# changelog

author: Emulex Automated Build User
changelog:
  - Changed version to 10.7
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library 
  - Added support for RHEL 7.2, SLES12 SP1


author: Broadcom Automated Build User
changelog:
  - Changed version to 11.2
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 11.4
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.0
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.2
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library
  - Added support for RHEL 8, SLES 12 SP4, and SLES 15 SP1
  - Removed support for SLES 11 SP3 and SLES 11 SP4


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.4
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library
  - Added support for SLES 12 SP5
  - Removed support for RHEL 6


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.6
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library
  - Added support for SLES 15 SP2
  - Removed support for SLES 12 SP2 and SLES 12 SP3


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.8
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 14.0
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 14.2
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 14.3
  - Updated libdfc library
  - Updated libemsdm library
  - Updated libemulexhbaapi library


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 4.0.0.0-2
  ---------------------------------

  v6.03 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP2071 and ISP2271 support
  Introduced: v6.03 build1
  Impact: HW: ISP2071 and ISP2271 based adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 5.0.0.0-2
  ---------------------------------

  v6.03 build3:
  -------------
  Defect/Enhancement: Defect
  Problem: HBA_GetFcpTargetMapping fails for LUN number > 256
  Solution: Honor LUN addressing method while reading LUN numbers for
  	  HBA_GetFcpTargetMapping API with LUN numbers > 256
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: HBA_SendScsiInquiry and HBA_SendReadCapacity fails
  	 for LUN number > 256
  Solution: Use SAM-2 LUN addressing for HBA_SendScsiInquiry and
  	  HBA_SendReadCapacity SNIA APIs for LUN numbers > 256
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 5.0.0.0-3
  ---------------------------------

  v6.03 build10:
  -------------
  Defect/Enhancement: Defect
  Problem: Access denied messages seen on VMware ESXi 5.1
  Solution: Block get shared database count API for ESXi
  Introduced: Day One
  Impact: HW: All adapters
  	OS: VMware ESXi 5.1
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: SDGetQoS API succeeds even if QoS region is not
  	 present in the flash
  Solution: Add QoS region check in SDGetQoS API
  Introduced: v6.02 build13
  Impact: HW: ISP2031, ISP8031, ISP2071, ISP2271
  	OS: VMware ESXi 5.1
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP2261 support
  Introduced: v6.03 build10
  Impact: HW: ISP2261 based adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add MPI and PEP versions for 27xx adapters
  Introduced: v6.03 build10
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-1
  ---------------------------------

  v6.04 build3:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add ppc64le (64-bit little endian PowerPC) API support
  Introduced: N/A
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Online Flash update support
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Smart SAN API support
  Introduced: v6.04 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Flash update fails if online flash update feature is disabled
  	 or not supported by QLogic applications
  Solution: Allow flash update if online flash update feature is disabled
  	  or not supported by QLogic applications
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-2
  ---------------------------------

  v6.04 build8:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Return FW status in BBCR API for port down case
  Introduced: v6.04 build6
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build6:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Buffer-to-Buffer Credit Recovery API support
  Introduced: v6.04 build6
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Private Statistics API support
  Introduced: v6.04 build6
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Multiple application may do flash update simultaneously for
  	27xx adapters
  Solution: Use serial number based file for 27xx flash update token
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: VMware ESXi 5.1
  	Protocol: FC

  v6.04 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Read FW attributes at API initialization
  Introduced: v6.04 build5
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build4:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Validate Capabilities and Outage duration before FW activation
  Introduced: v6.04 build4
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-4
  ---------------------------------

  v6.04 build12:
  -------------
  Defect/Enhancement: Defect
  Problem: timeout value is not properly converted from seconds into milliseconds
  Solution: Avoid converting timeout value twice into 
  	CPQFC_SendScsiCommandEx API
  Introduced: v6.04 build12
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build11:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add CPQFC_SendScsiCommandEx API support
  Introduced: v6.04 build11
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build10:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add DPort Diagnostics support
  Introduced: v6.04 build10
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Extended Private Statistics API support
  Introduced: v6.04 build10
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Linux ARM (Euler) support
  Introduced: v6.04 build10
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build9:
  -------------
  Defect/Enhancement: Defect
  Problem: Flash MPI and PEP version are seen out-of-sync
  Solution: Read flash MPI and PEP verions from primary set
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-5
  ---------------------------------

  v6.04 build39:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP2081, ISP2281, ISP2089 and ISP2289 support
  Introduced: v6.04 build1
  Impact: HW: ISP2081. ISP2281, ISP2089 and ISP2289 based adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-6
  ---------------------------------

  v6.04 build40:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Read flash MPI and PEP versions from active image set
  Introduced: v6.04 build40
  Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-7
  ---------------------------------

  v6.04 build41:
  -------------
  Defect/Enhancement: Defect
  Problem: BSG interface fails if /tmp is mounted with tmpfs on shared memory
  Solution: Use /var/cache/sdmapi for BSG device creation
  Introduced: v6.04 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-8
  ---------------------------------

  v6.04 build45:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add NVRAM parameter to select FCP or NVME targets
  Introduced: v6.04 build45
  Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build44:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps issues seen with NVME target in RHEL
  Solution: Detect NVME target/luns by traversing sysfs tree
  Introduced: v6.04 build42
  Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build43:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps issues seen with NVME target in NPIV configuration
  Solution: Set deafult value of NVME targets for NPIV ports
  Introduced: v6.04 build42
  Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build42:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add NVME target support for QLogic/Marvell Apps
  Introduced: v6.04 build42
  Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-9
  ---------------------------------

  v6.04 build47:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps initialization delay seen with NPIV ports
  Solution: Allow reading active flash regions for NPIV ports
  Introduced: v6.04 build39
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build46:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Restrict application features for NVME targets
  Introduced: v6.04 build45
  Impact: HW: ISP2071, ISP2271, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-10
  ----------------------------------

  v6.04 build48:
  -------------
  Defect/Enhancement: Defect
  Problem: NVME targets not seen when NVME Id and Subsys Id are different
  Solution: Identify NVME targets using subsys Id
  Introduced: v6.04 build42
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-11
  ----------------------------------

  v6.04 build49:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Allow SDGetActiveRegions API for 27xx based adapters
  Introduced: v6.04 build45
  Impact: HW: ISP2071, ISP2271, ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-12
  ----------------------------------

  v6.04 build52:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Allow SCM stats for NVMe targets for Marvell/QLogic Apps
  Introduced: v6.04 build52
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: Modalias removal request from HPE
  Solution: Remove modalias support from Enablement kit rpm
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build51:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add additional SCM stats for FCP targets for Marvell/QLogic Apps
  Introduced: v6.04 build51
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Defect
  Problem: Corruption seen after flash update with some inbox drivers
  	 when BSG device creation fails
  Solution: Use /dev/bsg path to create BSG device creation
  Introduced: v6.00 build9
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build50:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Allow SCM stats for FCP targets for Marvell/QLogic Apps
  Introduced: v6.04 build50
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-13
  ----------------------------------

  v6.04 build55:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added MPI Firmware Dump support
  Introduced: v6.04 build55
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build54:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Secure remote port info support
  Introduced: v6.04 build54
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build53:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Check driver for SCM stats support before reading SCM stats
  Introduced: v6.04 build53
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-14
  ----------------------------------

  v6.04 build56:
  -------------

  Defect/Enhancement: Defect
  Problem: LUN QoS API returns "Not Supported"
  Solution: Fixed QoS value read issue in BSG path
  Introduced: v6.04 build21
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61, ISP2031
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-15
  ----------------------------------

  v6.04 build57:
  -------------

  Defect/Enhancement: Defect
  Problem: Delay seen in Application bringup on some inbox drivers
  Solution: Do not perform retries for newer features if driver returns
  	  not supported error
  Introduced: v6.04 build28
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-16
  ----------------------------------

  v6.04 build63:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Allow NVMe specific APIs for newer ISPs
  Introduced: v6.04 build63
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build62:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP FW and MPI FW lockdown bits
  Introduced: v6.04 build62
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build61:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Provide lockdown mode error codes to apps
  Introduced: v6.04 build61
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build60:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added adapter firmware lockdown support
  Introduced: v6.04 build60
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build59:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added EP2989 support
  Introduced: v6.04 build59
  Impact: HW: EP2989
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build58:
  -------------
  Defect/Enhancement: Defect
  Problem: HBA Parameters read fails for newer adapters for inbox drivers
  Solution: Read active HBA Parameters region set from flash
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-17
  ----------------------------------

  v6.04 build75:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Mailbox passthru support
  Introduced: v6.04 build75
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build74:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added NVRAM parameters for SCMR Profile support
  Introduced: v6.04 build74
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build73:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added SCMR Profile support
  Introduced: v6.04 build73
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build72:
  -------------
  Defect/Enhancement: Defect
  Problem: Random apps crash seen when large number of vports present
  Solution: Validate vport memory pointers before accessing it
  Introduced: v6.04 build24
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build71:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added EP2881 and EP2981 support
  Introduced: v6.04 build71
  Impact: HW: EP2881, EP2981
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build70:
  -------------
  Defect/Enhancement: Defect
  Problem: Flash update failure on UOS on ARM (aarch64)
  Solution: Corrected BSG pointers for UOS on ARM
  Introduced: v6.04 build24
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build69:
  -------------
  Defect/Enhancement: Defect
  Problem: Invalid LUN size display for small sized (In MBs) and large sized
  	 (in TBs) NVMe LUNs
  Solution: Use correct read capacity format to get LUN size of NVMe LUNs
  Introduced: v6.04 build52
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build68:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps delay seen with NVMe targets
  Solution: Cache common NVMe target data to avoid multiple calls to NVMe targets
  Introduced: v6.04 build52
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build67:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Session shutdown state macro support
  Introduced: v6.04 build67
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build66:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps crash seen with HBA_RemoveCallback SNIA API
  Solution: Avoid double free of memory freed in HBA_RemoveCallback SNIA API
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build65:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps delay seen with disabled/isolated port
  Solution: Avoid apps retries for disabled/isolated port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build64:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added USCM Phase 2 support
  Introduced: v6.04 build64
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Defect
  Problem: Apps crash seen with disabled/isolated port
  Solution: Fixed apps crash with disabled/isolated port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-18
  ----------------------------------

  v6.04 build81:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added NVRAM parameters for UEFI boot support
  Introduced: v6.04 build81
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build80:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added additional USCM statistics info
  Introduced: v6.04 build80
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build79:
  -------------
  Defect/Enhancement: Defect
  Problem: Port reset seen on all ports of the adapter after HBA parameter update
  Solution: Allowed reset only in HBA parameter modified port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build78:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps crash seen with DPort test with newer firmware
  Solution: Increase response buffer size to read extra data provided by FW
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build77:
  -------------
  Defect/Enhancement: Defect
  Problem: NPIV port seen as physical port on newer OSes
  Solution: Corrected host number list
  Introduced: v6.04 build24
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build76:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added FC-GS-8 based speed definitions
  Introduced: v6.04 build76
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-19
  ----------------------------------

  v6.05 build7:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Use 32bit buffer size of SFP FW update
  Introduced: v6.05 build7
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build6:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added 64G FC SFP FW update support
  Introduced: v6.05 build6
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Remote Port API support
  Introduced: v6.05 build5
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build4:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Secure Port V2 API support
  Introduced: v6.05 build4
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build3:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v6.05 build3
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build2:
  -------------
  Defect/Enhancement: Defect
  Problem: Feature API confilct seen FOAPI
  Solution: Removed conflicting duplicate feature APIs
  Introduced: v6.05 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v6.05 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build90:
  -------------
  Defect/Enhancement: Defect
  Problem: Incorrect NVMe portID seen when multiple targets present
  Solution: Provide valid PortIDs for NVMe targets
  Introduced: v6.04 build85
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build89:
  -------------
  Defect/Enhancement: Defect
  Problem: Incorrect secure target fields seen
  Solution: Provide valid info for secure targets
  Introduced: v6.04 build54
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build88:
  -------------
  Defect/Enhancement: Defect
  Problem: NVRAM dat file update failure on 8G adapter
  Solution: Fixed dat file update on 8G adapter
  Introduced: v6.04 build2
  Impact: HW: ISP2532
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build87:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Uncorrectable FEC error count support in USCM stats 
  Introduced: v6.04 build87
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build86:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added I/O Throttling support
  Introduced: v6.04 build86
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build85:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added PortID support for NVMe targets
  Introduced: v6.04 build85
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build84:
  -------------
  Defect/Enhancement: Defect
  Problem: Boot code valid bit is set for all boot codes
  Solution: Set boot code valid bit only when valid boot code is found
  Introduced: v6.04 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build83:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Virtual Lane support
  Introduced: v6.04 build83
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build82:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added new NVRAM parameters
  Introduced: v6.04 build82
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-1
  ----------------------------------

  v7.00 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Use OS provided libsysfs library
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-2
  ----------------------------------

  v7.00 build3:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps issue seen with static library
  Solution: Fixed static library issue
  Introduced: v7.00 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build2:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps runtime failure on RHEL 9 due to libsysfs function
  Solution: Removed dependency of libsysfs function
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-3
  ----------------------------------

  v7.00 build6:
  -------------
  Defect/Enhancement: Defect
  Problem: checksec.sh reported security property issues
  Solution: Fixed checksec.sh reported security property issues
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added driver maintenamce mode support for FW load error
  Introduced: v7.00 build5
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build4:
  -------------
  Defect/Enhancement: Defect
  Problem: Debug symbols present in library binary
  Solution: Removed debug symbols from library binary
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Emulex Automated Build User
changelog:
  - Changed version to 10.7
  - Added support for RHEL 6U8
  - Added support for RHEL 7U2
  - Added support for SLES12 SP1


author: Emulex Automated Build User
changelog:
  - Changed version to 11.1
  - Added support for RHEL 7U3
  - Added support for SLES 12 SP2
  - Removed support for RHEL 6U5


author: Broadcom Automated Build User
changelog:
  - Changed version to 11.2
  - Added support for RHEL 6U9
  - Added support for RHEL 7U4
  - Added support for SLES 12 SP3
  - Removed support for RHEL 7U0
  - Removed support for SLES 12 SP0


author: Broadcom Automated Build User
changelog:
  - Changed version to 11.4
  - Removed support for RHEL 6U6
  - Removed support for RHEL 7U1
  - Added support for RHEL 7U5
  - Added support for SLES 15 SP0


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.0
  - Removed support for RHEL 6U7
  - Removed support for SLES 12 SP1
  - Added support for RHEL 6U10
  - Added support for RHEL 7U6
  - Added support for RHEL 8U0
  - Added support for SLES 12 SP4
  - Added support for SLES 15 SP1


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.2
  - Removed support for SLES 11 SP3
  - Removed support for SLES 11 SP4
  - Removed support for RHEL 6U8
  - Removed support for RHEL 7U2
  - Removed support for RHEL 7U3


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.4
  - Added support for RHEL 7U7
  - Added support for RHEL 8U1
  - Added support for SLES 12 SP5
  - Removed support for RHEL 6U9
  - Removed support for RHEL 6U10
  - Removed support for RHEL 7U4


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.6
  - Added support for RHEL 7U8
  - Added support for RHEL 8U2
  - Added support for SLES 15 SP2
  - Removed support for SLES 12 SP2
  - Removed support for SLES 12 SP3


author: Broadcom Automated Build User
changelog:
  - Added support for RHEL 8U5
  - Removed support for RHEL 7U5
  - Removed support for RHEL 7U6
  - Removed support for RHEL 7U7
  - Removed support for RHEL 7U8
  - Removed support for RHEL 8U1
  - Removed support for RHEL 8U2
  - Removed support for RHEL 8U3
  - Removed support for SLES 15 SP1
  - Removed support for SLES 15 SP2


author: Broadcom Automated Build User
changelog:
  - Changed version to 14.2
  - Added support for RHEL 8U6
  - Added support for RHEL 9U0
  - Added support for SLES 15 SP4


author: Kumar Rahul<Linux_SWdeliverables@external.groups.hp.com> 3.2-5
changelog:
  - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards


author: Shreya Roy Chowdhury<Linux_SWdeliverables@external.groups.hp.com> 3.2-6
changelog:
  - Corrected Link state display information for Qlogic Adapters
  - Added MSA G3 support in Scsi_info.h


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.08.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.01
      
      09.09.00
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.01
      
      09.09.00
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.03.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.02
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.02
changelog:
  -     The Firmware fixes the following:
      
        * Unsuccessful read of the SFP Temperature which will trigger a Server Shutdown. 
        * Message related to a Mailbox 0x48 Firmware dump saved to buffer.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.09.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      Non-disruptive firmware upgrades: non-disruptive firmware updates is enabled
      and will not require a server reboot to apply.
      
      Added support for:
      
      RedHat Enterprise Linux 8.8
      
      RedHat Enterprise Linux 9.2
      
      SuSE Linux Enterprise Server 15 SP5


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.09.01
changelog:
  -     Fixed the following behavior:
      
      Temperature Misreading: the adapter was reading incorrect reading of the
      temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small
      Form-factor Pluggable. The symptom would result in a temperature spike and
      potentially reset the system


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.10.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.09.07
      
      09.14.01
      
      7.36
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Adds support for a second source drive pre-amp, and improves reliability with an updated direct offline scan algorithm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      Corrects a potential data integrity issue during unaligned write commands, found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-2.1
changelog:
  -          * Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
          * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager
          * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..,


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-2.1
changelog:
  -      Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-4.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.
        * Assert fixes, logging enhancements and all current firmware improvements.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      **Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -     *Problems Fixed:**
      
        * This firmware implements the Firmware Security Log Page.
      
