# changelog

author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14.1055
changelog:
  -      Firmware may skip rebuilding chunks of data on the new drive when the drive rebuild is performed followed by a Redfish Read On certain HPE servers with NS204i adapter card.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14.1063
changelog:
  -     Fix known issue on v1055 regarding RDE dictionary broken which will cause
      unexpected FW upgrading error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.5.6-1.1
changelog:
  -      Improved the fan calibration during server power-on.
        * Improved the format of the Chassis CPLD version reported in Integrated Lights-Out 5 (iLO 5) and the Chassis Controller CLI.
        * Improved the fan behavior when a server blade stops communicating with the Chassis Controller.
        * Added support for Murata Power Supply Kits.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.5.9-1.1
changelog:
  -     Added Fan-FailSafe which continually checks to see if an installed, powered
      blade is communicating with the HPE Edgeline Chassis Controller. If there is
      no communication for 90 seconds or more, the fans will go to full blow. When
      the blade begins to communicate again, the fans will return to normal.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.08.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.02.048.0
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial version of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.005.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th Generation Intel Xeon Scalable Processors and 5th
      Generation Intel Xeon Scalable Processors. This version of the SPS should be
      paired with System ROM 2.16 (01/30/2024) or later.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may enter standby mode on Power-On Self-Test
      (POST) during warm reset cycle.
      
      Addressed an issue where system may stop responding at "Memory Initialization
      - Start" during Power-On Self-Test (POST).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.047.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th and 5th Generation Intel Xeon Scalable Processors.
      This version of the SPS should be paired with System ROM 2.20.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with Intel uPLR1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.075.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th and 5th Generation Intel Xeon Scalable Processors. This
      version of the SPS should be paired with System ROM 2.40.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with Intel uPLR3 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.089.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th and 5th Generation Intel Xeon Scalable Processors.
      This version of the SPS should be paired with System ROM 2.50.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This version contains the latest Server Platform Services firmware for 4th and
      5th Generation Intel Xeon Scalable Processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.089.0-2.1
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Product Update (IPU) version IPU 2025.2 guidance.
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th and 5th Generation Intel Xeon Scalable Processors.
      This version of the SPS should be paired with System ROM 2.50.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This version contains the latest Server Platform Services firmware for 4th and
      5th Generation Intel Xeon Scalable Processors. This version is in compliance
      with IPU 2025.2 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-3.1
changelog:
  -      Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Adds support for a second source drive pre-amp, and improves reliability with an updated direct offline scan algorithm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> GPK5-7.1
changelog:
  -      Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.
        * Assert fixes, logging enhancements and all current firmware improvements.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA-3.1
changelog:
  -      Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-4.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Improves performance in certain file systems and implements fixes for several of the previous firmware's shortcomings.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA
changelog:
  -      This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDC
changelog:
  -      This maintenance revision improves data integrity.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7
changelog:
  -      Reduced the occurrence probability of PMIC busy issue by stopping PLP capacity check to reduce i2c access to PMIC.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK6
changelog:
  -      Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
        * For more information, CA is published at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-2.1
changelog:
  -      Fixes an issue in previou version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-2.1
changelog:
  -      Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
        * Adding other logging and FW enhancements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA
changelog:
  -      Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configuratioans.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG8
changelog:
  -      Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7-2.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * High Security Enablement support FIPs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Addresses a hot plug reporting concern
        * Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs and provide a minor performance improvement


