# changelog

author: Broadcom Automated Build User
changelog:
  - Changed version to 14.3
  - Updated libdfc library
  - Updated libemsdm library
  - Updated libemulexhbaapi library


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-13
  ----------------------------------

  v6.04 build55:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added MPI Firmware Dump support
  Introduced: v6.04 build55
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build54:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Secure remote port info support
  Introduced: v6.04 build54
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build53:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Check driver for SCM stats support before reading SCM stats
  Introduced: v6.04 build53
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-14
  ----------------------------------

  v6.04 build56:
  -------------

  Defect/Enhancement: Defect
  Problem: LUN QoS API returns "Not Supported"
  Solution: Fixed QoS value read issue in BSG path
  Introduced: v6.04 build21
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61, ISP2031
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-15
  ----------------------------------

  v6.04 build57:
  -------------

  Defect/Enhancement: Defect
  Problem: Delay seen in Application bringup on some inbox drivers
  Solution: Do not perform retries for newer features if driver returns
  	  not supported error
  Introduced: v6.04 build28
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-16
  ----------------------------------

  v6.04 build63:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Allow NVMe specific APIs for newer ISPs
  Introduced: v6.04 build63
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build62:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP FW and MPI FW lockdown bits
  Introduced: v6.04 build62
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build61:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Provide lockdown mode error codes to apps
  Introduced: v6.04 build61
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build60:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added adapter firmware lockdown support
  Introduced: v6.04 build60
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build59:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added EP2989 support
  Introduced: v6.04 build59
  Impact: HW: EP2989
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build58:
  -------------
  Defect/Enhancement: Defect
  Problem: HBA Parameters read fails for newer adapters for inbox drivers
  Solution: Read active HBA Parameters region set from flash
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-17
  ----------------------------------

  v6.04 build75:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Mailbox passthru support
  Introduced: v6.04 build75
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build74:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added NVRAM parameters for SCMR Profile support
  Introduced: v6.04 build74
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build73:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added SCMR Profile support
  Introduced: v6.04 build73
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build72:
  -------------
  Defect/Enhancement: Defect
  Problem: Random apps crash seen when large number of vports present
  Solution: Validate vport memory pointers before accessing it
  Introduced: v6.04 build24
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build71:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added EP2881 and EP2981 support
  Introduced: v6.04 build71
  Impact: HW: EP2881, EP2981
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build70:
  -------------
  Defect/Enhancement: Defect
  Problem: Flash update failure on UOS on ARM (aarch64)
  Solution: Corrected BSG pointers for UOS on ARM
  Introduced: v6.04 build24
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build69:
  -------------
  Defect/Enhancement: Defect
  Problem: Invalid LUN size display for small sized (In MBs) and large sized
  	 (in TBs) NVMe LUNs
  Solution: Use correct read capacity format to get LUN size of NVMe LUNs
  Introduced: v6.04 build52
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build68:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps delay seen with NVMe targets
  Solution: Cache common NVMe target data to avoid multiple calls to NVMe targets
  Introduced: v6.04 build52
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build67:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Session shutdown state macro support
  Introduced: v6.04 build67
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build66:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps crash seen with HBA_RemoveCallback SNIA API
  Solution: Avoid double free of memory freed in HBA_RemoveCallback SNIA API
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build65:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps delay seen with disabled/isolated port
  Solution: Avoid apps retries for disabled/isolated port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build64:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added USCM Phase 2 support
  Introduced: v6.04 build64
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Defect
  Problem: Apps crash seen with disabled/isolated port
  Solution: Fixed apps crash with disabled/isolated port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-18
  ----------------------------------

  v6.04 build81:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added NVRAM parameters for UEFI boot support
  Introduced: v6.04 build81
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build80:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added additional USCM statistics info
  Introduced: v6.04 build80
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build79:
  -------------
  Defect/Enhancement: Defect
  Problem: Port reset seen on all ports of the adapter after HBA parameter update
  Solution: Allowed reset only in HBA parameter modified port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build78:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps crash seen with DPort test with newer firmware
  Solution: Increase response buffer size to read extra data provided by FW
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build77:
  -------------
  Defect/Enhancement: Defect
  Problem: NPIV port seen as physical port on newer OSes
  Solution: Corrected host number list
  Introduced: v6.04 build24
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build76:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added FC-GS-8 based speed definitions
  Introduced: v6.04 build76
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-19
  ----------------------------------

  v6.05 build7:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Use 32bit buffer size of SFP FW update
  Introduced: v6.05 build7
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build6:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added 64G FC SFP FW update support
  Introduced: v6.05 build6
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Remote Port API support
  Introduced: v6.05 build5
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build4:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Secure Port V2 API support
  Introduced: v6.05 build4
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build3:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v6.05 build3
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build2:
  -------------
  Defect/Enhancement: Defect
  Problem: Feature API confilct seen FOAPI
  Solution: Removed conflicting duplicate feature APIs
  Introduced: v6.05 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v6.05 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build90:
  -------------
  Defect/Enhancement: Defect
  Problem: Incorrect NVMe portID seen when multiple targets present
  Solution: Provide valid PortIDs for NVMe targets
  Introduced: v6.04 build85
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build89:
  -------------
  Defect/Enhancement: Defect
  Problem: Incorrect secure target fields seen
  Solution: Provide valid info for secure targets
  Introduced: v6.04 build54
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build88:
  -------------
  Defect/Enhancement: Defect
  Problem: NVRAM dat file update failure on 8G adapter
  Solution: Fixed dat file update on 8G adapter
  Introduced: v6.04 build2
  Impact: HW: ISP2532
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build87:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Uncorrectable FEC error count support in USCM stats 
  Introduced: v6.04 build87
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build86:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added I/O Throttling support
  Introduced: v6.04 build86
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build85:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added PortID support for NVMe targets
  Introduced: v6.04 build85
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build84:
  -------------
  Defect/Enhancement: Defect
  Problem: Boot code valid bit is set for all boot codes
  Solution: Set boot code valid bit only when valid boot code is found
  Introduced: v6.04 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build83:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Virtual Lane support
  Introduced: v6.04 build83
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build82:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added new NVRAM parameters
  Introduced: v6.04 build82
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-1
  ----------------------------------

  v7.00 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Use OS provided libsysfs library
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-2
  ----------------------------------

  v7.00 build3:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps issue seen with static library
  Solution: Fixed static library issue
  Introduced: v7.00 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build2:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps runtime failure on RHEL 9 due to libsysfs function
  Solution: Removed dependency of libsysfs function
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-3
  ----------------------------------

  v7.00 build6:
  -------------
  Defect/Enhancement: Defect
  Problem: checksec.sh reported security property issues
  Solution: Fixed checksec.sh reported security property issues
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added driver maintenamce mode support for FW load error
  Introduced: v7.00 build5
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build4:
  -------------
  Defect/Enhancement: Defect
  Problem: Debug symbols present in library binary
  Solution: Removed debug symbols from library binary
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Kumar Rahul<Linux_SWdeliverables@external.groups.hp.com> 3.2-5
changelog:
  - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards


author: Shreya Roy Chowdhury<Linux_SWdeliverables@external.groups.hp.com> 3.2-6
changelog:
  - Corrected Link state display information for Qlogic Adapters
  - Added MSA G3 support in Scsi_info.h


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2021.11.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.03.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      12.8.528.21
      
      12.8.528.21
      
      12.8.528.10
      
      12.8.502.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.08.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.20
      
      14.0.499.20
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.20
      
      14.0.499.20
      
      14.0.499.2
      
      14.0.490.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.08.01-2.1
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.21
      
      14.0.499.21
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.20
      
      14.0.499.20
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.20
      
      14.0.499.20
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.20
      
      14.0.499.20
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.20
      
      14.0.499.20
      
      14.0.499.2
      
      14.0.490.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.10.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.25
      
      14.0.499.25
      
      14.0.499.2
      
      14.0.490.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.03.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.0.499.29
      
      14.0.499.29
      
      14.0.499.2
      
      14.0.490.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.08.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.2.589.5
      
      14.2.589.5
      
      14.2.579.0
      
      14.2.566.0
      
      Added support for:
      
      RedHat Enterprise Linux 8.8
      
      RedHat Enterprise Linux 9.2
      
      SuSE Linux Enterprise Server 15 SP5


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.10.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **Universal Boot Image**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.2.589.21
      
      14.2.589.21
      
      14.2.589.16
      
      14.2.566.0
      
      HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
      
      16Gb
      
      14.2.589.21
      
      14.2.589.21
      
      14.2.589.16
      
      14.2.566.0
      
      HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.21
      
      14.2.589.21
      
      14.2.589.16
      
      14.2.566.0
      
      HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.21
      
      14.2.589.21
      
      14.2.589.16
      
      14.2.566.0
      
      HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.19
      
      14.2.589.19
      
      14.2.589.16
      
      14.2.566.0
      
      HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      14.2.589.19
      
      14.2.589.19
      
      14.2.589.16
      
      14.2.566.0
      
      HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.2.589.19
      
      14.2.589.19
      
      14.2.589.16
      
      14.2.566.0
      
      HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      14.2.589.19
      
      14.2.589.19
      
      14.2.589.16
      
      14.2.566.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.09.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      1.77.12
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      1.77.12
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      1.77.12
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      1.77.12
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.06.27
      
      09.09.00
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.06.27
      
      09.09.00
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.10.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.01
      
      09.09.00
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.01
      
      09.09.00
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.03.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.02
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.00.01
      
      9.09.00
      
      7.19
      
      3.64
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.02
changelog:
  -     The Firmware fixes the following:
      
        * Unsuccessful read of the SFP Temperature which will trigger a Server Shutdown. 
        * Message related to a Mailbox 0x48 Firmware dump saved to buffer.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.09.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.01.03
      
      9.12.02
      
      7.24
      
      3.64
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.01.03
      
      9.12.02
      
      7.24
      
      3.64
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.01.03
      
      9.12.02
      
      7.24
      
      3.64
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.01.03
      
      9.12.02
      
      7.24
      
      3.64
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      Non-disruptive firmware upgrades: non-disruptive firmware updates is enabled
      and will not require a server reboot to apply.
      
      Added support for:
      
      RedHat Enterprise Linux 8.8
      
      RedHat Enterprise Linux 9.2
      
      SuSE Linux Enterprise Server 15 SP5


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.09.01
changelog:
  -     Fixed the following behavior:
      
      Temperature Misreading: the adapter was reading incorrect reading of the
      temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small
      Form-factor Pluggable. The symptom would result in a temperature spike and
      potentially reset the system


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.10.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      Adapter
      
      Speed
      
      MBI
      
      Firmware
      
      UEFI
      
      Boot Bios
      
      HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.02.05
      
      9.14.00
      
      7.25
      
      3.68
      
      HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter
      
      16Gb
      
      02.02.05
      
      9.14.00
      
      7.25
      
      3.68
      
      HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.02.05
      
      9.14.00
      
      7.25
      
      3.68
      
      HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.02.05
      
      9.14.00
      
      7.25
      
      3.68
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed n issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.32.1010**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The link status was reported incorrectly and consequently caused the link to go down due to incorrect definition of the RX_LOS polarity in the INI.
        * The system got into an unresponsive state when a peer port went down while using an Optical module.
        * Invalid RNR timeout when trying to set it during the rts2rts_qp transition.
        * A fatal assert 0x81C5 occurred when calling get_vport_mad from the MAD APIs. The firmware was trying to compute the number of vPorts using a global function number. To avoid this issue, the API was updated to remove any assumption on the function number. Note: This issue is affects only IB devices.
        * During events, stress caused the firmware to reset the Arm host of the vPort without sending an event. Thus preventing the software from rearming the vPort as it did not receive any event, and the firmware did not send the event because the vPort had no Arm set.
        * The system could not create more than 128K QPs.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
        * PCIe lane margining capability issues.
        * An issue related to the sl2vl mad that caused a few msec hiccup in the transmission on an InfiniBand network when the SM sent the sl2vl mad to a node in the cluster.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.33.1048:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      
      
      **New Features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      
      
      **New features and changes included in version 16.33.1048:**
      
        * Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software.  
      Note: If the Keep Link Up NV configuration is changed, phyless reset will be
      blocked.
      
        * Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
        * Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
        * Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
        * Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation.
        * Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
        * Disabled the option to send SMPs from unauthorized hosts.
        * Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
        * Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
        * Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter.
        * Enabled delay drop for hairpin packets. If a hairpin QP is created with delay_drop_en enabled, the feature will be enabled across all GVMIs, based on the delay drop status.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.33.1048**
      
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * The card occasionally masked some PCIe AER reporting.
        * Incorrect flow of credits blockage that prevented booting during DC cycle test.
        * An issue with BMC medium migration from SMBUS to PCIe, and increased FIFOs to pass large packets in case of the migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.1012:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      
      
      **New Features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      
      
      **New features and changes included in version 16.35.1012:**
      
        * Added support for copy modify header steering action to/from the UDP field.
        * Enabled ADP timer to allow the user to configure RC or DC qp_timeout values lower than 16.
        * QoS priority trust default state can now be changed using the new nvconfig below: 
          * QOS_TRUST_STATE_P1
          * QOS_TRUST_STATE_P2
      
      The values that can be used to set the default state are:
      
        * TRUST_PORT
        * TRUST_PCP
        * TRUST_DSCP
        * TRUST_DSCP_PCP


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.14
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.1012:**
      
        * RDE (Redfish) PATCH operation to LLDPTransmit properties "ManagementAddressIPv4", "ManagementAddressIPv6" and "ManagementAddressMAC" were applied only in the first attempt, but failed in the next.
        * PLDM AEN event receiver media was changed unexpectedly and destination BDF was overridden with garbage when some PLDM packet were received from the SMBus layer.
        * Bad configuration of number of VFs and SFs led to the consumption of too many functions and triggered a FW assert 0x888E. The reduction flows behavior was fixed to ensure the configuration does not exceed the total number of supported functions. 
        * InfiniBand L2 QP could not receive RDMA traffic occasionally.
        * Running with a debug firmware reduced security as if token was applied.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      Important : Security Hardening Enhancements - This release contains important
      reliability improvements and security hardening enhancements. HPE recommends
      upgrading your device firmware to this version to improve the firmware
      security and reliability of your device.
      
      **New Features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15
changelog:
  -     *The following issues have been fixed in version 12.28.2006:**
      
        * Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15-2.1
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
        * 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
        * 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)
      
      Important : Security Hardening Enhancements - This release contains important
      reliability improvements and security hardening enhancements. HPE recommends
      upgrading your device firmware to this version to improve the firmware
      security and reliability of your device.
      
      **New Features and changes included in version 1.0.15(A):**
      
        * Version 1.0.15(A) has been recompiled to create the firmware RPM compatible with RPM LIB v4.14.2. As a result, this rebuild firmware version 1.0.15(A) can now be installed successfully on a node with FIPS enabled.
      
      **New Features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.15-3.1
changelog:
  -     *The following issues have been fixed in component version 1.0.15(B):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **The following issues have been fixed in version 12.28.2006:**
      
        * Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.8
changelog:
  -     *The following issues have been fixed in version 20.32.1010:**
      
        * System could not create more than 128K QPs.
        * Incorrect indication of the PCIe link down in the AER registers on PCIe switch upstream port.
        * Invalid RNR timeout when trying to set it during the rts2rts_qp transition.
        * The flash frequency on boot was lower than expected (under 50Mhz). The issue was fixed by enabling the firmware to increase it on boot2 to normal frequency.
        * A race condition between DC QP flush and DC packets that led to stuck slices in the hardware. To avoid such situation, firmware keeps the TCU drop set until QP flush is done.
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The link status was reported incorrectly and consequently caused the link to go down due to incorrect definition of the RX_LOS polarity in the INI.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *Firmware for the following devices has been updated to 20.33.1048:**
      
        * HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21
      
      **New features and changes included in version 20.33.1048:**
      
        * Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software.  
      Note: If the Keep Link Up NV configuration is changed, phyless reset will be
      blocked.
      
        * Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
        * Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
        * Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
        * Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
        * Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation. 
        * Disabled the option to send SMPs from unauthorized hosts.
        * Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
        * Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
        * Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter. 
        * Crypto features can be in either wrapped or unwrapped mode. Meaning, the key can be wrapped or in plaintext when running the CREATE_DEK PRM command. To comply with the requirements specified in FIPS publication, all the created DEKs must be wrapped.  
      This feature adds new NV_CONFIG per device to control this mode, and enables
      the user to change all the crypto features to wrapped or cleartext.
      
        * Enabled delay drop for hairpin packets. If a hairpin QP is created with delay_drop_en enabled, the feature will be enabled across all GVMIs, based on the delay drop status.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *The following issues have been fixed in version 20.33.1048:**
      
        * An issue where RDMA write may experience performance degradation when working with Adaptive Routing and DCT half-handshake mode.
        * An issue that ignored the default value of TX_SCHEDULER_BURST when its value in the ini was different than "0".
        * Implemented SLD detection code. Surprise Down Error Reporting Capable value was changed from 1 to 0 in boards where the downstream perst was not controlled thus causing SLD detection not to function properly.
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * RDMA_WRITE traffic performance degradation that occured when working with DC on Adaptive Routing network.
        * Bad cache invalidations of destroyed QPs.
        * A rare case where asserts and ext_synd appeared in dmesg after performing driver restart. 
        * An issue related to host isolation on multi-host systems.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10
changelog:
  -     *Firmware for the following devices has been updated to 20.35.1012:**
      
        * HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21
      
      **New features and changes included in version 20.35.1012:**
      
        * Added support for copy modify header steering action to/from the UDP field.
        * Enabled ADP timer to allow the user to configure RC or DC qp_timeout values lower than 16.
        * QoS priority trust default state can now be changed using the new nvconfig below: 
          * QOS_TRUST_STATE_P1
          * QOS_TRUST_STATE_P2
      
      The values that can be used to set the default state are:
      
        * TRUST_PORT
        * TRUST_PCP
        * TRUST_DSCP
        * TRUST_DSCP_PCP
        * Added support for using SetEventReceiver PLDM command with mode polling.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10
changelog:
  -     *The following issues have been fixed in version 20.35.1012:**
      
        * RDE (Redfish) PATCH operation to LLDPTransmit properties "ManagementAddressIPv4", "ManagementAddressIPv6" and "ManagementAddressMAC" were applied only in the first attempt, but failed in the next.
        * The RXT E2E inflight went into an unresponsive state occasionally.
        * RDMA partition was reported even if NIC+RDMA mode was disabled.
        * PLDM AEN event receiver media was changed unexpectedly and destination BDF was overridden with garbage when some PLDM packet were received from the SMBus layer.
        * An incorrect address issue for XRQ Event Backend Controller Px Syndrome event in multi-host system during FLR.
        * PCIe SKP OS generation interval issue for Gen1 and Gen2.
        * InfiniBand L2 QP could not receive RDMA traffic occasionally.
        * Running with a debug firmware reduced security as if token was applied.
        * PLDM AEN event receiver was required to be cleared on PCIe reset in case the media type was MCTP over PCIe VDM.
        * Asynchronous messages were sent over MTCP before endpoint discovery was done.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.11
changelog:
  -     *Firmware for the following devices has been updated to 20.37.1700:**
      
        * HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21
      
      Security Hardening Enhancements: This release contains important reliability
      improvements and security hardening enhancements. HPE recommends upgrading
      your device's firmware to this release to improve the firmware security and
      reliability of your device.
      
      
      
      **New features and changes included in version 20.37.1700:**
      
        * A new capability enables the VM to track and limit its Vport's activity. This is done using the new q_counters counter which enables aggregation of other Vport's from PF GVMI.
        * Updated the link maintenance flow to avoid high uncorrectable error rate.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *Firmware for the following devices has been updated to 20.40.1000:**
      
        * HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
        * HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21
      
      Security Hardening Enhancements: This release contains important reliability
      improvements and security hardening enhancements. HPE recommends upgrading
      your device's firmware to this release to improve the firmware security and
      reliability of your device.
      
      
      
      **No New features or changes have been included in version 20.40.1000.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *The following issues have been fixed in version 20.40.1000:**
      
        * RDE LLDPTransmit ChassisID was occassionally not represented correctly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13-2.1
changelog:
  -     *The following issues have been fixed in component version 1.0.13(A):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **The following issues have been fixed in version 20.40.1000:**
      
        * RDE LLDPTransmit ChassisID was occassionally not represented correctly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10
changelog:
  -     *Fixes in version 2.42.5000:**
      
        * PortRcvPkts counter was prevented from being cleared after resetting it.
        * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec.
        * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error.
        * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot.
        * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck.
        * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed.
        * ibdump could not capture all MADs packets.
        * link did not go up after reboot.
        * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions.
        * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad.
      
      **Fixes in version 2.42.5056:**
      
        * Fixed an issue that resulted in reading from invalid I/O address on handover from UEFI boot to OS boot, when a port was configured as InfiniBand on a VPI adapter device.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.11
changelog:
  -     *Firmware for the following devices are updated to 2.42.5000:**  
          764282-B21  
          764286-B21  
      
      **Firmware for the following devices are updated to 2.42.5056:**  
          764283-B21  
          764284-B21
      
      **Firmware for the following device is updated to 2.42.5700:**  
          764285-B21
      
      **New features in firmware version 2.42.5000:**
      
        * Added support for the following features. 
          * new TLV: CX3_GLOBAL_CONF to enable/disable timestamp on incoming packets through mlxconfig configuration.
          * User MAC configuration.
          * Automatically collecting mstdump before driver reset.
          * A mechanism to detect DEAD_IRISC (plastic) from TPT (iron) and raise an assert.
          * A new field is added to "set port" command which notifies the firmware what is the user_mtu size.
        * Improved the debug ability for command timeout cases.
      
      **New features and changes in firmware version 2.42.5700.**
      
        * Modified the mlx_cmd_get_mlx_link_status command return value to return "Link Type = Ethernet" in Ethernet adapter cards.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12-2.1
changelog:
  -     *The following changes have been made in sub-version 1.0.12(A):**
      
        * Product rebuilt to have the new SHA 384 signature.
      
      **Fixes in version 2.42.5000:**
      
        * PortRcvPkts counter was prevented from being cleared after resetting it.
        * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec.
        * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error.
        * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot.
        * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck.
        * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed.
        * ibdump could not capture all MADs packets.
        * link did not go up after reboot.
        * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions.
        * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad.
      
      **Fixes in version 2.42.5056:**
      
        * Fixed an issue that resulted in reading from invalid I/O address on handover from UEFI boot to OS boot, when a port was configured as InfiniBand on a VPI adapter device.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12-3.1
changelog:
  -     *Firmware for the following devices are updated to 2.42.5000:**  
          764282-B21  
          764286-B21  
      
      **Firmware for the following devices are updated to 2.42.5056:**  
          764283-B21  
          764284-B21
      
      **Firmware for the following device is updated to 2.42.5700:**  
          764285-B21
      
      **New Features and changes included in version 1.0.12(B):**
      
        * Version 1.0.12(B) has been recompiled to create the firmware RPM compatible with RPM LIB v4.14.2. As a result, this rebuild firmware version 1.0.12(B) can now be installed successfully on a node with FIPS enabled.
      