        * This firmware contains a change to prevent occasional command completion times in the 4-5 second window when command is received just as the drive is transitioning from active to Idle A.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-2.1
changelog:
  -      **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**
        * **Customers who already installed firmware version HPD3 do not need to update to HPD3(B).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-2.1
changelog:
  -      Added support for SmartRAID 3154-8e RAID controller.
        * Added support for HPE Smart Array P824i-p MR Gen10 Controller.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5
changelog:
  -     This firmware includes:
      
        * New servo which disables a feature that could cause unrecoverable data errors. 
        * A fix for an issue where the drive could become unresponsive after a hard reset.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7
changelog:
  -      This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.'


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD9
changelog:
  -      Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fix command timeout and uncorrectable error improvement.
        * Added features for SAS4 auto power swtiching and thermal requirement.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      FW update to eliminate the risk of data error at unexpected power-off during specific I/O combination.
        * Adjust SoC clock in fw to bridge the LBA info. transfer timing gap and remove the risk of buffer CRC error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-4.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4IASHPK3
changelog:
  -      Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4IASHPK3-2.1
changelog:
  -      Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4
changelog:
  -      Reverted OCP spec features to maintain compliance to OCP spec commands over NVMe-MI
        * Implemented real Active Measured Latency by adding OCP 2.0 C3 Log page


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      This firmware fixes an issue where the drive can become inaccessible after an emergency power off, and corrects a potential verification issue during read recovery.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.  
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-3.1
changelog:
  -      Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Improves performance in certain file systems and implements fixes for several of the previous firmware's shortcomings.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD9
changelog:
  -     This firmware revision corrects a rare situation where a Cryptographic Erase
      could result in random data instead of the expected deterministic zeros. This
      is judged as low severity because it does not compromise user data or
      security, but justifies the update to preclude potential security concerns.
      There are several items that reduce the probability of hangs and provide some
      minor performance improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA
changelog:
  -      This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fixed a PSuite FwCheck L5005 error at the time of Support Service Pack for ProLiant (SPP) execution.
        * Fixed a L4500 error at the time of device WWN update.
        * Fixed a write CMD timeout at the time of SPL happens during sanitize.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -     This FW release deploys an Enhanced Media Scan algorithm that addresses an
      issue when the host system does not provide enough idle time for drive's
      Foreground Media Scan to be activated, which is needed to ensure long term
      drive reliability. It also addresses few minor issues.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      The updates were included in a regularly scheduled 5300 maintenance release. This firmware has a security version upgrade to include TCGe SKUs and prevent a downloading of a back level firmware version of HPG0 after upgrading to HPG1.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD6
changelog:
  -      Reduced the occurrence probability of PMIC busy issue. 
        * Fixed the system data error at the drive power on issue. 
        * When the PLP operation starts, the waiting Unmap request to the 4KB not-aligned host write area is canceled to be able to complete PLP correctly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7
changelog:
  -      Reduced the occurrence probability of PMIC busy issue by stopping PLP capacity check to reduce i2c access to PMIC.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -     *Problems Fixed:**
      
        * This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPG1. 
        * This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-2.1
changelog:
  -      **Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.**
        * **Customers who already installed firmware version HPG1 do not need to update to HPG1 (B).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-2.1
changelog:
  -     *Enhancements/New Features for HPG1 (B):**
      
        * Adds support for HPE ProLiant Gen10 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-3.1
changelog:
  -      **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**
        * **Customers who already installed firmware version HPG1 do not need to update to HPG1(C).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-3.1
changelog:
  -      Added support for SmartRAID 3154-8e RAID controller.
        * Added support for HPE Smart Array P824i-p MR Gen10 controller.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-2.1
changelog:
  -      This firmware updates the drive to indicate NDU compliance.
        * Online firmware update fails when drives are connected behind AHCI controller.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      This firmware includes a fix for an issue where the LED would continue blinking after a Sanitize operation completed.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4
changelog:
  -      Fix bugs found in the previous version and improve on TTR (Time To Ready) requirement to fix device temporarily not found issue after hot-plug.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK5
changelog:
  -      Prioritize disabling Non-Fatal Error reporting at the beginning of FLR processing.
        * Fix known FW bug PI/CI indexing issue.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      This firmware adds a feature that will periodically assess the health of the writer element of the head by verifying the data after a write operation to ensure more robust data integrity.
        * When performing format on drives with marginal servo flaws, it takes too long to format or format fails with 03/31 reported across the interface on subsequent commands. This firmware includes a change that moves the servo flaw characterization retries earlier in the sequence of format.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      This update includes a fix that prevents unrecoverable read errors in highly localized write intensive workload, and a new servo code revision that improves performance under specific vibration conditions.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-2.1
changelog:
  -      Fixes an issue in previou version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      **Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -     *Problems Fixed:**
      
        * Version HPD4 prevents the potential for incorrect data to be written to the drive under extremely rare circumstances when the drive experiences a hard reset. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -      **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**
        * **Customers who already installed firmware version HPD4 do not need to update to HPD4 (B).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4-2.1
changelog:
  -     *Problems Fixed:**
      
        * Version HPD4 prevents the potential for incorrect data to be written to the drive under extremely rare circumstances when the drive experiences a hard reset. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
      
      **Problems Fixed for HPD4 (B):**
      
        * Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - "Device appears more than once in tree". The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
        * Component fails to update the firmware for drives connected behind an HP Smart Array P431 controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7
changelog:
  -     *Problems Fixed:**
      
        * This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD7. 
      
        * This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.
      
        * This firmware prevents asserts on a sequential write which can result in devices being lost from the configuration. It also preserves persistent reservation through downloads which prevents loss of performance.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      This firmware allows the drive to meet the requirements for Azure Stack certification. 
        * This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label.  Any removed characters are replaced with blank place holders so the log format will not be changed.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD9
changelog:
  -     This firmware version updates the Vendor ID in the standard inquiry to 'HPE',
      in previous versions it was 'HP.'


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Removed printed circuit board assembly serial number from product serial number field on VPD 80h


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      This firmware includes a fix for an issue that could cause timeout errors during certain sequential write corner cases. There is also a fix for slow response time during random write workloads.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      This firmware includes a fix for an issue where a drive could become format corrupt after a power cycle if write commands were being executed before the power loss.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      New servo which prevents the drive from posting non-media errors.
        * A fix to prevent the drive from becoming unresponsive during certain mixed read/write random workloads.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5
changelog:
  -      This firmware includes a change to reduce response times on random read/write workloads where commands are sent at slow interval (one every few hundred milliseconds).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configuratioans.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -     *Enhancements/New Features:**
      
        * Improved robustness of Adjacent Track Interference (ATI) mitigation in System.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -     *Problems Fixed:**
      
        * Persistent Write Cache release size was miscalculated when disk write operation completed before command complete was reported to host which could result in slow sequential write performance of the drive.
        * Drive would stop operations when disk received COMRESET command during firmware download (DOWNLOAD MICROCODE command).  
      NOTE: If this error occurs, data integrity is maintained and reboot is
      required to restart the drive operation.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7
changelog:
  -      This firmware revision improves low-temperature performance and Error Correction Code (ECC) error recording for some commands. 
        * It also improves internal logging capabilities for failure analysis.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG8
changelog:
  -      Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -     This firmware includes
      
        * New servo which prevents the drive from posting non-media errors
        * A fix for an issue where the drive could become unresponsive after a hard reset


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      The FW version is Changed from HPG0 to HPG1. Changed the thermal throttling scheme. SMART 60 was matched with Tcase 70 and Run the thermal throttling at SMART 65.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -     *Enhancements/New Features:**
      
        * Firmware version HPG4 is designed to prevent any previous firmware revisions from being loaded onto the drive, after the drive is upgraded to HPG4 firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -     *Problems Fixed:**
      
        * This firmware corrects a potential issue where the data in the reserved tracks is not properly updated, eliminating the risk of a drive not finishing the boot process on power up.
        * Other maintenance fixes and updates are also included with the new firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-2.1
changelog:
  -      **Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.**
        * **Customers who already installed firmware version HPG4 do not need to update to HPG4 (B).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-2.1
changelog:
  -     *Enhancements/New Features:**
      
        * Firmware version HPG4 is designed to prevent any previous firmware revisions from being loaded onto the drive, after the drive is upgraded to HPG4 firmware. 
      
      ******Enhancements/New Features for HPG4 (B):**
      
        * Adds support for HPE ProLiant Gen10 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-3.1
changelog:
  -      **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**
        * **Customers who already installed firmware version HPG4 do not need to update to HPG4(C).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-4.1
changelog:
  -      **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**
        * **Customers who already installed firmware version HPG4 do not need to update to HPG4(D).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-4.1
changelog:
  -      Fixed the issue of Online firmware update fails when drives are connected behind AHCI controller.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4-5.1
changelog:
  -      This firmware corrects a potential issue where the data in the reserved tracks is not properly updated, eliminating the risk of a drive not finishing the boot process on power up.  This firmware is also designed to prevent any previous firmware revisions to be loaded onto the drive, once the HPG4 firmware is downloaded.  Other maintenance fixes and updates are also included with the new firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      This firmware corrects a rare but potential data integrity issue, found in specific workloads with improperly ordered write commands or during overlapped read command processing.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      This firmware includes a fix that changes the response to "SMART READ LOG" command from 04/80/80 to 05/26/00, which prevents the drive from incorrectly reporting an error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Corrects a potential unresponsiveness during a Secure Erase operation, and fixes an incorrect error reporting issue during certain SATA protocol transfers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc...


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-4.1
changelog:
  -      Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc...


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      HPG6 introduces bug fixes, reliability enhancement and modification in SMART Attributes. Once HPG6 is downloaded, the drive cannot be changed back to an earlier firmware (eg, HPG3).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7-2.1
changelog:
  -      Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
        * Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
        * Fix NVMe drive component which shows wrong behavior message against the flash result.
        * Fix SPP force upgrade flash component problem on certain drive family.
        * High Security Enablement support FIPs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations. 
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Addresses a hot plug reporting concern
        * Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -          * Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode  is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
          * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Removes a vendor unique sense code that the controller does not handle properly.
        * Includes changes to eliminate the cause of a potential hang condition.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Fix issue with Drive Hang on Read Retry Step 50 Controller code correction - When "command aging timer expire" AND "I_T nexus loss" occurs at the same time, HDD reports sense code, 06-29-04 Sense code correction.
        * Drive may report sense 02/04/02 instead of 02/04/01 if MODE SENSE and MODE SELECT command come before drive ready.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      This firmware provides a change to the Vendor ID in the VPD page that refers to HP instead of HPE.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fixes Addressed a sustained write performance by improving the efficiency of background tasks. - Addressed a rare occurrence of a data loss issue during a sudden power event. - Addressed a rare occurrence of a Data Management Error after an interface reset when the device's Software Setting Prevention (SSP) is disabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      Fixed an issues where work load logging tasks were not properly reported.
        * Fixed an issue where temperatures below 10 degree celsius were being shown as a high temperature.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Fixed a bug which is related to SSDs returning unexpected data when drive statistics are queried and could result in server instability.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097984en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs and provide a minor performance improvement


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG4
changelog:
  -      Improves data integrity. 
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -     *Problems Fixed:**
      
        * After HDD power cycle, the Background Media Scan (BGMS) pointer would invoke a second BGMS routine starting at LBA 0, which could affect  performance until the second BGMS has completed.
        * When writing to the HDD after it entered or returned from a standby state, the potential existed for a Non Volatile Cache issue to occur..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-2.1
changelog:
  -      **Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.**
        * **Customers who already installed firmware version HPG3 do not need to update to HPG3 (B).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-2.1
changelog:
  -     *Problems Fixed:**
      
        * After HDD power cycle, the Background Media Scan (BGMS) pointer would invoke a second BGMS routine starting at LBA 0, which could affect  performance until the second BGMS has completed.
        * When writing to the HDD after it entered or returned from a standby state, the potential existed for a Non Volatile Cache issue to occur..
      
      **Problems Fixed for HPG3 (B):**
      
        * Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - "Device appears more than once in tree". The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
        * Component fails to update the firmware for drives connected behind an HP Smart Array P431 controller. Component reports the firmware update was successful. However, after a power cycle, the firmware version remains unchanged.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -     *Problems Fixed:**
      
        * This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPG5.  This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5-2.1
changelog:
  -      **Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or a ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for Proliant and Smart Update Manager.**
        * **Customers who already installed firmware version HPG5 do not need to update to HPG5 (B).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG8-2.1
changelog:
  -      This firmware updates the drive to indicate NDU compliance.
        * Fixed the issue of Online firmware update fails when drives are connected behind AHCI controller.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -      When SSD statistics are queried, erroneous drive temperatures may be reported. When this occurs, the system may encounter any of the two following conditions, leaving the server in an unstable state. 
          * Server shutdown
          * In VMware vSAN environment, storage volume taken offline.
        * For important information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00097984en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      **Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.**
        * **Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux and Microsoft Windows environments. All other OSes would require an offline update using the SPP and HP SUM.**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -     *Problems Fixed:**
      
        * This firmware improves HDD reliability when HDDs are exposed to long periods of host inactivity that exceed 1 second. HDDs may become unresponsive when using HDD firmware prior to version HPD1.  This firmware also contains a change which prevents an incorrect reassign status of a repaired sector from being logged.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -     *Problems Fixed:**
      
        * This firmware prevents asserts on a sequential write which can result in devices being lost from the configuration. It also preserves persistent reservation through downloads which prevents loss of performance.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-2.1
changelog:
  -      This firmware allows the drive to meet the requirements for Azure Stack certification. 
        * This firmware contains a change to the reported drive serial number in VPD page 80. It will now report the same as is displayed on the drive label.  Any removed characters are replaced with blank place holders so the log format will not be changed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.10
changelog:
  -      Support for AMD EPYC 9004 Series Processors.
        * Support for separate Power Domains for System and GPU based on Platform Support.
        * Incorporation of Secure Element controller on the system board for iLO to enable Transfer of Ownership. iLO6 firmware initializes and configures Secure Element with needed checks for secure transfer of ownership to OpenBMC in future.
        * IPMI changes for GPU temperature Threshold reporting.
        * iLO Redfish conformance Support - Location Indicator Active for Drive Objects.
        * iLO Redfish conformance Support - Power Subsystem and Thermal Schemas.
        * iLO Redfish conformance Support - Date Time local offset.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20
changelog:
  -      Support for Intel 4th Generation Xeon Processors.
        * Support for Intel Virtual RAID on CPU (Intel VROC).
        * Support for SPDM for increased Security with Storage and Network cards.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30
changelog:
  -      CBM Support (connect without PCID)
        * CBM Support (Nex reboot auto connect)
        * DL560 - Display multi-CPLDs revision on RBSU and iLO web
        * Gen11 MUXed CPLD updates
        * Liquid cooling support on DL560 platforms with 2 CPLDs and 2 CPUs
        * iLO to support virtual media mounts


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30
changelog:
  -      Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states.
        * Latest iLO 6 features are not supported by RIBCL or the CLI.
        * Hewlett Packard Enterprise recommends the use of the iLO RESTful API, particularly for setting the iLO security state and configuring extended user privileges.
        * The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems. 
        * The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.35
changelog:
  -         SUT hang and show "Halted system due to SPDM" during reboot stress  
          DL380G11 server is getting halted with error showing as system halted due
      to SPDM


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40
changelog:
  -      iLO enablement for new NVIDIA L40 PCIe acceletor
        * iLO enablement for new NVIDIA L4 PCIe accelerator
        * Need disk drive model stringetc for all drives in the server to be provided to COM
        * Hostname to be included in body of Redfish event
        * Enhance the update experience for PLDM Type-A components
        * Improvement on logging related to COM
        * Graceful shutdown support for COM initiated Firmware update
        * SMBIOS modification for High Bandwidth Memory (Intel Xeon CPU Max Series)
        * Supportability Improvement for DIAG Secure Element
        * Granular enable/disable of SNMP V1/V3 version
        * Pending reset flag support for COM initiated Firmware Update
        * Cloud based management enhancements for simplified onboarding
        * MCTP Device handling for FLR and BDF changes runtime for AMD
        * Display DA Drives when the VROC OOB driver is not available in ESXi
        * Enable/Disable IPMI KCS Interface through Redfish API


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40
changelog:
  -      Fixed IPMI SSIF MultiPart Command Failure issue (This enables IPMI utilities on ProLiant RL300 Gen 11 to use the SSIF interface for in-band management)
        * Fixed DIMM temperature reading data issue
        * Fixed The Firmware Update Operation Fail Through OneView for ME issue.
        * Fixed RDE VAS Reports Stack Memory Usage of 96%
        * Fixed the issue of Firmware flash fails during system reboots.
        * Fixed the issue of iLO Recovery from FTP not working
        * Fixed the issue of Hostname property & value missing in most of the REST events logged in Listener.
        * Fixed the issue of iLO UI/REST interfaces inaccessible when attempt to create event subscription during server POST complete.
        * Fixed the issue of Server state is Unmanaged in OV.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.41
changelog:
  -     iLO 6 v1.41 has the same content or feature set as iLO6 1.40 plus an
      additional fix for COM (Compute Ops Management) related to COM4VC bundle
      update message and event. The additional COM related fix is NOT applicable to
      other regular use case scenarios. Hence upgrading to iLO6 v1.41 is optional


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.41
changelog:
  -     Fix provided to have synchronous messages to reflect the status, to Compute
      Ops Management, after completion of server reset during bundle update in
      COM4VC use case scenario.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.43
changelog:
  -      Enablement for Edgeline e930t server platform attributes
        * Fix provided for Secure boot certificate enrollment issue
        * Fix for iLO communication with chassis controller causing instability