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -      Improves data integrity. 
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.63
changelog:
  -      Fixed an issue where fetching the email ID for AD login users fails in a cross-domain setup, affecting the ability to send TFA tokens.
        * Fixed an issue that involves a fallback mechanism to retrieve the email address from the parent domain if it cannot be fetched from the cross-domain.
        * Fixed an issue on gpio expander settings for Nokia Cloud RAN SmartNIC Accelerator.
        * Fixed an issue where the drives in the Embedded SATA controller were displayed in the label of Un-configured Drives instead of Drives.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.64
changelog:
  -      Support for PIN-based HPE iLO6 onboarding into COM instead of PCID.
        * Support for binding data center Secure Control Module (DC-SCM) and Host Processor Module (HPM) components through the HPE iLO UI on supported Modular Hardware Platforms.
        * Support for reporting boot progress states and boot time of a system through standard DMTF Redfish API.
        * Support for version reporting in GUI through the Rest API for Side Band Board CPLD, Switch Board CPLD, Power Distribution Board CPLD, Riser MCU FW and OCP interposer CPLD for HPE ProLiant Compute Gen 12 DL320, and HPE ProLiant Compute Gen 12 DL340 SP servers.
        * Added a threshold to the power for NVMe drives so that the server can meet the acoustic and operating temperature target.
        * Added support to Add to Queue pane to move the task to the start of the installation queue.
        * Added support to display the total estimated fan power consumption of all the fans in the server in the power meter graphs.
        * Support for LLDP (link layer discovery protocol) over a Dedicated Network that is used by network devices for advertising their identity, capabilities, and neighbors on a LAN based on IEEE technology. However, this is not applicable for HPE Synergy servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.64
changelog:
  -      Fixed an issue where HPE iLO RIBCL queries generated incorrect CAPACITY VALUE responses.
        * Fixed an issue where fetching the email details of LDAP user where DistinguishedName containing special characters were causing the two-factor authentication process to fail.
        * Fixed the cpqHoMIBStatusArray status issue that did not get updated with proper details when a drive attached to HPE Smart Array P408i-a SR controller failed or degraded.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.66
changelog:
  -      Ability of HPE iLO to report standard RAS errors for processor, memory, and PCI for HPE Compute ProLiant DL384 Gen12 servers.
        * Ability of the HPE iLO interface to set and obtain the thermal configuration setting called Smooth Cooling along with the other existing configurations.
        * Enabled the Compute Utilization Per Second (CUPS) metrics for Intel Sierra Forest processors. This includes CPU, memory, and I/O utilization and CPU power per socket and CPU average frequency per socket.
        * Added an option using REST API to rotate the ESKM password.
        * Added IML, Redfish and SNMP alerts to report cases of invalid Power Distribution Board (PDB) on ProLiant DL320 Gen12 platform
        * Added support for digit validation in PIN based onboarding of iLO to COM


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.66
changelog:
  -      Fixed an issue where param2 check-in challenge_auth response for NVIDIA adapter failed during SPDM authentication.
        * Fixed an issue where the Kerberos client advertised insecure encryption (RC4, DES) types and rejected the deprecated ones. As a part of this fix, RC4, DES, and 3DES algorithms are removed from the Kerberos requests.
        * Fixed an issue where the MCTP retry mechanism in i2c communication failed. 
        * Fixed an issue where a low value of the HPE iLO reset progress bar time caused mismatch in the configuration during the HPE iLO reset time.
        * Fixed an issue where the IPMI fan's pwm values were set to a default of 255 to calculate dutycycle percentage.
        * Fixed an issue with the time delay between retries for PCIe VDM transmit buffer.
        * Fixed an issue for the sensor values that were reported in the GET_SENSOR response though these sensors were marked as non-supported in the PDR table.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.67
changelog:
  -      Renamed the front OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot
      A and OCP Slot B.
      
       Renamed the rear OCPA and OCPB labeling in REST and HPE iLO UI to OCP Slot A
      and OCP Slot B.
      
       Ability of HPE iLO Redfish to raise a clear event notification for an air
      filter replacement.
      
       Support for Azure Stack HCI 23H2 OS.
      
       Adhered to HPE branding guidelines.
      
       Addition of HPE ProLiant Advanced License to HPE iLO with HPE Compute Ops
      Management.
      