      
      
      **New features in firmware version 2.42.5000:**
      
        * Added support for the following features. 
          * new TLV: CX3_GLOBAL_CONF to enable/disable timestamp on incoming packets through mlxconfig configuration.
          * User MAC configuration.
          * Automatically collecting mstdump before driver reset.
          * A mechanism to detect DEAD_IRISC (plastic) from TPT (iron) and raise an assert.
          * A new field is added to "set port" command which notifies the firmware what is the user_mtu size.
        * Improved the debug ability for command timeout cases.
      
      **New features and changes in firmware version 2.42.5700.**
      
        * Modified the mlx_cmd_get_mlx_link_status command return value to return "Link Type = Ethernet" in Ethernet adapter cards.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12-4.1
changelog:
  -     *The following changes have been made in sub-version 1.0.12(C):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **Fixes in version 2.42.5000:**
      
        * PortRcvPkts counter was prevented from being cleared after resetting it.
        * The system Timed Out on the configuration cycle of the Virtual Functions (VFs) when more than 10 Virtual Functions performed FLR and the completion Time Out value was configured to a range of less than 16 msec.
        * The server hangs and results in NMI when running "mlxfwtop -d mt4103_pci_cr0" while restarting the driver in parallel (from a different thread). In this case, the downstream bridge over the device reported completion timeout error.
        * In flow_steering, BMC could not receive a ping over IPV6 after running bmc_reboot.
        * While closing the HCA, the RX packet caused bad access to resources that did not exist, and consequently caused the QPCGW or the irisc to get stuck.
        * The master SMLID and the LID was either 0 or 0xFFFF when the port was neither active nor armed.
        * ibdump could not capture all MADs packets.
        * link did not go up after reboot.
        * Fixed a rare issue that cause the PCIe configuration cycle that arrived during the time of sw_reset to generate 2 completions.
        * Network Controller Sideband Interface (NC-SI) did not work when adding the disable_static_steering_ini field in the ini file, due to memory allocation issue for this field in the scratchpad.
      
      **Fixes in version 2.42.5056:**
      
        * Fixed an issue that resulted in reading from invalid I/O address on handover from UEFI boot to OS boot, when a port was configured as InfiniBand on a VPI adapter device.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Adds support for a second source drive pre-amp, and improves reliability with an updated direct offline scan algorithm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5-2.1
changelog:
  -      Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5-2.1
changelog:
  -      Fixed an incompatibility issue in MCTP over PCIe VDM function
        * Updated WCTEMP value for thermal throttling threshold


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5-4.1
changelog:
  -      Fixed an incompatibility issue in MCTP over PCIe VDM function
        * Updated WCTEMP value for thermal throttling threshold
        * Fixed CA <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00130699en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5-5.1
changelog:
  -      Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5-5.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-5.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-7.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> GPK4
changelog:
  -      Fixes Get Endpoint ID (EID) command failure by issuing Set Endpoint ID after Endpoint Discovery


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> GPK5
changelog:
  -      Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-5.1
changelog:
  -      The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs.
        * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously.
        * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK6-2.1
changelog:
  -      Main fixes are for Secure boot(Option ROM) ILO error and critical fix for issue where failure to send MI command completion could result in drive reporting 0GB until power cycled.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00123725en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. 
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-4.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. 
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.
        * Assert fixes, logging enhancements and all current firmware improvements.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5
changelog:
  -      Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-4.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD9
changelog:
  -      Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-8.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-10.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Corrective actions to fix potential background media scan issue.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      FW update to eliminate the risk of data error at unexpected power-off during specific I/O combination.
        * Adjust SoC clock in fw to bridge the LBA info. transfer timing gap and remove the risk of buffer CRC error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7-4.1
changelog:
  -      The issue affects SSDs with an HPE firmware version prior to HPD7 that results in SSD failure at 40,000 hours of operation (i.e., 4 years, 205 days 16 hours), neither the SSD nor the data can be recovered, after the SSD failure occurs.
        * In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously.
        * For more information, refer to HPE Customer Advisory at the following URL:<https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097382en_us>.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -      HPG4 implements a change in Background Media Scan triggering threshold based on a unique retention characteristic to help address a Predictive Failure.
        * For the drives reporting the predictive failure, please update to HPG4 and please power cycle the server or re-seat the drives to clear the predictive failure record  after one full Media Scan (10 days). Media Scan in HPG4 will scrub error during these 10 days.
        * For the drives that do not report the PF, you can update to HPG4 directly without power cycle the server or drives.
        * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00124896en_us


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-3.1
changelog:
  -      Fixed an issue to Allow Drives to update Firmware even though the Drive is in Predictive Failure Condition


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-2.1
changelog:
  -      This firmware release provides additional protection against command timeouts.
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00117258en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK3-7.1
changelog:
  -      This FW change resolves a MCTP VDM compliance issue seen by iLO version 2.30.
        * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111061en_us


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD6-8.1
changelog:
  -      Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
        * The firmware also includes emergency power off improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> EPK76H3Q
changelog:
  -     Please refer to SID8624 wtih the reason that why upgrade requiremnet need to
      be set to Critical


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> EPK76H3Q
changelog:
  -      Contains critical fix for issue where failure to send MI command completion could result in drive reporting 0GB until power cycled.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00123725en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4IASHPK3-3.1
changelog:
  -      Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4
changelog:
  -      Reverted OCP spec features to maintain compliance to OCP spec commands over NVMe-MI
        * Implemented real Active Measured Latency by adding OCP 2.0 C3 Log page


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6-9.1
changelog:
  -      Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
        * The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
        * Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 85032G00-2.1
changelog:
  -      Implements FW-based VPD.
        * ARP setting is changed from "Capable & Discoverable" to "Fixed & Discoverable".
        * A minor tweak to the Foreground Media Scan (FMS) algorithm to ensure critical variables are initialized properly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Improves performance in certain file systems and implements fixes for several of the previous firmware's shortcomings.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA
changelog:
  -      This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -      If Power On Hours exceeds 70,000hrs, PM2R will report Hardware error (04/4C/A8) after the next Power Cycle and will not accept read/write commands. This fix will update storage location reporting when the maximum number of registrations in the Work Load Log read process reaches 70,000; the last registered 70,000th storage location will be modified to be read as the next (70,001st) storage location.
        * For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00111296en_us


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine "sweeping" of the media surface.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK2
changelog:
  -      Applied enhanced NAND recovery algorithm to prevent read UECC error
        * Prepare proper response data for Get Message Type Supported MCTP Command


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD6-4.1
changelog:
  -      Reduced the occurrence probability of PMIC busy issue. 
        * Fixed the system data error at the drive power on issue. 
        * When the PLP operation starts, the waiting Unmap request to the 4KB not-aligned host write area is canceled to be able to complete PLP correctly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7
changelog:
  -      Reduced the occurrence probability of PMIC busy issue by stopping PLP capacity check to reduce i2c access to PMIC.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4ICRHPK3-4.1
changelog:
  -      The issue affects SSDs with an HPE firmware version prior to 4ICRHPK3 that may result in SSD failure starting at 4,700 hours of operation, neither the SSD nor the data can be recovered, after the SSD failure occurs.
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00111900en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc...


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4
changelog:
  -      Fix bugs found in the previous version and improve on TTR (Time To Ready) requirement to fix device temporarily not found issue after hot-plug.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5
changelog:
  -      Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5
changelog:
  -      Prioritize disabling Non-Fatal Error reporting at the beginning of FLR processing.
        * Fix known FW bug PI/CI indexing issue.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. 
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-4.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. 
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-2.1
changelog:
  -      Fixes an issue in previou version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5-6.1
changelog:
  -      Fixes a rare link loss issue and adds enhancements for drive reliability.
        * After HPG5 firmware is downloaded to the drive, the new HPG5 firmware will be active on the drive.
        * The new drive bootloader code will be activated after the next drive power cycle.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00072768en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Removed printed circuit board assembly serial number from product serial number field on VPD 80h


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configuratioans.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG8
changelog:
  -      Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7-2.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * High Security Enablement support FIPs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode  is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5-7.1
changelog:
  -      This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Addresses a hot plug reporting concern
        * Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs and provide a minor performance improvement


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -      Improves data integrity. 
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> MPK75H5Q-4.1
changelog:
  -      Fixed False UECC issue at idle power mode (12.8TB and 15.36TB only).
        * Apply PCLK running PHY option, PLL clock disable can be avoided in lane 0 missing case.
        * Old FW download Blocking.
        * FW is changed off the option of TX data alignment for each lane.
        * FW is changed to clear the interrupt after TLP Complete when PCIe config read operation.
        * For more information, refer to HPE Customer Bulletin at the following URL: <https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00113342en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7-8.1
changelog:
  -      Fixes a data integrity risk where stale data is mistakenly used from cache.
        * Fixes a data integrity risk where stale data is returned on an unaligned overlapped write-read operation.
        * Fixes a data integrity risk during a sequential read and write workload when a recovered error is encountered, which could cause incomplete data to be read.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.02
changelog:
  -      Support for BlueField-3 DPU Model B3220 has been added
        * Storage Page enhanced to display storage enclosure, switch and port information in the topology


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.02
changelog:
  -      Fix for incorrect temperature sensor values and sensor indices reported by iLO SNMP interface
        * Fix for inconsistent physical drive status reported by iLO SNMP interface as compared with iLO GUI or Redfish interfaces
        * Support added for sending iLO AlertMail with TLS enabled, in conformance with RFC3207
        * Fix for configuring one time boot options via in-band and out-of-band IPMI methods
        * Fix for Web User interface being rendered inaccessible after the storage tab is clicked, in a server with large number of drives


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.04
changelog:
  -     1\. Support for TLS v1.3  
      2\. Support for consistent URIs (indexes) under Ethernet interfaces for
      systems in Gen 10 servers at all times.  
      3\. Ability to switch from DHCP6 to static IPv6 address for the same IP
      address.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.04
changelog:
  -     1\. Fixed an issue where there was a communication loss between HPE Ethernet
      1Gb 4-port 331FLR adapter and HPE iLO 5.  
      2\. Fixed an issue of invalid values for SNMP OIDs during SNMPWALK.  
      3\. Fixed an issue where SMBIOS data file present in NAND is removed and
      recreated every time a server reboots.  
      4\. Fixed an issue where the IPMI power supply status showed a failure
      detected in empty bays on Apollo servers.  
      5\. Fixed an issue where while entering an incorrect HPE iLO password on a
      server in Edgeline EL8000t chassis displayed an improper error message.  
      6\. Fixed an issue where physical drive status was reported incorrectly in
      SNMP.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.05
changelog:
  -     1. Support for Titanium PSU upgrade for 2200W PSUs.
        2. Support for Fan speed in terms of percentage from SNMP OID Get and Walk.
        3. Added cypher #17 support for HPE iLO IPMI over LAN interface.
        4. Support for minimum 15 concurrent sessions per user for each interface.
        5. Support for HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter (P45642-B22/ P45642-H22).
        6. Fixes for specific SNMP OIDs for RDE capable storage controllers for controller, physical drive, and logical drive properties.
        7. Added the following to HPE Edgeline e910t and e920t servers:
      
              o  Added additional AHS Diagnostics Logging for collecting NON-Innovation Engine thermal sensors.
      
              o  Added IML alert and Redfish Alert to report Intel Processor PROCHOT status.
      
                  -  Warning alert / event when active PROCHOT longer than 60 seconds.
      
                  -  Repair alert / event when non-active PROCHOT status.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.05
changelog:
  -     1. Fixed an issue with the sensor index suffix in SNMP sensor name OIDs.
        2. Fixed an issue where, while updating the One Time Boot option to PXE boot device, the UEFI optimized boot mode was getting set to a disabled state.
        3. Fixed an issue with dynamic sensor number enumeration in IPMI response.
        4. Fixed an issue where LDAP mode used to get disabled due to version and size mismatch.
        5. Fixed an issue where HTTP calls to Rest server (through a web server) to create installset, initiate installset, and read installset was unstable leading to failure in BundleUpdate.
        6. Fixed an issue where data from Redfish when appended with available data, use to generate unexpected data.
        7. Fixed an issue on HPE ProLiant Gen10 and HPE ProLiant Gen10 plus systems query to memory URI response that got delayed or timed out.
        8. For HPE Edgeline e910t and e920t servers:
      
       Fixed an issue where there was a missing or outdated CPU, DIMM, and Chipset
      thermal temperature sensors.
      
       Fixed an issue where there was a wrong reporting of Stale DIMM sensor IML
      Alert or a Redfish Event.
      
       Fixed an issue where HPE iLO fails to perform a firmware update for HPE
      Innovation Engine (IE) and HPE Server Platform Services (ME) Firmware.
      
       9. Fixed an issue for Embedded ALOM and for other cards where the indexes were automatically assigned.
      
      10. Fixed an issue where there was a communication loss between HPE Ethernet 1Gb 4-port 331FLR adapter and HPE iLO 5.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.06
changelog:
  -      Fixed the offline firmware update failure through SPP and missing the
      inventory of hard drives.
      
       Fixed iLO upgrade issue due to file upload failure.
      
       Fixed the Uncorrectable Machine Check Exception (UMCE) and server start when
      iLO reset is triggered.
      
       Fixed an issue with the iLO Firmware auto recovery process.
      
       Fixed an issue where Apollo and Edgeline servers could display an impossibly
      high chassis power reading, which was determined to be invalid.
      
       Fixed an issue where there was a communication loss between HPE Ethernet 1Gb
      4-port 331FLR adapter and HPE iLO 5.
      
       Fixed an issue with the sensor index suffix in SNMP sensor name OIDs.
      
       Fixed an issue where, while updating the One Time Boot option to PXE boot
      device, the UEFI optimized boot mode was getting set to a disabled state.
      
       Fixed an issue with dynamic sensor number enumeration in IPMI response.
      
       Fixed an issue where LDAP mode used to get disabled due to version and size
      mismatch.
      
       Fixed an issue where HTTP calls to Rest server (through a web server) to
      create installset, initiate installset, and read installset was unstable
      leading to failure in BundleUpdate .
      
       Fixed an issue where data from Redfish when appended with available data,
      used to generate unexpected data.
      
       Fixed an issue on HPE ProLiant Gen10 and HPE ProLiant Gen10 plus systems
      query to memory URI response that got delayed or timed out.
      
       For HPE Edgeline e910t and e920t servers:
      
       Fixed an issue where there was a missing or outdated CPU, DIMM, and Chipset
      thermal temperature sensors.
      
       Fixed an issue where there was a wrong reporting of Stale DIMM sensor IML
      Alert or a Redfish Event.
      
       Fixed an issue where HPE iLO fails to perform a firmware update for HPE
      Innovation Engine (IE) and HPE Server Platform Services (ME) Firmware.
      
       Fixed an issue for Embedded ALOM and for other cards where the indexes were
      automatically assigned.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.31.0
changelog:
  -     This product addresses an issue related to the adjustment of code structure on
      corresponding HW material change.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.32.3
changelog:
  -     This product correct an issue about the display of BootCode version not
      reflecting current running version after upgrading the adapter firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.33.4
changelog:
  -     This product fixes the intermittent issue of displaying incorrect device
      status under iLO web


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.1
changelog:
  -      This product addressed the disconnection with iLO after switching to Shared Network mode.
        * This product addressed the compatibility of shared memory communication on adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -      This product now supports Red Hat Enterprise Linux 9.2.
        * The product addressed some Broadcom code structure utilization.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -     This product addressed that platform might encounter a POST failure when
      NX1-based controllers and some storage controllers combines.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.37.0
changelog:
  -      This product fixed error checking sequence for Firmware Management Protocol API.
        * This product fixed NC-SI commands to interoperate more benefit with iLO.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.13.50
changelog:
  -     This product addresses an issue about battery POST error caused by unnecessary
      protocol on Supported Devices of this product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.14.0
changelog:
  -      This product addresses an issue incorrect reporting on link status of HPE 631FLR-SFP28 Adapter.
        * This product addresses an issue battery POST error caused by unnecessary protocol on Supported Devices of this product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15.2
changelog:
  -      This product enhances bnxtnvm support OTP programming.
        * This product enhances coredump support to dump  cache contents.
        * This product enhances Firmware command line module modularity
        * This product enhances to add support for disabling Overflow detection for CQs (Completion Queues) of RoCE (RDMA over converged Ethernet )
        * This product enhances FW support for QUIC key (Quick UDP Internet Connection) context backing store management
        * This product enhances to add support for PCIe TPH (TLP Processing Hints)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15.2
changelog:
  -      This product correct an issue which not allow the user to configure the multi-function mode option with option value string.
        * This product correct an issue which the performance issue is seen with GRO offload (Generic Receive Offload) enable.
        * This product correct an issue which the Firmware upgrade fails if bnxtnvm uses the default value.  increased the timeout value to sufficient vaule.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.16.2
changelog:
  -      This product enhances the RDE BEJ encoding for some MessageArgs.
        * This product removes CCM(Comprehensive Configuration Management) for the legacy driver.
        * This product removes Energy-Efficient Ethernet (EEE) from the PHY.
        * This product adds range validation checks to dest_port and dest_port_mask for ntuple commands.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.16.2
changelog:
  -      This product fixes the issue of incorrect PCIe VF numbers caused by some NCSI queries.
        * This product fixes the RDE error response for certain properties with unsupported input
        * This product fixes the problem of no RDE alert being generated when the link status changes.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.17.2
changelog:
  -      This product addressed the NC-SI passthrough algorithm for some FRU-reading commands from platform side.
        * This product addressed the packet forwarding rule while receiving packet which is bigger than 9600 jumbo size.
        * This product addressed the link failure under FreeBSD OS after changing link speed.
        * This product addressed the failure of bringing up VFs of SRIOV when doing on and off switch.
        * This product addressed adapter not responsive when work under heavy loading with 128 VMs.
        * The product addressed status reporting  of PLDM sensor monitoring with BMC.
        * This product addressed the link-flap after link down or warm boot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.18.2
changelog:
  -      This product addressed PFC flood problem when shut down system while running RoCE traffic.
        * This product addressed PCIeVDM communication problem between BMC and NIC after an error recovery.
        * This product addressed the PHY level packet drop.
        * This product addressed the problem of multi-cast traffic gets leaked to unintended functions.
        * This product addressed the reporting mechanism of NCSI max temperature.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.19.0
changelog:
  -      This product fixed the problem of port Reset command not forcing 10G module to shut down link properly.
        * This product fixed the problem of PFC flood if shutdown the system while running RoCE traffic.
        * This product fixed NC-SI Get NC Capabilities and Settings response MaxPFs value.
        * This product fixed the restriction of PF/VF bar sizes to valid values.
        * This product fixed random Whp-livepatch failure due to out-of-order function.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20.0
changelog:
  -      This product fixed connection failed with Windows GRE VPN client under VM configured.
        * This product fixed PLDM Monitoring and Control to interoperate more robust with iLO for events sequence and parameter enablement.
        * This product fixed NC-SI commands scope and event to interoperate more benefit with iLO.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.32.3
changelog:
  -     This product correct an issue which the Boot Code Version of the Firmware did
      not get updated after upgrading the Firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.33.3
changelog:
  -      This product removes CCM(Comprehensive Configuration Management) for the legacy driver.
        * This product adds to support HPE MicroServer Gen11


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.33.3
changelog:
  -      This product fixes the intermittent issue of displaying incorrect device status under iLO web
        * This product fixes the intermittent lost iLO connection with shared networking mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.1
changelog:
  -      This product addressed a problem where Reboot Required option was not set after doing firmware update under RBSU.
        * This product addressed the disconnection with iLO after switching to Shared Network mode on BCM5719 OCP3 adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.50
changelog:
  -     This product addresses an issue where the FAN behavior with installed BCM 5719
      1Gb 4p BASE-T OCP Adptr.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.70
changelog:
  -     This product addresses an issue where network loses IP Address Randomly during
      AC/DC cycle and idling.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -      This product addressed abnormal fan behavior when BCM5719 OCP3 installed.
        * This product addressed the failure of IP dispatch when using BCM5719 LOM as shared iLO networking.
        * This product addressed that platform might encounter a POST failure when NX1-based controllers and some storage controllers combines.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.27.0
changelog:
  -      This product addresses an issue where Option ROM version is missing with some Intel 1GB adapters
        * This product addresses an issue where disconnection occurs after rebooting system with HPE Ethernet 1Gb 2-port 368i Adapter and HPE Ethernet 1Gb 4-port 369i Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.27.30
changelog:
  -     This product addresses an issue where NIC status(iLO page->System
      Information->Network) for HPE Ethernet 10Gb 2-port 562SFP+/562FLR-SFP+ Adapter
      is Unknown with being plugged in to a network.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.28.0
changelog:
  -     This product addresses an issue where the firmware installation exceeds the
      expected time by using Oneview to update Firmware with 568FLR-MMSFP+.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.50
changelog:
  -      This product addresses an issue where the incorrect translation is seen with Intel Intel I350-T4 Ethernet 1Gb 4-port BASE-T  Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.4
changelog:
  -     This product addresses an issue where the adaters isn't recongized with HPE
      Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2  Adapter and HPE Ethernet 10Gb 2-port
      SFP+ X710-DA2 Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30.0
changelog:
  -      This product now supports Red Hat Enterprise Linux 9 Update 3.
        * For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/download/19622/


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.4
changelog:
  -     *Following issues have been fixed in version 14.29.1016:**
      
        * An issue that caused the sent packet to hang while the device entered FLR mode.
        * Enabled Bar configuration bytewise by applying the write_en bitmask.
        * A rare case where the the device froze while running the sw reset flow under heavy stress and with many open resources.
        * Low PXE performance while using the VSC to trigger the send_ring_doorbells.
        * An error that prevented the completions (CQ) from being completed due to a race condition in the firmware transport error handlers, and the error stressors, where the error stressors would hang the firmware transport error handler flow.
        * An issue that caused the fragmented IP packets to drop was fixed.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.5
changelog:
  -     *Firmware for the following device is updated to 14.31.1014:**
      
        * P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)
      
      **New features and changes included in version 14.31.1014:**
      
        * Implemented a new NC-SI command get_debug_info to get mstdump via the NC-SI protocol to debug a device if the PCI link fails for any given reason.
        * support for Enabling/Disabling NIC and RDMA (port/partition) was included via the UEFI HII system settings.
        * Increased the maximum number of MSIX per VF to 127.
        * Added a new bit ("data_in_order") to query the QP and allow a process/library to detect when the AR is enabled.
        * A new flex parser to support GENEVE hardware offload and ICMP.
        * When the non-page-supplier-FLR funcion is initiated, the firmware triggers a page event to the page supplier to indicate that all pages should be returned for the FLR function.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.5
changelog:
  -     *Following issues have been fixed in version 14.31.1014:**
      
        * TX PRBS was not changed even after reconfiguring it, all PRBS mode were enabled in test mode.
        * A fatal error occurred and eventually resulted in the HCA to get into an unresponsive state when a packet was larger than a strided receive WQE that was being scattered.
        * The resource number size (a 64 bit number) was overwritten with a 32 bit number and erased the high bits when de-allocating the resource number.
      