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.45
changelog:
  -      Redfish APIs for iLO, System TPM measurement and SPDM capable option cards measurements. 
          * System TPM measurements are currently supported only on Intel and AMD platforms
          * Install TPM version 1.512 to use for System TPM measurements
        * Supported BIOS versions are Intel U54 v2.10 or later and AMD A55 v1.40 or later
        * Support for Universal Backplane Management Version 7
        * Added support for MCTP Device handling for FLR and BDF changes at runtime.
        * Added support to enable and disable IPMI KCS interface through iLO web interface and iLO Redfish API


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.45
changelog:
  -      Performance issue for Inband IPMI commands over SSIF interface (needs system ROM v1.40)
        * DL380 Gen11 binding vfio-pci driver to Intel E810 NIC causes iLO health monitoring failure
        * Schema Errors reported under /redfish/v1/ComponentIntegrity/
        * Incorrect Tasks status is shown when Redfish delete volume with Long Running Test
        * EDSFF NVMe SPDM Auth fails with iLO 6 1.40 Pass 6/7 Build with error as  (reason Unable to verify Signature)
        * Compute Ops Management for VCenter Reset task is added as BootUEFI(Graceful Shutdown) in the iLO Queue
        * BootToUefi(Graceful Shutdown) is added as Pending Reset task in the iLO Queue
        * During Bundle update one of the component f/w update fails
        * CPU Utilization graph is not updating when CPU is stressed.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50
changelog:
  -      Added capability in iLO for Two Factor Authentication using OTP (One Time Password) for Microsoft AD users
        * To display drive enclosure info in Firmware tab in iLO
        * Support for controller which goes for functional reset runtime
        * iLO to mark the correct component update status for runtime agent updatable components based on the update status and update result
        * Secure erase of data based on the usecase (customer, factory or openbmc ownership transfer)
        * iLO Support to Reduce AMD Bootup Delay. Reduce the delay by saving the memory trained data to specific location in BIOS SPI memory
        * iLO stops the bundle update in the scenario where BootToUefi task goes to exception to ensure Graceful shutdown of server
        * iLO Support for OBSE in factory mode without the need for Advance License
        * iLO will display Intel CFR Version in Process Information Page


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50
changelog:
  -      OEM iLO component does not show the OEM equivalent entry for Intelligent Provision in One Time Boot Option
        * Handling delayed device discovered in UEFI mode during discovery phase
        * Persist the KCS interface setting across iLO reboots
        * Capability to enable KCS interface setting without needing a factory reset


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.51
changelog:
  -      Support for LocationIndicatorActive LED for NVMe drive when it is configured behind VROC controller
        * Support for StatusIndicator LED for NVMe drive when it is configured behind VROC controller
        * Support for telemetry streaming using Redfish event subscription


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.51
changelog:
  -      Incorrect reporting of the firmware version of Intel NVMe drives
        * Bundle update issue in case of file download failure for HPE GreenLake Compute Ops Management
        * iLO Two-Factor authentication login fails when AD user login name is used as username for iLO Login instead of AD user display name
        * Incorrect reporting of the Nic card port status from IPMI SDR list
        * Fixing HPE GreenLake Compute Ops Management retry logic to address HPE GreenLake Compute Ops Management status was changing from Connection in progress to Connection failed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.52
changelog:
  -      iLO needs to provide IPv4 address for RDE enabled NIC
        * NVIDIA L40S needs to be enabled on HPE Servers (Gen11, Gen10 Plus)
        * iLO enablement for Intel Ponte Vecchio (PVC) for accelerator manageability and supportability
        * Reduce EDSFF power consumption using NVMe Power States feature
        * iLO enhancements to support SMBIOS 3.86 spec (type 197 and 242)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.52
changelog:
  -      Increased the maximum boot order to 512 as specified by UEFI EV specification
        * Incorrect sensor values for some sub-components in IPMI response
        * The "Ignore" option for the "Global Component Integrity" security parameter in the iLO Security Dashboard gets automatically disabled
        * The discrepancy between M.2 Slot Name with Redfish URI and iLO GUI is removed. The product name getting from backend will be displayed in redfish and UI as well
        * Enforced a limit of 14 bytes for DHCP v4 clientId. An error response of "400 - Bad Request" will be observed if the length is beyond 14 characters
        * Removal of duplicate sensor entries from IPMI response
        * UefiDevicePath length increased from 256 bytes to 1024 bytes


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.53
changelog:
  -      Added support for Qualcomm X100
        * Added enhanced support to iLO firmware to report additional description about the components for HPE GreenLake Compute Ops Management initiated firmware bundle update
        * Added support to enable or disable User Accounts through Redfish and iLO web interface
        * In-band IPMI support for HPE ProLiant RL300 Gen11 servers (RHEL 8.6)
        * For PLDM components, added support to selectively update the target devices on the system through Install Sets and Task Queue


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.53
changelog:
  -      Fixed CloudConnect retry logic to reconnect to iLO once connectivity is resumed
        * Fixed the auto-connect issue if the HPE GreenLake Compute Ops Management (COM) was disabled due to a no-retry


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.54
changelog:
  -      Gracefully handle multiple boot to UEFI commands in installset
        * Provide update statistics via Redfish for firmware bundle update
        * Redfish includes direct attach backplane in chassis collection
        * Redfish includes downstream backplane in chassis collection
        * Providing granular control on Security Parameters present on Security Dashboard
        * Intel VROC 8.2 support
        * Basic enablement of NVIDIA H100 94GB GPU


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.54
changelog:
  -      Fix has been implemented to show right data in redfish, which includes to suppress additional SetObject name when adapter provides expanded data for GET operation in RDE
        * Excessive event issue is fixed when RDE and DCi coexist on the system on iLO 5 and iLO 6
        * iLO Login page shows the Server as Managed by HPE OneView when actually the Server is in Monitored mode


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.55
changelog:
  -      OpenSSL v1.0.2 in iLO FW is patched with Extended Master Secret support for TLS1.2
        * Updated the Eventing mechanism for State Transitions for Security Parameters for Security Dashboard
        * Boot time reduction on HPE ProLiant AMD based Gen11 systems by enabling support for BIOS eMCR feature
        * Redfish includes direct attach backplane in Fabric collection
        * Redfish schema amendments for DMTF compliance
        * Support for Prescott NDR200 IB/200G Ethernet dual-port QSFP112 adapter
        * Support for Intel Emerald Rapids and Sapphire Rapids EE LCC


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.55
changelog:
  -      Slowness due to continuously polling on timer expiry leading to increased CPU utilization
        * Added timestamp register call before iLO starts VSP logging to file to fix iLO VSP locks-up after an iLO reset if there is output displayed during the iLO reset
        * Firmware update fails through iLO web interface due to loss of network connectivity to iLO. You can now retry after 5 minutes when the network connectivity with iLO is restored
        * Existing subscriptions with HPE GreenLake for Compute Ops Management and HPE OneView is corrupt after upgrade to iLO 6 v1.54
        * PSU firmware upgrade flashing failure for Titanium PSUs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.56
changelog:
  -      Addition of new SNMP trap (id# 6146) and Redfish event for runtime Mezzanine card failures on Synergy servers
        * Implemented Reconnect button in iLO UI for enabling customers to manually reconnect to HPE GreenLake for Compute Ops Management
        * In-band IPMI support for SLES 15 operating system on RL300 platforms
        * Configuration to allow disabling/enabling all weak ciphers and key lengths for SSH and TLS interfaces in Production security mode


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.57
changelog:
  -      iLO utilities, HPQLOCFG and HPLOMIG supports TLS 1.3 connections starting v6.1.0
        * OpenSSL upgraded from v1.0.2 to v3.0.12
        * Support for TLS1.3 has been added
        * Support for BlueField-3 DPU Model B3220 has been added
        * Storage Page enhanced to display storage enclosure, switch and port information in the topology


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.57
changelog:
  -      Fix for incorrect temperature sensor values and sensor indices reported by iLO SNMP interface
        * Fix for inconsistent physical drive status reported by iLO SNMP interface as compared with iLO GUI or Redfish interfaces
        * Support added for sending iLO AlertMail with TLS enabled, in conformance with RFC3207
        * Fix for configuring one time boot options via in-band and out-of-band IPMI methods
        * Fix for Web User interface being rendered inaccessible after the storage tab is clicked, in a server with large number of drives


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.58
changelog:
  -     For accessing drive temperature threshold data, the order will be MCTP over
      PCIe VDM as primary, MCTP over SMBUS as secondary and SMBUS 0x36 as last
      resort.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.59
changelog:
  -     1\. Support for Simplified Onboarding of HPE iLO to Compute Ops Management
      using an Activation Key.  
      2\. Support for consistent URIs (indexes) under Ethernet interfaces for
      systems in Gen 11 servers at all times.  
      3\. Ability to switch from DHCP6 to static IPv6 address for the same IP
      address.  
      4\. Pre-enablement of Qualcomm A100 Ultra Card limited to discovery and
      thermal monitoring.  
      5\. Added Cipher #17 for IPMI over LAN and removed Cipher #0 and Cipher #1
      with security issues.  
      6\. Ability for HPE iLO 6 to monitor Closed-Loop Liquid Cooling devices after
      the POST call completion.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.59
changelog:
  -     1\. Fixed an issue where the VSP used to get cleared upon an iLO reboot or an
      AUX server cycle.  
      2\. Fixed an issue where SMBIOS data file present in NAND is removed and
      recreated every time server reboots.  
      3\. Fixed an issue where the URI for TlsConfig was incorrect in the HPE iLO 6
      Redfish documentation.  
      4\. Fixed an issue where physical drive status was reported incorrectly in
      SNMP.  
      5\. Fixed an issue of invalid values for SNMP OIDs during SNMPWALK.  
      6\. Fixed an issue where while entering an incorrect HPE iLO password on a
      server in Edgeline EL8000t chassis displayed an improper error message.  
      7\. Fixed an issue where the IPMI power supply status showed a failure
      detected in empty bays on Apollo servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60
changelog:
  -     1. Support for Titanium PSU upgrade for 2200W PSUs.
        2. Support for Fan speed in terms of percentage from SNMP OID Get and Walk.
        3. Support for discovery and thermal monitoring of NVIDIA L20 accelerator card.
        4. Support for Active Directory Log in for group sizes larger than 300 and up to 800.
        5. Support for Floating Values in Redfish as per DMTF specification.
        6. Support for minimum15 concurrent sessions per user for each interface.
        7. Support for BlueField-3 DPU Model B3220.
        8. Support for HPE InfiniBand NDR/Ethernet 400Gb 1-port OSFP PCIe5 x16 MCX75310AAS-NEAT Adapter (P45641-B23/ P45641-H23).
        9. Support for HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter (P45642-B22/ P45642-H22).
        10. Fixes for specific SNMP OIDs for RDE capable storage controllers for controller, physical drive, and logical drive properties.
        11. Enhancements to network stack to support the USGv6 requirements.
        12. Introduction of a Redfish property to enable or disable the RFC 7217 support in HPE iLO. By default, it is disabled. When enabled, this property changes the IPv6 SLAAC addresses of HPE iLO from EUI-64 format to the RFC format. For more information, see the HPE iLO Redfish documentation.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60
changelog:
  -     1. Fixed an issue with the sensor index suffix in SNMP sensor name OIDs.
        2. Fixed an issue where, while updating the One Time Boot option to PXE boot device, the UEFI optimized boot mode was getting set to a disabled state.
        3. Fixed an issue where LDAP mode used to get disabled due to version and size mismatch.
        4. Fixed an issue where HTTP calls to Rest server (through a web server) to create installset, initiate installset, and read installset was unstable leading to failure in BundleUpdate.
        5. Fixed an issue where data from Redfish when appended with available data, use to generate unexpected data.
        6. Fixed an issue where ME was sending the wrong peci command code in response.
        7. Fixed an issue for Embedded ALOM and for other cards where the indexes were automatically assigned.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.61
changelog:
  -      Fixed the offline firmware update failure through SPP and missing the
      inventory of hard drives.
      
       Fixed the Uncorrectable Machine Check Exception (UMCE) and server start when
      HPE iLO reset is triggered.
      
       Fixed an issue where in a maximum configuration MR controller, the
      downstream UBM, and drives do not get listed in the device inventory or
      storage in HPE iLO.
      
       Fixed an issue where ME was sending the wrong peci command code in response.
      
       Fixed an issue with the sensor index suffix in SNMP sensor name OIDs.
      
       Fixed an issue where, while updating the One Time Boot option to PXE boot
      device, the UEFI optimized boot mode was getting set to a disabled state.
      
       Fixed an issue where LDAP mode used to get disabled due to version and size
      mismatch.
      
       Fixed an issue where HTTP calls to Rest server (through a web server) to
      create installset, initiate installset, and read installset was unstable
      leading to failure in BundleUpdate.
      
       Fixed an issue where data from Redfish when appended with available data,
      use to generate unexpected data.
      
       Fixed an issue for Embedded ALOM and for other cards where the indexes were
      automatically assigned.
      
       Fixed an issue where Edgeline servers could display an impossibly high
      chassis power reading, which was determined to be invalid.
      
       Fixed an issue where if a shared network port is not configured,
      SharedNetworkPortOptions property under URI
      /redfish/v1/Managers/1/EthernetInterfaces/2 was hidden. This will now be
      present and will display SharedNetworkPortOptions.NIC as Disabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.28.60
changelog:
  -     This product now supports the following network adapters:
      
        * Broadcom BCM5719 Ethernet 1Gb 4-port Base-T Adapter for HPE
        * Broadcom BCM5719 Ethernet 1Gb 4-port Base-T OCP3 Adapter for HPE


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.31.0
changelog:
  -     This product addresses an issue the adjustment of firmware read-write commands
      on corresponding OS.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.32.3
changelog:
  -     This product correct an issue which the Boot Code Version of the Firmware did
      not get updated after upgrading the Firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.33.3
changelog:
  -      This product removes CCM(Comprehensive Configuration Management) for the legacy driver.
        * This product adds to support HPE MicroServer Gen11


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.33.3
changelog:
  -      This product fixes the intermittent issue of displaying incorrect device status under iLO web
        * This product fixes the intermittent lost iLO connection with shared networking mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.1
changelog:
  -      This product addressed a problem where Reboot Required option was not set after doing firmware update under RBSU.
        * This product addressed the disconnection with iLO after switching to Shared Network mode on BCM5719 OCP3 adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.50
changelog:
  -     This product addresses an issue where the FAN behavior with installed BCM 5719
      1Gb 4p BASE-T OCP Adptr.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.70
changelog:
  -     This product addresses an issue where network loses IP Address Randomly during
      AC/DC cycle and idling.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -      This product addressed abnormal fan behavior when BCM5719 OCP3 installed.
        * This product addressed the failure of IP dispatch when using BCM5719 LOM as shared iLO networking.
        * This product addressed that platform might encounter a POST failure when NX1-based controllers and some storage controllers combines.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.37.0
changelog:
  -      This product fixed error checking sequence for Firmware Management Protocol API.
        * This product fixed NC-SI commands to interoperate more benefit with iLO.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20.11
changelog:
  -      This product now supports SUSE Linux Enterprise Server 12 SP5.
        * This product now supports HPE ProLiant MicroServer Gen10 Plus and HPE ProLiant XL225n Gen10 Plus.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.21.5
changelog:
  -     This product now supports the following network adapters:
      
        * Intel X710-DA2 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE
        * Intel X710-DA2 Ethernet 10Gb 2-port SFP+ Adapter for HPE


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22.11
changelog:
  -      This product now supports SUSE Linux Enterprise Server 15 SP2.
        * This product now supports Red Hat Enterprise Linux 8, Update 2 and Update 3.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22.55
changelog:
  -     This product addresses an link issue for Intel X710-DA2 Ethernet 10Gb 2-port
      SFP+ OCP3 Adapter for HPE.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.5
changelog:
  -     This product now supports Red Hat Enterprise Linux 8 update 4 and SUSE Linux
      Enterprise Server 15 Service Pack 3


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.50
changelog:
  -      This product addresses an issue where the incorrect translation is seen with Intel Intel I350-T4 Ethernet 1Gb 4-port BASE-T  Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.4
changelog:
  -     This product addresses an issue where the adaters isn't recongized with HPE
      Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2  Adapter and HPE Ethernet 10Gb 2-port
      SFP+ X710-DA2 Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30.0
changelog:
  -      This product now supports Red Hat Enterprise Linux 9 Update 3.
        * For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/download/19622/


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.12_11-24-2022
changelog:
  -     This revision of the System ROM improves the system boot time when Restoring
      Default Manufacturing Settings.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.12_11-24-2022
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the AMD
      reference code for AMD 4th Generation EPYC processors which addresses an issue
      of potential over voltage condition early in the boot sequence. This issue is
      not unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_01-06-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 4th Generation EPYC processors.
      
      Addressed an issue where SMBIOS Type17 memory width showed non-zero for an
      empty DIMM slot.
      
      Addressed an issue where system would RSOD if DesiredBootDevice was set but
      not matched with any boot option.
      
      Addressed an issue where the POST progress bar was shown in the wrong
      position.
      
      Addressed an issue where AGESA PI version did not show in SMBIOS type40.
      
      Corrected Ext Maximum Memory value in SMBIOS entry.
      
      Removed Boot Mode Option from BIOS/Platform Configuration (RBSU) Menu.
      