       Support for the Virtual Media Mount URL length increased to 1023 characters.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.67
changelog:
  -      Fixed an issue where there was no VSP output on DL360 Gen11 HPE iLO6 due to
      stack overflow on VSP log buffer handling.  
       Fixed an issue where the memory health status on HPE ProLiant Compute DL384
      platforms appeared to be degraded.  
       Fixed an issue where the fan speed was not set as per the thermal
      configuration due to server device discovery not reaching
      vMainDeviceDiscoveryComplete.  
       Fixed an issue that did not allow to enable mTLS for subscription and
      returned error in loading client private key.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.70
changelog:
  -     This product addresses an issue where network loses IP Address Randomly during
      AC/DC cycle and idling.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -      This product addressed abnormal fan behavior when BCM5719 OCP3 installed.
        * This product addressed the failure of IP dispatch when using BCM5719 LOM as shared iLO networking.
        * This product addressed that platform might encounter a POST failure when NX1-based controllers and some storage controllers combines.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.37.0
changelog:
  -      This product fixed error checking sequence for Firmware Management Protocol API.
        * This product fixed NC-SI commands to interoperate more benefit with iLO.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.38.0
changelog:
  -      This product addresses a problem that might cause a BSOD when trying to reboot the system from operating Windows systems due to NIC internal software mutex problem.
        * This product addresses an issue where a random missing DHCP IP address occurs when the iLO shared NIC port is used, due to NIC internal software mutex problem.
        * This product addresses an issue that might cause the POST to get stuck due to NIC internal software mutex problem.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.39.0
changelog:
  -      This product fixes an issue where a dummy Serial Number is seen immediately after update the adapter firmware to version 2.30 (or earlier).
        * This product fixes an issue where Wake-on-LAN not working is seen.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 226.1.107.0-2.1
changelog:
  -      This product addressed device lost symptom after continuously ungraceful restart on BCM57414 OCP3 adapter.
        * This product addressed some RDE pattern format for some LLDP properties.
        * This product addressed the NC-SI passthrough with BMC when device is under idle mode.
        * This product addressed new mechanism for loading factory default.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.4
changelog:
  -     This product addresses an issue where the adaters isn't recongized with HPE
      Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2  Adapter and HPE Ethernet 10Gb 2-port
      SFP+ X710-DA2 Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30.0
changelog:
  -      This product now supports Red Hat Enterprise Linux 9 Update 3.
        * For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/download/19622/


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.2-3.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.2(C) contains updates to the firmware packaging and is functionally
      equivalent to ver. 1.0.2. It is not necessary to upgrade with Revision C if a
      previous component revision was used to upgrade the firmware to version 1.0.2.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial verison of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.4-3.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.4(C) contains updates to the firmware packaging and is functionally
      equivalent to ver. 1.0.4. It is not necessary to upgrade with Revision C if a
      previous component revision was used to upgrade the firmware to version 1.0.4.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Modified the ADC conversion formula based on the new layout design of Gen11
      AMD platforms.  
      Improved the accuracy of Fast Platform Triggering mechanism on AMD platforms.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.61
changelog:
  -      Added support for for Local Key Management SED adapter password.
        * Added support for reporting surface scan metrics for SSA, SSACLI.
        * Added support for improving secure erase time for disks supporting the WRITE SAME command.
        * Added support for a new persistent event log policy that overwrites old events with the most recently occurred events.
        * Added support PLDM firmware update
        * Added support PLDM firmware update for UBM.
        * Enable Redfish Name property of Volume resource which is optional on create. The value is the same as DisplayName property.
        * Report VendorID, ProductID and location informations for enclosure SEPs.
        * Redfish POST request to perform the Drive.Actions.#SecureErase ACTION will be rejected with the extended error message ResourceInUse if the targeted Drive is a SED that is not in the original factory state(OFS).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.61
changelog:
  -      Fixed an issue where to create RAID 60 on 24 SATA SSDs resulted in controller lockup.
        * Fixed a performance drop issue on RAID 5 logical drives with 50/50 cache ratio on a 256K sequential read workload.
        * Fixed a parity inconsistency after RAID rebuild restarted with a new drive replacement.
        * Fixed an issue where a transforming logical drive fails when the controller is abruptly rebooted after logical drive deletion.
        * Fixed an issue where the logical drive failed during the heal array transformation.
        * Fixed an issue where rebuild does not start on an array with the spare disk.
        * Fixed an issue where the VDM requests were not being serviced in a timely manner when the controller was under high load.
        * Fixed controller lockup during clear configuration after SmartCache logical drive is moved from P-Series to E-Series controller.
        * Fixed an issue where not all permitted values were published to the WriteCachePolicy@Redfish.AllowableValues in VolumeCapabilities.
        * Fixed an issue where the VolumeCapabilities resource can be published with incorrect values for WriteCachePolicy@Redfish.AllowableValues when the controller's battery is charging.
        * Fixed an issue where the ControllerPasswordAccepted Redfish alert was sent with incorrect ControllerPasswordEntered messageId.
        * Fixed an issue where a drive's ServiceLabel is sometimes erroneously published with a leading zero on its Port number.
        * Fixed an issue where Redfish alerts generated early in the boot sequence were not reported to iLO.
        * Fixed an issue where a Redfish Volume create request is erroneously accepted when the request payload contains a WriteCachePolicy value conflicting with the existing cache configuration.
        * Fixed an issue where the ControllerPreviousError alert was sent with incorrect ControllerPreviouseFailure messageId and severity.
        * Fixed an issue where the BatteryCharging alert was sent with an incorrect severity on certain controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.2.2-3.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.2.2(C) contains updates to the firmware packaging and is functionally
      equivalent to ver. 1.2.2. It is not necessary to upgrade with Revision C if a
      previous component revision was used to upgrade the firmware to version 1.2.2.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial verison of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20_11-08-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code TurinPI 1.0.0.2
      for AMD 5th Generation EPYC processors. This revision of the System ROM
      includes AMD reference code GenoaPI 1.0.0.D for AMD 4th Generation EPYC
      processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the "Server Boot Order" in iLO web was not aligned
      with "UEFI Boot Order Control" in RBSU.
      