      **Additional Fixes included in version 14.31.1014:**
      
        * Fixed the rate select mechanism in QSFP modules.
        * Fixed classification issues for "Passive" cables to be more robust.
        * Initialized the rate table in the static configuration so it will be configured at the link-not-up scenarios.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6
changelog:
  -     *Firmware for the following device has been updated to 14.32.1010:**
      
        * P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6
changelog:
  -     *The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6-2.1
changelog:
  -     *The following changes have been made in sub-version 1.0.6(A):**
      
        * Product rebuilt to have the new SHA 384 signature.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6-3.1
changelog:
  -     *The following changes have been made in sub-version 1.0.6(B):**
      
        * Product rebuilt to support FIPS mode enabled OS environment.
      
      **The following changes have been made in sub-version 1.0.6(A):**
      
        * Product rebuilt to have the new SHA 384 signature.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.6-4.1
changelog:
  -     *The following issues have been fixed in sub-version 1.0.6(C):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **The following changes have been made in sub-version 1.0.6(B):**
      
        * Product rebuilt to support FIPS mode enabled OS environment.
      
      **The following changes have been made in sub-version 1.0.6(A):**
      
        * Product rebuilt to have the new SHA 384 signature.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.17
changelog:
  -     *The following issues have been fixed in version 2.42.5044 :**
      
        * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      
      
      **The following issues have been fixed in version 16.33.1048:**
      
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * The card occasionally masked some PCIe AER reporting.
        * Incorrect flow of credits blockage that prevented booting during DC cycle test.
        * An issue with BMC medium migration from SMBUS to PCIe, and increased FIFOs to pass large packets in case of the migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.18
changelog:
  -     *Firmware for the following devices has been updated to 2.42.5044 :**
      
        * 779799-B21 (HPE Ethernet 10G 2-port 546FLR-SFP+ Adapter)
        * 779793-B21 (HPE Ethernet 10G 2-port 546SFP+ Adapter)
      
      **Firmware for the following devices has been updated to 14.32.1010:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.34.1002:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
      
      .  
      
      **New features and changes included in version 16.34.1002:**
      
        * Added LLDPEnable, LLDPTransmit and LLDPReceive properties to the RDE Port schema implementation.
        * Added "Command Unsupported" response code in cases when running the MCTP control command "Get Vendor Defined Messages Supported", and there were no supported VDMs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.18
changelog:
  -     *The following issues have been fixed in version 2.42.5044 :**
      
        * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      
      
      **The following issues have been fixed in version 16.34.1002:**
      
        * An issue where set_flow_table_entry failed when aso_flow_meter action was used.
        * A race condition that occured between the duplicate read and QP commands (2RST, 2ERR and Destroy) in the signature that caused the command to hang.
        * When all traffic applications sharing the same combination of <function, priority, side> were rate limited (for example by congestion control), this limit was enforced on other applications with different combinations of <function, priority, side> under the same VL. For example, requestor flows (RDMA-write) were limited to rate X, however, this rate was also enforced on a QP sending RDMA-read responses. This firmware version prevents rate limit enforcement on traffic applications which should not be limited.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.19
changelog:
  -     *Firmware for the following devices has been updated to 2.42.5044 :**
      
        * 779799-B21 (HPE Ethernet 10G 2-port 546FLR-SFP+ Adapter)
        * 779793-B21 (HPE Ethernet 10G 2-port 546SFP+ Adapter)
      
      **Firmware for the following devices has been updated to 14.32.1010:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.35.1012:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
      
      .  
      
      **New features and changes included in version 16.35.1012:**
      
        * Added support for copy modify header steering action to/from the UDP field.
        * Enabled ADP timer to allow the user to configure RC or DC qp_timeout values lower than 16.
        * QoS priority trust default state can now be changed using the new nvconfig below: 
          * QOS_TRUST_STATE_P1
          * QOS_TRUST_STATE_P2
      
      The values that can be used to set the default state are:
      
        * TRUST_PORT
        * TRUST_PCP
        * TRUST_DSCP
        * TRUST_DSCP_PCP


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.19
changelog:
  -     *The following issues have been fixed in version 2.42.5044 :**
      
        * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      
      
      **The following issues have been fixed in version 16.35.1012:**
      
        * RDE (Redfish) PATCH operation to LLDPTransmit properties "ManagementAddressIPv4", "ManagementAddressIPv6" and "ManagementAddressMAC" were applied only in the first attempt, but failed in the next.
        * PLDM AEN event receiver media was changed unexpectedly and destination BDF was overridden with garbage when some PLDM packet were received from the SMBus layer.
        * Bad configuration of number of VFs and SFs led to the consumption of too many functions and triggered a FW assert 0x888E. The reduction flows behavior was fixed to ensure the configuration does not exceed the total number of supported functions. 
        * InfiniBand L2 QP could not receive RDMA traffic occasionally.
        * Running with a debug firmware reduced security as if token was applied.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.20
changelog:
  -     *Firmware for the following devices has been updated to 2.42.5044 :**
      
        * 779799-B21 (HPE Ethernet 10G 2-port 546FLR-SFP+ Adapter)
        * 779793-B21 (HPE Ethernet 10G 2-port 546SFP+ Adapter)
      
      **Firmware for the following devices has been updated to 14.32.1010:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.35.3006:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.20
changelog:
  -     *The following issues have been fixed in version 2.42.5044 :**
      
        * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.20-2.1
changelog:
  -     *Firmware for the following devices has been updated to 2.42.5044 :**
      
        * 779799-B21 (HPE Ethernet 10G 2-port 546FLR-SFP+ Adapter)
        * 779793-B21 (HPE Ethernet 10G 2-port 546SFP+ Adapter)
      
      **Firmware for the following devices has been updated to 14.32.1010:**
      
        * 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
        * 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)
      
      **Firmware for the following device has been updated to 16.35.3006:**
      
        * 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)
      
      **New Features and changes included in version 1.0.20(A):**
      
        * Version 1.0.20(A) has been recompiled to create the firmware RPM compatible with RPM LIB v4.14.2. As a result, this rebuild firmware version 1.0.20(A) can now be installed successfully on a node with FIPS enabled.
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.20-3.1
changelog:
  -     *The following issues have been fixed in component version 1.0.20(B):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      **The following issues have been fixed in version 2.42.5044 :**
      
        * An issue that prevented the firmware from detecting a link_down event thus preventing the IB bond interface from going to a failover mode.
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.11
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.33.1048**
      
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * The card occasionally masked some PCIe AER reporting.
        * Incorrect flow of credits blockage that prevented booting during DC cycle test.
        * An issue with BMC medium migration from SMBUS to PCIe, and increased FIFOs to pass large packets in case of the migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.1012:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.1012:**
      
        * Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software.  
      Note: If the Keep Link Up NV configuration is changed, phyless reset will be
      blocked.
      
        * Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
        * Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
        * Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
        * Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation.
        * Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
        * Disabled the option to send SMPs from unauthorized hosts.
        * Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
        * Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
        * Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter.
        * Enabled delay drop for hairpin packets. If a hairpin QP is created with delay_drop_en enabled, the feature will be enabled across all GVMIs, based on the delay drop status.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.1012**
      
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * The card occasionally masked some PCIe AER reporting.
        * Incorrect flow of credits blockage that prevented booting during DC cycle test.
        * An issue with BMC medium migration from SMBUS to PCIe, and increased FIFOs to pass large packets in case of the migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13-2.1
changelog:
  -     The subversion 1.0.13 (A) of the product has fixed the issue of smart
      component having been built with an incorrect payload.
      
      
      
      **Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13-3.1
changelog:
  -     *The following changes are included in product version 1.0.13(B):**
      
        * Product rebuilt to support FIPS mode enabled OS environment.
      
      **Firmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13-4.1
changelog:
  -     *The following issues have been fixed in component version 1.0.13(C):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      
      
      **Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.7
changelog:
  -     *The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
      
      
      
      **The following issues have been fixed in version 16.33.1048:**
      
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * The card occasionally masked some PCIe AER reporting.
        * Incorrect flow of credits blockage that prevented booting during DC cycle test.
        * An issue with BMC medium migration from SMBUS to PCIe, and increased FIFOs to pass large packets in case of the migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.8
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1010:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.34.1002:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
      
      
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.  
      
      
      **New features and changes included in version 16.34.1002:**
      
        * Added LLDPEnable, LLDPTransmit and LLDPReceive properties to the RDE Port schema implementation.
        * Added "Command Unsupported" response code in cases when running the MCTP control command "Get Vendor Defined Messages Supported", and there were no supported VDMs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.8
changelog:
  -     *The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.  
      
      
      **The following issues have been fixed in version 16.34.1002:**
      
        * An issue where set_flow_table_entry failed when aso_flow_meter action was used.
        * A race condition that occured between the duplicate read and QP commands (2RST, 2ERR and Destroy) in the signature that caused the command to hang.
        * When all traffic applications sharing the same combination of <function, priority, side> were rate limited (for example by congestion control), this limit was enforced on other applications with different combinations of <function, priority, side> under the same VL. For example, requestor flows (RDMA-write) were limited to rate X, however, this rate was also enforced on a QP sending RDMA-read responses. This firmware version prevents rate limit enforcement on traffic applications which should not be limited.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1010:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.35.1012:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
      
      
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.  
      
      
      **New features and changes included in version 16.35.1012:**
      
        * Added support for copy modify header steering action to/from the UDP field.
        * Enabled ADP timer to allow the user to configure RC or DC qp_timeout values lower than 16.
        * QoS priority trust default state can now be changed using the new nvconfig below: 
          * QOS_TRUST_STATE_P1
          * QOS_TRUST_STATE_P2
      
      The values that can be used to set the default state are:
      
        * TRUST_PORT
        * TRUST_PCP
        * TRUST_DSCP
        * TRUST_DSCP_PCP


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.  
      
      
      **The following issues have been fixed in version 16.35.1012:**
      
        * RDE (Redfish) PATCH operation to LLDPTransmit properties "ManagementAddressIPv4", "ManagementAddressIPv6" and "ManagementAddressMAC" were applied only in the first attempt, but failed in the next.
        * PLDM AEN event receiver media was changed unexpectedly and destination BDF was overridden with garbage when some PLDM packet were received from the SMBus layer.
        * Bad configuration of number of VFs and SFs led to the consumption of too many functions and triggered a FW assert 0x888E. The reduction flows behavior was fixed to ensure the configuration does not exceed the total number of supported functions. 
        * InfiniBand L2 QP could not receive RDMA traffic occasionally.
        * Running with a debug firmware reduced security as if token was applied.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1010:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.35.3006:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
      
      
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.  
      
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10
changelog:
  -     *The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.  
      
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10-2.1
changelog:
  -     *Firmware for the following devices has been updated to 14.32.1010:**
      
        * P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
        * P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)
      
      
      
      **Firmware for the following device has been updated to 16.35.3006:**
      
        * P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)
      
      
      
      **New Features and changes included in version 1.0.10(A):**
      
        * Version 1.0.10(A) has been recompiled to create the firmware RPM compatible with RPM LIB v4.14.2. As a result, this rebuild firmware version 1.0.10(A) can now be installed successfully on a node with FIPS enabled.
      
      
      
      **New features and changes included in version 14.32.1010:**
      
        * Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
        * Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.  
      
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.10-3.1
changelog:
  -     *The following issues have been fixed in component version 1.0.10(B):**
      
        * Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.
      
      
      
      **The following issues have been fixed in version 14.32.1010:**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The system could not create more than 128K QPs.
        * On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
        * Packet Pacing rate was used if asymmetric VFs was enabled.
        * Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
        * Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.  
      
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.64_11-17-2022
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code 100E for AMD 2nd Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 2nd Generation EPYC processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.68_02-02-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM updates zlib to 1.2.13 which provides
      mitigation for BIOS security vulnerability documented as CVE-2022-37434.
      
      (https://nvd.nist.gov/vuln/detail/CVE-2022-37434). This security vulnerability
      is documented in the CVE report site. This issue is not unique to HPE servers.
      
      Addressed an issue where some Chinese translation is missing from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.72_04-20-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.E for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.J for AMD 1st Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where an abnormal MR controller name would display when
      setting the system language to Japanese from RBSU, and then rebooting the
      system.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages was not
      synchronized.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.80_07-31-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.F for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.K for AMD 1st Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision provides AMD's mitigation for security vulnerabilities for
      CVE-2022-23829 for AMD 1st Generation EPYC processors, and CVE-2022-23829 and
      CVE-2023-20593 for AMD 2nd Generation EPYC processor. This security
      vulnerability is documented in the CVE report site. This issue is not unique
      to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.0.2zh update which provides mitigation for security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where iLO embedded device health info would display blank
      content under RBSU when the Language was set to Japanese or Chinese.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.84_09-07-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.G for
      AMD 2nd Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 2nd Generation EPYC processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.90_10-19-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.G for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.K for AMD 1st Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where "Restore Manufacturing Defaults" and "Restore
      Defaults" from iLO web did not restore the Secure Boot Status.
      
      Replaced "AC power" with "external power" in the help text of "Automatic
      power-on" option. This is due to ProLiant servers also provide the DC power
      supply option.
      
      Addressed an issue where system might hang while accessing IML logs from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_01-26-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with vulnerability
      fixes in EDK2 NetworkPkg IP stack implementation that is described in the
      address <https://github.com/tianocore/edk2/security/advisories/GHSA-hc6x-cw6p-
      gj7h>.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the mitigation for NetworkPkg PXE IP
      stack vulnerabilities documented as CVE-2023-45229, CVE-2023-45230,
      CVE-2023-45231, CVE-2023-45232, CVE-2023-45233, CVE-2023-45234,
      CVE-2023-45235, CVE-2023-45236, and CVE-2023-45237.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-16-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31315 for AMD 1st and 2nd Generation EPYC processors.
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-45853, CVE-2023-45229, CVE-2022-36763,
      CVE-2022-36764, CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security
      vulnerabilities are documented in the CVE report site. They are not unique to
      HPE servers. This revision of the System ROM includes AMD reference code
      NaplesPI 1.0.0.L for AMD 1st Generation EPYC processors. This revision of the
      System ROM includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation
      EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the operating system could not detect iSCSI drive
      through IPv6 installation when iSCSI IpAddressType was set to auto.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.90_10-19-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.G for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code NaplesPI 1.0.0.K for AMD 1st Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Restore Manufacturing Defaults and Restore Defaults
      from iLO web did not restore the Secure Boot Status.
      
      Replaced "AC power" with "external power" in the help text of "Automatic
      power-on" option. This is due to ProLiant servers also provide the DC power
      supply option.
      
      Addressed an issue where system might hang while accessing IML logs from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-16-2024-2.1
changelog:
  -     See the release document A41_3.20_07_04_2024 in Download Product Binaries page
      from Product Summary of the firmware product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.72_04-20-2023
changelog:
  -     The following options from RBSU will hide if using customized iPXE.
      
       iPXE Script Auto-Start
      
       iPXE Script Verification
      
       iPXE Auto-Start Script Location
      
       Network Location for iPXE Auto-Start Script


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.72_04-20-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.F for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code MilanPI 1.0.0.A for AMD 3rd Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the "Access Control Service" option under RBSU did
      not work.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.80_07-31-2023
changelog:
  -     Added new System Configuration (RBSU) configuration options that allow
      enabling L1 IO Drop Chain Enable to drop chain write support to avoid
      unexpected timeouts due to under certain conditions, some high-bandwidth PCIe
      devices could fail to complete the transaction.
      
      In System Configuration (RBSU), the option is located under L1 IO Drop Chain
      Enable in Service Option when the system is with AMD 3rd Generation EPYC
      processors.
      
      This setting has the following Redfish properties.
      
      /redfish/v1/systems/1/bios/oem/hpe/service/settings/DropChainedWrite


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.80_07-31-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.F for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code MilanPI 1.0.0.B for AMD 3rd Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision provides AMD's mitigation for security vulnerabilities for
      CVE-2022-23829 and CVE-2023-20593 for AMD 2nd Generation EPYC processors, and
      CVE-2022-23829 and CVE-2023-20569 for AMD 3rd Generation EPYC processor. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for security vulnerabilities
      documented as CVE-2023-0286, CVE-2022-4304 and CVE-2023-2650.
      
      Addressed an issue where Secure Boot would not be enabled when loading
      manufacturing default from iLO web.
      
      Addressed an issue where RSOD would occur when entering System Information
      from RBSU under legacy mode.
      
      Addressed an issue where Uncorrectable Machine Check Exception (UMCE) would
      occur due to unexpected completion timeout to cause system not responding.
      Added new System Configuration (RBSU) configuration options that allows
      enabling L1 IO Drop Chain Enable to drop chain write support to avoid
      unexpected timeouts due to under certain conditions, some high-bandwidth PCIe
      devices could fail to complete the transaction.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.84_08-17-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.G for
      AMD 2nd Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1v update which provides mitigation for security vulnerabilities
      documented as CVE-2023-3817.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.90_10-27-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.B
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.G for AMD 2nd Generation EPYC
      processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision provides AMD's mitigation for security vulnerabilities for
      CVE-2023-20592 for both AMD 2nd and 3rd Generation EPYC processors. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      Replaced "AC power" with "external power" in the help text of "Automatic
      power-on" option. This is due to ProLiant servers also provide the DC power
      supply option.
      
      Addressed an issue where system might hang while accessing IML logs from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_01-26-2024
changelog:
  -     Added new Microsoft secure boot keys, KEK2023, Microsoft UEFI CA 2023 and
      Windows UEFI CA 2023, since the original keys will expire in 2026.
      
      Added the System Configuration (RBSU) option "Boot Options/UEFI Boot
      Settings/Filter Non-bootable Drives" and set to "Auto" by default. This
      setting has the following Redfish property:
      
      /redfish/v1/systems/1/bios/settings/FilterNonbootableDrive


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_01-26-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.C
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation EPYC
      processors. This revision of the System ROM includes the mitigation for
      security vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd
      Generation EPYC processors. This security vulnerability is documented in the
      CVE report site. This issue is not unique to HPE servers. This revision of the
      System ROM includes the mitigation for NetworkPkg iSCSI Dxe driver
      vulnerability documented as CVE-2021-38575. This revision of the System ROM
      includes the mitigation for NetworkPkg PXE IP stack vulnerabilities documented
      as CVE-2023-45229, CVE-2023-45230, CVE-2023-45231, CVE-2023-45232,
      CVE-2023-45233, CVE-2023-45234, CVE-2023-45235, CVE-2023-45236, and
      CVE-2023-45237.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd Generation EPYC
      processors. This security vulnerability is documented in the CVE report site.
      This issue is not unique to HPE servers.
      
      This revision of the System ROM includes the mitigation for NetworkPkg iSCSI
      Dxe driver vulnerability documented as CVE-2021-38575.
      
      This revision of the System ROM includes the mitigation for NetworkPkg PXE IP
      stack vulnerabilities documented as CVE-2023-45229, CVE-2023-45230,
      CVE-2023-45231, CVE-2023-45232, CVE-2023-45233, CVE-2023-45234,
      CVE-2023-45235, CVE-2023-45236, and CVE-2023-45237.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-16-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31315 for AMD 2nd and 3rd Generation EPYC processors.
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-45853, CVE-2023-45229, CVE-2022-36763,
      CVE-2022-36764, CVE-2023-5678, CVE-2021-38575 and CVE-2021-38578. The security
      vulnerabilities are documented in the CVE report site. They are not unique to
      HPE servers. This revision of the System ROM includes AMD reference code
      MilanPI 1.0.0.D for AMD 3rd Generation EPYC processors. This revision of the
      System ROM includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation
      EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the operating system could not detect iSCSI drive
      through IPv6 installation when iSCSI IpAddressType was set to auto.
      
      Addressed an issue where system would not complete POST after BIOS firmware
      updated to ver 3.00 with E810-XXVDA4''s installed.
      
      Addressed an issue where system would hang with ASSERT during POST after
      adding DIMMs.
      
      Addressed an issue where the boot order was cleared unexpectedly after
      configuring System Configuration (RBSU) options, navigating to Boot Options >
      UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.
      
      Removed the value of "Not Specified" in System Configuration (RBSU) option
      "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs"
      and set the default value as "SHA1 and SHA256".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-16-2024-2.1
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31315 for AMD 2nd and 3rd Generation EPYC processors.
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-45853, CVE-2023-45229, CVE-2022-36763,
      CVE-2022-36764, CVE-2023-5678, CVE-2021-38575 and CVE-2021-38578. The security
      vulnerabilities are documented in the CVE report site. They are not unique to
      HPE servers. This revision of the System ROM includes AMD reference code
      MilanPI 1.0.0.C for AMD 3rd Generation EPYC processors. This revision of the
      System ROM includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation
      EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the operating system could not detect iSCSI drive
      through IPv6 installation when iSCSI IpAddressType was set to auto.
      
      Addressed an issue where system would not complete POST after BIOS firmware
      updated to ver 3.00 with E810-XXVDA4''s installed.
      
      Addressed an issue where system would hang with ASSERT during POST after
      adding DIMMs.
      
      Addressed an issue where the boot order was cleared unexpectedly after
      configuring System Configuration (RBSU) options, navigating to Boot Options >
      UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.
      
      Removed the value of "Not Specified" in System Configuration (RBSU) option
      "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs"
      and set the default value as "SHA1 and SHA256".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.72_04-20-2023
changelog:
  -     The following options from RBSU will hide if using customized iPXE.
      
      iPXE Script Auto-Start
      
      iPXE Script Verification
      
      iPXE Auto-Start Script Location
      
      Network Location for iPXE Auto-Start Script


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.80_07-31-2023
changelog:
  -     Added new System Configuration (RBSU) configuration options that allow
      enabling L1 IO Drop Chain Enable to drop chain write support to avoid
      unexpected timeouts due to under certain conditions, some high-bandwidth PCIe
      devices could fail to complete the transaction.
      
      In System Configuration (RBSU), the option is located under L1 IO Drop Chain
      Enable in Service Option when the system is with AMD 3rd Generation EPYC
      processors. This setting has the following Redfish properties.
      /redfish/v1/systems/1/bios/oem/hpe/service/settings/DropChainedWrite


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.80_07-31-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code RomePI 1.0.0.F for
      AMD 2nd Generation EPYC processors. This revision of the System ROM includes
      AMD reference code MilanPI 1.0.0.B for AMD 3rd Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision provides AMD's mitigation for security vulnerabilities for
      CVE-2022-23829 and CVE-2023-20593 for AMD 2nd Generation EPYC processors, and
      CVE-2022-23829 and CVE-2023-20569 for AMD 3rd Generation EPYC processor. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for security vulnerabilities
      documented as CVE-2023-0286, CVE-2022-4304 and CVE-2023-2650.
      
      Addressed an issue where Secure Boot would not be enabled when loading
      manufacturing default from iLO web.
      
      Addressed an issue where RSOD would occur when entering "System Information"
      from RBSU under legacy mode.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_01-26-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.C
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation EPYC
      processors. This revision of the System ROM includes the mitigation for
      security vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd
      Generation EPYC processors. This security vulnerability is documented in the
      CVE report site. This issue is not unique to HPE servers. This revision of the
      System ROM includes the mitigation for NetworkPkg iSCSI Dxe driver
      vulnerability documented as CVE-2021-38575. This revision of the System ROM
      includes the mitigation for NetworkPkg PXE IP stack vulnerabilities documented
      as CVE-2023-45229, CVE-2023-45230, CVE-2023-45231, CVE-2023-45232,
      CVE-2023-45233, CVE-2023-45234, CVE-2023-45235, CVE-2023-45236, and
      CVE-2023-45237.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd Generation EPYC
      processors. This security vulnerability is documented in the CVE report site.
      This issue is not unique to HPE servers.
      