      Removed unsupported Enhanced Processor Performance Profile from BIOS/Platform
      Configuration (RBSU) Menu.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22_01-19-2023
changelog:
  -     Add new System Configuration (RBSU) configuration options that allow
      controlling the processor's P0 (maximum) frequency. This includes the "Custom
      Pstate0" option with settings of "Auto" (default) and "Manual" and the
      "Pstate0 Frequency(MHz)" option that allows setting the P0 frequency. When the
      "Custom Pstate0" option is configured for "Manual", the value of the "Pstate0
      Frequency(MHz)" is used for the processor's P0 frequency. When the "Custom
      Pstate0" option is configured for "Auto", the processor uses its normal,
      maximum P0 frequency and the "Pstate0 Frequency(MHz)" option is not
      configurable. In System Configuration (RBSU), these options are located under
      the BIOS/Processor Options. This setting has the following Redfish properties:
      /redfish/v1/systems/1/bios/settings/CustomPstate0
      /redfish/v1/systems/1/bios/settings/Pstate0Frequency
      
      Remove the System Configuration (RBSU) option for "Memory Interleaving Mode".
      This option is no longer configurable because AMD recommends always enabling
      this capability for maximum performance. Memory Interleaving will always be
      enabled with this revision or later of the System ROM no matter how this
      option had been previously configured. In System Configuration (RBSU), this
      option had previously been located under the Memory Options. This setting had
      the following Redfish properties:
      /redfish/v1/systems/1/bios/settings/AmdMemoryInterleaving


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22_01-19-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang at POST during TPM measurement after
      restoring manufacturing defaults.
      
      Address an issue where the RegistryVersion format in the URI
      redfish/v1/registrystore/registries did not follow the Redfish Specification.
      If scripts were written to conform with the incorrect format in previous
      System ROMs, those scripts may need to be modified to follow the correct,
      Redfish compliant format which is implemented in this System ROM revision and
      later.
      
      Addressed an issue where the System Configuration (RBSU) option "Access
      Control Service" did not disable PCIe Access Control Service when it's set to
      disabled.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_03-06-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 4thGeneration EPYC processors.
      
      This revision of the System ROM updates zlib to 1.2.13 which provides
      mitigation for BIOS security vulnerability documented as CVE-2022-37434
      (https://nvd.nist.gov/vuln/detail/CVE-2022-37434). This security vulnerability
      is documented in the CVE report site.
      
      This revision of the System ROM includes the v1.1.1s openSSL which provides
      mitigation for BIOS security vulnerability documented as CVE-2022-2097
      (https://nvd.nist.gov/vuln/detail/CVE-2022-2097). This security vulnerability
      is documented in the CVE report site.
      
      Addressed an issue where some Chinese translation is missing from RBSU.
      
      Addressed an issue where some Japanese translation is missing from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_05-29-2023
changelog:
  -     Reduced system boot time.
      
      Improved the description of Unsupported DIMM Configuration in the Integrated
      Management Log (IML) and POST error message.
      
      Added support for AMD 4th Generation EPYC 9754/9734 Processors.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_05-29-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.7
      for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.7
      for AMD 4th Generation EPYC processors.
      
      Addressed an issue where SMBIOS Type 199 did not have Microcode patch
      information.
      
      Addressed an issue where the xGMI link speed information was not shown on the
      POST screen.
      
      Addressed an issue where NVME drives would require a re-scan after hot-
      add/remove on Windows 2019.
      
      Addressed an issue where the Windows ipmiutil tool may encounter an
      unspecified error.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_07-12-2023
changelog:
  -     Removed "NUMA memory domains per socket" selection item "Auto" from RBSU,
      because value of Auto option is actually set to one memory domain per socket.
      Set display default to "One memory domain per socket".
      
      Added "NVMe PCIe Resource Padding" option under "Advanced PCIe Configuration"
      in RBSU. The option is for fixing a failure to hot add NVMe drive to empty
      slot under OSes such as VMware. The option can be set from Redfish URI
      "/redfish/v1/systems/1/bios/settings/" with property "PciResourcePadding".


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_07-12-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.8
      RC3 for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for and security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where the unsupported DIMM population IML will report an
      incorrect processor number on dual-processor systems.
      
      Addressed an issue where the SMBIOS type 197 might contain an incorrect format
      value of xGMI speed.
      
      Addressed an issue where the CXL root bridge was missing from SMBIOS type 9.
      
      Addressed an issue where dmidecode indicates 4 power supplies are installed
      when only 2 power supplies are actually installed.
      
      Addressed an issue where number of "Internal L3 cache" displayed under RBSU
      information page is not correct.
      
      Addressed an issue where the System Health LED is illuminated Red for all
      memory configuration error cases.  Some memory configuration error cases are
      not critical and should have the System Health LED illuminated Amber.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.42_08-16-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Address an issue that can result in a Red Screen of Death (RSOD) and hang
      during system boot or a hang during system boot without an RSOD. This issue
      can occur on systems utilizing the v1.32 or v1.40 System ROM revision and iLO
      Firmware revision v1.50. The v1.32 System ROM added a boot-time reduction
      capability (which also required iLO Firmware revision v1.50) which resulted in
      the boot-time RSOD and/or hang. This capability has been removed in this
      revision of the System ROM.
      
      Addressed an issue where one-time boot did not work properly after setting
      one-time boot device from iLO web or via Redfish.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50_10-04-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.9
      for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system might be repeatedly rebooting due to PCI bus
      reallocation feature.
      
      Addressed an issue where secure boot key would not be set to default when
      perform manufacturing default from iLO web.
      
      Addressed an issue where EDSFF form factor would be displayed as "unknown" in
      SMBIOS type 242.
      
      Addressed an issue where system might hang since BIOS might fail to access iLO
      resource.
      
      Addressed an issue where system might hang when accessing devices attached on
      the switch board (SWB).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.54_11-02-2023
changelog:
  -     Added new Microsoft secure boot keys, KEK2023, Microsoft UEFI CA 2023 and
      Windows UEFI CA 2023, since the original keys will expire in 2026.
      
      When the RBSU knob "Trusted Platform Module Options\Advanced Trusted Platform
      Module Options\TPM Visibility" was changed from "Hidden" to "Visible", RBSU
      knobs "TPM 2.0 Endorsement Hierachy" and "TPM 2.0 Storage Hierachy" would be
      set to "Enabled" automatically. Therefore, the BitLocker Recovery Console
      prompt would not appear when booting to Windows after changing TPM back to
      visible if Bitlocker was already enabled on OS.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.54_11-02-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.A
      for AMD 4th Generation EPYC processors. This revision of the System ROM
      updates OpenSSL to 1.1.1v which provides mitigation for BIOS security
      vulnerability documented as CVE-2023-3817.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where iLO device did not present in Windows system
      management devices, and results in iLO related service failure when embedded
      video is disabled from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.56_12-08-2023
changelog:
  -     Added a system boot-time reduction System Configuration (RBSU) option "System
      Options/Boot Time Optimizations/AMD eMCR Boot-Time Reduction" and set to
      "Enabled" by default. This function required iLO firmware revision 1.55 to
      take effect. This setting has the following Redfish properties:
      
      /redfish/v1/systems/1/bios/settings/AmdEmcr


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.56_12-08-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Greyed out the System Configuration (RBSU) option "System Options/Boot Time
      Optimizations/Extended Memory Test" since it is not supported on HPE
      DL325/345/365/385 Gen11 servers.
      
      Greyed out the System Configuration (RBSU) option "Memory Options/Memory
      PStates" since it is not supported on HPE DL325/345/365/385 Gen11 servers.
      
      Addressed an issue where SMBIOS type 9 Designation showed an incorrect string
      when an OCP retimer card was installed.
      
      Addressed an issue that can result in a system hang while loading defaults
      when a user default was saved before.
      
      Addressed an issue where system memory training failed with certain DIMMs.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.58_01-04-2024
changelog:
  -     Added the System Configuration (RBSU) option "Boot Options/UEFI Boot
      Settings/Filter Non-bootable Drives" and set to "Auto" by default. This
      setting has the following Redfish property:
      
      /redfish/v1/systems/1/bios/settings/FilterNonbootableDrive


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.58_01-04-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.B
      for AMD 4th Generation EPYC processors. This revision provides AMD's
      mitigation for security vulnerabilities for CVE-2023-31346 and CVE-2023-31347
      for AMD 4th Generation EPYC processors. This security vulnerability is
      documented in the CVE report site. This issue is not unique to HPE servers.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Greyed out the System Configuration (RBSU) options "PCIe Device
      Configuration/Advanced PCIe Configuration/PCIe Bifurcation Options/PCIe Slot
      21/22 Bifurcation" since it is not supported on HPE DL325/345/365/385 Gen11
      servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60_03-21-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2023-45853, CVE-2022-36763 and CVE-2022-36764. This revision
      of the System ROM includes the mitigation for vulnerabilities documented as
      CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where System Configuration System Configuration (RBSU) knob
      "PCI Device Config\PCIe Data Link Feature\Slot 21/22 PCIe Data Link Feature
      Exchange" cannot be disabled.
      
      Addressed an issue where System Configuration (RBSU) knob "Power and
      Performance Options\AMD Core Performance Boost" cannot be disabled.
      
      Corrected the PCIe slot number for NS204i-u.
      
      Corrected SATA port numbers in System Configuration (RBSU).
      
      Corrected SATA HDD location in One-Time Boot Menu.
      
      Addressed an issue where the boot order of NVMe drives cannot be changed.
      
      Addressed an issue where the OS could not detect the iSCSI drive through IPv6
      installation when iSCSI IpAddressType is set to auto,
      
      Addressed an issue where system boot slowly with Intel E810 NIC.
      
      Added help string for System Configuration (RBSU) knob "Power and Performance
      Options\Advanced Power Options\Infinity Fabric Performance State"
      
      Addressed an issue where the PCR7 value might be changed randomly on every
      boot.
      
      Addressed an issue where Redfish resource was not updated after deleting
      secure boot keys via System Configuration (RBSU).
      
      Addressed an issue where the system failed to enroll certificate to PK and KEK
      via Redfish.
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2023-45853, CVE-2022-36763 and CVE-2022-36764.
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.62_05-22-2024
changelog:
  -     Displayed "Last Power Down Reason" in POST messages.
      
      Removed unsupported System Configuration (RBSU) option "Memory Options/AMD
      Periodic Directory Rinse".
      
      Added the System Configuration (RBSU) option "Processor Options/AMD Periodic
      Directory Rinse Tuning" and set to "Auto" by default. This setting has the
      following Redfish property:
      
      /redfish/v1/systems/1/bios/settings/AmdPeriodicDirectoryRinseTuning


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.62_05-22-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.C
      for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang while enrolling secure boot key dbr
      certificate via Redfish API.
      
      Addressed an issue where system failed to boot with selected NVMe HDD by
      setting One-Time Boot Option in ILO Web.
      
      Addressed an issue where TPM PCR0 value might change after changing some
      System Configuration (RBSU) options
      
      Addressed an issue where the boot order was cleared unexpectedly after
      configuring System Configuration (RBSU) options and navigating to Boot Options
      > UEFI Boot Settings > UEFI Boot Order then pressing F12 to Save and Exit.
      
      Removed the value "Not Specified" in System Configuration (RBSU) option
      "Server Security/Trusted Platform Module Optioins/Current TPM 2.0 Active PCRs"
      and set the default value as "SHA1 and SHA256"
      
      **Known Issues:**
      
      System may encounter boot failure or become unstable after downgrading system
      ROM to 1.60 or older versions. It is not recommended to downgrade system ROM
      to an older version or apply default system settings after downgrading if
      needed.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.64_06-19-2024
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where TPM PCR0 value might be changed if PCIE riser
      configuration is changed.
      
      Addressed an issue where PCIE Link speed may remain in Gen1 if F12 - Save and
      Exit was not pressed after configuring max PCIE speed to per port control.
      
      Addressed an issue where system may encounter a RSOD while updating SAS drive
      FW via HPE Service Packs, including, but not limited to, VMware ESXi Online
      HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02
      (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July
      2024).
      
      Addressed an issue where some settings in RBSU may not restore to default
      after applying "Restore Default Manufacturing Settings".
      
      Addressed an issue where the RBSU/Firmware update shows "Flash successfully"
      message when incorrect SATA firmware was loaded for upgrade.
      
      Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword
      were not working.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_01-06-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 4th Generation EPYC processors.
      
      Addressed an issue where SMBIOS Type17 memory width showed non-zero for empty
      DIMM slot.
      
      Addressed an issue where system would RSOD if DesiredBootDevice was set but
      not matched with any boot option.
      
      Addressed an issue where POST progress bar was shown in the wrong position.
      
      Addressed an issue where AGESA PI version did not show in SMBIOS type40.
      
      Corrected Ext Maximum Memory value in SMBIOS entry.
      
      Removed Boot Mode Option from BIOS/Platform Configuration (RBSU) Menu.
      
      Removed unsupported Enhanced Processor Performance Profile from BIOS/Platform
      Configuration (RBSU) Menu.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_07-12-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.8
      for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for and security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where the unsupported DIMM population IML will report an
      incorrect processor number on dual-processor systems.
      
      Addressed an issue where the SMBIOS type 197 might contain an incorrect format
      value of xGMI speed.
      
      Addressed an issue where the CXL root bridge was missing from SMBIOS type 9.
      
      Addressed an issue where dmidecode indicates 4 power supplies are installed
      when only 2 power supplies are actually installed.
      
      Addressed an issue where number of "Internal L3 cache" displayed under RBSU
      information page is not correct.
      
      Addressed an issue where the System Health LED is illuminated Red for all
      memory configuration error cases. Some memory configuration error cases are
      not critical and should have the System Health LED illuminated Amber.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22_01-18-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial version of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.24_03-03-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added capability to support 4th Gen Intel Xeon Scalable Processors MCC.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_03-01-2023
changelog:
  -     Added capability to support 4th Gen Intel Xeon Scalable Processors 4S.
      
      Enhanced PCI information in Active Health System log.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_03-01-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Always Power On function would remain off when
      factory defaults are loaded.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_03-23-2023
changelog:
  -     Enhanced error reporting function for Intel Xeon Max Series.
      
      Enhanced Power and Performance Options in ROM-Based Setup Utility.
      
      Added a new feature to support customized iPXE image.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_03-23-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where EDSFF drive was not detected intermittently when system
      started.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_06-29-2023
changelog:
  -     Added support for Agentless Attestation. This security capability allows
      detecting potentially malicious changes to the system by obtaining system
      measurements (which include firmware revisions, configuration settings, and
      the hardware configuration) via the Redfish API.
      
      Added segment value in PCI addresses under RBSU PCI device information.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_06-29-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where a drive cannot be unmounted after hot-plug
      interruption during DPC (Downstream Port Containment) recovery process under
      VMware.
      
      Addressed an issue where Citrix HyperVisor could not be installed.
      
      Addressed an issue where the system would hang in POST if Intel UPI link
      enablement was set to single link operation.
      
      Addressed an issue where the SMBIOS type 38 offset 0x10 had an incorrect
      value.
      
      Addressed an issue where the erase status for SATA drives is reported
      incorrectly when using One Button Secure Erase.
      
      Addressed an issue where location information under RBSU "Storage Device
      Information" page will show "null string" when VROC is enabled.
      
      Addressed an issue where the "Minimum Processor Idle Power Core C-state" from
      RBSU showed an incorrect value when one of "Virtualization - Max Performance",
      "Low Latency", "Transactional Application Processing", "High Performance
      Compute (HPC)" workload profiles is selected.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages were
      not synchronized.
      
      Addressed an issue where an incorrect "processor's PUcode" version showed up
      on screen during the POST after downgrading the System ROM.
      
      Addressed an issue where status display of PCIe Root Complex for Intel Quick
      Assist Technology (Intel QAT) is not correct in Windows Device Manger on dual-
      processor systems.
      
      Addressed an issue where the PCI speed might be incorrect when setting
      "Maximum PCI Express Speed" to "Per Port Control".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.44_07-31-2023
changelog:
  -     Set the value of the Snoop Response Hold Off for IOAT Stack setting to 7 when
      the vRAN Workload Profile has been selected. This aligns with Intel's
      performance tuning recommendation.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.44_07-31-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Address an issue with some 4th Generation Intel Xeon Processors that can
      result in an unexpected reset with a machine check error logged to the
      Integrated Management Log (IML).  This issue is not unique to HPE systems.
      The following is Intel's description of the issue:  "Under complex
      microarchitectural conditions, the processor may experience a Caching Home
      Agent Table of Requests (TOR) timeout machine check exception."  This version
      of the System ROM will update internal processor firmware during boot.  This
      internal processor firmware cannot be downgraded even if the System ROM is
      downgraded. Using processors with different version of internal firmware is
      not supported.
      
      Addressed an issue where the speed of Kioxia EDSFF drive might be downgraded
      from PCIe Generation 5 to Generation 4.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.46_09-26-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the MegaRAID controller status is displayed as
      "unknown" on the iLO web page.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.48_10-19-2023
changelog:
  -     Replaced "AC power" with "external power" in the help text of "Automatic
      power-on" option. This is due to ProLiant server also provides the DC power
      supply option.
      
      Added new Microsoft secure boot keys, KEK2023, Microsoft UEFI CA 2023 and
      Windows UEFI CA 2023, since the original keys will expire in 2026.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.48_10-19-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system might hang with SRIS of CPU PCIe port enabled.
      
      Addressed an issue where iLO web would not display the PCIe device installed
      on Slot 8 when the configuration includes a tertiary riser and Slot 8 is PCI
      Express x8.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_11-28-2023
changelog:
  -     Added support for the 5th Gen Intel Xeon Scalable Processors.
      
      Added Maximum Memory Bus frequency support to 5600 MT/s for the 5th Gen Intel
      Xeon Scalable Processors.
      
      Added support for NVMe over Fabrics.
      
      Added new System Configuration (RBSU) configuration options that allow the
      system not to create boot options for non-bootable fixed drive.
      
      Modified System Configuration (RBSU) configuration options that support new
      license SKU "RAID1 Only" and drop "Standard" SKU for Intel VROC.
      
      Enhanced the warning messages of "Embedded SATA Configuration" options in
      RBSU.
      
