PART NUMBER:  592410-021
FILE NAME:    ilo3_185.bin
TITLE:        Integrated Lights-Out 3 Firmware 1.85

LANGUAGE:  English

DIVISIONS:  Systems
PRODUCTS AFFECTED:
HP ProLiant BL685c G7 Server
HP ProLiant BL680c G7 Server
HP ProLiant BL620c G7 Server
HP ProLiant BL490c G7 Server
HP ProLiant BL465c G7 Server
HP ProLiant BL460c G7 Server
HP ProLiant BL2x220c G7 Server
HP ProLiant DL585 G7 Server
HP ProLiant DL580 G7 Server
HP ProLiant DL385 G7 Server
HP ProLiant DL380 G7 Server
HP ProLiant DL360 G7 Server
HP ProLiant DL120 G7 Server
HP ProLiant ML110 G7 Server
HP ProLiant ML10 G7 Server
HP ProLiant SL390s G7 Server
HP ProLiant SL335s G7 Server
HP ProLiant SL4545 G7 HyperStorage System

OPERATING SYSTEM:
Microsoft Windows Server 2008 R2
Windows Server 2008 W32
Microsoft Windows Server 2008
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Red Hat Enterprise Linux 5 (x86, AMD64/EM64T)
Red Hat Enterprise Linux 6 (x86, AMD64/EM64T)
Red Hat Enterprise Linux 7 (x86, AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86, AMD64/EM64T)
SUSE Linux Enterprise Server 12 (x86, AMD64/EM64T)
VMware ESX/ESXi Server 4.0 / 4.1
VMware vSphere 5.5
VMware ESXi 5.0 
VMware ESXi 5.1 

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  iLO 3 v1.20

BUILD DATE:  May 1, 2015

EFFECTIVE DATE:  May 20, 2015

DESCRIPTION:   Firmware for the Hewlett-Packard Integrated Lights-Out 3 Management Controller

LAST RECOMMENDED OR CRITICAL VERSION: 1.82

PREVIOUS VERSION: 1.82

UPGRADE REQUIREMENTS: RECOMMENDED

FIRMWARE DEPENDENCY: 

- Customers running a version of iLO 3 previous to v1.20 must upgrade to v1.20 before upgrading to this version.  iLO 3 v1.20 can be obtained from the following FTP locations:
Linux:   ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1255562964/v64722
Windows: ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p901462262/v64721
Win64:   ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1728391553/v64720

- For best performance and IPv6 support, HP recommends upgrading to the latest versions of the iLO utilities:
- HPQLOCFG 1.4.0 (replaced CPQLOCFG)
- HP Lights-Out XML Scripting Sample 4.60 bundle
- HPONCFG 4.6.0.0 (Windows)
- HPONCFG 4.5.0.0 (Linux)
- LOCFG.PL 4.60 (included in the HP Lights-Out XML Scripting Sample bundle)
- HPLOMIG 4.60

KNOWN ISSUES: 
- For groups with a large number of Active Directory users, authentication may work intermittently.
   
ENHANCEMENTS:
- Added support for 'Get Sensor Event Enable' command.
- Added support for IPMI over IPv6 when iLO has multiple IPv6 addresses.


FIXES:
- G7 blade servers report that maximum power is allocated after an iLO 3 1.80 firmware upgrade.
- iLO 3 does not accept the 100.64/10 IP address range for an SNTP client.
- iLO 3 LDAP client could fail, if DNS server returns more than 15 IPv6 addresses for LDAP Servers.
- DHCP client could fail to renew IP address.
- Unable to import SSL Certificates with RSASSA-PSS signatures.
- Virtual CDROM could randomly disconnect when booting to Microsoft Deployment Toolkit ISOs.
- Blade server could fail to power ON from Wake-On-LAN.
- iLO doesn't connect to hosts using 100.64/10 IPv4 address range.
- LDAP authentication fails when password contains diacritic characters.
- Inconsistency between IPv4 and IPv6 when FIPS mode is enabled.
- SSO certificate import could fail or, iLO could incorrectly report that the database is full.
- After deleting a SSO Certificate, a corrupted one could be displayed.
- Workaround for IPMITool issue that requires two runs for flags to take effect on boot parameters
- Unhandled Error message when toggling Drive UID while the server is in early POST.
- IML not including complete POST Error message.
- IPMI Get Session Info returning wrong user Id.
- iLO CLI and RIBCL accept invalid iLO host and domain names.
- iLO rebooting when modifying Access Options in the GUI and Port conflicts are detected.
- IPMI Get Interface Capabilities wasnt returning error completion code when querying about SSIF.
- Workaround for IPMITool issue where link=on is defaulted to for set user access causing issues for user additions.
- Added oem parameter 194 (mac address)for get system information parameters
- Added support for ipmi get device guid.
- SL390s G7 with GPUs could log false over temperature warnings into the IML

	
SUPPORT:
- iLO 3 firmware updates and utilities can be found here:  http://www.hp.com/support/ilo3
- IPv6 network communications - dedicated network connection only 
    Supported Networking Features 
    IPv6 Static Address Assignment 
    IPv6 SLAAC Address Assignment 
    IPv6 Static Route Assignment 
    Integrated Remote Console 
    OA Single Sign-On 
    Web Server 
    SSH Server 
    SNTP Client 
    DDNS Client 
    DHCPv6 Address Assignment 
    DHCPv6 Domain, DNS, and NTP Configuration 
    RIBCL over IPv6 
    HP-SIM Single Sign-On 
    WinDBG Support 
    HPQLOCFG/HPLOMIG over an IPv6 connection
    Scriptable Virtual Media
    CLI/RIBCL Key Import over IPv6
    Authentication using LDAP and Kerberos over IPv6
    IPMI 

   Networking Features not supported by IPv6 in this release 
    Shared Network Port Connections  
    SNMP    
    NETBIOS-WINS

DOCUMENTATION:
- iLO 3 User Guide and iLO 3 Scripting and Command Line Guide can be found here:  http://www.hp.com/go/ilo
- Check the online help for additional information about how to use features.  Online help can be accessed from iLO web interface pages by clicking the question mark icon in the upper right-hand corner of each page.

HOW TO USE -
1. Download the appropriate iLO 3 Online Firmware Update Component for your operating system.
2. Install the firmware using one of these options:
    a) Run the component on the host to be updated.  The component will update the iLO 3 firmware and reset the iLO processor.
    b) Extract the firmware from the component. This will place the firmware image file, iLo3_yyy.bin (where yyy represents the firmware version) in the target directory.  You now have         these options:
     i) Login to iLO, navigate to the Update Firmware page, and update the firmware from there.
     ii) Use the HP Lights-Out Configuration Utility (HPQLOCFG) and RIBCL/XML scripts to update iLO 3 across the network.
     iii) Use the HP Online Lights-Out Configuration utility (HPONCFG) and RIBCL/XML scripts to update iLO 3 from the supported host OS.
3. iLO automatically resets after a successful update. There is no need to manually reboot iLO.

Copyright 2015 by Hewlett-Packard Development Company, L.P.

Hewlett-Packard and the Hewlett-Packard logo are trademarks of Hewlett-Packard Development Company, L.P in the U.S. and/or other countries.