      This revision of the System ROM includes the mitigation for NetworkPkg iSCSI
      Dxe driver vulnerability documented as CVE-2021-38575.
      
      This revision of the System ROM includes the mitigation for NetworkPkg PXE IP
      stack vulnerabilities documented as CVE-2023-45229 CVE-2023-45230
      CVE-2023-45231 CVE-2023-45232 CVE-2023-45233 CVE-2023-45234 CVE-2023-45235
      CVE-2023-45236 CVE-2023-45237.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_01-26-2024
changelog:
  -     Added new Microsoft secure boot keys, KEK2023, Microsoft UEFI CA 2023 and
      Windows UEFI CA 2023, since the original keys will expire in 2026.
      
      Added the System Configuration (RBSU) option "Boot Options/UEFI Boot
      Settings/Filter Non-bootable Drives" and set to "Auto" by default. This
      setting has the following Redfish property:
      /redfish/v1/systems/1/bios/settings/FilterNonbootableDrive


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_01-26-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.C
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation EPYC
      processors. This revision of the System ROM includes the mitigation for
      security vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd
      Generation EPYC processors. This security vulnerability is documented in the
      CVE report site. This issue is not unique to HPE servers. This revision of the
      System ROM includes the mitigation for NetworkPkg iSCSI Dxe driver
      vulnerability documented as CVE-2021-38575. This revision of the System ROM
      includes the mitigation for NetworkPkg PXE IP stack vulnerabilities documented
      as CVE-2023-45229 CVE-2023-45230 CVE-2023-45231 CVE-2023-45232 CVE-2023-45233
      CVE-2023-45234 CVE-2023-45235 CVE-2023-45236 CVE-2023-45237.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd Generation EPYC
      processors. This security vulnerability is documented in the CVE report site.
      This issue is not unique to HPE servers. This revision of the System ROM
      includes the mitigation for NetworkPkg iSCSI Dxe driver vulnerability
      documented as CVE-2021-38575. This revision of the System ROM includes the
      mitigation for NetworkPkg PXE IP stack vulnerabilities documented as
      CVE-2023-45229 CVE-2023-45230 CVE-2023-45231 CVE-2023-45232 CVE-2023-45233
      CVE-2023-45234 CVE-2023-45235 CVE-2023-45236 CVE-2023-45237.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_01-26-2024-2.1
changelog:
  -     *Important Notes:**
      
      Ver. 3.00_01-26-2024(B) contains updates to the firmware packaging and is
      functionally equivalent to ver. 3.00_01-26-2024. It is not necessary to
      upgrade with Revision B if a previous component revision was used to upgrade
      the firmware to version 3.00_01-26-2024.
      
      This revision of the System ROM includes AMD reference code MilanPI 1.0.0.C
      for AMD 3rd Generation EPYC processors. This revision of the System ROM
      includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation EPYC
      processors. This revision of the System ROM includes the mitigation for
      security vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd
      Generation EPYC processors. This security vulnerability is documented in the
      CVE report site. This issue is not unique to HPE servers. This revision of the
      System ROM includes the mitigation for NetworkPkg iSCSI Dxe driver
      vulnerability documented as CVE-2021-38575. This revision of the System ROM
      includes the mitigation for NetworkPkg PXE IP stack vulnerabilities documented
      as CVE-2023-45229 CVE-2023-45230 CVE-2023-45231 CVE-2023-45232 CVE-2023-45233
      CVE-2023-45234 CVE-2023-45235 CVE-2023-45236 CVE-2023-45237.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31346 and CVE-2023-31347 for AMD 3rd Generation EPYC
      processors. This security vulnerability is documented in the CVE report site.
      This issue is not unique to HPE servers. This revision of the System ROM
      includes the mitigation for NetworkPkg iSCSI Dxe driver vulnerability
      documented as CVE-2021-38575. This revision of the System ROM includes the
      mitigation for NetworkPkg PXE IP stack vulnerabilities documented as
      CVE-2023-45229 CVE-2023-45230 CVE-2023-45231 CVE-2023-45232 CVE-2023-45233
      CVE-2023-45234 CVE-2023-45235 CVE-2023-45236 CVE-2023-45237.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-17-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31315 for AMD 2nd and 3rd Generation EPYC processors.
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-45853, CVE-2023-45229, CVE-2022-36763,
      CVE-2022-36764, CVE-2023-5678, CVE-2021-38575 and CVE-2021-38578. The security
      vulnerabilities are documented in the CVE report site. They are not unique to
      HPE servers. This revision of the System ROM includes AMD reference code
      MilanPI 1.0.0.C for AMD 3rd Generation EPYC processors. This revision of the
      System ROM includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation
      EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the operating system could not detect iSCSI drive
      through IPv6 installation when iSCSI IpAddressType was set to auto. Addressed
      an issue where system would not complete POST after BIOS firmware updated to
      ver 3.00 with E810-XXVDA4's installed. Addressed an issue where system would
      hang with ASSERT during POST after adding DIMMs. Addressed an issue where the
      boot order was cleared unexpectedly after configuring System Configuration
      (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot
      Order, and then pressing F12 to Save and Exit. Removed the value of "Not
      Specified" in System Configuration (RBSU) option "Server Security/Trusted
      Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value
      as "SHA1 and SHA256".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-17-2024-2.1
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31315 for AMD 2nd and 3rd Generation EPYC processors.
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-45853, CVE-2023-45229, CVE-2022-36763,
      CVE-2022-36764, CVE-2023-5678, CVE-2021-38575 and CVE-2021-38578. The security
      vulnerabilities are documented in the CVE report site. They are not unique to
      HPE servers. This revision of the System ROM includes AMD reference code
      MilanPI 1.0.0.C for AMD 3rd Generation EPYC processors. This revision of the
      System ROM includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation
      EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the operating system could not detect iSCSI drive
      through IPv6 installation when iSCSI IpAddressType was set to auto. Addressed
      an issue where system would not complete POST after BIOS firmware updated to
      ver 3.00 with E810-XXVDA4's installed. Addressed an issue where system would
      hang with ASSERT during POST after adding DIMMs. Addressed an issue where the
      boot order was cleared unexpectedly after configuring System Configuration
      (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot
      Order, and then pressing F12 to Save and Exit. Removed the value of "Not
      Specified" in System Configuration (RBSU) option "Server Security/Trusted
      Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value
      as "SHA1 and SHA256". Addressed an issue where GPUs 0 and 1 in slots 2,4 are
      disabled when a PCIe device in slot 17 is disabled.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-17-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-31315 for AMD 2nd and 3rd Generation EPYC processors.
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-45853, CVE-2023-45229, CVE-2022-36763,
      CVE-2022-36764, CVE-2023-5678, CVE-2021-38575 and CVE-2021-38578. The security
      vulnerabilities are documented in the CVE report site. They are not unique to
      HPE servers. This revision of the System ROM includes AMD reference code
      MilanPI 1.0.0.C for AMD 3rd Generation EPYC processors. This revision of the
      System ROM includes AMD reference code RomePI 1.0.0.H for AMD 2nd Generation
      EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the operating system could not detect iSCSI drive
      through IPv6 installation when iSCSI IpAddressType was set to auto. Addressed
      an issue where system would not complete POST after BIOS firmware updated to
      ver 3.00 with E810-XXVDA4's installed. Addressed an issue where system would
      hang with ASSERT during POST after adding DIMMs. Addressed an issue where the
      boot order was cleared unexpectedly after configuring System Configuration
      (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot
      Order, and then pressing F12 to Save and Exit. Removed the value of "Not
      Specified" in System Configuration (RBSU) option "Server Security/Trusted
      Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value
      as "SHA1 and SHA256". Addressed an issue where only one GPU will be detected
      after BIOS firmware updated to ver 3.00 with four GPUs installed.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.78_03-16-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where servers may stop responding during boot when the
      Intel TXT function is enabled.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.80_04-20-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.2 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-38087. This security
      vulnerability is documented in the CVE report site. This issue is not unique
      to HPE servers.
      
      Addressed the issue where the system might hang due to invalid memory free and
      usage when TPM is enabled.
      
      Addressed the issue where the PCIe device serial number in OEM SMBIOS type 203
      does not populate in some cases.
      
      Addressed the issue where the power-on-password dialog popped up even though
      user did not set the password.
      
      Addressed the issue where the TPM status between RBSU and iLO web pages was
      not synchronized.
      
      Addressed the issue where BIOS does not correctly log memory error data and
      memory health telemetry in AHS.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.90_07-20-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-43505 and CVE-2022-40982. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.0.2zh update which provides mitigation for security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where iLO embedded device health info would display blank
      content under RBSU when the Language was set to Japanese or Chinese.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_10-19-2023
changelog:
  -     Replaced "AC power" with "external power" in the help text of "Automatic
      power-on" option. This is due to ProLiant servers also provide the DC power
      supply option.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_10-19-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where "Restore Manufacturing Defaults" and "Restore
      Defaults" from iLO web did not restore the Secure Boot Status.
      
      Addressed an issue where BIOS did not report CPU status correctly to iLO, and
      OneView would receive notification when Uncorrectable Machine Check Exception
      (UMCE) occurs.
      
      Addressed an issue where system might hang while accessing IML logs from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_02-22-2024
changelog:
  -     Patch for CVE-2021-38575: The vulnerability allows a remote attacker to
      execute arbitrary code on the target system.
      
      Patch the primary APIC ID for SMBIOS type 211: Some special CPUs may not have
      an intra-processor APIC ID == 00h and may cause wrong TControl data.
      
      Patch for CVE-2023-45853: The vulnerability allows a remote attacker to
      execute arbitrary code on the target system.
      
      The vulnerability exists due to a boundary error in the IScsiHexToBin()
      function in NetworkPkg/IScsiDxe. A remote attacker with ability to inject data
      into communication between edk2 and the iSCSI target can execute arbitrary
      code on the target system.
      
      Prevented a non-standard VPD content from causing the UEFI read function to
      become write.
      
      Patch for CVE-2022-36763 and CVE-2022-36764: EDK2 is susceptible to a
      vulnerability in the Tcg2MeasureGptTable() function, allowing a user to
      trigger a heap buffer overflow via a local network. Successful exploitation of
      this vulnerability may result in a compromise of confidentiality, integrity,
      and/or availability.
      
      Added a new event support for IML.
      
      Patch for CVE-2023-45229: EDK2 NetworkPkg Vulnerability
      
      Added an additional retry mechanisms to avoid a BIOS hang from iLO failure.
      
      Corrected Redfish Property value changed from vN_N_N to N.N.N in uri:
      
      /redfish/v1/registrystore/registries/{lang}/biosattributeregistry{Platform}.vN
      _N_N
      
      there, {lang} = { en, ja, zh }, {platform} = Platform Name e.g. A55, U63 ,
      vN_N_N =
      
      version number defined as Redfish specification
      
      [Example]
      
      uri: /redfish/v1/registrystore/registries/zh/biosattributeregistrya55.v1_1_20
      
      Property of RegistryVersion is changed from v1_1_20 to 1.1.20


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_02-22-2024
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where SBCE and ECC storm records may disappear from AHS.
      
      Addressed an issue where the iSCSI SW IPv6 HDD is not found under OS when the
      iSCSI IpAddressType is set to Auto.
      
      Addressed an issue where the server may hang due to an IE function error.
      
      Merged the solutions from EDK2 for vulnerabilities:
      
      \- Buffer overflow in the DHCPv6 client via a long Server ID option
      
      \- Out-of-bounds read when handling a ND Redirect message with truncated
      options
      
      \- Infinite loop when parsing unknown options in the Destination Options
      header
      
      \- Infinite loop when parsing a PadN option in the Destination Options header
      
      \- Buffer overflow when processing DNS Servers option in a DHCPv6 Advertise
      message
      
      \- Predictable TCP ISNs
      
      \- Use of a Weak PseudoRandom Number Generator
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.20_05-27-2024
changelog:
  -     Added value "C6 without C1E" in System Configuration (RBSU) option "Power
      Management/Advanced Power Options menu/Minimum Processor Idle Power Core
      C-State". When selected, the Minimum Processor Idle Power Core C-State is C6
      with C1E disabled. This setting has the following Redfish property:
      /redfish/v1/systems/1/bios/MinProcIdlePower


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.20_05-27-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security
      vulnerabilities are documented in the CVE report site. They are not unique to
      HPE servers. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 04.01.05.002.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may encounter a RSOD while updating SAS drive
      FW via HPE Service Packs, including, but not limited to, VMware ESXi Online
      HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02
      (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July
      2024).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.90_07-20-2023
changelog:
  -     This revision of the System ROM includes the latest revision of the Intel IPU
      2023.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-43505 and CVE-2022-40982. This
      security vulnerability is documented in the CVE report site.  This issue is
      not unique to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.0.2zh update which provides mitigation for security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where iLO embedded device health info would display blank
      content under RBSU when the Language was set to Japanese or Chinese.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_10-19-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Restore Manufacturing Defaults and Restore Defaults
      from iLO web did not restore the Secure Boot Status.
      
      Addressed an issue where BIOS did not report CPU status correctly to iLO, and
      OneView would receive notification when Uncorrectable Machine Check Exception
      (UMCE) occurs.
      
      Addressed an issue where system might hang while accessing IML logs from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_02-22-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.01.05.002.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where SBCE and ECC storm records may disappear from AHS.
      
      Addressed an issue where the iSCSI SW IPv6 HDD is not found under OS when the
      iSCSI IpAddressType is set to Auto.
      
      Addressed an issue where the server may hang due to an IE function error.
      
      Merged the solutions from EDK2 for vulnerabilities:
      
      \- Buffer overflow in the DHCPv6 client via a long Server ID option
      
      \- Out-of-bounds read when handling a ND Redirect message with truncated
      options
      
      \- Infinite loop when parsing unknown options in the Destination Options
      header
      
      \- Infinite loop when parsing a PadN option in the Destination Options header
      
      \- Buffer overflow when processing DNS Servers option in a DHCPv6 Advertise
      message
      
      \- Predictable TCP ISNs
      
      \- Use of a Weak PseudoRandom Number Generator
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.64_10-13-2022
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2022.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2022.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-26837. This security
      vulnerability is documented in the CVE report site. This issue is not unique
      to HPE servers.
      
      Addressed an issue where firmware BootTimer would cause a black screen hang
      when switching TPM 1.2 to 2.0.
      
      Addressed an issue TPM Visibility option in ROM Based Setup Utility (RBSU)
      would be greyed out after upgrading the system ROM from 2.54 to 2.58.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.68_01-12-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.1 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.1 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-33894 and CVE-2022-26837. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      This revision of the System ROM includes the revision of the zlib library
      1.2.13 update which provides mitigation for security vulnerabilities
      documented as CVE-2022-37434.
      
      Addressed an issue that system will hang when BIOS tries to print a large IML
      message on POST screen.
      
      Addressed an issue when system discovers thousands of LUNs and was trying to
      create thousands of boot options for each LUN. System cannot add, delete or
      adjust new boot options on iLO web and RBSU after rebooting. System becomes
      unstable unless loading manufacture defaults.
      
      Addressed an issue where some Chinese and Japaneses translations were missing
      from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.72_04-20-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.2 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-33894 and CVE-2022-38087. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      Addressed an issue where the PCIe device serial number in OEM SMBIOS type 203
      does not populate in some cases.
      
      Addressed an issue where the power-on-password dialog popped up even though
      user did not set a password.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages was not
      synchronized.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.80_07-20-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-44611 and CVE-2022-40982. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.0.2zh update which provides mitigation for security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where iLO embedded device health info would display blank
      content under RBSU when the Language was set to Japanese or Chinese.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.90_10-19-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where "Restore Manufacturing Defaults" and "Restore
      Defaults" from iLO web did not restore the Secure Boot Status.
      
      Addressed an issue where system might hang while accessing IML log from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_02-01-2024
changelog:
  -     Redfish Property value changed from vN_N_N to N.N.N in uri:
      
      /redfish/v1/registrystore/registries/{lang}/biosattributeregistry{Platform}.vN
      _N_N
      
      there, {lang} = { en, ja, zh }, {platform} = Platform Name e.g. A55, U63 ,
      vN_N_N =
      
      version number defined as Redfish specification
      
      [Example]
      
      uri: /redfish/v1/registrystore/registries/zh/biosattributeregistrya55.v1_1_20
      
      Property of RegistryVersion is changed from v1_1_20 to 1.1.20


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00_02-01-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM contains updates aligned with the Intel
      Product Update (IPU) version IPU.2024.1 guidance. This revision of the System
      ROM includes the mitigation for vulnerabilities documented as CVE-2023-45853
      and CVE-2021-38575. This revision of the System ROM includes the revision of
      the OpenSSL library 1.0.2zi update which provides mitigation for security
      vulnerabilities documented as CVE-2023-3817. This revision of the System ROM
      includes the mitigation for NetworkPkg PXE IP stack vulnerabilities documented
      as CVE-2023-45229, CVE-2023-45230, CVE-2023-45231, CVE-2023-45232,
      CVE-2023-45233, CVE-2023-45234, CVE-2023-45235, CVE-2023-45236, and
      CVE-2023-45237. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 05.01.04.913.
      
      **Firmware Dependencies:**
      
      **Problems Fixed:**
      
      This revision of the System ROM contains updates aligned with the Intel
      Product Update (IPU) version IPU.2024.1 guidance.
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2023-45853 and CVE-2021-38575.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.0.2zi update which provides mitigation for security vulnerabilities
      documented as CVE-2023-3817.
      
      This revision of the System ROM includes the mitigation for NetworkPkg PXE IP
      stack vulnerabilities documented as CVE-2023-45229, CVE-2023-45230,
      CVE-2023-45231, CVE-2023-45232, CVE-2023-45233, CVE-2023-45234,
      CVE-2023-45235, CVE-2023-45236, and CVE-2023-45237.
      
      Addressed an issue where the operating system cannot detect the iSCSI hard
      drive through IPv6 installation if the iSCSI IpAddressType is set to auto.
      
      **Known Issues:**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.10_05-16-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for security
      vulnerabilities CVE-2023-45229, CVE-2022-36763, CVE-2022-36764,
      CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security vulnerabilities
      are documented in the CVE report site. They are not unique to HPE servers.
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 05.01.04.913.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added value "C6 without C1E" in System Configuration (RBSU) option "Power
      Management/Advanced Power Options menu/Minimum Processor Idle Power Core
      C-State". When selected, the Minimum Processor Idle Power Core C-State is C6
      with C1E disabled. This setting has the following Redfish property:
      /redfish/v1/systems/1/bios/MinProcIdlePower
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.80_07-05-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-43505, CVE-2022-40982,
      CVE-2023-23908 and CVE-2022-41804. This security vulnerability is documented
      in the CVE report site. This issue is not unique to HPE servers.
      
      Address an issue where an abnormal power-on-password dialog would pop up even
      though user did not set a password.
      
      Address the issue where the RBSU "Storage Device Information" was empty when
      VROC is enabled.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for security vulnerabilities
      documented as CVE-2023-0286, CVE-2022-4304 and CVE-2023-2650.
      
      Address the issue where the TPM status displayed in RBSU and iLO web page was
      not in sync.
      
      Address the issue where Secure Boot would not be enabled when loading
      manufacturing default from iLO web.
      
      Address an issue where RSOD would occur when entering "System Information"
      from RBSU under legacy mode.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.90_10-19-2023
changelog:
  -     Replaced "AC power" with "external power" in the help text of "Automatic
      power-on" option. This is due to ProLiant servers also provide the DC power
      supply option.
      
      Added "DMI Power Management (ASPM)" option in RBSU. The option has the default
      value of "disable", which will override default setting of "enable" from the
      previous ROM. This is due to enabling DMI power management might result in
      system hang with machine check exception based on Intel erratum RKL-15.
      
      The path to the option is: Processor Options -> DMI Power Management (ASPM)
      
      This setting has the Redfish property URI of:
      /redfish/v1/systems/1/bios/settings/E3DmiAspm
      
      To follow DMTF schema, change the Redfish registry version naming to have the
      pattern of "^\d+.\d+.\d+$".
      
      For example,
      /redfish/v1/registrystore/registries/zh/biosattributeregistrya55.v1_1_20 will
      now becomes
      /redfish/v1/registrystore/registries/zh/biosattributeregistrya55.1.1.20


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.90_10-19-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.4 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.4 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2023-23583. This security
      vulnerability is documented in the CVE report site. This issue is not unique
      to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1v update which provides mitigation for security vulnerabilities
      documented as CVE-2023-3817.
      
      Addressed an issue where system might hang while accessing IML logs from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00_03-06-2024
changelog:
  -     Enhanced the SMBIOS type 203 ability for PCI device information displays that
      can support when the PCI slot is bifurcated.
      
      Added an option of "Filter Non-bootable Drives" in RBSU Boot Options.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00_03-06-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the PCI VPD data would be written unconditionally
      while system is accessing to PCI VPD.
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2024.1 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2021-38575, CVE-2022-36763,
      CVE-2022-36764, CVE-2023-45229 and CVE-2023-45853. This security vulnerability
      is documented in the CVE report site. This issue is not unique to HPE servers.
      
      Addressed an issue where the UBM version between RBSU and iLO web pages was
      not synchronized.
      
      Addressed an issue where NVME hot plug when installing fully loaded NVME
      drives.
      
      Addressed an issue vulnerabilities in network IP stack documented as from
      CVE-2023-45230 to CVE-2023-45237.
      
      Addressed an issue where the PCIE slot control would disappear in RBSU when
      the PCIE switchboard is installed in the system.
      
      Addressed an issue where the iSCSI SW ipv6 HDD can't be found under OS when
      iSCSI IP Address Type option is set to "Auto" in RBSU Network Options / iSCSI
      Configuration / Add an iSCSI Attempt > select Network device > IP Address
      Type.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_05-27-2024
changelog:
  -     Added new Microsoft secure boot keys, KEK2023, Microsoft UEFI CA 2023 and
      Windows UEFI CA 2023, since the original keys will expire in 2026.
      
      Added the System Configuration (RBSU) option "Boot Options/UEFI Boot
      Settings/Filter Non-bootable Drives" and set to "Auto" by default. This
      setting has the following Redfish property:
      
      /redfish/v1/systems/1/bios/settings/FilterNonbootableDrive
      
      Added value "C6 without C1E" in System Configuration (RBSU) option "Power
      Management/Advanced Power Options menu/Minimum Processor Idle Power Core
      C-State". When selected, the Minimum Processor Idle Power Core C-State is C6
      with C1E disabled. This setting has the following Redfish property:
      /redfish/v1/systems/1/bios/MinProcIdlePower


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_05-27-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2024.2 guidance. This revision of the System ROM
      includes the mitigation for security vulnerabilities CVE-2023-5678,
      CVE-2021-38575 and CVE-2021-38578. The security vulnerabilities are documented
      in the CVE report site. They are not unique to HPE servers. This version of
      the System ROM should be paired with Server Platform Services (SPS) Firmware
      04.04.04.603 (2.00_12_18_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang up with fully installed NVMe drives.
      