      Enhanced the warning messages of "Intel CPU VMD Support" options in RBSU.
      
      Added new System Configuration (RBSU) configuration options that could control
      Intel Trust Domain Extension (TDX) functions.
      
      Added new System Configuration (RBSU) configuration options that could control
      the NVMe-oF Software Initiator.
      
      Added new System Configuration (RBSU) configuration options that could control
      the PCI-E Data Link Feature Exchange.
      
      Added new System Configuration (RBSU) configuration options that allow Power
      Supply Unit fan control.
      
      Enhanced the help message for System Configuration (RBSU) configuration
      options for Automatic Power-On.
      
      Enhanced the help message and status information for System Configuration
      (RBSU) configuration options for HBM Memory Mode.
      
      Updated the Processor Capability Indicator in SMBIOS type 197.
      
      Enhanced POST messages in situations where where unsupported processors are
      installed.
      
      Added PCIe Gen2 device in SMBIOS type 9.
      
      Enhanced SMBIOS type 9 for PCIe retimer device information.
      
      Displayed the information of first device in SMBIOS type 203 when the PCI slot
      is bifurcated.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_11-28-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where system would reboot when hot-added NVMe drives in Linux
      with Intel VMD Support enabled.
      
      Fixed an issue where SMBIOS type 219 showed incorrect feature flags when the
      Intel Xeon CPU Max Series processors are installed.
      
      Fixed an issue where PCIe fatal error reporting function did not respond
      correctly.
      
      Fixed an issue where Intel TSX Support could not be set with enabled state.
      
      Fixed an issue where the x2APIC is not enabled for 64-core processors.
      
      Fixed an issue where the PCIe correctable error message was not displayed in
      Integrated Management Log (IML).
      
      Fixed an issue where the OCP retimer slot number was not correctly reported in
      SMBIOS type 216.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12_12-13-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where Intel Software Guard Extensions (SGX) Attestation may
      fail on the 5th Generation Intel Xeon Scalable Processors. Software Guard
      Extensions (SGX) is disabled by default.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.16_03-01-2024
changelog:
  -     Added help messages about using the "-tpmbypass" flag when flashing smart
      components under silent mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.16_03-01-2024
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the revision of the TPM2 Measure boot
      library update which provides mitigation for security vulnerabilities
      documented as CVE-2022-36763 and CVE-2022-36764.
      
      This revision of the System ROM includes the revision of the MiniZip Library
      update which provides mitigation for security vulnerabilities documented as
      CVE-2023-45853.
      
      This revision of the System ROM includes the revision of the EDK2 NetworkPkg
      IP stack implementation update which provides mitigation for security
      vulnerabilities documented as CVE-2023-45229, CVE-2023-45230, CVE-2023-45231,
      CVE-2023-45232, CVE-2023-45233, CVE-2023-45234, CVE-2023-45235,
      CVE-2023-45236, CVE-2023-45237.
      
      Addressed an issue where PCI slot information, Slot Physical width and Slot
      Pitch are not correct in the SMBIOS Type 9.
      
      Addressed an issue where the NUMA nodes are not assigned properly when Sub-
      NUMA Clustering is set 2 or 4.
      
      Addressed an issue where the operating system cannot detect the iSCSI hard
      drive through IPv6 installation.
      
      Addressed an issue where the version information of the System Programmable
      Logic Device may be displayed incorrectly in RBSU and iLO GUI.
      
      Addressed an issue where a Red Screen of Death (RSOD) may be seen during a
      system boot.
      
      Addressed an issue where the embedded NIC(Network Interface Card) connected to
      the Intel PCH could become missing when Intel(R) PCH VMD Support is set to
      enabled.
      
      Addressed an issue where the "Enabled Cores per Processor" in RBSU cannot be
      set greater than 56.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20_05-27-2024
changelog:
  -     Added production HCI marker key for OEM activation for Windows Azure.
      
      Added value "C6 without C1E" in System Configuration (RBSU) option "Power
      Management/Advanced Power Options menu/Minimum Processor Idle Power Core
      C-State". When selected, the Minimum Processor Idle Power Core C-State is C6
      with C1E disabled. This setting has the following Redfish property:
      /redfish/v1/systems/1/bios/MinProcIdlePower
      
      Added the System Configuration (RBSU) option "Power and Performance
      Options/Advanced Performance Tuning Options/Intel(R) AVX License Pre-Grant
      Override". When enabled, the pre-grant license level will be set based on the
      value of AVX ICCP Pre-Grant Level option. This setting has the following
      Redfish property:
      /redfish/v1/systems/1/bios/settings/AvxLicensePreGrantOverride
      
      Added the System Configuration (RBSU) option "Power and Performance
      Options/Advanced Performance Tuning Options/Intel(R) AVX ICCP Pre-Grant Level"
      to pre-grants an AVX level to the core. This setting has the following Redfish
      property: /redfish/v1/systems/1/bios/settings/AvxIccpPreGrantLevel
      
      Added the System Configuration (RBSU) option "PCIe Device
      Configuration/Advanced PCIe Configuration/ PCI-E ASPM Support (Global)" to
      control ASPM support in all PCIe root port. This setting has the following
      Redfish property: /redfish/v1/systems/1/bios/settings//redfish/v1/systems/1/bi
      os/settings/PcieGlobalAspm


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20_05-27-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel Product
      Update (IPU) version IPU.2024.1 guidance. This version of the System ROM
      contains updates aligned with the 5th Generation Eagle Stream Intel Xeon
      Processor Scalable Family maintenance release 1 (MR1). This revision of the
      System ROM includes the mitigation for security vulnerabilities CVE-2023-5678,
      CVE-2024-0727 and CVE-2023-45229. The security vulnerabilities are documented
      in the CVE report site. They are not unique to HPE servers. This version of
      the System ROM should be paired with Server Platform Services (SPS) Firmware
      06.01.04.047.0 (2.20_03_26_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang while enrolling secure boot key dbr
      certificate via Redfish API.
      
      Addressed an issue where system failed to boot with selected NVMe HDD by
      setting One-Time Boot Option in ILO Web.
      
      Addressed an issue where the boot order was cleared unexpectedly after
      configuring System Configuration (RBSU) options, navigating to Boot Options >
      UEFI Boot Settings > UEFI Boot Order and then pressing F12 to Save and Exit.
      
      Removed value "Not Specified" in System Configuration (RBSU) option "Server
      Security/Trusted Platform Module Optioins/Current TPM 2.0 Active PCRs" and set
      the default value as "SHA1 and SHA256".
      
      Addressed an issue where Redfish resource was not updated after deleting
      secure boot keys via System Configuration (RBSU).
      
      Addressed an issue where the system failed to enroll certificate to PK and KEK
      via Redfish.
      
      Addressed an issue where the OS could not detect the iSCSI drive through IPv6
      installation when iSCSI IpAddressType is set to auto.
      
      Addressed an issue where the boot order of NVMe drives cannot be changed.
      
      Addressed an issue where system may encounter a RSOD while updating SAS drive
      FW via HPE Service Packs, including, but not limited to, VMware ESXi Online
      HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02
      (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July
      2024).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.22_06-19-2024-2.1
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.047.0 (2.20_03_26_2024). This version of the System
      ROM contains updates aligned with the Intel uPLR1 OOB2 guidance.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where a NVMe drive would not be unmounted when it exceeds
      the DPC error threshold with ESXi 8.0U2 or newer versions.
      
      Addressed an issue where system would not be configured as 4 sub-NUMA nodes
      per socket (SNC4) when Virtual NUMA is enabled and SNC2 is enabled.
      
      Addressed an issue where updating NVMe-oF initiator name would not take
      effect.
      
      Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword
      were not working.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.18_03-27-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023)
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the power supply unit redundancy function operated
      abnormally.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_06-29-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where a drive cannot be unmounted after hot-plug
      interruption during DPC (Downstream Port Containment) recovery process under
      VMware.
      
      Addressed an issue where Citrix HyperVisor could not be installed.
      
      Addressed an issue where the system would hang in POST if Intel UPI link
      enablement was set to single link operation.
      
      Addressed an issue where the SMBIOS type 38 offset 0x10 had an incorrect
      value.
      
      Addressed an issue where the erase status for SATA drives is reported
      incorrectly when using One Button Secure Erase.
      
      Addressed an issue where location information under RBSU "Storage Device
      Information" page will show "null string" when VROC is enabled.
      
      Addressed an issue where the "Minimum Processor Idle Power Core C-state" from
      RBSU showed an incorrect value when one of Virtualization Max Performance, Low
      Latency, Transactional Application Processing, High Performance Compute (HPC)
      workload profiles is selected.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages were
      not synchronized.
      
      Addressed an issue where an incorrect "processor's PUcode" version showed up
      on screen during the POST after downgrading the System ROM.
      
      Addressed an issue where status display of PCIe Root Complex for Intel Quick
      Assist Technology (Intel QAT) is not correct in Windows Device Manger on dual-
      processor systems.
      
      Addressed an issue where the PCI speed might be incorrect when setting
      "Maximum PCI Express Speed" to "Per Port Control".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.44_07-31-2023
changelog:
  -     Set the value of the Snoop Response Hold Off for IOAT Stack setting to 7 when
      the vRAN Workload Profile has been selected. This aligns with Intels
      performance tuning recommendation.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.48_09-27-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system might hang with SRIS of CPU PCIe port enabled.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12_12-19-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where Intel Software Guard Extensions (SGX) Attestation may
      fail on the 5th Generation Intel Xeon Scalable Processors. Software Guard
      Extensions (SGX) is disabled by default.
      
      Corrected the default of Workload Profile to be General Power Efficient
      Compute in the ROM-Based Setup Utility (RBSU).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.14_01-02-2024
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where the OCP Slot 14 device was not displayed properly and the
      OCP Slot 21 became redundant from iLO web.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.36_05-26-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added new System Configuration (RBSU) configuration options that allow
      controlling Intel OSB function. This includes the "OSB Local/Remote Read"
      option with settings of "Disabled" (default) and "Auto" options that allows
      setting Intel Opportunistic Snoop Broadcast.  When the "OSB Local/Remote Read"
      option is configured for "Disabled", BIOS will disable OSB function. When the
      "OSB Local/Remote Read" option is configured for "Auto", BIOS will
      automatically decides based on silicon compatibility. In System Configuration
      (RBSU), these options are located under the BIOS/Power and Performance
      Options/Intel UPI Options. This setting has the following Redfish properties:
      /redfish/v1/systems/1/bios/settings/OsbLocalRemoteRead
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10_11-28-2023
changelog:
  -     Added support for NVMe over Fabrics.
      
      Added new System Configuration (RBSU) configuration options that allow the
      system not to create boot options for non-bootable fixed drive.
      
      Modified System Configuration (RBSU) configuration options that support new
      license SKU "RAID1 Only" and drop "Standard" SKU for Intel VROC.
      
      Enhanced the warning messages of "Embedded SATA Configuration" options in
      RBSU.
      
      Enhanced the warning messages of "Intel CPU VMD Support" options in RBSU.
      
      Added new System Configuration (RBSU) configuration options that could control
      Intel Trust Domain Extension (TDX) functions.
      
      Added new System Configuration (RBSU) configuration options that could control
      the NVMe-oF Software Initiator.
      
      Added new System Configuration (RBSU) configuration options that could control
      the PCI-E Data Link Feature Exchange.
      
      Added new System Configuration (RBSU) configuration options that allow Power
      Supply Unit fan control.
      
      Enhanced the help message for System Configuration (RBSU) configuration
      options for Automatic Power-On.
      
      Enhanced the help message and status information for System Configuration
      (RBSU) configuration options for HBM Memory Mode.
      
      Updated the Processor Capability Indicator in SMBIOS type 197.
      
      Enhanced POST messages in situations where where unsupported processors are
      installed.
      
      Added PCIe Gen2 device in SMBIOS type 9.
      
      Enhanced SMBIOS type 9 for PCIe retimer device information.
      
      Displayed the information of first device in SMBIOS type 203 when the PCI slot
      is bifurcated.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12_12-13-2023
changelog:
  -     *Important Notes:**
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where Intel Software Guard Extensions (SGX) Attestation may
      fail. Software Guard Extensions (SGX) is disabled by default.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.44_01-18-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel MR1
      Best Known Configuration for Intel Xeon E-2400 series processors. This
      revision of the System ROM includes the mitigation for NetworkPkg PXE IP stack
      vulnerabilities documented as CVE-2023-45229, CVE-2023-45230, CVE-2023-45231,
      CVE-2023-45232, CVE-2023-45233, CVE-2023-45234, CVE-2023-45235,
      CVE-2023-45236, and CVE-2023-45237.
      
      This version of the System ROM should be paired with Server Platform Services
      (SPS) Firmware 06.02.04.016.0 (1.44_01_03_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the SATA drive location information was inconsistent
      between One-time boot menu and SMBIOS table.
      
      Addressed an issue where iSCSI SW ipv6 HDD was not detected under OS when the
      iSCSI IpAddressType was set to auto.
      
      Addressed an issue where the PMC version presented even when RPSU was not
      installed.
      
      Addressed an issue where DMI Link ASPM was not set correctly.
      
      Addressed an issue where Enhanced C-State could not be disabled when Minimum
      Processor Idle Power Core C-State was enabled.
      
      This revision of the System ROM includes the mitigation for NetworkPkg PXE IP
      stack vulnerabilities documented as CVE-2023-45229, CVE-2023-45230,
      CVE-2023-45231, CVE-2023-45232, CVE-2023-45233, CVE-2023-45234,
      CVE-2023-45235, CVE-2023-45236, and CVE-2023-45237.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.46_02-22-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2023-45229, CVE-2023-45853, CVE-2022-36763 and
      CVE-2022-36764. This version of the System ROM should be paired with Server
      Platform Services (SPS) Firmware 06.02.04.016.0 (1.44_01_03_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system would reboot immediately after changing
      Intel TXT setting then pressing F10.
      
      Addressed an issue where the boot order of NVMe drives is always the lowest
      prioirty.
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2023-45229, CVE-2023-45853, CVE-2022-36763 and
      CVE-2022-36764.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.48_03-14-2024
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. This version of
      the System ROM should be paired with Server Platform Services (SPS) Firmware
      06.02.04.016.0 (1.44_01_03_2024).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Redfish resource was not updated after deleting
      secure boot keys via System Configuration (RBSU).
      
      Addressed an issue where the system failed to enroll certificate to PK and KEK
      via Redfish.
      
      This revision of the System ROM includes the mitigation for vulnerabilities
      documented as CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50_05-16-2024
changelog:
  -     *Important Notes:**
      
      This version of the System ROM contains updates aligned with the Intel MR2
      Best Known Configuration for Intel Xeon E-2400 series processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang while enrolling secure boot key dbr
      certificate via Redfish API.
      
      Addressed an issue where system failed to boot with selected NVMe HDD by
      setting One-Time Boot Option in ILO Web.
      
      Addressed an issue where the boot order was cleared unexpectedly after
      configuring System Configuration (RBSU) options, navigating to Boot Options >
      UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.
      
      Removed the value of "Not Specified" in System Configuration (RBSU) option
      "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs"
      and set the default value as "SHA1 and SHA256".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.04.033.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Best Known Configuration (BKC) WW09.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Updated Server Platform Services (SPS) Firmware to 06.00.04.033.0 to align
      with the Intel Best Known Configuration (BKC) WW09.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.04.075.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for Intel Sapphire Rapids.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version contains the latest Server Platform Services firmware for Intel
      Sapphire Rapids.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.05.046.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th Generation Intel Xeon Scalable Processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This version contains the latest Server Platform Services firmware for 4th
      Generation Intel Xeon Scalable Processors.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.005.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th Generation Intel Xeon Scalable Processors and 5th
      Generation Intel Xeon Scalable Processors. This version of the SPS should be
      paired with System ROM 2.10 (11/28/2023).
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may enter standby mode on Power-On Self-Test
      (POST) during warm reset cycle.
      
      Addressed an issue where system may stop responding at "Memory Initialization
      - Start" during Power-On Self-Test (POST).
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.01.04.047.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th and 5th Generation Intel Xeon Scalable Processors.
      This version of the SPS should be paired with System ROM 2.20.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version is in compliance with Intel uPLR1 guidance.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.02.04.016.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for the Intel Raptor-Lake PCH-S based systems. This version of
      the SPS should be paired with System ROM 1.44 (01/18/2024) or later.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version contains the latest Server Platform Services firmware for the
      Intel Raptor-Lake PCH-S based systems.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.02.04.035.0
changelog:
  -     This version contains the latest Server Platform Services firmware for the
      Intel Xeon E-2400 series processors.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.02.04.035.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for the Intel Xeon E-2400 series processors. This version of
      the SPS should be paired with System ROM 1.50 (05/16/2024) or later.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where Intel(R) SPS Firmware may assign duplicate MCTP EIDs
      for adapters.
      