      Addressed an issue where CPU may not set cTDP to maximum by default.
      
      Addressed an issue where an error message in Linux would indicate TCG log size
      is not compatible.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.30_01-17-2025
changelog:
  -     Added new Microsoft Option Rom UEFI CA 2023 secure boot key.
      
      Added the "Smooth Cooling" selection to the Thermal Configuration option in
      the RBSU\Advanced Options\Fan and Thermal Options. This selection modifies the
      fan speed response to improve acoustics by reducing the rate of fan speed
      changes. This can improve acoustics for workloads which significantly vary CPU
      utilization. Note that this option can result in a small reduction in
      performance due to the short durations of CPU thermal throttling and some
      operating systems, such as Linux, may log CPU thermal throttling events. These
      events do not indicate an issue with the system and can be ignored.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.30_01-17-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code TurinPI 1.0.0.3
      for AMD 5th Generation EPYC processors. This revision of the System ROM
      includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Consistent Device Naming (CDN) may not work when
      it is enabled.
      
      Addressed an issue where the SMBIOS TYPE 4 max speed may be incorrect.
      
      Addressed an issue where the system would use UUID for IPV6 DHCP when
      "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-
      LLT" is selected.
      
      Addressed an issue where the system iLO remote console might hang when the
      System Utilities Language is set to Japanese.
      
      Addressed an issue where the system might bring up a warning message ("ERST:
      [Firmware Warn]: too many record IDs!") in the Linux environment during boot
      up.
      
      Addressed an issue where some strings of "NVMe-oF Configuration and Attempt
      pages" in system RBSU menu are still in English after switching the language
      to a non-English one.
      
      Addressed an issue where the system RBSU menu might list duplicate or
      incorrect network interfaces in the selection page.
      
      Addressed an issue where the system RBSU menu might not display clear drive
      location information.
      
      Addressed an issue where the system may report dmesg error messages (NULL
      net_device) in the Linux environment, or the system may encounter a NIC option
      (MR216) not responding situation.
      
      **Known Issues:**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.32_02-21-2025
changelog:
  -     Added pop-up message for all Intelligent Provisioning boot paths to warn users
      of the risk of data loss.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.32_02-21-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code TurinPI 1.0.0.3
      for AMD 5th Generation EPYC processors. This revision of the System ROM
      includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system may encounter an SMI storm when PCIe error
      disconnect recover (EDR) failed.
      
      Addressed an issue where the system may fail to update NVMe drive firmware.
      
      Addressed an issue where NVMe-oF may not be detected during VMWare
      installation.
      
      Addressed an issue where the system may reboot continuously when PCIE resource
      need to reallocate.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34_03-11-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code TurinPI 1.0.0.3
      for AMD 5th Generation EPYC processors. This revision of the System ROM
      includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might RSOD when performing firmware update
      via Firmware Management Protocol.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.40_03-21-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code TurinPI 1.0.0.4
      for AMD 5th Generation EPYC processors. This revision of the System ROM
      includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system may encounter RSOD and fail to update
      firmware while performing firmware update.
      