      Addressed an issue where SMBIOS type 203 show incorrect information when
      Bifurcation/Dual-Bifurcation is enabled.
      
      Addressed an issue where the RBSU\Firmware update shows "Flash successfully"
      message when incorrect SATA firmware was loaded for upgrade.
      
      Addressed an issue where the boot order was cleared unexpectedly after
      configuring System Configuration (RBSU) options, navigating to Boot Options >
      UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.
      
      Addressed an issue where UMB firmware version showed incorrectly in Firmware
      information of System Configuration (RBSU).
      
      Removed the value of "Not Specified" in System Configuration (RBSU) option
      "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs"
      and set the default value as "SHA1 and SHA256".
      
      Addressed an issue where system may encounter a RSOD while updating SAS drive
      FW via HPE Service Packs, including, but not limited to, VMware ESXi Online
      HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02
      (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July
      2024).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12_06-14-2024
changelog:
  -     Added the System Configuration (RBSU) options "PCIe Device
      Configuration/Advanced PCIe Configuration/PCIe Data Link Feature/PCIe Slot XX
      Data Link Feature Exchange" and set to "Enabled" by default. These options can
      be used to disable Data Link Feature Exchange when a legacy (Gen 3 or older)
      PCIe card is installed, which is not compatible with this feature. This
      setting has the following Redfish properties:
      
      /redfish/v1/systems/1/bios/settings/SlotXXDataLinkFeatureExchange


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12_06-14-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the RBSU/Firmware update shows "Flash successfully"
      message when incorrect SATA firmware was loaded for upgrade.
      
      Addressed an issue where system failed to boot with selected NVMe HDD by
      setting One-Time Boot Option in ILO Web.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.80_07-05-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-43505, CVE-2022-40982,
      CVE-2023-23908 and CVE-2022-41804. This security vulnerability is documented
      in the CVE report site. This issue is not unique to HPE servers.
      
      Address an issue where an abnormal power-on-password dialog would pop up even
      though user did not set a password.
      
      Address the issue where the RBSU "Storage Device Information" was empty when
      VROC is enabled.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for security vulnerabilities
      documented as CVE-2023-0286, CVE-2022-4304 and CVE-2023-2650.
      
      Address the issue where the TPM status displayed in RBSU and iLO web page was
      not in sync.
      
      Address the issue where Secure Boot would not be enabled when loading
      manufacturing default from iLO web.
      
      Address an issue where RSOD would occur when entering System Information from
      RBSU under legacy mode.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00_02-22-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the PCI VPD data would be written unconditionally
      while system is accessing to PCI VPD.
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2024.1 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2021-38575, CVE-2022-36763,
      CVE-2022-36764, CVE-2023-45229 and CVE-2023-45853. This security vulnerability
      is documented in the CVE report site. This issue is not unique to HPE servers.
      
      Addressed an issue where the UBM version between RBSU and iLO web pages was
      not synchronized.
      
      Addressed an issue where NVME hot plug when installing fully loaded NVME
      drives.
      
      Addressed an issue vulnerabilities in network IP stack documented as from
      CVE-2023-45230 to CVE-2023-45237.
      
      Addressed an issue where the PCIE slot control would disappear in RBSU when
      the PCIE switchboard is installed in the system.
      
      Addressed an issue where the iSCSI SW ipv6 HDD can't be found under OS when
      iSCSI IP Address Type option is set to Auto in RBSU Network Options / iSCSI
      Configuration / Add an iSCSI Attempt > select Network device > IP Address
      Type.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.90_10-19-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Restore Manufacturing Defaults and Restore Defaults
      from iLO web did not restore the Secure Boot Status.
      
      Addressed an issue where system might hang while accessing IML log from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.64_10-20-2022
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2022.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2022.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-21198 and CVE-2022-26837. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      Addressed an issue where "Reboot Required" radio button isn't highlighted
      after BIOS restore.
      
      Addressed an issue where an HPE MR controller's name is displayed abnormally
      after setting the language to Japanese in ROM Based Setup Utility (RBSU)
      rebooting the system.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.68_01-12-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.1 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.1 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-26837, CVE-2022-38090 and
      CVE-2022-30704. This security vulnerability is documented in the CVE report
      site. This issue is not unique to HPE servers.
      
      This revision of the System ROM includes the revision of the zlib library
      1.2.13 update which provides mitigation for security vulnerabilities
      documented as CVE-2022-37434.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1s update which provides mitigation for security vulnerabilities
      documented as CVE-2022-2097.
      
      Addressed an issue where RBSU PCI device information page does not display the
      Intel VROC SATA firmware firmware version correctly.
      
      Addressed an issue where NVMe drive info cannot display properly in iLO web
      when PCH VMD is enabled.
      
      Addressed an issue when system discovers thousands of LUNs and was trying to
      create thousands of boot options for each LUNs. System cannot add, delete or
      adjust new boot options on iLO web and RBSU after rebooting. System becomes
      unstable unless loading manufacture default.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.72_04-20-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the field "DIMM Map-Out Reason" of OEM SMBIOS type
      232 would update incorrectly per DIMM status.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages were
      not synchronized.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.80_07-20-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-44611 and CVE-2022-40982. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for security vulnerabilities
      documented as CVE-2023-0286, CVE-2022-4304 and CVE-2023-2650.
      
      Address an issue where an abnormal power-on-password dialog would pop up even
      though user did not set a password.
      
      Address the issue where Secure Boot would not be enabled when loading
      manufacturing default from iLO web.
      
      Address an issue where RSOD would occur when entering "System Information"
      from RBSU under legacy mode.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00_02-01-2024
changelog:
  -     Added new Microsoft secure boot keys, KEK2023, Microsoft UEFI CA 2023 and
      Windows UEFI CA 2023, since the original keys will expire in 2026.
      
      Corrected Redfish Property value changed from vN_N_N to N.N.N in uri:
      
      /redfish/v1/registrystore/registries/{lang}/biosattributeregistry{Platform}.vN
      _N_N
      
      there, {lang} = { en, ja, zh }, {platform} = Platform Name e.g. A55, U63 ,
      vN_N_N =
      
      version number defined as Redfish specification
      
      [Example]
      
      uri: /redfish/v1/registrystore/registries/zh/biosattributeregistrya55.v1_1_20
      
      Property of RegistryVersion is changed from v1_1_20 to 1.1.20
      
      Added the System Configuration (RBSU) option "Boot Options/UEFI Boot
      Settings/Filter Non-bootable Drives" and set to "Auto" by default. This
      setting has the following Redfish property:
      
      /redfish/v1/systems/1/bios/settings/FilterNonbootableDrive


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00_02-01-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM contains updates aligned with the Intel
      Product Update (IPU) version IPU.2024.1 guidance. This revision of the System
      ROM includes the mitigation for vulnerabilities documented as CVE-2021-38575,
      CVE-2023-45853, CVE-2022-36763 and CVE-2022-36764. This revision of the System
      ROM includes the mitigation for NetworkPkg PXE IP stack vulnerabilities
      documented as CVE-2023-45229, CVE-2023-45230, CVE-2023-45231, CVE-2023-45232,
      CVE-2023-45233, CVE-2023-45234, CVE-2023-45235, CVE-2023-45236, and
      CVE-2023-45237. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).
      
      **Firmware Dependencies:**
      
      **Problems Fixed:**
      
      This revision of the System ROM contains updates aligned with the Intel
      Product Update (IPU) version IPU.2024.1 guidance.
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2021-38575, CVE-2023-45853, CVE-2022-36763 and
      CVE-2022-36764.
      
      This revision of the System ROM includes the mitigation for NetworkPkg PXE IP
      stack vulnerabilities documented as CVE-2023-45229, CVE-2023-45230,
      CVE-2023-45231, CVE-2023-45232, CVE-2023-45233, CVE-2023-45234,
      CVE-2023-45235, CVE-2023-45236, and CVE-2023-45237.
      
      Addressed an issue where the operating system cannot detect the iSCSI hard
      drive through IPv6 installation if the iSCSI IpAddressType is set to auto.
      
      Addressed an issue where DmiAspmCtrl was not set accordingly when setting DMI
      ASPM to Disabled/L1 Enabled.
      
      **Known Issues:**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_05-16-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.00.03.604 (2.00_12_20_2023). This version of the System ROM
      contains updates aligned with the Intel Product Update (IPU) version
      IPU.2024.1 guidance. This revision of the System ROM includes the mitigation
      for security vulnerabilities CVE-2023-45229, CVE-2023-5678, and
      CVE-2021-38578. The security vulnerabilities are documented in the CVE report
      site. They are not unique to HPE servers. This version of the System ROM
      should be paired with Server Platform Services (SPS) Firmware 06.00.03.604
      (2.00_12_20_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the boot order was cleared unexpectedly after
      configuring System Configuration (RBSU) options, navigating to Boot Options >
      UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.
      
      Removed the value of "Not Specified" in System Configuration (RBSU) option
      "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs"
      and set the default value as "SHA1 and SHA256".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.64_10-20-2022
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2022.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2022.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-21198 and CVE-2022-26837. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      Addressed an issue where Reboot Required radio button isn't highlighted after
      BIOS restore.
      
      Addressed an issue where an HPE MR controller's name is displayed abnormally
      after setting the language to Japanese in ROM Based Setup Utility (RBSU)
      rebooting the system.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.72_05-02-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the field DIMM Map-Out Reason of OEM SMBIOS type 232
      would update incorrectly per DIMM status.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages were
      not synchronized.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.80_07-20-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2023.3 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the Intel IPU
      2023.3 BIOS update which provides Intel's mitigation for BIOS advisory and
      security vulnerabilities documented as CVE-2022-44611 and CVE-2022-40982. This
      security vulnerability is documented in the CVE report site. This issue is not
      unique to HPE servers.
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for security vulnerabilities
      documented as CVE-2023-0286, CVE-2022-4304 and CVE-2023-2650.
      
      Address an issue where an abnormal power-on-password dialog would pop up even
      though user did not set a password.
      
      Address the issue where Secure Boot would not be enabled when loading
      manufacturing default from iLO web.
      
      Address an issue where RSOD would occur when entering System Information from
      RBSU under legacy mode.
      
      **Known Issues:**
      
      None


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.10.19.30-1
changelog:
  - This driver fix unexpected error message appears in dmesg when driver is loaded.
  - This driver fix VF 0 does not show via sysfs, and cannot be removed.
  - This driver fix 1g speed i40e_aq_run_phy_activity() from f/w reports lpi statistics always as 0


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.24.6-1.rhel8u8
changelog:
  - This driver fixes the issue of restoring all VF-d config on a VF reset.
  - This driver fixes the issue of mirror rule via VF-d.
  - This driver fixes the issue of VFD handler function prototypes.
  - This driver fixes the issue of assuming hardware is at default when that's not always true. 
  - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout.
  - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly.
  - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'.
  - This driver now introduce allow_untagged VF-d attribute.
  - This driver now add a helper function to validate a vf based on the vf id.
  - This driver now add a macro for checking if prog_attached exists.
  - This driver now add client register/unregister to prevent vsi.
  - Added RHEL7u6 Support.
  - Added SLES12SP4 Support.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.10.14-1
changelog:
  - This driver added the "Negotiated" string into the i40e_print_link_message() function. 
  - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS)
  - This driver remove RDMA VF code from files including VF support.
  - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.10.16-1
changelog:
  - This driver add support to expose VF stats as part of PF interface ethtool stats.
  - This driver fix i40e Mirrors not clear after VF remove.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.10.19.81-1
changelog:
  - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf
  - This driver fix an error message appeared like "0000 [#1] SMP PTI"


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.15.6
changelog:
  - Removes rx_fragments and rx_jabber from rx_errors to avoid rx_jabber and rx_fragments incorrectly double count.
  - Fixes ethtool warning message caused by incorrect data structure
  - Add RHEL8.4 Support


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 4.0.1-1
changelog:
  - Add SLES15 SP2 support
  - This driver fix system freezes when trying to create TCs on VF with no more VSIs available.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.3-1
changelog:
  - Added RHEL 6.8 support
  - Fix the issue of getting crash dump when loading igb module(modprobe igb)
  - Fix unable to disable the offload property in rhel6u6


changelog:
  - Added SLES12SP2 support
  - Added RHEL 7.3 support

author:
  HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.7-8[rhel6u9], 5.3.5.7-1[For other OSs]


changelog:
  - Added RHEL6.10 Support.
  - Added RHEL7.5 Support.

author:
  HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.19-0[rhel6.10, rhel7u5], 5.3.5.15-7[For other OSs]


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.42
changelog:
  - This driver fixes an issue of driver crash with ethtool command.
  - This driver fixes an issue of Klocwork hits.
  - Added RHEL7u6 Support.
  - Added SLES12SP4 Support.


changelog:
  - Added RHEL6.10 Support.
  - Added RHEL7.5 Support.

author:
  HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.7-0[rhel6.10, rhel7u5], 5.3.5.1-8[For other OSs]


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.6.4-1
changelog:
  - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down
  - Fix the issue of typo in ethtool stats
  - Added RHEL7u7 Support.
  - Added RHEL8 Support.
  - Added SLES15SP1 Support.


changelog:
  - Added RHEL6.10 Support.
  - Added RHEL7.5 Support.

author:
  HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 4.3.5-0[rhel6.10, rhel7u5], 4.3.3.1-8[For other OSs]


author: HPE Linux SW Deliverables <Linux_SWdeliverables@external.groups.hpe.com> 0.13.1-1
changelog:
  - Fix return values and prints in VF MAC add/del flow
  - Fix kernel panic after transiting FW LLDP from on to off and restarting lldpad
  - Fix Throughput lower than expected.


author: HPE Linux SW Deliverables <Linux_SWdeliverables@external.groups.hpe.com> 1.6.4-1
changelog:
  - Addressing the issue of system reboot on unloading iavf driver with maxvfs enabled in switchdev mode


author: QLogic Corp <support@qlogic.com> 10.02.12.01-k1-1
changelog:
  - 10.02.12.01-k1 MR 05/29/2024
  [FCD-3465] : Server got crashed while running port toggle test.

  Resolution : During vport_delete send async_logout explicitly.
  Scope : 28XX

  - 10.02.12.00-k1 SD 05/20/2024
  -

  - 10.02.12.00.a5-k1 SD 05/07/2024
  [FCD-3970] : Crash while performing NPIV+FW reset test

  Resolution : Call sp->done inside lock
  Scope : All adapters

  [FCD-3947] : Supported speed displayed incorrectly for VPorts

  Resolution : The fc_function_template for vports did not have the
  supported_speeds field.
  Scope : All adapters

  - 10.02.12.00.a4-k1 SD 04/25/2024
  [FCD-3970] : Crash while performing NPIV+FW reset test

  Resolution : Call sp->done inside lock
  Scope : All adapters

  [FCD-3947] : Supported speed displayed incorrectly for VPorts

  Resolution : The fc_function_template for vports did not have the
  supported_speeds field.
  Scope : All adapters


  - 10.02.12.00.a3-k1 SD 03/15/2024
  [FCD-3797] : Driver installed using tarball failed to build initrd
  image after executing "./extras/build.sh initrd" command.

  Resolution : SLES15SP6 stop supporting mkinitrd command.
  Scope : ALL

  [FCD-xxx] : SFP cache on legacy adapter

  Scope : all

  - 10.02.12.00.a2-k1 SK 02/08/2024
  [FCD-3797] : Driver installed using tarball failed to build initrd
  image after executing "./extras/build.sh initrd" command.

  Resolution : SLES15SP6 stop supporting mkinitrd command.
  Scope : ALL

  [FCD-xxx] : Fix NVME + NPIV connect issue

  Resolution : Initialize irq offset
  Scope : ALL

  - 10.02.12.00.a1-k1 QT 01/09/2024
  scsi: qla2xxx: Drop redundant pci_enable_pcie_error_reporting()
  Resolution : Fix RHEL 9.4 compile issue
  Scope : ALL

  [FCD-3515] : API support for SFP data cache
  Scope : 27xx, 28xx

  [FCD-xxx] : Fix SLES15.6 compile issue
  Resolution : Remove stale fields
  Scope : ALL

  [FCD-3634] : Remove check req_sg_cnt should be equal to rsp_sg_cnt.
  Resolution : Firmware supports multiple sg_cnt for request and
  response for CT commands, so remove the redundant check.
  Scope : All Adapters

  [FCD-717] : Move FCE Trace buffer allocation to user control
  Resolution : Modify existing DFS knob to allow user to enable|disable this feature.
  Scope : Any

  [FCD-xxx] : Remove del_work work from qla_schedule_sess_for_deletion.
  Resolution : Remove del_work work from qla_schedule_sess_for_deletion.
  Scope : All

  [FCD-xxx] : Additional target mode code cleanup.
  Resolution : Additional target mode code cleanup.
  Scope : All

  [FCD-xxx] : Update copyright information.
  Resolution : Update copyright information.
  Scope : All

  [FCD-xxx] : Remove target code from qla_target files.
  Resolution : Remove target code from qla_target files.
  Scope : All

  [FCD-xxx] : Remove target mode code from initiator specific files.
  Resolution : Remove target mode code from initiator specific files.
  Scope : All

  [FCD-xxx] : Move common code to initiator specific files.
  Resolution : Move common code to initiator specific files.
  Scope : All

  [FCD-3751] : Fix use after free on unload
  Resolution : Remove duplicate signals on freeing dpc_thread
  Scope : ALL

  [FCD-3515] : Caching SFP data
  Scope : 27xx, 28xx

  [FCD-xxx] : Exec FW with delay
  Resolution : Add delay before command retry
  Scope : 28xx

  [FCD-xxx] : fix abort in bsg timeout
  Resolution : Wait for bsg to return before abort exit
  Scope : ALL

  [FCD-xxx] : Use QP lock to search for bsg.
  Resolution : use correct lock to protect search
  Scope : ALL

  [FCD-xxx] : Remove SQ in queuecommand
  Resolution : Remove duplicate code.
  Scope : ALL

  [FCD-xxx] : Reduce fabric scan duplicate code.
  Resolution : Consolidate routines that handle GPNFT & GNNFT.
  Scope : ALL

  [FCP-743] : Remove ql2xstay_attach_on_load_failure
  Resolution : Remove driver parameter used as part of feature test.
  Scope : 27xx, 28xx


  - 10.02.11.00-k1 NJ 10/25/2023
  [FCD-xxx] : Remove PCI ID 0x2971
  Resolution : Remove PCI ID 0x2971
  Scope :

  [FCD-3661] : Remove 8031 from deprecate and unmaintained list.
  Resolution : Remove 8031 from deprecate and unmaintained list.
  Scope : 8031

  [FCD-3571] : Unable to resume FW dump collection
  Resolution : send notification to udev
  Scope : 27xx, 28xx

  [FCD-3631] : Convert Port disable state to maintenance mode
  Resolution : Rename state and turn flag indicator
  Scope : 27xx + 28xx

  - 10.02.11.00.a8-k1 NJ 10/13/2023
  [FCD-3632] : Remove support for FCoE device ids.
  Resolution : Remove FCoE ids from pci table.
  Scope : 8xxx

  [FCD-3624] : Fix optrom version displayed in FDMI
  Resolution : Populate EFI version
  Scope : Series Adapters

  [FCD-3632] : Remove CNA reference from README.
  Resolution : Remove CNA reference from README.
  Scope : 8xxx

  - 10.02.11.00.a7-k1 NJ 09/22/2023

  [FCD-3195] : Fix flash read failure
  Resolution : Check return code for each flash read.
  Scope : Series Adapters

  [FCD-3571] : System flood by fw dumps
  Resolution : udev script to pause fw dump collection
  Scope : Any

  [FCD-3566] : Limit FW dump improvement to 27xx + 28xx
  Resolution : Add filter for 27xx + 28xx adapters
  Scope : 27xx+

  [FCD-3497] : Return ENOBUFS if sg_cnt is more than one for ELS cmds.
  Resolution : This error is because FW support single sg element for
  ELS Pass-through IOCB (0x53h). This particular error
  code will help API and Apps to display appropriate
  message to the user.
  Scope : All Adapters

  [FCD-3510] : RHEL & SLES OOB driver request: deprecate L8/Hilda HW
  Resolution : Added a frame work to display the message based on device and OS.
  Scope : L8 and L16 (Hilda and CNA)

  [FCD-3269] : Init Control Block is dereferenced incorrectly
  Resolution : Correctly dereference ICB
  Scope : 20xx

  [FCD-3421] : Add Support to collect fw_dump on system crash or panic.
  Resolution : Add Support to collect fw_dump on system crash or panic
  Scope : 27xx, 28xx

  - 10.02.11.00.a6-k1 MR 09/08/2023

  [FCD-XXX] : Modify error code handling for sfp fw upgrade mbx.
  Resolution : Modify error code handling for sfp fw upgrade mbx.
  Scope : 28xx

  [FCD-XXX] : Block sysfs resets and fw_dump during sfp fw upgrade
  Resolution : Block sysfs resets and fw_dump during sfp fw upgrade
  Scope : 28xx

  [FCP-743] : Block sysfs access during maintenance mode
  Resolution : Add check for maintenance mode.
  Scope : Any

  [FCD-3506] : Fix double free of dsd_list during driver load.
  Resolution : add pointer check before access
  Scope : Any

  - 10.02.11.00.a5-k1 MR 08/18/2023

  [RH BZ 2039422] : NVMe-FC kernel crash during reload driver test
  Resolution : validate nvme_local_port correctly
  Scope : Any

  [FCD-XXX] : Fix for potential Null pointer dereferenced
  Resolution : Check before dereferencing pointer
  Scope : Any

  [FCP-743] : Enable driver attach to bad HW
  Resolution : turn on ql2xstay_attach_on_load_failure option
  Scope : 27xx, 28xx

  - 10.02.11.00.a4-k1 MR 08/11/2023

  [FCD-xxx] : Update README file for zio information
  Resolution : Update readme file with zio information
  Scope : Any

  [FCD-3415] : Std-DIF is not working with HPe K1 driver
  Resolution : Reset the protect bit in the INQ response
  only when pDIF is enabled and negotiated.
  Scope : 26xx/27xx/28xx

  - 10.02.11.00.a3-k1 AG 08/03/2023

  [FCP-743] : Allow only selective BSG requests in maintenance mode
  Resolution : Allow certain BSG to go through during maintenance mode
  Scope : Any

  [FCP-743] : FW dump improvement
  Resolution : Improve data capture
  Scope : 27XX, 28XX

  [FCD-3252] : Unable to act on RSCN for port online.
  Resolution : Clear RSCN flag only when driver is acting on the notification
  Scope : Any

  [FCD-xxx] : 32 Bytes CDB
  Resolution : Use Type 6 IOCB for CDB bigger than 16Bytes
  Scope : Any

  Unit Test : i) force IO to use Type6 only for over the weekend run.
  ii) force error path(s) to make sure no crash.