      **Known Issues:**
      
      None


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 4.0.1-1
changelog:
  - Add SLES15 SP2 support
  - This driver fix system freezes when trying to create TCs on VF with no more VSIs available.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.3-1
changelog:
  - Added RHEL 6.8 support
  - Fix the issue of getting crash dump when loading igb module(modprobe igb)
  - Fix unable to disable the offload property in rhel6u6


changelog:
  - Added SLES12SP2 support
  - Added RHEL 7.3 support

author:
  HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.7-8[rhel6u9], 5.3.5.7-1[For other OSs]


changelog:
  - Added RHEL6.10 Support.
  - Added RHEL7.5 Support.

author:
  HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.19-0[rhel6.10, rhel7u5], 5.3.5.15-7[For other OSs]


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.42
changelog:
  - This driver fixes an issue of driver crash with ethtool command.
  - This driver fixes an issue of Klocwork hits.
  - Added RHEL7u6 Support.
  - Added SLES12SP4 Support.


author: HPE Linux SW Deliverables <Linux_SWdeliverables@external.groups.hpe.com> 0.13.1-1
changelog:
  - Fix return values and prints in VF MAC add/del flow
  - Fix kernel panic after transiting FW LLDP from on to off and restarting lldpad
  - Fix Throughput lower than expected.


author: HPE Linux SW Deliverables <Linux_SWdeliverables@external.groups.hpe.com> 1.6.4-1
changelog:
  - Addressing the issue of system reboot on unloading iavf driver with maxvfs enabled in switchdev mode


author: QLogic Corp <support@qlogic.com> 10.02.12.01-k1-1
changelog:
  - 10.02.12.01-k1 MR 05/29/2024
  [FCD-3465] : Server got crashed while running port toggle test.

  Resolution : During vport_delete send async_logout explicitly.
  Scope : 28XX

  - 10.02.12.00-k1 SD 05/20/2024
  -

  - 10.02.12.00.a5-k1 SD 05/07/2024
  [FCD-3970] : Crash while performing NPIV+FW reset test

  Resolution : Call sp->done inside lock
  Scope : All adapters

  [FCD-3947] : Supported speed displayed incorrectly for VPorts

  Resolution : The fc_function_template for vports did not have the
  supported_speeds field.
  Scope : All adapters

  - 10.02.12.00.a4-k1 SD 04/25/2024
  [FCD-3970] : Crash while performing NPIV+FW reset test

  Resolution : Call sp->done inside lock
  Scope : All adapters

  [FCD-3947] : Supported speed displayed incorrectly for VPorts

  Resolution : The fc_function_template for vports did not have the
  supported_speeds field.
  Scope : All adapters


  - 10.02.12.00.a3-k1 SD 03/15/2024
  [FCD-3797] : Driver installed using tarball failed to build initrd
  image after executing "./extras/build.sh initrd" command.

  Resolution : SLES15SP6 stop supporting mkinitrd command.
  Scope : ALL

  [FCD-xxx] : SFP cache on legacy adapter

  Scope : all

  - 10.02.12.00.a2-k1 SK 02/08/2024
  [FCD-3797] : Driver installed using tarball failed to build initrd
  image after executing "./extras/build.sh initrd" command.

  Resolution : SLES15SP6 stop supporting mkinitrd command.
  Scope : ALL

  [FCD-xxx] : Fix NVME + NPIV connect issue

  Resolution : Initialize irq offset
  Scope : ALL

  - 10.02.12.00.a1-k1 QT 01/09/2024
  scsi: qla2xxx: Drop redundant pci_enable_pcie_error_reporting()
  Resolution : Fix RHEL 9.4 compile issue
  Scope : ALL

  [FCD-3515] : API support for SFP data cache
  Scope : 27xx, 28xx

  [FCD-xxx] : Fix SLES15.6 compile issue
  Resolution : Remove stale fields
  Scope : ALL

  [FCD-3634] : Remove check req_sg_cnt should be equal to rsp_sg_cnt.
  Resolution : Firmware supports multiple sg_cnt for request and
  response for CT commands, so remove the redundant check.
  Scope : All Adapters

  [FCD-717] : Move FCE Trace buffer allocation to user control
  Resolution : Modify existing DFS knob to allow user to enable|disable this feature.
  Scope : Any

  [FCD-xxx] : Remove del_work work from qla_schedule_sess_for_deletion.
  Resolution : Remove del_work work from qla_schedule_sess_for_deletion.
  Scope : All

  [FCD-xxx] : Additional target mode code cleanup.
  Resolution : Additional target mode code cleanup.
  Scope : All

  [FCD-xxx] : Update copyright information.
  Resolution : Update copyright information.
  Scope : All

  [FCD-xxx] : Remove target code from qla_target files.
  Resolution : Remove target code from qla_target files.
  Scope : All

  [FCD-xxx] : Remove target mode code from initiator specific files.
  Resolution : Remove target mode code from initiator specific files.
  Scope : All

  [FCD-xxx] : Move common code to initiator specific files.
  Resolution : Move common code to initiator specific files.
  Scope : All

  [FCD-3751] : Fix use after free on unload
  Resolution : Remove duplicate signals on freeing dpc_thread
  Scope : ALL

  [FCD-3515] : Caching SFP data
  Scope : 27xx, 28xx

  [FCD-xxx] : Exec FW with delay
  Resolution : Add delay before command retry
  Scope : 28xx

  [FCD-xxx] : fix abort in bsg timeout
  Resolution : Wait for bsg to return before abort exit
  Scope : ALL

  [FCD-xxx] : Use QP lock to search for bsg.
  Resolution : use correct lock to protect search
  Scope : ALL

  [FCD-xxx] : Remove SQ in queuecommand
  Resolution : Remove duplicate code.
  Scope : ALL

  [FCD-xxx] : Reduce fabric scan duplicate code.
  Resolution : Consolidate routines that handle GPNFT & GNNFT.
  Scope : ALL

  [FCP-743] : Remove ql2xstay_attach_on_load_failure
  Resolution : Remove driver parameter used as part of feature test.
  Scope : 27xx, 28xx


  - 10.02.11.00-k1 NJ 10/25/2023
  [FCD-xxx] : Remove PCI ID 0x2971
  Resolution : Remove PCI ID 0x2971
  Scope :

  [FCD-3661] : Remove 8031 from deprecate and unmaintained list.
  Resolution : Remove 8031 from deprecate and unmaintained list.
  Scope : 8031

  [FCD-3571] : Unable to resume FW dump collection
  Resolution : send notification to udev
  Scope : 27xx, 28xx

  [FCD-3631] : Convert Port disable state to maintenance mode
  Resolution : Rename state and turn flag indicator
  Scope : 27xx + 28xx

  - 10.02.11.00.a8-k1 NJ 10/13/2023
  [FCD-3632] : Remove support for FCoE device ids.
  Resolution : Remove FCoE ids from pci table.
  Scope : 8xxx

  [FCD-3624] : Fix optrom version displayed in FDMI
  Resolution : Populate EFI version
  Scope : Series Adapters

  [FCD-3632] : Remove CNA reference from README.
  Resolution : Remove CNA reference from README.
  Scope : 8xxx

  - 10.02.11.00.a7-k1 NJ 09/22/2023

  [FCD-3195] : Fix flash read failure
  Resolution : Check return code for each flash read.
  Scope : Series Adapters

  [FCD-3571] : System flood by fw dumps
  Resolution : udev script to pause fw dump collection
  Scope : Any

  [FCD-3566] : Limit FW dump improvement to 27xx + 28xx
  Resolution : Add filter for 27xx + 28xx adapters
  Scope : 27xx+

  [FCD-3497] : Return ENOBUFS if sg_cnt is more than one for ELS cmds.
  Resolution : This error is because FW support single sg element for
  ELS Pass-through IOCB (0x53h). This particular error
  code will help API and Apps to display appropriate
  message to the user.
  Scope : All Adapters

  [FCD-3510] : RHEL & SLES OOB driver request: deprecate L8/Hilda HW
  Resolution : Added a frame work to display the message based on device and OS.
  Scope : L8 and L16 (Hilda and CNA)

  [FCD-3269] : Init Control Block is dereferenced incorrectly
  Resolution : Correctly dereference ICB
  Scope : 20xx

  [FCD-3421] : Add Support to collect fw_dump on system crash or panic.
  Resolution : Add Support to collect fw_dump on system crash or panic
  Scope : 27xx, 28xx

  - 10.02.11.00.a6-k1 MR 09/08/2023

  [FCD-XXX] : Modify error code handling for sfp fw upgrade mbx.
  Resolution : Modify error code handling for sfp fw upgrade mbx.
  Scope : 28xx

  [FCD-XXX] : Block sysfs resets and fw_dump during sfp fw upgrade
  Resolution : Block sysfs resets and fw_dump during sfp fw upgrade
  Scope : 28xx

  [FCP-743] : Block sysfs access during maintenance mode
  Resolution : Add check for maintenance mode.
  Scope : Any

  [FCD-3506] : Fix double free of dsd_list during driver load.
  Resolution : add pointer check before access
  Scope : Any

  - 10.02.11.00.a5-k1 MR 08/18/2023

  [RH BZ 2039422] : NVMe-FC kernel crash during reload driver test
  Resolution : validate nvme_local_port correctly
  Scope : Any

  [FCD-XXX] : Fix for potential Null pointer dereferenced
  Resolution : Check before dereferencing pointer
  Scope : Any

  [FCP-743] : Enable driver attach to bad HW
  Resolution : turn on ql2xstay_attach_on_load_failure option
  Scope : 27xx, 28xx

  - 10.02.11.00.a4-k1 MR 08/11/2023

  [FCD-xxx] : Update README file for zio information
  Resolution : Update readme file with zio information
  Scope : Any

  [FCD-3415] : Std-DIF is not working with HPe K1 driver
  Resolution : Reset the protect bit in the INQ response
  only when pDIF is enabled and negotiated.
  Scope : 26xx/27xx/28xx

  - 10.02.11.00.a3-k1 AG 08/03/2023

  [FCP-743] : Allow only selective BSG requests in maintenance mode
  Resolution : Allow certain BSG to go through during maintenance mode
  Scope : Any

  [FCP-743] : FW dump improvement
  Resolution : Improve data capture
  Scope : 27XX, 28XX

  [FCD-3252] : Unable to act on RSCN for port online.
  Resolution : Clear RSCN flag only when driver is acting on the notification
  Scope : Any

  [FCD-xxx] : 32 Bytes CDB
  Resolution : Use Type 6 IOCB for CDB bigger than 16Bytes
  Scope : Any

  Unit Test : i) force IO to use Type6 only for over the weekend run.
  ii) force error path(s) to make sure no crash.

  [FCD-xxx] : Move resource to allow code reuse.
  Resolution : relocate dsd_list to qpair
  Scope : Any

  - 10.02.11.00.a2-k1 AG 07/27/2023

  [FCD-3411] : CS_DMA Error observed while running DIF IO
  Resolution : While running DIF enabled IO, a CS_DMA error was observed.
  A FW dump is needed to better debug this. So take a FW dump
  on encountering this.
  Scope : 27xx/288 series of adapters

  [FCD-3406] : Modifiy default zio threshold value.
  Resolution : Modifiy default zio threshold value.
  Scope : 27xx/28xx Series Adapters

  [FCD-3314] : Delay IO Abort on PCI error
  Resolution : On detection of PCI error, allow IO's to wind down.
  Scope : Any

  [FCD-3314] : Fix system crash due to bad pointer access
  Resolution : Check SRB type before access.
  Scope : 27xx+

  - 10.02.11.00.a1-k1 AG 07/14/2023

  - FCP-749: qla2xxx: Add support for build for RH 9.3 and RH 8.9 distro
  Resolution : Build on RH 9.3 was failing owing to change of definition
  of fc_host_fpin_rcv and removal of DID_TARGET_FAILURE. Fix part of it
  by updating to latest upstream code.
  Scope : 27xx/28xx series of adapters


  - FCD-3302 : During unload Error detected messages is seen.

  Resolution : Change the wording of the message as its not an error.
  Scope : Series Adapters

  - FCD-3293 : Initiator sever getting crashed after LOGO.

  Resolution : Fix double free of fcport
  Scope : Any

  - Revert "scsi: qla2xxx: Change default ZIO threshold."

  This reverts commit 8812bcc1b7a25494ec8755ff3b61412a9993ff5b.
  The ZIO threshold now is 64.

  - FCD-xxx : Fix unreachable code

  Resolution : Remove dead code
  Scope : 28xx+

  - FCD-3232 : Potential risk of double free pointer detected in Coverity scan by ran by Citrix

  Resolution : NULL the pointer after first free.
  Scope : All

  - 10.02.10.00-k1 SK 06/14/2023
  Non-alpha build

  - 10.02.10.00.a2-k1 BH 05/12/2023

  - FCD-3140: qla2xxx: Fix command flush on cable pull.
  Changes: Add wait for commands to return.

  - FCD-XXX: qla2xxx: NVME|FCP prefer flag not being honored.
  Changes: Reread prefer flag on chip reset

  - FCD-XXX: qla2xxx: Update readme file

  - 10.02.10.00.a1-k1 BH 05/02/2023
  - FCD-XXX: qla2xxx: Update Copyright
  Changes: Update Copyright for Marvell.

  - FCD-XXX: qla2xxx: Update manufacturer detail
  Changes: Update manufacturer detail to "Marvell"

  - FCD-3140: qla2xxx: Host crash during StressAndHostPortReset test
  Changes: Remove unused nvme_ls_waitq wait queue.

  - FCD-XXX: qla2xxx: [RH-BZ 2167274]: Wait for io return on terminate rport.
  Changes: dd wait to terminate_rport_io

  - 10.02.09.00.a11-k1 BH 03/27/2023
  - FCD-XXX: qla2xxx: Add link down + logo rx stat counts
  Changes: Add counters to track link down and Logo receive.

  - 10.02.09.00.a10-k1 BH 03/17/2023
  - FCD-XXX: qla2xxx: Support for update SFP firmware of ACCELINK
  Changes: [New Feature] Support for update SFP FW of ACCELINK WTD 64G

  - FCD-717: qla2xxx: Split FCE|EFT trace control
  Changes: Split buffer alloc and enable of feature into individual step.

  - BZ-2093878: qla2xxx: perform lockless command completion in abort path
  Changes: Perform lockless command completion in abort path

  - 10.02.09.00.a9-k1 BH 03/06/2023
  - FCD-2390: qla2xxx: Fix N2N stuck connection.
  Changes: Clear the blocking flag.

  - FCD-2496: qla2xxx: Prevent command send on chip reset
  Changes: Check for chip reset before sending IOCB.

  - FCD-2035: qla2xxx: Fix mem access after free.
  Changes: Remove access of memory

  - FCD-2720: qla2xxx: Move cmd_to_req_q latency counter before processing response.
  - FCD-XXX: qla2xxx: Update readme file for current program

  - 10.02.09.00.a8-k1 BH 02/27/2023
  - FCD-2585: qla2xxx: Remove unsupported ql2xenabledif option.
  Changes: Removed unsupported ql2xenabledif=1 option and validate the user input.

  - FCD-2305: qla2xxx: Error code did not return to upper layer
  Changes: Preserve error code from TMF and return it to upper layer.

  - FCD-2035: qla2xxx: fix inconsistent TMF timeout.
  Changes: Allow TMF error to return to upper layer without session tear down.

  - FCD-2035: qla2xxx: Fix TMF leak through.
  Changes: Check for chip reset or session change before sending Task management.

  - 10.02.09.00.a7-k1 BH 02/17/2023
  - FCD-2858: qla2xxx: USCM: Check for vp_idx before setting EDC and RDF set flags.
  Changes: Add check for vp_idx before setting EDC and RDF set flags when processing RIDA.

  Revert patch:
  - FCD-2858: qla2xxx: USCM: Remove EDC and RDF set flags on Report ID Acquisition.

  - 10.02.09.00.a6-k1 BH 02/13/2023
  - FCD-2750: qla2xxx: IO's are failing on Standard DIF enabled 3PAR LUN
  Changes: Revert an offending patch and work on an issue with upstream.

  - 10.02.09.00.a5-k1 BH 02/06/2023
  - FCD-2858: qla2xxx: USCM: Remove EDC and RDF set flags on Report ID Acquisition
  Changes: Remove EDC and RDF set flags on Report ID Acquisition.

  - FCD-2879: qla2xxx: Compilation errors on SLES15SP5 Beta3-202301
  Changes: Write generic code to find tag of scsi cmnd

  - FCD-2846: qla2xxx: Correct bsg_reply size in bsg interface
  Changes: Fix the bsg_job->reply_len with size of "struct fc_bsg_reply"

  - FCD-XXXX: qla2xxx: KW: unreachable code
  Changes: Remove the invariant expression in the condition

  - FCD-XXXX: qla2xxx: KW: unreachable code
  Changes: Remove the expression flogi_acc_pld_remaining == 0

  - FCD-XXXX: qla2xxx: Changes of logs level for SFP temperature monitoring

  - 10.02.09.00.a4-k1 BH 01/29/2023
  - FCD-2308: qla2xxx: Add bsg call to read port information
  Changes: Add bsg interface to allow app to read remote port information.

  - FCD-XXX: qla2xxx: KW-97439: unreachable code
  Changes: Return void if return value is not needed

  - FCD-XXX: qla2xxx: Add logs for SFP temperature monitoring
  Changes: Add debug log for Temperature Alert (8070h) Asynchronous Event

  - 10.02.09.00.a3-k1 BH 01/19/2023
  - FCD-XXX: qla2xxx: Add support of RHEL9.2
  - FCD-XXX: qla2xxx: Add support of RHEL8.8
  - FCD-XXX: qla2xxx: Add support of SLES15 SP5
  - FCD-2800: qla2xxx: Add support of OpenEuler-22.03

  - 10.02.09.00.a2-k1 BH 01/10/2023
  - FCD-XXX: qla2xxx: kw: unreachable code, SRB type is 0 just before latency counter incremented.
  Changes: SRB type is 0 just before latency counter incremented.

  - FCD-XXX: qla2xxx: kw: reset current_topology much later
  Changes: Reset current_topology much later on detecting

  - FCD-XXX: qla2xxx: kw: unreachable code, CS_COMPLETE is 0 and its already checked.
  Changes: Remove unreachable

  - FCD-XXX: qla2xxx: kw: Checking for port_state always yields zero
  Changes: Instead of bitwise AND check for port_state directly

  - FCD-1569: qla2xxx: Fix fw resource tracking
  Changes: Use global counter

  - FCD-XXX: qla2xxx: [ER-144639]: Flush mailbox commands on chip reset
  Changes: Use lock to prevent race condition.

