whitley
      IPU2026.1 RC update. This version of the System ROM should be paired with
      Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the mitigation for CVE-2026-22796
      security vulnerability.
      
      Addressed a critical SMM (System Management Mode) execution issue where
      corrected error handling code for non-memory or non-PCIe errors would access
      non-SMRAM memory, causing page fault exceptions. The fix caches environment
      variables in SMM via Constructor to prevent accessing non-SMRAM memory during
      SMM execution.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.64_04-01-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where ESKM (Enterprise Secure Key Manager) server keys
      could be generated with invalid bytes, potentially causing Self-Encrypting
      Drive (SED) unlock failures. Keys are now validated upon generation and
      corrected during drive unlock operations if previously affected.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.50_04-17-2025
changelog:
  -     Removed Expired SUSE and Vmware Certificates.
      
      Improved detection and interaction with certain PCIe cards during UEFI HBA
      discovery process.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.52_02-21-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2025.1 guidance. Thisversion of the System ROM
      should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system iLO remote console might hang when the
      System Utilities Language is set to Japanese.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.60_05-16-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Mehlow
      IPU 2025.2 update. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 05.01.05.005.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.70_08-08-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2025.3 guidance. This version of the System ROM
      should be paired with Server Platform Services (SPS) Firmware 05.01.05.103.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU 2025.3 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.72_01-09-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 05.01.05.103.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system iLO Remote Console could become
      unresponsive when a warning message appeared in RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.74_04-01-2026
changelog:
  -     Updated HPE branding logos across all boot screens (early POST, late POST,
      System Utility, and BGRT) to reflect the new HPE corporate identity.
      
      Enabled "BIOS log to AHS every boot" by default after a ROM update; users can
      disable via RBSU.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.74_04-01-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 05.01.05.103.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Mitigates CVE-2024-38798 through an EDK2 fix that clears password keystroke
      buffers after entry to avoid potential information disclosure.
      
      Addressed ESKM key generation/shortening issue to prevent SED unlock failures
      by validating/regenerating malformed keys.
      
      Fixed Power Calibration retry handling bug that could prevent expected power
      calibration behavior when requested by iLO.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.76_05-28-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 05.01.05.103.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Resolved a security vulnerability where a NULL pointer dereference could cause
      a system crash during boot if an internal memory allocation failed during the
      ExitBootServices or boot option launch sequence.
      
      Addressed an issue where the Minimum Processor Idle Power Core C-State and
      Minimum Processor Idle Power Package C-State options were not appearing in
      System Configuration (RBSU) under Power and Performance Options on ML30 Gen10
      and DL20 Gen10 platforms.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.52_02-21-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2025.1 guidance. This version of the System ROM
      should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system iLO remote console might hang when the
      System Utilities Language is set to Japanese.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.40_04-18-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system Intel PCH model name is unknown in RBSU
      System information.
      
      Addressed an issue where the system might log into the wrong DIMM index in the
      Server Configuration Lock detection log after removing the system DIMM.
      
      Addressed an issue where the system iLORest might time out.
      
      Addressed an issue where the system might RSOD when performing firmware update
      via Firmware Management Protocol.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_06-13-2025
changelog:
  -     *Important Notes:**
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Maximum/Minimum Uncore Frequency values might
      still be configurable when Uncore Frequency Scaling is set to AUTO from
      OneView.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.60_02-05-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Whitley
      IPU2026.1 RC update. This version of the System ROM should be paired with
      Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where systems configured with Secure Boot may experience a
      Red Screen of Death upon removal of Microsoft Windows Production PCA
      certificates from the Secure Boot database.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.62_03-05-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Whitley
      IPU2026.1 RC update. This version of the System ROM should be paired with
      Server Platform Services (SPS) Firmware 04.04.04.925 (2.60_12_05_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed a critical SMM (System Management Mode) execution issue where
      corrected error handling code for non-memory or non-PCIe errors would access
      non-SMRAM memory, causing page fault exceptions. The fix caches environment
      variables in SMM via Constructor to prevent accessing non-SMRAM memory during
      SMM execution.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.40_05-16-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Tatlow
      IPU 2025.2 update. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system may encounter RSOD and fail to update
      firmware while performing firmware update.
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50_08-06-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2025.3 guidance. This version of the System ROM
      should be paired with Server Platform Services (SPS) Firmware 06.00.03.708
      (2.50_07_25_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with IPU 2025.3 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.52_01-09-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.00.03.708 (2.50_07_25_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system iLO Remote Console could become
      unresponsive when a warning message appeared in RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.60_02-05-2026
changelog:
  -     This version is in compliance with IPU 2026.1 guidance.
      
      Enabled PXE boot capability for certain USB NICs, which will appear in the One
      Time Boot Menu.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.60_02-05-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.00.03.708 (2.60_01_28_2026). This version of the System ROM
      contains updates aligned with the Intel Product Update (IPU) version
      IPU.2026.1 guidance.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where systems configured with Secure Boot may experience a
      Red Screen of Death upon removal of Microsoft Windows Production PCA
      certificates from the Secure Boot database.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.62_03-05-2026
changelog:
  -     Improved PXE boot stability with certain chipset adapters and eliminating
      system reboot loops during PXE operations.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.62_03-05-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.00.03.708 (2.60_01_28_2026).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the mitigation for CVE-2026-22796
      security vulnerability.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.64_04-01-2026
changelog:
  -     *Important Notes:**
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where ESKM (Enterprise Secure Key Manager) server keys
      could be generated with invalid bytes, potentially causing Self-Encrypting
      Drive (SED) unlock failures. Keys are now validated upon generation and
      corrected during drive unlock operations if previously affected.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.62_03-05-2026
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.00.03.708 (2.60_01_28_2026).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Mitigated reported security vulnerabilities.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.64_04-01-2026
changelog:
  -     *Important Notes:**
      
      None
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where ESKM (Enterprise Secure Key Manager) server keys
      could be generated with invalid bytes, potentially causing Self-Encrypting
      Drive (SED) unlock failures. Keys are now validated upon generation and
      corrected during drive unlock operations if previously affected.
      
      **Known Issues:**
      
      None