  [FCD-xxx] : Move resource to allow code reuse.
  Resolution : relocate dsd_list to qpair
  Scope : Any

  - 10.02.11.00.a2-k1 AG 07/27/2023

  [FCD-3411] : CS_DMA Error observed while running DIF IO
  Resolution : While running DIF enabled IO, a CS_DMA error was observed.
  A FW dump is needed to better debug this. So take a FW dump
  on encountering this.
  Scope : 27xx/288 series of adapters

  [FCD-3406] : Modifiy default zio threshold value.
  Resolution : Modifiy default zio threshold value.
  Scope : 27xx/28xx Series Adapters

  [FCD-3314] : Delay IO Abort on PCI error
  Resolution : On detection of PCI error, allow IO's to wind down.
  Scope : Any

  [FCD-3314] : Fix system crash due to bad pointer access
  Resolution : Check SRB type before access.
  Scope : 27xx+

  - 10.02.11.00.a1-k1 AG 07/14/2023

  - FCP-749: qla2xxx: Add support for build for RH 9.3 and RH 8.9 distro
  Resolution : Build on RH 9.3 was failing owing to change of definition
  of fc_host_fpin_rcv and removal of DID_TARGET_FAILURE. Fix part of it
  by updating to latest upstream code.
  Scope : 27xx/28xx series of adapters


  - FCD-3302 : During unload Error detected messages is seen.

  Resolution : Change the wording of the message as its not an error.
  Scope : Series Adapters

  - FCD-3293 : Initiator sever getting crashed after LOGO.

  Resolution : Fix double free of fcport
  Scope : Any

  - Revert "scsi: qla2xxx: Change default ZIO threshold."

  This reverts commit 8812bcc1b7a25494ec8755ff3b61412a9993ff5b.
  The ZIO threshold now is 64.

  - FCD-xxx : Fix unreachable code

  Resolution : Remove dead code
  Scope : 28xx+

  - FCD-3232 : Potential risk of double free pointer detected in Coverity scan by ran by Citrix

  Resolution : NULL the pointer after first free.
  Scope : All

  - 10.02.10.00-k1 SK 06/14/2023
  Non-alpha build

  - 10.02.10.00.a2-k1 BH 05/12/2023

  - FCD-3140: qla2xxx: Fix command flush on cable pull.
  Changes: Add wait for commands to return.

  - FCD-XXX: qla2xxx: NVME|FCP prefer flag not being honored.
  Changes: Reread prefer flag on chip reset

  - FCD-XXX: qla2xxx: Update readme file

  - 10.02.10.00.a1-k1 BH 05/02/2023
  - FCD-XXX: qla2xxx: Update Copyright
  Changes: Update Copyright for Marvell.

  - FCD-XXX: qla2xxx: Update manufacturer detail
  Changes: Update manufacturer detail to "Marvell"

  - FCD-3140: qla2xxx: Host crash during StressAndHostPortReset test
  Changes: Remove unused nvme_ls_waitq wait queue.

  - FCD-XXX: qla2xxx: [RH-BZ 2167274]: Wait for io return on terminate rport.
  Changes: dd wait to terminate_rport_io

  - 10.02.09.00.a11-k1 BH 03/27/2023
  - FCD-XXX: qla2xxx: Add link down + logo rx stat counts
  Changes: Add counters to track link down and Logo receive.

  - 10.02.09.00.a10-k1 BH 03/17/2023
  - FCD-XXX: qla2xxx: Support for update SFP firmware of ACCELINK
  Changes: [New Feature] Support for update SFP FW of ACCELINK WTD 64G

  - FCD-717: qla2xxx: Split FCE|EFT trace control
  Changes: Split buffer alloc and enable of feature into individual step.

  - BZ-2093878: qla2xxx: perform lockless command completion in abort path
  Changes: Perform lockless command completion in abort path

  - 10.02.09.00.a9-k1 BH 03/06/2023
  - FCD-2390: qla2xxx: Fix N2N stuck connection.
  Changes: Clear the blocking flag.

  - FCD-2496: qla2xxx: Prevent command send on chip reset
  Changes: Check for chip reset before sending IOCB.

  - FCD-2035: qla2xxx: Fix mem access after free.
  Changes: Remove access of memory

  - FCD-2720: qla2xxx: Move cmd_to_req_q latency counter before processing response.
  - FCD-XXX: qla2xxx: Update readme file for current program

  - 10.02.09.00.a8-k1 BH 02/27/2023
  - FCD-2585: qla2xxx: Remove unsupported ql2xenabledif option.
  Changes: Removed unsupported ql2xenabledif=1 option and validate the user input.

  - FCD-2305: qla2xxx: Error code did not return to upper layer
  Changes: Preserve error code from TMF and return it to upper layer.

  - FCD-2035: qla2xxx: fix inconsistent TMF timeout.
  Changes: Allow TMF error to return to upper layer without session tear down.

  - FCD-2035: qla2xxx: Fix TMF leak through.
  Changes: Check for chip reset or session change before sending Task management.

  - 10.02.09.00.a7-k1 BH 02/17/2023
  - FCD-2858: qla2xxx: USCM: Check for vp_idx before setting EDC and RDF set flags.
  Changes: Add check for vp_idx before setting EDC and RDF set flags when processing RIDA.

  Revert patch:
  - FCD-2858: qla2xxx: USCM: Remove EDC and RDF set flags on Report ID Acquisition.

  - 10.02.09.00.a6-k1 BH 02/13/2023
  - FCD-2750: qla2xxx: IO's are failing on Standard DIF enabled 3PAR LUN
  Changes: Revert an offending patch and work on an issue with upstream.

  - 10.02.09.00.a5-k1 BH 02/06/2023
  - FCD-2858: qla2xxx: USCM: Remove EDC and RDF set flags on Report ID Acquisition
  Changes: Remove EDC and RDF set flags on Report ID Acquisition.

  - FCD-2879: qla2xxx: Compilation errors on SLES15SP5 Beta3-202301
  Changes: Write generic code to find tag of scsi cmnd

  - FCD-2846: qla2xxx: Correct bsg_reply size in bsg interface
  Changes: Fix the bsg_job->reply_len with size of "struct fc_bsg_reply"

  - FCD-XXXX: qla2xxx: KW: unreachable code
  Changes: Remove the invariant expression in the condition

  - FCD-XXXX: qla2xxx: KW: unreachable code
  Changes: Remove the expression flogi_acc_pld_remaining == 0

  - FCD-XXXX: qla2xxx: Changes of logs level for SFP temperature monitoring

  - 10.02.09.00.a4-k1 BH 01/29/2023
  - FCD-2308: qla2xxx: Add bsg call to read port information
  Changes: Add bsg interface to allow app to read remote port information.

  - FCD-XXX: qla2xxx: KW-97439: unreachable code
  Changes: Return void if return value is not needed

  - FCD-XXX: qla2xxx: Add logs for SFP temperature monitoring
  Changes: Add debug log for Temperature Alert (8070h) Asynchronous Event

  - 10.02.09.00.a3-k1 BH 01/19/2023
  - FCD-XXX: qla2xxx: Add support of RHEL9.2
  - FCD-XXX: qla2xxx: Add support of RHEL8.8
  - FCD-XXX: qla2xxx: Add support of SLES15 SP5
  - FCD-2800: qla2xxx: Add support of OpenEuler-22.03

  - 10.02.09.00.a2-k1 BH 01/10/2023
  - FCD-XXX: qla2xxx: kw: unreachable code, SRB type is 0 just before latency counter incremented.
  Changes: SRB type is 0 just before latency counter incremented.

  - FCD-XXX: qla2xxx: kw: reset current_topology much later
  Changes: Reset current_topology much later on detecting

  - FCD-XXX: qla2xxx: kw: unreachable code, CS_COMPLETE is 0 and its already checked.
  Changes: Remove unreachable

  - FCD-XXX: qla2xxx: kw: Checking for port_state always yields zero
  Changes: Instead of bitwise AND check for port_state directly

  - FCD-1569: qla2xxx: Fix fw resource tracking
  Changes: Use global counter

  - FCD-XXX: qla2xxx: [ER-144639]: Flush mailbox commands on chip reset
  Changes: Use lock to prevent race condition.

  - FCD-2735: qla2xxx: USCM-VL: NVRAM VL disabled logins with extend FLOGI (VL enabled)
  Changes: Reset the spl. features control block flag to avoid logging in with ER_RDY.

  - FCD-XXX: qla2xxx: klockwork: Fix buffer over flow
  Changes: Use correct buffer size.

  - FCD-XXX: qla2xxx: EDIF: kw: remove unnecessary bit field
  - FCD-2563: qla2xxx: Turn off noisy message log.
  - FCD-XXX: qla2xxx: kw: remove dead code in qla24xx_config_rings

  - 10.02.09.00.a1-k1 BH 01/10/2023
  - FCD-717: qla2xxx: allow FW dump extraction if load fail
  Changes: Add knob to force driver to stay attached to the fail adapter.

  - FCD-717: qla2xxx: Initialize FW buffer size with seed value
  Changes: Initialize FW Buffer size with seed value

  - FCD-XXX: qla2xxx: klockwork: Remove QLA_COMMAND_ERROR check in qla2x00_execute_fw.
  Changes: Remove the unnecessary QLA_COMMAND_ERROR check

  - FCD-2390: qla2xxx: Fix session hang in gnl
  Changes: Clear this flag to prevent blockage.

  - FCD-2390: qla2xxx: Fix erroneous link up failure
  Changes: Set fw_started flag early to prevent interrupts being dropped

  - FCD-2496: qla2xxx: Fix command flush during TMF
  Changes: Wait for commands flush before closing TMF

  - FCD-2035: qla2xxx: Limit TMF to 8 per function
  Changes: Limit TMF to 8 per function

  - FCD-XXX: qla2xxx: Add NVMe Disconnect support.
  Changes: Add support for NVMe Disconnect feature.

  - FCD-XXX: qla2xxx: Modify qla27xx_copy_fpin_pkt to support PURLS IOCB.
  Changes: Modified qla27xx_copy_fpin_pkt to support both PUREX and PURLS IOCBs.

  - FCD-717: qla2xxx: Adjust iocb resource on qpair create
  Changes: Add call to readjust iocb + exchange limit.

  - FCD-2390: qla2xxx: Fix deletion race condition
  Changes: Move check field behind lock

  - FCD-XXX: qla2xxx: klockwork: Pointer checked for NULL at linx x will be dereferenced at linx x+y.
  Changes: Remove the unnecessary Null check. The pointer will likely be valid.

  - FCD-XXX: qla2xxx: Observed call trace in smp_processor_id() with debug kernel
  Changes: Use raw_smp_processor_id API

  - FCD-2275: qla2xxx: USCM: Cleanup code related to IOPS based throttling
  Changes: IOPS and BW based throttling is not used. Remove those code.

  - FCD-2273: qla2xxx: USCM: Code cleanup w.r.t module params (ql2x_scmr_flow_ctl_tgt, ql2x_scmr_flow_ctl_host)
  Changes: Remove the redundant module parameters

  - FCD-2408: qla2xxx: USCM: Driver doesn't honor the adapter port Restore Default Settings
  Changes: Update the nvram values to the host as well as fcport

  - FCD-2363: qla2xxx: USCM: Slow Queue usage changes
  Changes: Use Slow queue only under specific scenarios

  - FCD-XXX: qla2xxx: Don't increment interface err cnt in SS_RESIDUAL_UNDER case.
  Changes: Don't increment the counter for under-run.

  - FCD-2291: qla2xxx: Erroneous link down.
  Changes: Allow adapter reset to complete before discovery

  - FCD-2035: qla2xxx: Fix hang in task management
  Changes: Bail out of TMF on error

  - FCD-XXX: qla2xxx: Reduce memory usage during low IO.
  Changes: Free the extra buffers as traffic is reduced

  - FCD-2212: qla2xxx: USCM: Observed call trace during the rmmod qla2xxx module
  Changes: Free srb when throttle down I/O in NVME path

  - FCD-XXX: qla2xxx: USCM: Debug log message improvement
  Changes: Log target WWPN for peer congestion

  - FCD-2164: qla2xxx: Fix stall session after app start
  Changes: Use session delete to avoid the accidental clearing of scan_flag

  - FCD-2185: qla2xxx: USCM: Peer congestion throttling functionality doesn't honor the ISP reset/port toggle
  Changes: Clear the fcport throttling state on an ISP reset

  - FCD-2194: qla2xxx: USCM: VL - Mailbox cmd failure during port toggle
  Changes: Check fcport state before invoking the mailbox

  - FCD-XXX: qla2xxx: USCM: VL - Enhance BW throttle to account for perf. drop while using VL
  Changes: Set throughput baseline on 1st FPIN

  - FCD-2096: qla2xxx: USCM: VL - PUN not incremented on PCN FPIN
  Changes: Fix parsing the fpin when multiple descriptors are present

  - FCD-XXX: qla2xxx: USCM: VL, Cache priority values from FLOGI_ACC
  Changes: Use priority values cached from FLOGI_ACC, when there is no PUN

  - FCD-XXX: qla2xxx: USCM: Limit throttling down based on throughput
  Changes: Limit throttling down based on throughput

  - FCD-XXX: qla2xxx: Fix for KW-97392
  Changes :Validate rport before dereferencing

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..15
  Changes: Correct the index of array

  - FCD-XXX: qla2xxx: Remove dead code - flagged by klocwork
  - FCD-847: qla2xxx: fixup: Fix exchange over subscription.
  - FCD-2434: qla2xxx: Fix crash when IO abort times out
  - FCD-XXX: qla2xxx: Rearrange scm rx path handling code.

  - 10.02.08.01-k1 BH 09/28/2022
  - FCD-2392: Fix initrd image creation failure in OpenEuler, Kylin and UOS
  Changes: Add support for creating initrd image on openEuler, Kylin and UOS

  - 10.02.08.00-k1 BH 09/16/2022
  - FCD-XXX: qla2xxx: Don't increment interface err cnt in SS_RESIDUAL_UNDER case.
  Changes: Residual under-run is not an interface error, hence no need to increment that count.

  - FCD-2291: qla2xxx: Fix erroneous link down.
  Changes: Allow adapter reset to complete before any scan can start.

  - FCD-2035: qla2xxx: Fix hang in task management
  Changes: Add additional error check at various point

  - FCD-XXX: qla2xxx: Reduce memory usage during low IO.
  Changes: Free the extra buffers as traffic is reduced.

  - 10.02.08.00.a7-k1 BH 08/22/2022
  - FCD-2212: qla2xxx: USCM: Observed call trace during the rmmod qla2xxx module
  Changes: Free srb when throttle down I/O in NVME path.

  - FCD-2164: qla2xxx: USCM: Fix stall session after app start
  Changes: Prevent accidental clearing of flag that blocks re-login

  - FCD-2185: qla2xxx: USCM: Peer congestion throttling functionality doesn't honor the ISP reset/port toggle
  Changes: Clear the fcport throttling state on an ISP reset.

  - FCD-2194: qla2xxx: USCM: VL - Mailbox cmd failure during port toggle
  Changes: Heck fcport state before invoking mailbox

  - FCDXXX: qla2xxx: USCM: Debug log message improvement

  - 10.02.08.00.a6-k1 BH 08/09/2022
  - FCDXXX: qla2xxx: USCM: VL - Enhance BW throttle to account for perf. drop while using VL
  Changes: if VL switchreduces the throughput below 50%, we would not throttle any further.

  - FCD-2096: qla2xxx: USCM: VL - PUN not incremented on PCN FPIN
  Changes: Fix the FPIN parsing to take into account multiple descriptors.

  - FCDXXX: qla2xxx: USCM: VL, Cache priority values from FLOGI_ACC
  Changes: Use priority values cached from FLOGI_ACC, when there is no PUN

  - FCDXXX: qla2xxx: USCM:Limit throttling down based on throughput
  Changes: Limit throttling down based on throughput

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..10

  - 10.02.08.00.a5-k1 BH 07/29/2022
  - FCD-XXX: qla2xxx: klocwork: Possible Null Pointer Dereference
  Changes: Validate rport before dereferencing

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..15
  Changes: Correct the index of array

  - FCD-XXX: qla2xxx: USCM: Fix mqueuecommand return code during throttle down request.

  - FCD-XXX: qla2xxx: Revert klockwork: Fix buffer overrun

  - FCD-2035: qla2xxx: Fix task mgmt cmd fail with status 30h
  - FCD-2035: qla2xxx: Fix Task Mgmt Cmd fail due to unavailable resource
  Changes: Limit TM commands to 8 per target.

  - 10.02.08.00.a4-k1 BH 07/23/2022
  - FCD-847: qla2xxx: Fix exchange over subscription.
  Changes: check for exchange availability before command submission

  - FCD-XXX: qla2xxx: Remove unintended flag clearing
  Changes: Remove unintended flag clearing.

  - FCD-2035: qla2xxx: Fix task mgmt cmd fail with status 30h
  Changes: Add wait for completion of Marker!

  - FCD-XXX: Fix performance dip due to lock contention
  Changes: Save the allocated memory for reuse and avoid the lock

  - FCDXXX: qla2xxx: USCM: Do not send EDC and RDF for NPIV ports
  Changes: Disable sending USCM ELS for vports

  - FCDXXX: qla2xxx: USCM: VL: Do not set target speed to 1G for slow lane
  Changes: Do not set the target speed while changing lanes.

  - FCD-2012: qla2xxx: Throttling up messages seen when profile is changed
  Changes: Set the new profile for each fcport (along with the host).

  - FCD-XXX: qla2xxx: USCM: VL - Clean up FLOGI_ACC parsing
  Changes: structure that could be used to parse the FLOGI_ACC by using offsets

  - FCD-1990: qla2xxx: Fix nvram load config error
  Changes: Remove re-definition of port flags while enabling virtual lane support

  - FCD-XXX: qla2xxx: USCM:VL, I/O does not move back to the normal lane
  Changes: Check if I/O throttling is being done, before deciding to move the normal lane.

  - FCD-XXX: qla2xxx: Fix stall login
  Changes: Reset session state to allow relogin logic to re-drive the connection.

  - FCD-847: qla2xxx: Fix exchange over subscription for mgt cmd.
  Changes: would check for exchange availability before command submission.

  - FCD-847: qla2xxx: Fix exchange over subscription.
  Changes: would check for exchange availability before command submission.

  - FCD-XXX: qla2xxx: relocate/rename vp map.
  - FCD-XXX: qla2xxx: Klocwork: Fix for Unexpected type of a scan function parameter

  - 10.02.08.00.a3-k1 BH 07/01/2022
  - FCD-1818: qla2xxx: Fix call trace in debug kernel due to missing spinlock init
  Changes: Fix the call trace by initializing trace lock.

  - FCD-1923: qla2xxx: USCM: VL - After disabling VL via CLI, status shows "Non-operational"
  Changes: Return VL status appropropriately

  - FCD-1922: qla2xxx: Fix discovery issues in FC-AL topology
  Changes: Checks FC loop map when Get ID list returns no device

  - FCD-1831: qla2xxx: Fix link failure in NIPV environment.
  Changes: Remove NPIV host from directly being able to chip reset.

  - FCD-XXX: qla2xxx: Fix DMA-API call trace on NVME LS requests with debug kernel
  Changes: Remove DMA mapping from the driver

  - FCD-XXX: qla2xxx: Fix KASAN use-after-free warning in qla24xx_sp_unmap
  Changes: Remove stale fcport access in qla2x00_rel_sp

  - FCD-XXX: qla2xxx: Fix KASAN out-of-bounds warning in qla_update_sp
  Changes: Size for memcpy was corrected to use the right length.

  - FCD-XXX: qla2xxx: Fix imbalance vha->vref_count
  Chnages: Add an extra ref count for the task management paths.

  - FCD-XXX: qla2xxx: Tweak Latency measurement
  Changes: Move the time read further ahead to the start of queuecommand and
  later to the point where it is just before scsi_done.

  - FCD-XXX: qla2xxx: klockwork: Silent superfluous warning.
  Changes: Remove superfluous Null check.

  - FCD-XXX: qla2xxx: klockwork: Fix buffer overrun
  Changes: Replace structure name to allow proper size calculation

  - FCD-XXX: qla2xxx: Remove dead code (GNN ID).
  Changes: Remove stale/unused code.

  - FCD-XXX: qla2xxx: Remove dead code (GPNID).
  Changes: Remove stale/unused code.

  - FCD-XXX: qla2xxx: Remove dead code.
  Changes: Removing drport field and FCPORT_UPDATE_NEEDED, and EDIF_TICK_NEEDED signals

  - FCD-XXX: qla2xxx: Do not select slow queue if USCM is enabled
  Changes: Do not select slow queue whilie initializing cpu map

  - FCD-XXX: Select HW queue depending on Tx CPU
  Changes: Select qpair which is in correlation with Tx CPU

  - FCD-XXX: qla2xxx: Add support for displaying I/O throttle information
  Changes: Display the driver I/O throttle information along with VL information

  - FCD-XXX: qla2xxx: USCM: Throttle only R/W commands for NVME
  Changes: Throttle only read/write IOs.

  - Bring back following reverted changes:
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.


  - 10.02.08.00.a2-k1 BH 06/19/2022
  - FCD-XXX: qla2xxx: klockwork - Check valid rport returned by fc_bsg_to_rport
  Changes: Check valid rport returned by fc_bsg_to_rport

  - FCD-XXX: qla2xxx: klockwork - Check for a valid fcport pointer
  Changes: Add a check for a valid fcport pointer at the time of exit

  - FCD-XXX: qla2xxx: klockwork - Move fcport NULL check to avoid dereference
  Changes: Move the fcport NULL check to avoid the dereference.

  - FCD-1883: qla2xxx: USCM: Adapter shows "RDF Complete" when Link is down
  Changes: Reset the flag, so that when USCM is negotiated, the CLI shows the correct status

  - FCD-1846: qla2xxx: USCM: A log message while clearing stats
  Changes: Add a log message while clearing USCM stats

  - FCD-XXX: qla2xxx: USCM: VL-Reset FC device virtual lane priority to normal on a port flap
  Changes: Reset the virtual lane to normal on a port flap, ISP reset

  - FCD-XXX: qla2xxx: USCM: VL-Set target congestion before switching lanes
  Changes: Set the target state before the lane switch.

  - FCD-1752: qla2xxx: USCM: VL-Sysfs does not show Virtual Lane as enabled
  Changes: extended flogi_acc can also be parsed correctly.

  - FCD-1652: qla2xxx: Check if port is online before sending ELS
  Changes: Check if port is online before sending ELS

  - FCD-XXX: scsi: qla2xxx: Synchronize rport dev_loss_tmo setting

  - 10.02.08.00.a1-k1 BH 05/27/2022
  - FCD-XXX: qla2xxx: USCM: Virtual Lane, Fix PUN handling
  Changes: Have a default priority range for each lane and ensure that the range is programmed correctly

  - FCD-XXX: qla2xxx: USCM: Support for Virtual Lanes
  Changes: Enable Virtual Lane support for Cisco switch

  - 10.02.07.00-k1 BH 05/27/2022
  - Non-alpha build

  - 10.02.07.00.a19-k1 BH 05/21/2022
  - FCD-XXX : qla2xxx: USCM: Throttling is not honored for NVMe
  Changes: Enable NVMe READ/WRITE commands to be throttled

  - FCD-XXX: qla2xxx: USCM: Add counters to track directional throttling
  Changes: Add sysfs counters to have stats displayed for busy status returns.