  - FCD-2735: qla2xxx: USCM-VL: NVRAM VL disabled logins with extend FLOGI (VL enabled)
  Changes: Reset the spl. features control block flag to avoid logging in with ER_RDY.

  - FCD-XXX: qla2xxx: klockwork: Fix buffer over flow
  Changes: Use correct buffer size.

  - FCD-XXX: qla2xxx: EDIF: kw: remove unnecessary bit field
  - FCD-2563: qla2xxx: Turn off noisy message log.
  - FCD-XXX: qla2xxx: kw: remove dead code in qla24xx_config_rings

  - 10.02.09.00.a1-k1 BH 01/10/2023
  - FCD-717: qla2xxx: allow FW dump extraction if load fail
  Changes: Add knob to force driver to stay attached to the fail adapter.

  - FCD-717: qla2xxx: Initialize FW buffer size with seed value
  Changes: Initialize FW Buffer size with seed value

  - FCD-XXX: qla2xxx: klockwork: Remove QLA_COMMAND_ERROR check in qla2x00_execute_fw.
  Changes: Remove the unnecessary QLA_COMMAND_ERROR check

  - FCD-2390: qla2xxx: Fix session hang in gnl
  Changes: Clear this flag to prevent blockage.

  - FCD-2390: qla2xxx: Fix erroneous link up failure
  Changes: Set fw_started flag early to prevent interrupts being dropped

  - FCD-2496: qla2xxx: Fix command flush during TMF
  Changes: Wait for commands flush before closing TMF

  - FCD-2035: qla2xxx: Limit TMF to 8 per function
  Changes: Limit TMF to 8 per function

  - FCD-XXX: qla2xxx: Add NVMe Disconnect support.
  Changes: Add support for NVMe Disconnect feature.

  - FCD-XXX: qla2xxx: Modify qla27xx_copy_fpin_pkt to support PURLS IOCB.
  Changes: Modified qla27xx_copy_fpin_pkt to support both PUREX and PURLS IOCBs.

  - FCD-717: qla2xxx: Adjust iocb resource on qpair create
  Changes: Add call to readjust iocb + exchange limit.

  - FCD-2390: qla2xxx: Fix deletion race condition
  Changes: Move check field behind lock

  - FCD-XXX: qla2xxx: klockwork: Pointer checked for NULL at linx x will be dereferenced at linx x+y.
  Changes: Remove the unnecessary Null check. The pointer will likely be valid.

  - FCD-XXX: qla2xxx: Observed call trace in smp_processor_id() with debug kernel
  Changes: Use raw_smp_processor_id API

  - FCD-2275: qla2xxx: USCM: Cleanup code related to IOPS based throttling
  Changes: IOPS and BW based throttling is not used. Remove those code.

  - FCD-2273: qla2xxx: USCM: Code cleanup w.r.t module params (ql2x_scmr_flow_ctl_tgt, ql2x_scmr_flow_ctl_host)
  Changes: Remove the redundant module parameters

  - FCD-2408: qla2xxx: USCM: Driver doesn't honor the adapter port Restore Default Settings
  Changes: Update the nvram values to the host as well as fcport

  - FCD-2363: qla2xxx: USCM: Slow Queue usage changes
  Changes: Use Slow queue only under specific scenarios

  - FCD-XXX: qla2xxx: Don't increment interface err cnt in SS_RESIDUAL_UNDER case.
  Changes: Don't increment the counter for under-run.

  - FCD-2291: qla2xxx: Erroneous link down.
  Changes: Allow adapter reset to complete before discovery

  - FCD-2035: qla2xxx: Fix hang in task management
  Changes: Bail out of TMF on error

  - FCD-XXX: qla2xxx: Reduce memory usage during low IO.
  Changes: Free the extra buffers as traffic is reduced

  - FCD-2212: qla2xxx: USCM: Observed call trace during the rmmod qla2xxx module
  Changes: Free srb when throttle down I/O in NVME path

  - FCD-XXX: qla2xxx: USCM: Debug log message improvement
  Changes: Log target WWPN for peer congestion

  - FCD-2164: qla2xxx: Fix stall session after app start
  Changes: Use session delete to avoid the accidental clearing of scan_flag

  - FCD-2185: qla2xxx: USCM: Peer congestion throttling functionality doesn't honor the ISP reset/port toggle
  Changes: Clear the fcport throttling state on an ISP reset

  - FCD-2194: qla2xxx: USCM: VL - Mailbox cmd failure during port toggle
  Changes: Check fcport state before invoking the mailbox

  - FCD-XXX: qla2xxx: USCM: VL - Enhance BW throttle to account for perf. drop while using VL
  Changes: Set throughput baseline on 1st FPIN

  - FCD-2096: qla2xxx: USCM: VL - PUN not incremented on PCN FPIN
  Changes: Fix parsing the fpin when multiple descriptors are present

  - FCD-XXX: qla2xxx: USCM: VL, Cache priority values from FLOGI_ACC
  Changes: Use priority values cached from FLOGI_ACC, when there is no PUN

  - FCD-XXX: qla2xxx: USCM: Limit throttling down based on throughput
  Changes: Limit throttling down based on throughput

  - FCD-XXX: qla2xxx: Fix for KW-97392
  Changes :Validate rport before dereferencing

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..15
  Changes: Correct the index of array

  - FCD-XXX: qla2xxx: Remove dead code - flagged by klocwork
  - FCD-847: qla2xxx: fixup: Fix exchange over subscription.
  - FCD-2434: qla2xxx: Fix crash when IO abort times out
  - FCD-XXX: qla2xxx: Rearrange scm rx path handling code.

  - 10.02.08.01-k1 BH 09/28/2022
  - FCD-2392: Fix initrd image creation failure in OpenEuler, Kylin and UOS
  Changes: Add support for creating initrd image on openEuler, Kylin and UOS

  - 10.02.08.00-k1 BH 09/16/2022
  - FCD-XXX: qla2xxx: Don't increment interface err cnt in SS_RESIDUAL_UNDER case.
  Changes: Residual under-run is not an interface error, hence no need to increment that count.

  - FCD-2291: qla2xxx: Fix erroneous link down.
  Changes: Allow adapter reset to complete before any scan can start.

  - FCD-2035: qla2xxx: Fix hang in task management
  Changes: Add additional error check at various point

  - FCD-XXX: qla2xxx: Reduce memory usage during low IO.
  Changes: Free the extra buffers as traffic is reduced.

  - 10.02.08.00.a7-k1 BH 08/22/2022
  - FCD-2212: qla2xxx: USCM: Observed call trace during the rmmod qla2xxx module
  Changes: Free srb when throttle down I/O in NVME path.

  - FCD-2164: qla2xxx: USCM: Fix stall session after app start
  Changes: Prevent accidental clearing of flag that blocks re-login

  - FCD-2185: qla2xxx: USCM: Peer congestion throttling functionality doesn't honor the ISP reset/port toggle
  Changes: Clear the fcport throttling state on an ISP reset.

  - FCD-2194: qla2xxx: USCM: VL - Mailbox cmd failure during port toggle
  Changes: Heck fcport state before invoking mailbox

  - FCDXXX: qla2xxx: USCM: Debug log message improvement

  - 10.02.08.00.a6-k1 BH 08/09/2022
  - FCDXXX: qla2xxx: USCM: VL - Enhance BW throttle to account for perf. drop while using VL
  Changes: if VL switchreduces the throughput below 50%, we would not throttle any further.

  - FCD-2096: qla2xxx: USCM: VL - PUN not incremented on PCN FPIN
  Changes: Fix the FPIN parsing to take into account multiple descriptors.

  - FCDXXX: qla2xxx: USCM: VL, Cache priority values from FLOGI_ACC
  Changes: Use priority values cached from FLOGI_ACC, when there is no PUN

  - FCDXXX: qla2xxx: USCM:Limit throttling down based on throughput
  Changes: Limit throttling down based on throughput

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..10

  - 10.02.08.00.a5-k1 BH 07/29/2022
  - FCD-XXX: qla2xxx: klocwork: Possible Null Pointer Dereference
  Changes: Validate rport before dereferencing

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..15
  Changes: Correct the index of array

  - FCD-XXX: qla2xxx: USCM: Fix mqueuecommand return code during throttle down request.

  - FCD-XXX: qla2xxx: Revert klockwork: Fix buffer overrun

  - FCD-2035: qla2xxx: Fix task mgmt cmd fail with status 30h
  - FCD-2035: qla2xxx: Fix Task Mgmt Cmd fail due to unavailable resource
  Changes: Limit TM commands to 8 per target.

  - 10.02.08.00.a4-k1 BH 07/23/2022
  - FCD-847: qla2xxx: Fix exchange over subscription.
  Changes: check for exchange availability before command submission

  - FCD-XXX: qla2xxx: Remove unintended flag clearing
  Changes: Remove unintended flag clearing.

  - FCD-2035: qla2xxx: Fix task mgmt cmd fail with status 30h
  Changes: Add wait for completion of Marker!

  - FCD-XXX: Fix performance dip due to lock contention
  Changes: Save the allocated memory for reuse and avoid the lock

  - FCDXXX: qla2xxx: USCM: Do not send EDC and RDF for NPIV ports
  Changes: Disable sending USCM ELS for vports

  - FCDXXX: qla2xxx: USCM: VL: Do not set target speed to 1G for slow lane
  Changes: Do not set the target speed while changing lanes.

  - FCD-2012: qla2xxx: Throttling up messages seen when profile is changed
  Changes: Set the new profile for each fcport (along with the host).

  - FCD-XXX: qla2xxx: USCM: VL - Clean up FLOGI_ACC parsing
  Changes: structure that could be used to parse the FLOGI_ACC by using offsets

  - FCD-1990: qla2xxx: Fix nvram load config error
  Changes: Remove re-definition of port flags while enabling virtual lane support

  - FCD-XXX: qla2xxx: USCM:VL, I/O does not move back to the normal lane
  Changes: Check if I/O throttling is being done, before deciding to move the normal lane.

  - FCD-XXX: qla2xxx: Fix stall login
  Changes: Reset session state to allow relogin logic to re-drive the connection.

  - FCD-847: qla2xxx: Fix exchange over subscription for mgt cmd.
  Changes: would check for exchange availability before command submission.

  - FCD-847: qla2xxx: Fix exchange over subscription.
  Changes: would check for exchange availability before command submission.

  - FCD-XXX: qla2xxx: relocate/rename vp map.
  - FCD-XXX: qla2xxx: Klocwork: Fix for Unexpected type of a scan function parameter

  - 10.02.08.00.a3-k1 BH 07/01/2022
  - FCD-1818: qla2xxx: Fix call trace in debug kernel due to missing spinlock init
  Changes: Fix the call trace by initializing trace lock.

  - FCD-1923: qla2xxx: USCM: VL - After disabling VL via CLI, status shows "Non-operational"
  Changes: Return VL status appropropriately

  - FCD-1922: qla2xxx: Fix discovery issues in FC-AL topology
  Changes: Checks FC loop map when Get ID list returns no device

  - FCD-1831: qla2xxx: Fix link failure in NIPV environment.
  Changes: Remove NPIV host from directly being able to chip reset.

  - FCD-XXX: qla2xxx: Fix DMA-API call trace on NVME LS requests with debug kernel
  Changes: Remove DMA mapping from the driver

  - FCD-XXX: qla2xxx: Fix KASAN use-after-free warning in qla24xx_sp_unmap
  Changes: Remove stale fcport access in qla2x00_rel_sp

  - FCD-XXX: qla2xxx: Fix KASAN out-of-bounds warning in qla_update_sp
  Changes: Size for memcpy was corrected to use the right length.

  - FCD-XXX: qla2xxx: Fix imbalance vha->vref_count
  Chnages: Add an extra ref count for the task management paths.

  - FCD-XXX: qla2xxx: Tweak Latency measurement
  Changes: Move the time read further ahead to the start of queuecommand and
  later to the point where it is just before scsi_done.

  - FCD-XXX: qla2xxx: klockwork: Silent superfluous warning.
  Changes: Remove superfluous Null check.

  - FCD-XXX: qla2xxx: klockwork: Fix buffer overrun
  Changes: Replace structure name to allow proper size calculation

  - FCD-XXX: qla2xxx: Remove dead code (GNN ID).
  Changes: Remove stale/unused code.

  - FCD-XXX: qla2xxx: Remove dead code (GPNID).
  Changes: Remove stale/unused code.

  - FCD-XXX: qla2xxx: Remove dead code.
  Changes: Removing drport field and FCPORT_UPDATE_NEEDED, and EDIF_TICK_NEEDED signals

  - FCD-XXX: qla2xxx: Do not select slow queue if USCM is enabled
  Changes: Do not select slow queue whilie initializing cpu map

  - FCD-XXX: Select HW queue depending on Tx CPU
  Changes: Select qpair which is in correlation with Tx CPU

  - FCD-XXX: qla2xxx: Add support for displaying I/O throttle information
  Changes: Display the driver I/O throttle information along with VL information

  - FCD-XXX: qla2xxx: USCM: Throttle only R/W commands for NVME
  Changes: Throttle only read/write IOs.

  - Bring back following reverted changes:
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.


  - 10.02.08.00.a2-k1 BH 06/19/2022
  - FCD-XXX: qla2xxx: klockwork - Check valid rport returned by fc_bsg_to_rport
  Changes: Check valid rport returned by fc_bsg_to_rport

  - FCD-XXX: qla2xxx: klockwork - Check for a valid fcport pointer
  Changes: Add a check for a valid fcport pointer at the time of exit

  - FCD-XXX: qla2xxx: klockwork - Move fcport NULL check to avoid dereference
  Changes: Move the fcport NULL check to avoid the dereference.

  - FCD-1883: qla2xxx: USCM: Adapter shows "RDF Complete" when Link is down
  Changes: Reset the flag, so that when USCM is negotiated, the CLI shows the correct status

  - FCD-1846: qla2xxx: USCM: A log message while clearing stats
  Changes: Add a log message while clearing USCM stats

  - FCD-XXX: qla2xxx: USCM: VL-Reset FC device virtual lane priority to normal on a port flap
  Changes: Reset the virtual lane to normal on a port flap, ISP reset

  - FCD-XXX: qla2xxx: USCM: VL-Set target congestion before switching lanes
  Changes: Set the target state before the lane switch.

  - FCD-1752: qla2xxx: USCM: VL-Sysfs does not show Virtual Lane as enabled
  Changes: extended flogi_acc can also be parsed correctly.

  - FCD-1652: qla2xxx: Check if port is online before sending ELS
  Changes: Check if port is online before sending ELS

  - FCD-XXX: scsi: qla2xxx: Synchronize rport dev_loss_tmo setting

  - 10.02.08.00.a1-k1 BH 05/27/2022
  - FCD-XXX: qla2xxx: USCM: Virtual Lane, Fix PUN handling
  Changes: Have a default priority range for each lane and ensure that the range is programmed correctly

  - FCD-XXX: qla2xxx: USCM: Support for Virtual Lanes
  Changes: Enable Virtual Lane support for Cisco switch

  - 10.02.07.00-k1 BH 05/27/2022
  - Non-alpha build

  - 10.02.07.00.a19-k1 BH 05/21/2022
  - FCD-XXX : qla2xxx: USCM: Throttling is not honored for NVMe
  Changes: Enable NVMe READ/WRITE commands to be throttled

  - FCD-XXX: qla2xxx: USCM: Add counters to track directional throttling
  Changes: Add sysfs counters to have stats displayed for busy status returns.

  - FCD-1801: qla2xxx: USCM: CP reads go to zero while doing directional throttling
  Changes: Take into account the directional queue depth while returning a busy status to the stack.

  - FCD-1809: qla2xxx: USCM: Restoring USCM Profile to default result in driver

  - FCD-1798: qla2xxx: USCM: Profiles are not honored for peer congestion
  Chnages: Apply the profile to each target (fcport) when the profile is changed.

  Reverting the following changes:
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.

  - 10.02.07.00.a18-k1 BH 05/12/2022
  - FCD-1484: qla2xxx: Manufacturer details should be "Marvell Semiconductor, Inc."
  Changes: Update Manufacturer details to indicate Marvell Semiconductors

  - FCD-XXX: qla2xxx: USCM: Throttle only read and write commands
  Changes: Throttle only read and write commands.

  - FCD-XXX: qla2xxx: USCM: Do not clear throttle for Clear Cong FPIN.
  Changes: Do not clear throttle when Clear Congestion FPIN is received.

  - FCD-XXX: qla2xxx: USCM: Change default profile to Monitor
  Changes: Set the default throttle profile as Monitor.

  - FCD-XXX: qla2xxx: Fix few issues reported by klocwork tool

  - 10.02.07.00.a17-k1 BH 05/06/2022
  - FCD-1522: qla2xxx: USCM: Throughput drops to zero in Monitor mode
  Changes: Restore qdepth based on monitor mode

  - FCD-1315: qla2xxx: Fix erroneous mailbox timeout after pci error inject.
  Changes: Clear wait for MB interrupt flag to prevent stale MB completion arriving

  - FCD-1424: Remove verbose IO debug messages
  Changes: Remove the IOCB debug messages for every IO

  - FCD-XXX: Support for NVMe parameters in Auxiliary Image Status
  Changes: Added new structure member, bit define and image status check.

  - 10.02.07.00.a16-k1 BH 04/08/2022
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.

  - FCD-1221: qla2xxx: USCM: Switch does not send FPINs after a EDC re-negotiation
  Changes: Send Link Service Request Information wih the EDC response, along with the other descriptors.