      Addressed an issue where the system may encounter RSOD if NVMe-oF target did
      not have partitions.
      
      Addressed an issue where System Power Supply information in SMBIOS type39 is
      incorrect when there are more than 2 PSUs.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_04-09-2025
changelog:
  -     Added help text for "Smooth Cooling" RBSU option.
      
      Added the System Configuration (RBSU) option "PCIe Device
      Configuration/Advanced PCIe Configuration/PCIe Hot-Plug Error Control" and set
      to "Hot-Plug Surprise" by default. This setting has the following Redfish
      property:
      
      /redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_04-09-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code TurinPI 1.0.0.4
      for AMD 5th Generation EPYC processors. This revision of the System ROM
      includes AMD reference code GenoaPI 1.0.0.E for AMD 4th Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where some GPUs may encounter a PCIe lane drop when an
      NS204i-u is installed.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50_05-16-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code TurinPI 1.0.0.5
      for AMD 5th Generation EPYC processors. This revision of the System ROM
      includes AMD reference code GenoaPI 1.0.0.F for AMD 4th Generation EPYC
      processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      Addressed an issue where the messages of "HPE Intelligent Provisioning" is
      incorrect for OEM customers.
      
      Addressed an issue where some options are missing for RBSU knob "Enabled Cores
      per Processor".
      
      Addressed an issue where SMT was not enabled if Enabled Cores per Processor is
      set to less than 8 cores.
      
      Addressed an issue where certain GPU may encounter lane drop issue with
      NS204i-u installed.
      
      Addressed an issue where OCP device cannot be disabled by RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_10-04-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.D
      for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where System Information\Device Inventory in iLO web may
      show unknown entries after enabling bifurcation.
      
      Addressed an issue where One button secure erase (OBSE) report may show
      incorrect Drive Port Number and Box Number for MicroChip SR controllers.
      
      Addressed an issue where system may become stuck after enrolling many
      certificates and signatures.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_01-17-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.E
      for AMD 4th Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system would use UUID for IPV6 DHCP when
      "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-
      LLT" is selected.
      
      Addressed an issue where the system iLO remote console might hang when the
      System Utilities Language is set to Japanese.
      
      Addressed an issue where the system might bring up a warning message ("ERST:
      [Firmware Warn]: too many record IDs!") in the Linux environment during boot
      up.
      
      Addressed an issue where some strings of "NVMe-oF Configuration and Attempt
      pages" in system RBSU menu are still in English after switching the language
      to a non-English one.
      
      Addressed an issue where system RBSU menu might list duplicate or incorrect
      network interfaces in the selection page.
      
      Addressed an issue where the system RBSU menu might not display clear drive
      location information.
      
      Addressed an issue where the "Server Boot Order" in iLO web is not aligned
      with "UEFI Boot Order Control" in RBSU.
      
      Addressed an issue where an error message in Linux would indicate TCG log size
      is not compatible.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50_02-21-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.E
      for AMD 4th Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system may encounter an SMI storm when PCIe error
      disconnect recover (EDR) failed.
      
      Addressed an issue where the system may fail to update NVMe drive firmware.
      
      Addressed an issue where NVMe-oF may not be detected during VMWare
      installation.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.52_03-11-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.E
      for AMD 4th Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might RSOD when performing firmware update
      via Firmware Management Protocol.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60_04-21-2025
changelog:
  -     Added help text for "Smooth Cooling" in system configuration (RBSU) option.
      
      Added the System Configuration (RBSU) option "PCIe Device
      Configuration/Advanced PCIe Configuration/PCIe Hot-Plug Error Control" and set
      to "Hot-Plug Surprise" by default. This setting has the following Redfish
      property:
      
      /redfish/v1/systems/1/bios/settings/PcieHotPlugErrControl


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60_04-21-2025
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.F
      for AMD 4th Generation EPYC processors.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      Addressed an issue where the messages of "HPE Intelligent Provisioning" is
      incorrect for OEM customers.
      
      Addressed an issue where the system may encounter RSOD and fail to update
      firmware while performing firmware update.
      