  - FCD-1801: qla2xxx: USCM: CP reads go to zero while doing directional throttling
  Changes: Take into account the directional queue depth while returning a busy status to the stack.

  - FCD-1809: qla2xxx: USCM: Restoring USCM Profile to default result in driver

  - FCD-1798: qla2xxx: USCM: Profiles are not honored for peer congestion
  Chnages: Apply the profile to each target (fcport) when the profile is changed.

  Reverting the following changes:
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.

  - 10.02.07.00.a18-k1 BH 05/12/2022
  - FCD-1484: qla2xxx: Manufacturer details should be "Marvell Semiconductor, Inc."
  Changes: Update Manufacturer details to indicate Marvell Semiconductors

  - FCD-XXX: qla2xxx: USCM: Throttle only read and write commands
  Changes: Throttle only read and write commands.

  - FCD-XXX: qla2xxx: USCM: Do not clear throttle for Clear Cong FPIN.
  Changes: Do not clear throttle when Clear Congestion FPIN is received.

  - FCD-XXX: qla2xxx: USCM: Change default profile to Monitor
  Changes: Set the default throttle profile as Monitor.

  - FCD-XXX: qla2xxx: Fix few issues reported by klocwork tool

  - 10.02.07.00.a17-k1 BH 05/06/2022
  - FCD-1522: qla2xxx: USCM: Throughput drops to zero in Monitor mode
  Changes: Restore qdepth based on monitor mode

  - FCD-1315: qla2xxx: Fix erroneous mailbox timeout after pci error inject.
  Changes: Clear wait for MB interrupt flag to prevent stale MB completion arriving

  - FCD-1424: Remove verbose IO debug messages
  Changes: Remove the IOCB debug messages for every IO

  - FCD-XXX: Support for NVMe parameters in Auxiliary Image Status
  Changes: Added new structure member, bit define and image status check.

  - 10.02.07.00.a16-k1 BH 04/08/2022
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.

  - FCD-1221: qla2xxx: USCM: Switch does not send FPINs after a EDC re-negotiation
  Changes: Send Link Service Request Information wih the EDC response, along with the other descriptors.

  - 10.02.07.00.a15-k1 BH 03/25/2022
  - FCD-1249: qla2xxx: edif: Fix dropped IKE message.
  Changes: Fixes IKE message being dropped due to error in
  processing Purex IOCB and Continuation IOCBs.

  - FCD-1457: qla2xxx: Zero undefined mailbox IN registers
  Changes: Set zero to unuse register's value while requesting a new MB command.

  - FCD-1425: qla2xxx: USCM: Seconds since last event showing incorrect value
  Changes: Calculate delta time correctly

  - FCD-1287: qla2xxx: Fix incorrect display of max frame size.
  Changes: Save off the field of interest into separate location and convert into words.

  - FCD-XXX: qla2xxx: Fix memory leak when reading tgt_port_database debugfs file
  - FCD-XXX: qla2xxx: USCM: Do not reset SCM stats on a link bounce/ISP reset

  - 10.02.07.00.a14-k1 BH 03/14/2022
  - FCD-XXX: qla2xxx: Fix losing FCP-2 targets on long port disable with IOs
  Changes: Fix this by accepting RSCN when the device is not online.

  - FCD-XXX: qla2xxx: Fix losing target when it reappears during delete
  Changes: Fix the issue by adding state checks before proceeding.

  - FCD-XXX: qla2xxx: Fix losing FCP-2 targets during port perturbation tests
  Changes: Fix was to ignore delete for FCP-2 devices in certain sequence.

  - FCD-119: qla2xxx: Fix crash due to stale srb access around IO timeouts
  Changes: Ensure srb is either returned during error IO timeout error escalation.
  If that is not possible fail the escalation path.

  - FCD-1132: qla2xxx: HPE3PAR: Fix IOCB resource count leak
  Changes: Decrement FW IOCB resource count.

  - FCD-1132: qla2xxx: Turn off MQ for 8G adapter.
  Changes: For 8G adapter, multi queue was enabled accidentally.

  - FCD-1385: Wind down adapter after pcie error.
  Changes: Detect the PCIE error and returns all IO's to upper layers.

  - FCD-1412: qla2xxx: Reset Congestion Warning/Alarm signals count.
  Changes: Reset signals at every signal check boundary (1 sec).

  - 10.02.07.00.a13-k1 BH 02/17/2022
  - FCD-1353: qla2xx: a12/a11 driver compilation gives warning messages
  Changes: Fix the fall through warning
  - FCD-1342: qla2xxx: SL12SP5 a12 driver compilation issue observed
  Changes: fallthrough macro is defined based on gcc version.

  - 10.02.07.00.a12-k1 BH 02/09/2022
  - FCD-XXX: qla2xxx: Reset USCM stats/state and throttling on RSCN
  Changes: Reset USCM stats on getting an RSCN indicating a target port down.

  - FCD-XXX: qla2xxx: Increase max limit of ql2xnvme_queues
  Changes: Increase max limit of ql2xnvme_queues to (max_qpair-1)

  - FCD-478: qla2xxx: Fix missing devices on a LOGO from F-Port
  Changes: A call to logo all ports is made upon a F-Port LOGO.

  - FCD-XXX: qla2xxx: Move NVMe traffic to the slow queue on target congestion
  Changes: Steer the NVMe traffic to the slow Q on encountering target congestion

  - FCD-348: qla2xxx: edif: Fix slow session tear down.
  Changes: As a work around, driver would trigger a session tear down where
  it tell the local authentication application to also tear down.

  - FCD-XXX: qla2xxx: edif: Tweak debug log.
  Changes: Print AUTH ELS header to assist in debugging session's state of authentication app.

  - FCD-207: qla2xxx: Fix stuck session of prli reject
  Changes: Remove the stale code that cause the unintentional short cut.

  - FCD-1197: qla2xxx: Throttling up is seen when port is down
  Changes: Reset the stats/congestion state and the throttling algorithm on a link down event.

  - FCD-348: qla2xxx: Reduce false trigger to login
  Changes: Reduce the extra trigger to prevent multiple login to the same session.

  - FCD-207: qla2xxx: edif : Reduce N2N thrashing at app_start time
  Changes: make sure the old session is torn down before triggering a relogin.

  - FCD-207: qla2xxx: Fix laggy FC remote port session recovery
  Changes: allows the higher priority error recovery to run first before running
  the lower priority heart beat check.

  - FCD-XXX: qla2xxx: edif: Fix no logout on delete for n2n
  Changes: Set a flag to turn on implicit logout early in the session recovery
  to make sure it would go out in case of error.

  - FCD-348: qla2xxx: edif: fix session thrash 2
  Changes: prevents prli from going out before authentication app gives the ok

  - FCD-348: qla2xxx: edif: tear down session if keys has been removed
  Changes: If all keys for a session has been deleted then trigger a session tear down.

  - FCD-348: qla2xxx: edif: fix no login after app start
  Changes: Add a re-login trigger to relogin.

  - FCD-207: qla2xxx: Fix hang due to session stuck
  Changes: Break the requeue cycle and exit. The session deletion code will trigger a session relogin.

  - FCD-348: qla2xxx: edif: reduce disruption due to multiple app start
  Changes: Driver will skip over session tear down if app start is seen more than once.

  - FCD-348: qla2xxx: edif: send logo for unexpected ike msg
  Changes: Terminate/cleanup the AUTH ELS exchange.Follow with a pass through LOGO.

  - FCD-348: qla2xxx: edif: Fix IO timeout due to over subscription
  Changes: Track IOCB resources to prevent over subscription of IOCB resources

  - FCD-207: qla2xxx: edif: fix n2n login retry for secure device
  Changes: Add a few more login retries to revive the connection.

  - FCD-1205: qla2xxx: Fix disk failure to rediscover
  Changes: Set the online state before reporting to UL of the availability of the session.

  - FCD-207: qla2xxx: Fix n2n inconsistent plogi
  Changes: Delete the session to restart the connection, where ELS pass through
  PLOGI would be used consistently.

  - FCD-1267: qla2xxx: Fix crash during module load unload test
  Changes: Driver correctly freeing a pre-allocated structure for purex packet handling

  - FCD-XXX: qla2xxx: Fix missed DMA unmap for NVME ls requests.
  Changes: Add an unmap call during ELS completion.

  - FCD-1266: qla2xxx: Fix loss of NVME namespaces after driver reload test
  Changes: Calling the localport registration under a mutex

  - FCD-1212: qla2xxx: Host does not retry RDF when retries are exhausted and there is an incoming RDF
  Changes: Reset the SCM ELS counters to zero once an RDF is received.

  - FCD-XXX: qla2xxx: Restrict CPU-qpair mapping to work for NVMe only
  - FCD-XXX: qla2xxx: Change throttle up logic to be more aggressive.
  - FCD-XXX: qla2xxx: SCM: Add a bitmap for FPIN events.

  - 10.02.07.00.a11-k1 BH 01/17/2022
  - FCD-738: Fix T10 DIF performance on high end setup
  Changes: Added high performing CRC-1 interface

  - FCD-1182: qla2xxx: Fix initrd build error on RHEL 9
  Changes: Updated the build script specific to RHEL 9

  - FCD-XXX: qla2xxx: Fix incorrect latency counter display
  Changes: Fix this by ignoring I/Os with unusually high latencies.

  - FCD-207: qla2xxx: Fix n2n discovery issue with secure target
  Changes: On app_start, driver will reset the login retry attempt count.

  - FCD-1180: qla2xxx: Use correct feature type field during rffid processing
  Changes: Driver sends RFF_ID for initiator type 28 i.e. NVMe insteads of SCSI two times

  - FCD-1159: qla2xxx: Host doesn't retry the RDF/EDC when jammed with idle/CRC
  Changes: Wake up the DPC thread from the timer context when EDC/RDF needs to be

  - FCD-XXXX: qla2xxx: Build module with "-mindirect-branch=thunk-extern" option on RHEL 9

  - 10.02.07.00.a10-k1 BH 01/06/2022
  - FCD-XXX: qla2xxx: Support for changes in kernel 5.6 and above(rhel9.0)
  Changes: Changes made specific to rhel9.0

  - FCD-1136: qla2xxx: Throttling occurs even when USCM is disabled via CLI
  Changes: Update flags that control USCM features, correctly on ISP reset

  - FCD-1160: USCM continues to be active even if RDF response is jammed (and failed)
  Changes: USCM flags are updated properly when port toggle and RDF completion happen

  - 10.02.07.00.a9-k1 BH 01/03/2022
  - FCD-1154: qla2xxx: Fix incorrect reporting of task management failure
  Changes: Corrected endianness.

  - 10.02.07.00.a8-k1 BH 12/23/2021
  - FCD-814 : qla2xxx: Add a new v2 dport diagnostic feature.
  Changes: Buffer size is increased to 1024 bytes and handle START/RESTART
  command received from SDMAPI.

  - FCD-XXX: qla2xxx: Change throttle up logic to be more aggressive.
  Changes: Ramp up to faster initially, to get closer to the sweet spot quicker.
  Be less prone to operating at lower bandwidth in case of a sudden workload spike.
  Operate more conservatively (prioritize self over the network).

  - FCD-XXX: qla2xxx: Do not track SCM stats for all ports in the zone
  Changes: Track SCM stats just for the host and the target

  - FCD-XXX: qla2xxx: Stats for FPIN with event type "Lost Credit" not incremented.
  Changes: Add incrementing of "Lost Credit" stats.

  - FCD-684: qla2xxx: Fix link down when connected to AG fabric with FAA enabled
  Changes: Remove setting PUN and VL support bits in init control block.

  - FCD-1004: qla2xxx: Debug message improvement when changing SCM profile.
  Changes: Use profile names when changing profiles

  - FCD-868: qla2xxx: lockdown: "Unsupported Firmware" message
  Changes: checked different BITs for checking lockdown feature.

  - FCD-682: qla2xxx: tcm_qla2xxx driver load fails with "Invalid argument" error
  Changes: As tcm_qla2xxx is untested/unused, make it a dummy driver
  and reduce unncessary noise created by this.

  - FCD-886: qla2xxx: Hard Lockup on Unload/Load task with serial log enabled
  Changes: Hard lockup is seen because serial console driver crashed because of
  excessive logging. It was finalized to document this as known issues.

  - FCD-XXX: qla2xxx: Apply USCM profile change immediately

  - 10.02.07.00.a7-k1 BH 11/05/2021
  - FCD-926: qla2xxx: lockdown: lower debug severity messages
  - FCD-824: qla2xxx: lower debug severity message for fw lockdown
  Changes: This patch lower the severity of various log messages.

  - FCD-XXX: qla2xxx: Send LS_ACC for an incoming RDF
  Changes: Send the LS_ACC and the new RDF separately

  - FCD-721: qla2xxx: Set Max queue depth based on data direction.
  Changes: Max q depth for Initiator tracks Reads (per port) and Fcport tracks Writes (per fcport).

  - FCD-701: qla2xxx: Fix device reconnect in loop topology
  Changes: Fix by taking the main login path that acquires device handle.

  - FCD-XXX: qla2xxx: Add ql2xnvme_queues module parameter to configure number of NVME queues


  - 10.02.07.00.a6-k1 BH 10/08/2021
  - FCD-786: Shown wrong FDMI data for 64G adaptor
  Changes: qla2xxx: Corrected transmission speed mask values for FC

  - FCD-717: add retry for exe fw
  Changes: qla2xxx: Driver will retry Exec FW command up to 4 retries

  - FCD-XXX: qla2xxx: Compile out map queue changes if present in nvme-fc

  - 10.02.07.00.a5-k1 BH 10/01/2021
  - FCD-740: Fix scheduling while atomic
  Changes: qla2xxx: schedule the call to fc_remote_port_delete in non-interrupt context

  - FCD-691: Fix premature hw access after pci error
  Changes: qla2xxx: Check error condition still persist and/or wait until the OS to give the resume signal

  - FCD-756: Fix excessive messages during device logout
  Changes: qla2xxx: disable printing IO error messages by default

  - FCD-XXX: qla2xxx: abort fw dump if soft reset fail
  - FCD-XXX: qla2xxx: USCM: Retry USCM ELS for Logical busy error code
  - FCD-XXX: qla2xxx: USCM: USCM profile reset to Driver defaults
  - FCD-XXX: qla2xxx: Fix warning message due to adisc is being flush at /var/log/messages

  - 10.02.07.00.a4-k1 BH 09/20/2021
  - FCD-721: Revert code that keeps track of queue-depth directionally.
  Reason: Observing issue while q-depth accounting

  - FCD-XXX: Cleanup stale code.
  Changes: qla2xxx: Remove unused experimental code that uses
  explicit PRLO as a way to tear down session.

  - FCD-XXX: edif: remove old doorbell interface
  Changes: qla2xxx:driver has implemented a new doorbell mechanism via bsg.

  - FCD-348: edif: add retry for els pass through
  Changes: qla2xxx: edif: Add additional retries to reduce higher level recovery.

  - FCD-XXX: edif: Synchronize NPIV deletion with authentication application
  Changes: qla2xxx: Notify authentication application of a NPIV deletion event is about to occur.

  - FCD-XXX: edif: Fix potential stuck session in sa update
  Changes: qla2xxx: Set flag properly for any attempt to relogin.

  - FCD-704: The external flag for tcm_qla2xxx was not set.
  qla2xxx: Add tcm_qla2xxx to externally supported module list.

  - 10.02.07.00.a3-k1 BH 09/08/2021
  - FCD-XXX: qla2xxx: edif: wait for app to ack on sess down
  Changes: On session deletion, wait for app to acknowledge before moving on.

  - FCD-XXX: qla2xxx: edif: fix edif bsg
  Changes: Properly fill out the reply_payload_rcv_len field.

  - FCD-XXX: qla2xxx: edif: fix inconsistent check of db_flags
  Changes: Replace value check with bit flag check.

  - FCD-XXX: qla2xxx: edif: increase ELS payload
  Changes: Adjust memory buffer size to be able to handle max ELS payload.

  - FCD-343: qla2xxx: turn off target reset during issue_lip
  Changes: driver sends additional target reset to remote device before resetting the link.

  - FCD-XXX: qla2xxx: edif: Reduce Initiator-Initiator thrashing.
  Changes: Reduce unnecessary stress for authentication application to deal with unused connections.

  - FCD-XXX: qla2xxx: fix gnl list corruption
  Changes: move lock deletion behind lock.

  - FCD-XXX: qla2xxx: edif: flush stale events and msgs on session down
  Changes: Prevents authentication application from having to process stale data.

  - FCD-XXX: qla2xxx: edif: reduces thrashing of the connection.
  - FCD-XXX: qla2xxx: edif: tweak trace message
  - FCD-XXX: qla2xxx: edif: fix app start delay
  - FCD-XXX: qla2xxx: USCM: Handle SCM ELS from switch
  - FCD-XXX: qla2xxx: edif: fix app start fail

  - 10.02.07.00.a2-k1 BH 09/02/2021
  - FCD-156: qla2xxx: 3PAR: Fix out of bound mem access
  Changes: Add additional check to make sure the range of memory

  - FCD-624: qla2xxx: Source driver gives compilation error on RHEL8.5
  Changes: Offending code on tcm_qla2xxx module has been removed

  - FCD-xxx: qla2xxx: Fix use after free
  Changes: Would check for command is aborted / completed by FW before exiting the call.

  - ER148553: qla2xxx: relogin during fabric disturbance
  Changes : Set the scan_need flag to indicate a session

  - FCD-464: qla2xxx: Fix race between timeout handler and completion handler
  Changes: One reference is taken for the normal code path and one for the timeout path

  - FCD-453: Fix FC-NVME register localport failure.
  Changes: Module initialization is added to nvme_fc_port_template

  - FCD-XXX: qla2xxx: Process responses in Tx path if any available for better performance
  Changes: Call process_response_queue() in Tx path

  - FCD-492: Kernel crashes when accessing port_speed sysfs file
  Changes: CNA: Fix this by changing the lookup.

  - FCD-XXX: qla2xxx: Refactor asynchronous command initialization
  - FCD-XXX: qla2xxx: USCM - Add profile support for throttling IO
  - FCD-XXX: qla2xxx: Move heart beat handling from dpc thread to workqueue
  - FCD-XXX: USCM: Enhancement to throttle only read traffic during host congestion
  and write traffic during target congestion.

  - 10.02.07.00.a1-k1 BH 08/22/2021

  - FCD-124: qla2xxx: edif: Use link event to wake up app
  Changes: The link up event would notify app of the present of a new SCSI Host.

  - FCD-299: qla2xxx: Fix crash in NVME abort path
  Changes: Fixed the issue by removing stale access.

  - FCD-XXX: qla2xxx: Display 16G only as supported speeds for 3830c card.
  Changes: This card doesn't support lower speeds, hence,
  update the fdmi and sysfs fields to display 16G only.

  - FCD-226: qla2xxx: Update details for building kdump initrd in NVMe BFS.
  Changes: Currently inbox driver doesn't support kdump/kexec kernel,
  hence user need to update kdump initrd to have OOB driver part of it.

  - FCD-372: qla2xxx: Anomaly in the congestion stats
  Changes: Clear the signal counter on a qaucli clear

  - FCD-279: Request QCC to check/report adapter's MCTP state
  Changes: qla2xxx: Add support for mailbox passthru

  - FCD-XXX: Perf improvement: Pick qpair such that Tx and Rx are processed on same CPU.
  Changes: qla2xxx: Select qpair depending on which CPU post_cmd() gets called

  - FCD-XXX: scsi: qla2xxx: Reserve extra IRQ vectors

  - 10.02.06.02-k1 BH 08/11/2021
  - FCD-511: Path does not go into "Marginal" state on receiving FPIN-LI
  Change: qla2xxx: Pass the LI events to the scsi_transport_fc

  - 10.02.06.01-k1 BH 07/27/2021
  - ERXXXXXX: qla2xxx: Check for firmware capability before creating QPair.
  Change: Move the check for FW attributes to right location. This check
  is specific for ISP25XX.

  - 10.02.06.00-k1 BH 07/21/2021
  - ERXXXXXX: qla2xxx: Version number is changed from 10.02.06.00.a1-k1
  to 10.02.06.00-k1

  - 10.02.06.00.a1-k1 BH 06/29/2021
  - FCD-297: Fix NVME session down detection
  Change: qla2xxx: Session tear down and allow relogin to re-drive
  the connection under condition

  - ER148553/FCD-156: Fix NVME retry
  Change: qla2xxx: Alternate back and forth on every PRLI failure
  until login retry count has depleted or it is succeeded.

  - FCD-316: System crash when number of CPUs forced to 2
  - Change: qla2xxx: Sync queue idx with queue_pair_map idx.
  This fix needs both commits released on 10.02.05.00-k
  and 10.02.06.00.a1-k against FCD-316

  - ERXXXXXX: qla2xxx: Readme: Update OS details that supports NVMe BFS.
  - ERXXXXXX: qla2xxx: Readme: Remove workaround of forcing of INTa
  mode for kdump kernel.

  - ERXXXXXX: qla2xxx: Readme: Update OS details that supports NVMe BFS.


  - FCD-316: System crash when number of CPUs forced to 2
  Changes : qla2xxx: prevents unbalanced QP allocation where nr_hw_queues
  is two less than the number of CPUs.
  This fix needs both commits released on 10.02.05.00-k
  and 10.02.06.00.a1-k against FCD-316

  - FCD-268: Multiple USCM ELS are sent
  - FCD-280: Fix issues reported by running a few Jammer tests
  Changes: qla2xxx: Retry the USCM ELS 3 times when there are failures.

  - FCD-172: build.sh: Fix udev script installation error

  - ER148402: Install restrictions when binary rpm is already installed.
  Changes: qla2xxx: Updated README file for documentation

  - ERXXXXXX: qla2xxx: Support kdump kernel for NVMe BFS.
  - ERXXXXXX: qla2xxx: Update README file for building kdump initrd in NVMe BFS.

  - ER148402: Disallow install if qla2xxx rpm is installed.
  Changes: qla2xxx: Prevent install from source if rpm is installed.

  - FCD-230: Add additional debug logs
  Changes: qla2xxx: Add additional logs to differentiate between
  FW driver and driver driven ELS

  -FCD-XXXX: Changes to support kdump kernel.
  Changes: qla2xxx: Don't allocate fw dump for kexec kernel and
  Allocate single Q for kexec kernel.

  - FCD-227: Linux Driver order of RDF to follow EDC ELS

  - FCD-225 - Qaucli fails to list scm stats for Qlipper

  - FCD-172: fix udev rule
  Changes: qla2xxx: permission of the rule file set to 644
  - ER148529: NVMe initiator connected to brocade fabric are down
  Changes: qla2xxx: Fix hang on NVME command timeouts.

  - ER148531: SN1600Q/SN1610Q, Gen10PlusSnap4 - Async-login failed errors on BFS boot-up-QXCR1001796980
  Changes: qla2xxx: Suppress unnecessary log messages during login

  - ER148578: Observed that initiator is sending prli type 0x8 for for nvme ports
  Changes: qla2xxx: fix NVME | FCP personality change.

  - ER148141: Driver vmkmgt: Don't differentiate Signals and FPIN's for the Congestion counters when they detected.
  Changes: qla2xxx: Split congestion warnings and alarms based on signals and FPINs

  - ERXXXXXX: Add support for marginal path.
  Changes: qla2xxx: Added support for eh_should_retry_cmd callback in qla2xxx host template.

  - ERXXXXXX: scsi: qla2xxx: Flush all sessions on zone disable
  - ERXXXXXX: scsi: qla2xxx: Fix memory size truncation
  - ERXXXXXX: scsi: qla2xxx: Fix a NULL pointer dereference in an error path
  - ERXXXXXX: qla2xxx: fix sparse warning.
  - ERXXXXXX: qla2xxx: edif: do secure plogi when auth app is present
  - ERXXXXXX: qla2xxx: Add license.
  - ERXXXXXX: qla2xxx: USCM - Do not send EDC/RDF ELS when firmware has already sent it
  - ERXXXXXX: qla2xxx: Inclusion words are applied on release note and readme file
  - ERXXXXXX: qla2xxx: edif: add N2N support for EDIF
  - ERXXXXXX: qla2xxx: Updated drelease.notes header
  - ERXXXXXX: qla2xxx: Fix hang during NVME session tear down.
  - ERXXXXXX: qla2xxx: USCM: Cleaned up a few debug messages
  - ERXXXXXX: qla2xxx: edif: fix edif enable flag

  - ER148546: USCM: QCC Cong Mgmt not available on port with FW:v9.07.00 and DVR:v10.02.05.00.a6-k
  Changes: qla2xxx: setting the flags to indicate to the application that the RDF is complete and
  SCM is supported.

  - ERXXXXXX: Add heartbeat check
  Changes: qla2xxx: Use 'no-op' mailbox command to check to see if FW is still responsive.

  - ERXXXXXX: DEBUG: simulate FW hang.
  Changes: qla2xxx: Driver will detect the hang and recover via hearbeat check.

  - ERXXXXXX: qla2xxx: Check for FW attributes before enabling MQ.
  - ERXXXXXX: qla2xxx: USCM Handle ELS errors from switch by retrying 3 times
  - ERXXXXXX: scsi: qla2xxx: Correct the supported speeds for 16G Mezz card.


  - ER148472: With NPIV ports, link bounce causes loss of strongSwan session at the target.
  Changes: qla2xxx: : fix npiv create errorneous error
  qla2xxx: EDIF: reject AUTH ELS on session down.
  qla2xxx: edif: Fix stale session

  - ER148478: System Crash while NPIV RAW IO ON VPORT LUNS on SLES15 SP3 + QLE 2692 + R7525
  Changes: qla2xxx: fix unsafe removal from link list.

  - ERXXXXXX: qla2xxx: USCM - Send EDC and RDF ELS from the driver

  - ER147707: Device recovery not happening and OS hungs on qla2xxx
  Changes: qla2xxx: v2: fix crash in PCIe error handling
  - ER148123: Issue with Max secure connection with override_lower_limits
  Changes: qla2xxx: v2: fix stuck session
  - ER148402: SLES, Driver Install location is inconsistent.
  Changes: qla2xxx: Fix driver install location for SLES

  - ER148123: Issue with Max secure connection with override_lower_limits
  set and rekey/reauth with240/480-luns disconnected after 2 hr traffi
  Changes: qla2xxx: edif: doorbell tweak

  - ER148448: Issue w.r.t qaucli, where Remote type "Unknown" for eDIF env.
  for qaucli2.4.0.build 20
  Changes: qla2xxx: fix port type info

  - ER148433: The log does not show a valid data rate while the link speed is 64G.
  Changes: qla2xxx: fix debug print of 64G link speed.

  - ER147650: 'show fdmi? command does not list ? OS Name and Version?
  parameter for SLES12SP4-QXCR1001771822
  Changes: qla2xxx: Show OS name and version in FDMI-1
  - ER147707: Device recovery not happening and OS hungs on qla2xxx
  Changes: qla2xxx: fix mailbox recovery during PCIE error
  qla2xxx: v2: fix crash in PCIe error handling
  - ERXXXXXX: qla2xxx: Changes to support FCP2 Target.
  - ERXXXXXX: qla2xxx: include AER debug mask to default
  - ERXXXXXX: qla2xxx: fixes for compilation on RH8.4
  - ERXXXXXX: qla2xxx: Do logout even if fabric scan retries got exhausted.

  - 10.02.05.00.a1-k1 BH 02/27/2021
  - EDIF Changes:
  - ER148247: issue with nvme-npiv env, once we delete npivs, after a while,
  it is reducing strongswan connections.
  Change: free sa index during npiv delete

  - ER148123: Issue with Max secure connection with override_lower_limits set
  and rekey/reauth with240/480-luns disconnected after 2 hr traffi
  Change: adjust online|offline notification to app and
  tweak LOGO on session down.
  - ERXXXXXX: qla2xxx: edif: tweak log message
  - ERXXXXXX: qla2xxx: edif: Redundant code (already set in qla_edb_node_alloc)

  - ER147707: qla2xxx: Device recovery not happening and OS hungs on qla2xxx
  Change: Fix RISC RESET completion polling.

  - ER148111: qla2xxx: FCPowerKit reflects huge delays in CMDlets execution.
  Change: Check lockdown functionality before requesting lockdown feature.

  - ER148277: USCM: Linux Peer showing misleading 'Congested, throttling down,
  permitted: 1', prior to 'Reached low watermark, permitted: 2':
  - Change: Fix misleading debug message

  - ERXXXXXX: adjust request/respond queue size for 28xx
  - ERXXXXXX: qla2xxx: Change %p to %px in the log messages.

  - 10.02.01.00.a15-k1 BH 11/12/2020
  ERXXXXXX: qla2xxx: Updated README file for new module parameters

  - 10.02.01.00.a14-k1 BH 11/06/2020

  - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh
  Change: qla2xxx: Fix crash in qla_nvme_abort_set_option.

  - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN).
  Change: qla2xxx: Handle aborts correctly for port undergoing deletion.

  - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure.

  - 10.02.01.00.a13-k1 BH 10/28/2020

  - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities
  Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up.

  - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config
  Change: qla2xxx: fix N2N + NVME connect retry fail

  - ER147832: Issue with uSCM Linux with QCC CLI for some configuration
  Change: qla2xxx: Show event severity only when device state is congested.

  - ER147824 : scmr_stat sysfs node runs out of memory
  Change: qla2xxx: Come up with a compact version of scmr_stat

  - ER147823: NVMe IO is not getting throttled up or down.
  Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion.

  - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo.
  - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters.
  - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo.
  - ERXXXXXX: qla2xxx: Move an SCM log under a debug level.
  - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value.
  - ERXXXXXX: qla2xxx: Make throttling messages more informative.

  - 10.02.01.00.a12-k1 SK 10/15/2020
  - ER147625: NVMe IO's are failing with Read/Write after LIP reset.
  Change: qla2xxx:Return EBUSY until the remote port delete finishes.

  - ER147653: Target side strongswan start/stop, make initiator crashed.
  Change: qla2xxx: edif: v2 fix double bsg done.

  - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats.
  Change: qla2xxx: Clear Sev and NVMe Target Stats.

  - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored.
  Change: qla2xxx: Fix Throttling algorithm regression.

  - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures.
  Change: qla2xxx: Throttle NVMe I/O commands only.

  - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode.
  - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api.
  - ERXXXXXX: qla2xxx: edif: fix 4byte align.
  - ERXXXXXX: qla2xxx: edif: fix ELS meta data.
  - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset.
  - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear.

  - 10.02.00.02.a11-k1 BH 10/09/2020
  - ER147734 : Lip reset on the isolated port causes server crash
  Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port.

  - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed.
  Change: qla2xxx: Fixes for big endian machines

  - ER147646: Call Trace observed while validating a MPI Pause test scenario.
  Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option.

  - ER147615: Throttling does not work with low I/Os.
  Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters

  - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters
  - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp.
  - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command.
  - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing

  - 10.02.00.02.a10-k1 BH 09/25/2020
  SCM Changes:
  - ERXXXXXX:
  Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down.
  qla2xxx: throttling algorithm improvement.
  qla2xxx: Add throttling support for NVMe targets.

  EDIF Changes:
  - ERXXXXX: LUN loss on ipsec stop/start on target side.
  Change: save Nport on receive of PLOGI
  - ERXXXXX: fix ELS receive collision between physical and NPIV hosts.
  Change: remove erroneous source Nport ID search.

  - ER147570: FCP Performance Drop in latest driver for smaller IOs size.
  Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure.

  - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12
  Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it.

  - ER147418: server crash seen when trying to capture the debugfs stat on isolated port.
  - ER147645: System panic while trying to capture debugfs stats for EED.
  Change: qla2xxx: Check rport before accessing target number.

  - ER147632: Fix potential stale mem access
  Change: remove stale sp pointer reference

  - CQXXXXXX: FPIN events are not readily decodable.
  Change: qla2xxx: Make FPIN events prints human readable.

  - ER146879: Add support to clear SCM Stats
  Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters

  - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset.
  - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only.
  - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation.
  - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec.
  - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command.
  - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API.
  - ERXXXXXX: qla2xxx: lockdown: fix stale sp access.
  - BZ1868688: qla2xxx: tear down session if FW say its down.

  - 10.02.00.02.a9-k1 BH 09/03/2020
  - ER147554 - sg_reset appears hung iterating over too many Qpairs.
  Change - qla2xxx: limit interrupt vectors to number of cpu.

  - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed.

  - ERXXXXX - qla2xxx: Change post del message from debug level to log level.

  - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test.

  - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call.

  - ERXXXXX - Added Structural changes for SCM Phase 2 support.
  Change : qla2xxx: Update structure definitions for SCM to support backward compatibility.

  - 10.02.00.02.a8-k1 BH 08/30/2020
  - ERXXXXXX - Fix point-to-point (N2N) device discovery issue.
  Change - qla2xxx: Fix point-to-point (N2N) device discovery issue.

  - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe.
  Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe.

  - ER147523 - BSG stack trace and SCM display issues.
  Change - SCM: Functional regression with a6 release.

  - ER 147413 - edif: Fix issue with DIF enable target discovery.
  Change - qla2xxx: edif: Fix issue with DIF enable target discovery.

  - ER147480 clear ASYNC_ACTIVE flag to allow relogin.
  Change - qla2xxx: fix stuck session.

  - ERXXXXXX - lockdown: add mpi flash lock down support
  Change - qla2xxx: lockdown: add mpi flash lock down support

  - 10.02.00.02.a7-k1 BH 08/22/2020
  - ER147495 - edif changes
  Change - qla2xxx: edif: fix nvme discovery failure
  qla2xxx: edif: fix els corruption.

  - ER147478 - SLES 15sp1 10.02...a6-k compile warning
  Change - qla2xxx: Compilation changes for sles15sp1

  - ERXXXXXX - add mpi flash lock down support
  Change - qla2xxx: lockdown: add mpi flash lock down support
  qla2xxx: lockdown: fix compile problem. do not submit

  - ERXXXXXX: SCMR changes
  Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting.
  qla2xxx: SCM: Changes to separate current_events and current_state.
  qla2xxx: SCMR: Increase local array size.

  - ER147298 : USCM "Congestion Warning" counter regression
  Change - qla2xxx: Correct FPIN Structure Definition (Severity).

  - 10.02.00.02.a6-k1 BH 08/13/2020
  - ERXXXXXX - fix crash on session cleanup + unload.
  Change - qla2xxx: fix crash on session cleanup + unload.

  - ER147329 - edif changes
  Change - qla2xxx: edif: fix compile error. do not submit
  qla2xxx: edif: fix double free on ELS send failure.
  qla2xxx: edif: reject els if non secure device.
  qla2xxx: edif: reject ELS on session down.
  qla2xxx: edif: redefine purex dest addr to be more consistent.
  qla2xxx: edif: tweak debug messages.
  qla2xxx: edif: fix nvme+edif target connect problem.

  - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver
  Change - qla2xxx: edif: move bsg auth els into separate routine.
  qla2xxx: edif: Fix error in BSG ELS path that has valid response data.

  - ER147312 - Add support to report MPI FW state.
  Change - qla2xxx: Add support to report MPI FW state.
  qla2xxx: Fix reset of MPI firmware.
  qla2xxx: Fix MPI reset needed message.

  - ER147437 - With a5 driver observed warning messages.
  Change - qla2xxx: Compilation changes for Citrix, rhel and sles.

  - 10.02.00.02.a5-k1 BH 07/31/2020
  - ER147418: server crash seen when trying to capture the debugfs stat on isolated port.
  Change - qla2xxx: Don't process target debugfs stats if port is isolated.

  - ERXXXXXX : Add SCM stats to scmr_stats node.
  Change - qla2xxx: Add SCM stats to scmr_stats node.

  - ER147419 : Fix crash due to request q pointer extraction failure.
  Change - qla2xxx: Latency measurement patch.

  - ERXXXXXX : edif: remove redundant field in port_id_t
  Change -qla2xxx: edif: remove redundant field in port_id_t

  - ER147331 - extract bbc from PLOGI template payload.
  Change -qla2xxx: Fix buffer-buffer credit extraction error

  - ERXXXXXX : Split qla2x00_configure_local_loop()
  Change scsi: qla2xxx: Split qla2x00_configure_local_loop()

  - ERXXXXXX : SCMR - Add I/O flow control.
  Change - qla2xxx: SCMR - Add I/O flow control.

  - 10.02.00.02.a4-k1 BH 07/23/2020
  - ER147402 - Do not install nvme auto connect script if OS is installing it.
  Change - qla2xxx: auto-connect scripts are install based on nvme-cli package.

  - ERXXXXXX - Fixed return status of nvme fcp request.
  Change - qla2xxx: Set NVME status code for failed NVME FCP request.

  - ERXXXXXX - Multi-que support for TMF.
  Change - qla2xxx: Multi-que support for TMF.

  - ERXXXXXX ? edif changes
  Change - qla2xxx: edif: simplify reserve/release of sa_index.
  qla2xxx: edif: tweak debug log.
  qla2xxx: edif: adjust ELS resp length.
  qla2xxx: edif: send logo on app stop.
  qla2xxx: edif: remove prlo in session deletion.
  qla2xxx: edif: Fix app stop stall.

  - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver.
  Change - qla2xxx: Correct fpin_descriptor definition.
  qla2xxx: Consolidate EDIF & SCM Purex Calls.

  - ERXXXXXX - Calculate avg. time taken by different components for IO completion.
  Change - qla2xxx: Latency measurement patch.

  - 10.02.00.02.a3-k1 BH 07/16/2020
  - ER147348 - Observing firmware dump while running qaucli -g post port isolation.
  Change - qla2xxx: Don't check firmware state in case of chip is down.

  - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported.
  Change - qla2xxx: Add support for loading external modules on SuSE.

  - ER147361 - System panic after enabling port isolated during TimeOutReset.
  Change - qla2xxx: Synchronize the update the host counters using lock.

  - ER147370 - Hardware Error counter not incrementing for MBX command timeout.
  Change - qla2xxx: Update hardware error count for various error conditions.

  - ERXXXXXX - The change is to help in debuggging.
  Change - qla2xxx: Move some messages from debug to normal log level.

  - ER147346 - Observed a call trace after port isolation.
  Change - qla2xxx: Fix the call trace for flush workqueue.

  - ERXXXXXX - For debug purpose.
  Change - qla2xxx: Add error counters to debugfs node.

  - 10.02.00.02.a2-k1 AE 07/10/2020
  - ERXXXXXX - qla2xxx: Fix TCM compilation issues.
  Change - Enabled build of tcm_qla2xxx module and fixed compile issues.

  - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down.
  Change - Added wait during app stop.

  - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events.
  Change - Driver changes to skip SLER for Async event command.

  - ER147323 - qla2xxx: Correct the check for sscanf return value.
  Change - Driver updated to check version correctly.

  - ERXXXXXX - qla2xxx: v2: Add EDIF support.
  Change - Refactoring EDIF code for modularity.

  - ER147298 - Congestion Warning/Alarm counters fail to increment
  Change - Update driver to increment the counters for congestion signals.

  - 10.02.00.02.a1-k1 AE 06/29/2020
  - qla2xxx: Enable IOCB throttling by default.
  - qla2xxx: Implementation to get and manage host, target stats and initiator port.
  - qla2xxx: Add SLER and PI control support.
  - qla2xxx: Do not log message when reading port speed via sysfs
  - qla2xxx: fix null pointer access.
  - qla2xxx: Use MPI hang trigger to do PEGTUNE halt.
  - qla2xxx: Reduce erroneous error in link reset path
  - qla2xxx: v2: fix stalled N2N reconnect.
  - qla2xxx: Fix warnings on SLES12SP5.
  - qla2xxx: Fix compilation issues on SLES15
  - qla2xxx: Compilation Fixes for SLES15SP1.
  - qla2xxx: Debugfs compilation issue fix for RH7.6.
  - qla2xxx: Fix gcc test compile error output being printed.
  - qla2xxx: Timestamp device online and offline transitions.
  - qla2xxx: Add rport fields in debugfs.
  - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices.
  - qla2xxx: Setup debugfs entries for remote ports.
  - qla2xxx: Fix edif related compilation issue on RH7.6.
  - Fixes for compilation on hpe branch
  - qla2xxx: Compilation fixes for RH8.2
  - qla2xxx: Compilation changes for RH7.6
  - qla2xxx: Fixes for compilation on RH7.x I
  - qla2xxx: bsg_job to bsg_job_t
  - qla2xxx: I Unify source code to work with newer kernels.
  - qla2xxx: Makefile changes from code-uni-devel-10x.
  - qla2xxx: qla_edif file changes to compile the driver.
  - qla2xxx: Fix compilation issues.
  - qla2xxx: Fix Makefile issue.
  - qla2xxx: fix compile error
  - qla2xxx: Use explicit LOGO in target mode
  - qla2xxx: Add EDIF support.
  - qla2xxx: Addd edif related files.
  - qla2xxx: Fix MPI failure AEN (8200) handling.
  - qla2xxx: SCM - Backport optimizations and style changes from upstream work.
  - qla2xxx: Fix warning in qla_attr.c file.
  - qla2xxx: Fix nvme compilation error.
  - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt
  - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking.
  - qla2xxx: Fix WARN_ON in qla_nvme_register_hba.
  - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime.
  - qla2xxx: Make tgt_port_database available in initiator mode.
  - qla2xxx: reduce noisy debug message.
  - qla2xxx: Fix mailbox Ch erroneous error
  - qla2xxx: fix login timeout.
  - qla2xxx: Accomodate for SCM FW attribute bit change.
  - qla2xxx: post FC event (FPIN) to transport FPIN handler.
  - qla2xxx: Hide fc_host_fpin_rcv kernel dependency.
  - qla2xxx: Add changes to compile across various kernels.
  - qla2xxx: Use active targets to update SCM stats.
  - qla2xxx: Move SCM functions to qla_isr to keep changes local.
  - qla2xxx: Code to process FLOGI ACC extended payload.
  - qedf: Fix compilation issue - revisit.
  - qla2xxx: SCM Phase 1 Implementation + 2 other patches.
  - qla2xxx: Enable PUREX passthru post ISP reset.
  - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV.
  - qla2xxx: performance tweak
  - scsi: qla2xxx: fix fcport null pointer access.
  - fixup! qla2xxx: Fix unbound NVME response length.
  - scsi: qla2xxx: Fix unbound NVME response length
  - qla2xxx: Add host attribute to trigger MPI hang.
  - qla2xxx: ONEOFF: silent dbg messages for good path io.
  - qla2xxx: ONEOFF: fix pDIF detection
  - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF.
  - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF
  - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI
  - qla2xxx: HPE 3PAR private T10-PI support.
  - qla2xxx: Check for fabric_priority flag during login
  - qla2xxx: use iocb_fabric_priority flag
  - qla2xxx: Fix QoS name and add debug logs
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: HPE: Register FDMI QOS
  - qla2xxx: Add bsg interface for qos lun level bitmask.
  - qla2xxx: Read E2E QoS fcport priority bitmasks from flash.
  - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field.
  - qla2xxx: Add fabric priority qos lun iocb mechanism.
  - qla2xxx: Implement CT command GFO (Get Fabric Object).
  - qla2xxx: Add support for fabric priority per target.
  - qla2xxx: fix mtcp dump collection failure.
  - qla2xxx: Set Nport ID for N2N
  - qla2xxx: Fix crash during device discovery.
  - qla2xxx: Handle NVME status iocb correctly.
  - qla2xxx: Remove restriction of FC T10-PI and NVME
  - qla2xxx: serialize fc_port alloc in N2N
  - qla2xxx: NPIV does not come up after FW dump.
  - qla2xxx: fix RDP respond data format bug.
  - qla2xxx: force semaphore on flash validation failure.
  - qla2xxx: add more FW debug information
  - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe
  - qla2xxx: Update BPM enablement semantics.
  - qla2xxx: fix FW resource print error.
  - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs.
  - qla2xxx: Ensure flash updates return possible failure status through bsg interface.
  - qla2xxx: Improved secure flash support messages
  - qla2xxx: fix flag passing error
  - qla2xxx: Use FC generic update firmware options routine for ISP27xx.
  - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options.
  - qla2xxX: Add 16.0GT for PCI String
  - qla2xxx: Use FW_STARTED macro
  - qla2xxx: Add fixes for mailbox command
  - qla2xxx: Fix login IOCB flag
  - qla2xxx: Save rscn_gen for new fcport
  - qla2xxx: firmware option 3 is clobbered by speed set
  - qla2xxx: ISP28xx active FW region
  - qla2xxx: Add portname to print logs in qla24xx_logio_entry().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add Speed in SFP print information
  - qla2xxx: Fix RDP response size
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Add vendor extended FDMI additions and amendments.
  - qla2xxx: Provide separate RDP enable.
  - qla2xxx: Add vendor extended RDP additions and amendments.
  - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP.
  - qla2xxx: Add 2061 PCI ID
  - qla2xxx: Remove all DIX-0 references
  - qla2xxx: Add endianizer macro calls to fc host stats.
  - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data.
  - qla2xxx: Move free of fcport out of interrupt context.
  - qla2xxx: Add beacon LED config sysfs interface.
  - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect

  - 10.01.00.22-k AE 06/29/2020
  - Upstream driver as part of Linux 5.6


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137v
changelog:
  - Backport upstream patches  (Severity:Medium)
  - Add PHY reset workaround in change MTU path for 5717/19/20  (Severity:Medium)
  - Update the copyright (Severity:Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137w
changelog:
  - Add SLES 15 support  (Severity:Medium)
  - Add RHEL 7.5 support (Severity:Medium)
  - Fix RHEL 6.4 compilation (Severity:Medium)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137x
changelog:
  - Add Ubuntu 18.04 support  (Severity:Minor)
  - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor)
  - Avoid usleep_range() with holding spin lock (Severity:Minor)