      Addressed an issue where the system may encounter RSOD if NVMe-oF target did
      not have partitions.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00_04-02-2025
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Removed dynamic power capping support for this release. It is not supported
      for now.
      
      Enabled Spread Spectrum.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_05-10-2025
changelog:
  -     *Important Notes:**
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Swaped PCIe Slot 7 and Slot 8 identifiers.
      
      Fixed SMBIOS to support 12 power supplies.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_12-06-2024
changelog:
  -     Added new Microsoft Option ROM UEFI CA 2023 secure boot key.
      
      Updated the boot device string rules to include the case when VMD is enabled.
      
      Added "Smooth Cooling option" in the "RBSU\Advanced Options\Fan and Thermal
      Options".


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42_12-06-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.075.0 (2.40_10_23_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might detect memory uncorrectable error
      while system has been idle for extended period of time.
      
      Addressed an issue where the system might hang at memory initialization after
      restoring system setting to factory default.
      
      Addressed an issue where system RBSU menu might list duplicate or incorrect
      network interfaces in the selection page.
      
      Addressed an issue where some strings of in the System
      Configuration\RBSU\Network Options\NVMe-oF Configuration\NVMe-oF Attempt are
      still in English after switching the language to non-English version.
      
      Addressed an issue where the NVMe image description in RBSU might be incorrect
      when VROC is enabled.
      
      Addressed an issue where the system RBSU menu might not display clear drive
      location information.
      
      Addressed an issue where fans might rapidly ramp up and then back down.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.44_01-17-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.075.0 (2.40_10_23_2024).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system would use UUID for IPV6 DHCP when DUID-LLT
      is selected.
      
      Addressed an issue where the system would report Unsupported DIMM
      Configuration when having 16+0 DIMM mixed rank population.
      
      Addressed an issue where the system Consistent Device Naming (CDN) is not
      working in Windows Server.
      
      Addressed an issue where the system memory address translation did not match
      with system limitation.
      
      Addressed an issue where the system iLO remote console might hang when the
      System Utilities Language is set to Japanese.
      
      Addressed an issue where the system might bring up a warning message ("ERST:
      [Firmware Warn]: too many record IDs!") in the Linux environment during boot
      up.
      
      Addressed an issue where the system Max/Min Uncore Frequency value did not be
      set to default value after loading default settings.
      
      **Known Issues:**
      
      None.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.46_02-21-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.075.0 (2.40_10_23_2024).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might RSOD when both TXT and TDX are
      enabled.
      
      Addressed an issue where the system might fail to update NVMe drive firmware.
      
      Addressed an issue where the system might not be able to detect disk removal
      via NVMe-oF during VMware installation.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.48_03-11-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.075.0 (2.40_10_23_2024).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might RSOD when performing firmware update
      via Firmware Management Protocol.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50_04-22-2025
changelog:
  -     Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS
      Settings for FlexRAN v2.0.
      
      Added help text for "Smooth Cooling" in system configuration (RBSU) option.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50_04-22-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      Addressed an issue where the messages of "HPE Intelligent Provisioning" is
      incorrect for OEM customers.
      
      Addressed an issue where the Intel PCH model name might be unknown in system
      configuration (RBSU) -> System information.
      
      Addressed an issue where the system might fail to detect EDSFF SED drives with
      Intel VROC.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50_04-22-2025-2.1
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel IPU
      2025.2 updates.
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.089.0 (2.50_04_01_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      Addressed an issue where the messages of "HPE Intelligent Provisioning" is
      incorrect for OEM customers.
      
      Addressed an issue where the Intel PCH model name might be unknown in system
      configuration (RBSU) -> System information.
      
      Addressed an issue where the system might fail to detect EDSFF SED drives with
      Intel VROC.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50_04-22-2025
changelog:
  -     Disabled AMP Prefetch for 'vRAN' Workload Profile to aligned with Intel BIOS
      Settings for FlexRAN v2.0.
      
      Added help text for "Smooth Cooling" in system configuration (RBSU) option.
      
      Introduced an enhancement to prevent potential system shutdowns caused by
      specific CPU temperature errors.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.46_02-21-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.075.0 (2.40_10_23_2024).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might RSOD when both TXT and TDX are
      enabled.
      
      Addressed an issue where the system might fail to update NVMe drive firmware.
      
      Addressed an issue where the system might not be able to detect disk removal
      via NVMe-oF during VMware installation.
      
      Addressed an unexpected fan control issue that triggered sustained high speeds
      on Alletra 4120 LFF SKU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.52_07-11-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.02.04.035.0 (1.50_04_10_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where duplicated and incorrect task status were logged iLO
      Event Log.
      
      Addressed an issue where multiple KEK instances appeared after enrollment of
      KEK certificate from Redfish API.
      
      Addressed an issue where dbr were not deleted after deleting all keys via
      Redfish API.
      
      Addressed an issue where Negotiated Link Width in RBSU showed incorrect
      information after configurating bifurcation.
      
      Addressed an issue where system may encounter RSOD after enrollment of an
      improper certfifcate.
      
      Addressed an issue where the Logical Drive name was cleared in RBSU after
      leaving configuration page of MR controller.
      
      Addressed an issue that Battery Failure IML message log may be incorrectly
      logged for MR Controller with Smart Storage Battery.
      
      Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword
      may not work.
      
      Addressed a secure boot database synchronizing issue via Redfish API.
      
      Addressed an issue where system may encounter a RSOD while updating SAS drive
      FW via HPE Service Packs, including, but not limited to, VMware ESXi Online
      HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02
      (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July
      2024).
      
      Addressed an issue where updating NVMe-oF initiator name would not take
      effect.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60_09-05-2024
changelog:
  -     Added Redfish API for Boot Progress.
      
      Updated Chinese and Japanese translation.
      
      Added the System Configuration (RBSU) option "Network Options/NVMe-oF
      Configuration". This setting has the following Redfish property:
      
      /redfish/v1/systems/1/Bios/oem/hpe/nvmeof/


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60_09-05-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Catlow
      PLR1 guidance. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 06.02.04.042.0 (1.60_09_05_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where One button secure erase (OBSE) report may show
      incorrect Drive Port Number and Box Number for MicroChip SR controllers.
      
      Addressed an issue where system may stuck after enrolling many certificates
      and signatures.
      
      Addressed an issue where Driver Health Message may show twice in POST when
      drive is removed and cold boot.
      
      Addressed an issue where NS204i may not be identified as NVMe device.
      
      Addressed an issue where the virtual serial port may still have message output
      when the serial port is set to 'Disabled' or 'Physical Port'.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_12-06-2024
changelog:
  -     This version always set "RBSU\Power and Performance option\Enhance C state" to
      "Enabled" to mitigate processor Vmin shift instability issue per Intel's
      recommendation.
      
      Added new Microsoft Option Rom UEFI CA 2023 secure boot key.
      
      Added "Smooth Cooling option" in the RBSU\Advanced Options\Fan and Thermal
      Options.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_12-06-2024
changelog:
  -     *Important Notes:**
      
      This is the initial version to support Intel Xeon 6300 series processors. This
      version of the System ROM contains updates aligned with the Intel Catlow
      Refresh BKC CWL.1.A.4420.00.
      
      This version always set "RBSU\Power and Performance option\Enhance C state" to
      "Enabled" to mitigate processor Vmin shift instability issue per Intel's
      recommendation.
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.03.04.048.0 (2.10_12_03_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where some strings of "NVMe-oF Configuration and Attempt
      pages" in system RBSU menu are still in English after switching the language
      to non-English version.
      
      Addressed an issue where system RBSU menu might list duplicate or incorrect
      network interfaces in the selection page.
      
      Addressed an issue where the system RBSU menu might not display clear drive
      location information.
      
      Addressed an issue where the "Server Boot Order" in iLO web is not aligned
      with "UEFI Boot Order Control" in RBSU.
      
      Addressed an issue where an error message in Linux would indicate TCG log size
      is not compatible.
      
      Addressed an issue where the "Pending Change light" may be on even if there is
      no option has been modified in RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12_02-21-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Catlow
      Refresh BKC CWL.1.A.4420.00. This version of the System ROM should be paired
      with Server Platform Services (SPS) Firmware 06.03.04.048.0 (2.10_12_03_2024).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the PSU fan keeps running at high speed after system
      shutdown.
      
      Addressed an issue where system may fail to update NVMe drive firmware.
      
      Addressed an issue where NvmeOf system may not be detected during VMWare
      installation.
      
      Addressed an issue where the maximum frequency of the processor shows
      incorrectly after enable or disable Intel Turbo Boost.
      
      Addressed an issue where the system would use UUID for IPV6 DHCP when
      "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-
      LLT" is selected.
      
      Addressed an issue where the Consistent Device Naming (CDN) may not work.
      
      Addressed an issue where the RBSU value is not aligned with the actual C1E
      setting.
      
      Addressed an issue where the system might bring up a warning message ("ERST:
      [Firmware Warn]: too many record IDs!") in the Linux environment during boot
      up.
      
      Updated SMBIOS type 4 processor max speed to 5700 MHz.
      
      Addressed an issue where the PSU fan would keep running at high speed after
      system shutdown.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.14_03-11-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.03.04.048.0 (2.10_12_03_2024).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system might RSOD when performing firmware update
      via Firmware Management Protocol.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20_03-21-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Catlow
      Refresh MR1 BKC. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system may encounter RSOD and fail to update
      firmware while performing firmware update.
      
      Addressed an issue where the system may encounter RSOD if NVMe-oF target did
      not have partitions.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.22_05-16-2025
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Catlow
      Refresh MR1 BKC. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 06.03.04.058.0 (2.20_03_03_2025).
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Name field of the Logical Drive under MR
      controller page might be missing or changed unintentionally after exiting and
      going back to the MR controller page.
      
      Addressed an issue where the messages of "HPE Intelligent Provisioning" is
      incorrect for OEM customers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.04.033.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Best Known Configuration (BKC) WW09.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Updated Server Platform Services (SPS) Firmware to 06.00.04.033.0 to align
      with the Intel Best Known Configuration (BKC) WW09.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.04.075.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for Intel Sapphire Rapids.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version contains the latest Server Platform Services firmware for Intel
      Sapphire Rapids.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.05.046.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th Generation Intel Xeon Scalable Processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This version contains the latest Server Platform Services firmware for 4th
      Generation Intel Xeon Scalable Processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.005.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th Generation Intel Xeon Scalable Processors and 5th
      Generation Intel Xeon Scalable Processors. This version of the SPS should be
      paired with System ROM 2.10 (11/28/2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may enter standby mode on Power-On Self-Test
      (POST) during warm reset cycle.
      
      Addressed an issue where system may stop responding at "Memory Initialization
      - Start" during Power-On Self-Test (POST).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.02.04.016.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for the Intel Raptor-Lake PCH-S based systems. This version of
      the SPS should be paired with System ROM 1.44 (01/18/2024) or later.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version contains the latest Server Platform Services firmware for the
      Intel Raptor-Lake PCH-S based systems.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.02.04.035.0
changelog:
  -     This version contains the latest Server Platform Services firmware for the
      Intel Xeon E-2400 series processors.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.02.04.035.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for the Intel Xeon E-2400 series processors. This version of
      the SPS should be paired with System ROM 1.50 (05/16/2024) or later.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Intel(R) SPS Firmware may assign duplicate MCTP EIDs
      for adapters.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.02.04.042.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for the Intel Xeon E-2400 series processors. This version of
      the SPS should be paired with System ROM 1.60_09-05-2024.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version contains the latest Server Platform Services firmware for the
      Intel Xeon E-2400 series processors.
      
      This version is in compliance with Intel PLR1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.03.04.048.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for the Intel Xeon E-2400 series processors. This version of
      the SPS 06.03.04.048.0 (2.10_12_03_2024) should be paired with System ROM
      2.10_12-06-2024.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with Intel Catlow RPL-E PLR2 and Intel Catlow
      RPL-E Refresh PV guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.03.04.058.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for the Intel Xeon E-2400 series processors. This version of
      the SPS 06.03.04.058.0 (2.20_03_03_2025) should be paired with System ROM
      2.20_03-21-2025.
      
      Details about reported security vulnerabilities and their mitigation can be
      found at the following link [Security Bulletin Library | HPE Support](https://
      support.hpe.com/connect/s/securitybulletinlibrary?language=en_US).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system may encounter reset loop after updating
      ME/SPS firmware using smart components.
      
      **Known Issues:**
      
      None