  - 10.02.07.00.a15-k1 BH 03/25/2022
  - FCD-1249: qla2xxx: edif: Fix dropped IKE message.
  Changes: Fixes IKE message being dropped due to error in
  processing Purex IOCB and Continuation IOCBs.

  - FCD-1457: qla2xxx: Zero undefined mailbox IN registers
  Changes: Set zero to unuse register's value while requesting a new MB command.

  - FCD-1425: qla2xxx: USCM: Seconds since last event showing incorrect value
  Changes: Calculate delta time correctly

  - FCD-1287: qla2xxx: Fix incorrect display of max frame size.
  Changes: Save off the field of interest into separate location and convert into words.

  - FCD-XXX: qla2xxx: Fix memory leak when reading tgt_port_database debugfs file
  - FCD-XXX: qla2xxx: USCM: Do not reset SCM stats on a link bounce/ISP reset

  - 10.02.07.00.a14-k1 BH 03/14/2022
  - FCD-XXX: qla2xxx: Fix losing FCP-2 targets on long port disable with IOs
  Changes: Fix this by accepting RSCN when the device is not online.

  - FCD-XXX: qla2xxx: Fix losing target when it reappears during delete
  Changes: Fix the issue by adding state checks before proceeding.

  - FCD-XXX: qla2xxx: Fix losing FCP-2 targets during port perturbation tests
  Changes: Fix was to ignore delete for FCP-2 devices in certain sequence.

  - FCD-119: qla2xxx: Fix crash due to stale srb access around IO timeouts
  Changes: Ensure srb is either returned during error IO timeout error escalation.
  If that is not possible fail the escalation path.

  - FCD-1132: qla2xxx: HPE3PAR: Fix IOCB resource count leak
  Changes: Decrement FW IOCB resource count.

  - FCD-1132: qla2xxx: Turn off MQ for 8G adapter.
  Changes: For 8G adapter, multi queue was enabled accidentally.

  - FCD-1385: Wind down adapter after pcie error.
  Changes: Detect the PCIE error and returns all IO's to upper layers.

  - FCD-1412: qla2xxx: Reset Congestion Warning/Alarm signals count.
  Changes: Reset signals at every signal check boundary (1 sec).

  - 10.02.07.00.a13-k1 BH 02/17/2022
  - FCD-1353: qla2xx: a12/a11 driver compilation gives warning messages
  Changes: Fix the fall through warning
  - FCD-1342: qla2xxx: SL12SP5 a12 driver compilation issue observed
  Changes: fallthrough macro is defined based on gcc version.

  - 10.02.07.00.a12-k1 BH 02/09/2022
  - FCD-XXX: qla2xxx: Reset USCM stats/state and throttling on RSCN
  Changes: Reset USCM stats on getting an RSCN indicating a target port down.

  - FCD-XXX: qla2xxx: Increase max limit of ql2xnvme_queues
  Changes: Increase max limit of ql2xnvme_queues to (max_qpair-1)

  - FCD-478: qla2xxx: Fix missing devices on a LOGO from F-Port
  Changes: A call to logo all ports is made upon a F-Port LOGO.

  - FCD-XXX: qla2xxx: Move NVMe traffic to the slow queue on target congestion
  Changes: Steer the NVMe traffic to the slow Q on encountering target congestion

  - FCD-348: qla2xxx: edif: Fix slow session tear down.
  Changes: As a work around, driver would trigger a session tear down where
  it tell the local authentication application to also tear down.

  - FCD-XXX: qla2xxx: edif: Tweak debug log.
  Changes: Print AUTH ELS header to assist in debugging session's state of authentication app.

  - FCD-207: qla2xxx: Fix stuck session of prli reject
  Changes: Remove the stale code that cause the unintentional short cut.

  - FCD-1197: qla2xxx: Throttling up is seen when port is down
  Changes: Reset the stats/congestion state and the throttling algorithm on a link down event.

  - FCD-348: qla2xxx: Reduce false trigger to login
  Changes: Reduce the extra trigger to prevent multiple login to the same session.

  - FCD-207: qla2xxx: edif : Reduce N2N thrashing at app_start time
  Changes: make sure the old session is torn down before triggering a relogin.

  - FCD-207: qla2xxx: Fix laggy FC remote port session recovery
  Changes: allows the higher priority error recovery to run first before running
  the lower priority heart beat check.

  - FCD-XXX: qla2xxx: edif: Fix no logout on delete for n2n
  Changes: Set a flag to turn on implicit logout early in the session recovery
  to make sure it would go out in case of error.

  - FCD-348: qla2xxx: edif: fix session thrash 2
  Changes: prevents prli from going out before authentication app gives the ok

  - FCD-348: qla2xxx: edif: tear down session if keys has been removed
  Changes: If all keys for a session has been deleted then trigger a session tear down.

  - FCD-348: qla2xxx: edif: fix no login after app start
  Changes: Add a re-login trigger to relogin.

  - FCD-207: qla2xxx: Fix hang due to session stuck
  Changes: Break the requeue cycle and exit. The session deletion code will trigger a session relogin.

  - FCD-348: qla2xxx: edif: reduce disruption due to multiple app start
  Changes: Driver will skip over session tear down if app start is seen more than once.

  - FCD-348: qla2xxx: edif: send logo for unexpected ike msg
  Changes: Terminate/cleanup the AUTH ELS exchange.Follow with a pass through LOGO.

  - FCD-348: qla2xxx: edif: Fix IO timeout due to over subscription
  Changes: Track IOCB resources to prevent over subscription of IOCB resources

  - FCD-207: qla2xxx: edif: fix n2n login retry for secure device
  Changes: Add a few more login retries to revive the connection.

  - FCD-1205: qla2xxx: Fix disk failure to rediscover
  Changes: Set the online state before reporting to UL of the availability of the session.

  - FCD-207: qla2xxx: Fix n2n inconsistent plogi
  Changes: Delete the session to restart the connection, where ELS pass through
  PLOGI would be used consistently.

  - FCD-1267: qla2xxx: Fix crash during module load unload test
  Changes: Driver correctly freeing a pre-allocated structure for purex packet handling

  - FCD-XXX: qla2xxx: Fix missed DMA unmap for NVME ls requests.
  Changes: Add an unmap call during ELS completion.

  - FCD-1266: qla2xxx: Fix loss of NVME namespaces after driver reload test
  Changes: Calling the localport registration under a mutex

  - FCD-1212: qla2xxx: Host does not retry RDF when retries are exhausted and there is an incoming RDF
  Changes: Reset the SCM ELS counters to zero once an RDF is received.

  - FCD-XXX: qla2xxx: Restrict CPU-qpair mapping to work for NVMe only
  - FCD-XXX: qla2xxx: Change throttle up logic to be more aggressive.
  - FCD-XXX: qla2xxx: SCM: Add a bitmap for FPIN events.

  - 10.02.07.00.a11-k1 BH 01/17/2022
  - FCD-738: Fix T10 DIF performance on high end setup
  Changes: Added high performing CRC-1 interface

  - FCD-1182: qla2xxx: Fix initrd build error on RHEL 9
  Changes: Updated the build script specific to RHEL 9

  - FCD-XXX: qla2xxx: Fix incorrect latency counter display
  Changes: Fix this by ignoring I/Os with unusually high latencies.

  - FCD-207: qla2xxx: Fix n2n discovery issue with secure target
  Changes: On app_start, driver will reset the login retry attempt count.

  - FCD-1180: qla2xxx: Use correct feature type field during rffid processing
  Changes: Driver sends RFF_ID for initiator type 28 i.e. NVMe insteads of SCSI two times

  - FCD-1159: qla2xxx: Host doesn't retry the RDF/EDC when jammed with idle/CRC
  Changes: Wake up the DPC thread from the timer context when EDC/RDF needs to be

  - FCD-XXXX: qla2xxx: Build module with "-mindirect-branch=thunk-extern" option on RHEL 9

  - 10.02.07.00.a10-k1 BH 01/06/2022
  - FCD-XXX: qla2xxx: Support for changes in kernel 5.6 and above(rhel9.0)
  Changes: Changes made specific to rhel9.0

  - FCD-1136: qla2xxx: Throttling occurs even when USCM is disabled via CLI
  Changes: Update flags that control USCM features, correctly on ISP reset

  - FCD-1160: USCM continues to be active even if RDF response is jammed (and failed)
  Changes: USCM flags are updated properly when port toggle and RDF completion happen

  - 10.02.07.00.a9-k1 BH 01/03/2022
  - FCD-1154: qla2xxx: Fix incorrect reporting of task management failure
  Changes: Corrected endianness.

  - 10.02.07.00.a8-k1 BH 12/23/2021
  - FCD-814 : qla2xxx: Add a new v2 dport diagnostic feature.
  Changes: Buffer size is increased to 1024 bytes and handle START/RESTART
  command received from SDMAPI.

  - FCD-XXX: qla2xxx: Change throttle up logic to be more aggressive.
  Changes: Ramp up to faster initially, to get closer to the sweet spot quicker.
  Be less prone to operating at lower bandwidth in case of a sudden workload spike.
  Operate more conservatively (prioritize self over the network).

  - FCD-XXX: qla2xxx: Do not track SCM stats for all ports in the zone
  Changes: Track SCM stats just for the host and the target

  - FCD-XXX: qla2xxx: Stats for FPIN with event type "Lost Credit" not incremented.
  Changes: Add incrementing of "Lost Credit" stats.

  - FCD-684: qla2xxx: Fix link down when connected to AG fabric with FAA enabled
  Changes: Remove setting PUN and VL support bits in init control block.

  - FCD-1004: qla2xxx: Debug message improvement when changing SCM profile.
  Changes: Use profile names when changing profiles

  - FCD-868: qla2xxx: lockdown: "Unsupported Firmware" message
  Changes: checked different BITs for checking lockdown feature.

  - FCD-682: qla2xxx: tcm_qla2xxx driver load fails with "Invalid argument" error
  Changes: As tcm_qla2xxx is untested/unused, make it a dummy driver
  and reduce unncessary noise created by this.

  - FCD-886: qla2xxx: Hard Lockup on Unload/Load task with serial log enabled
  Changes: Hard lockup is seen because serial console driver crashed because of
  excessive logging. It was finalized to document this as known issues.

  - FCD-XXX: qla2xxx: Apply USCM profile change immediately

  - 10.02.07.00.a7-k1 BH 11/05/2021
  - FCD-926: qla2xxx: lockdown: lower debug severity messages
  - FCD-824: qla2xxx: lower debug severity message for fw lockdown
  Changes: This patch lower the severity of various log messages.

  - FCD-XXX: qla2xxx: Send LS_ACC for an incoming RDF
  Changes: Send the LS_ACC and the new RDF separately

  - FCD-721: qla2xxx: Set Max queue depth based on data direction.
  Changes: Max q depth for Initiator tracks Reads (per port) and Fcport tracks Writes (per fcport).

  - FCD-701: qla2xxx: Fix device reconnect in loop topology
  Changes: Fix by taking the main login path that acquires device handle.

  - FCD-XXX: qla2xxx: Add ql2xnvme_queues module parameter to configure number of NVME queues


  - 10.02.07.00.a6-k1 BH 10/08/2021
  - FCD-786: Shown wrong FDMI data for 64G adaptor
  Changes: qla2xxx: Corrected transmission speed mask values for FC

  - FCD-717: add retry for exe fw
  Changes: qla2xxx: Driver will retry Exec FW command up to 4 retries

  - FCD-XXX: qla2xxx: Compile out map queue changes if present in nvme-fc

  - 10.02.07.00.a5-k1 BH 10/01/2021
  - FCD-740: Fix scheduling while atomic
  Changes: qla2xxx: schedule the call to fc_remote_port_delete in non-interrupt context

  - FCD-691: Fix premature hw access after pci error
  Changes: qla2xxx: Check error condition still persist and/or wait until the OS to give the resume signal

  - FCD-756: Fix excessive messages during device logout
  Changes: qla2xxx: disable printing IO error messages by default

  - FCD-XXX: qla2xxx: abort fw dump if soft reset fail
  - FCD-XXX: qla2xxx: USCM: Retry USCM ELS for Logical busy error code
  - FCD-XXX: qla2xxx: USCM: USCM profile reset to Driver defaults
  - FCD-XXX: qla2xxx: Fix warning message due to adisc is being flush at /var/log/messages

  - 10.02.07.00.a4-k1 BH 09/20/2021
  - FCD-721: Revert code that keeps track of queue-depth directionally.
  Reason: Observing issue while q-depth accounting

  - FCD-XXX: Cleanup stale code.
  Changes: qla2xxx: Remove unused experimental code that uses
  explicit PRLO as a way to tear down session.

  - FCD-XXX: edif: remove old doorbell interface
  Changes: qla2xxx:driver has implemented a new doorbell mechanism via bsg.

  - FCD-348: edif: add retry for els pass through
  Changes: qla2xxx: edif: Add additional retries to reduce higher level recovery.

  - FCD-XXX: edif: Synchronize NPIV deletion with authentication application
  Changes: qla2xxx: Notify authentication application of a NPIV deletion event is about to occur.

  - FCD-XXX: edif: Fix potential stuck session in sa update
  Changes: qla2xxx: Set flag properly for any attempt to relogin.

  - FCD-704: The external flag for tcm_qla2xxx was not set.
  qla2xxx: Add tcm_qla2xxx to externally supported module list.

  - 10.02.07.00.a3-k1 BH 09/08/2021
  - FCD-XXX: qla2xxx: edif: wait for app to ack on sess down
  Changes: On session deletion, wait for app to acknowledge before moving on.

  - FCD-XXX: qla2xxx: edif: fix edif bsg
  Changes: Properly fill out the reply_payload_rcv_len field.

  - FCD-XXX: qla2xxx: edif: fix inconsistent check of db_flags
  Changes: Replace value check with bit flag check.

  - FCD-XXX: qla2xxx: edif: increase ELS payload
  Changes: Adjust memory buffer size to be able to handle max ELS payload.

  - FCD-343: qla2xxx: turn off target reset during issue_lip
  Changes: driver sends additional target reset to remote device before resetting the link.

  - FCD-XXX: qla2xxx: edif: Reduce Initiator-Initiator thrashing.
  Changes: Reduce unnecessary stress for authentication application to deal with unused connections.

  - FCD-XXX: qla2xxx: fix gnl list corruption
  Changes: move lock deletion behind lock.

  - FCD-XXX: qla2xxx: edif: flush stale events and msgs on session down
  Changes: Prevents authentication application from having to process stale data.

  - FCD-XXX: qla2xxx: edif: reduces thrashing of the connection.
  - FCD-XXX: qla2xxx: edif: tweak trace message
  - FCD-XXX: qla2xxx: edif: fix app start delay
  - FCD-XXX: qla2xxx: USCM: Handle SCM ELS from switch
  - FCD-XXX: qla2xxx: edif: fix app start fail

  - 10.02.07.00.a2-k1 BH 09/02/2021
  - FCD-156: qla2xxx: 3PAR: Fix out of bound mem access
  Changes: Add additional check to make sure the range of memory

  - FCD-624: qla2xxx: Source driver gives compilation error on RHEL8.5
  Changes: Offending code on tcm_qla2xxx module has been removed

  - FCD-xxx: qla2xxx: Fix use after free
  Changes: Would check for command is aborted / completed by FW before exiting the call.

  - ER148553: qla2xxx: relogin during fabric disturbance
  Changes : Set the scan_need flag to indicate a session

  - FCD-464: qla2xxx: Fix race between timeout handler and completion handler
  Changes: One reference is taken for the normal code path and one for the timeout path

  - FCD-453: Fix FC-NVME register localport failure.
  Changes: Module initialization is added to nvme_fc_port_template

  - FCD-XXX: qla2xxx: Process responses in Tx path if any available for better performance
  Changes: Call process_response_queue() in Tx path

  - FCD-492: Kernel crashes when accessing port_speed sysfs file
  Changes: CNA: Fix this by changing the lookup.

  - FCD-XXX: qla2xxx: Refactor asynchronous command initialization
  - FCD-XXX: qla2xxx: USCM - Add profile support for throttling IO
  - FCD-XXX: qla2xxx: Move heart beat handling from dpc thread to workqueue
  - FCD-XXX: USCM: Enhancement to throttle only read traffic during host congestion
  and write traffic during target congestion.

  - 10.02.07.00.a1-k1 BH 08/22/2021

  - FCD-124: qla2xxx: edif: Use link event to wake up app
  Changes: The link up event would notify app of the present of a new SCSI Host.

  - FCD-299: qla2xxx: Fix crash in NVME abort path
  Changes: Fixed the issue by removing stale access.

  - FCD-XXX: qla2xxx: Display 16G only as supported speeds for 3830c card.
  Changes: This card doesn't support lower speeds, hence,
  update the fdmi and sysfs fields to display 16G only.

  - FCD-226: qla2xxx: Update details for building kdump initrd in NVMe BFS.
  Changes: Currently inbox driver doesn't support kdump/kexec kernel,
  hence user need to update kdump initrd to have OOB driver part of it.

  - FCD-372: qla2xxx: Anomaly in the congestion stats
  Changes: Clear the signal counter on a qaucli clear

  - FCD-279: Request QCC to check/report adapter's MCTP state
  Changes: qla2xxx: Add support for mailbox passthru

  - FCD-XXX: Perf improvement: Pick qpair such that Tx and Rx are processed on same CPU.
  Changes: qla2xxx: Select qpair depending on which CPU post_cmd() gets called

  - FCD-XXX: scsi: qla2xxx: Reserve extra IRQ vectors

  - 10.02.06.02-k1 BH 08/11/2021
  - FCD-511: Path does not go into "Marginal" state on receiving FPIN-LI
  Change: qla2xxx: Pass the LI events to the scsi_transport_fc

  - 10.02.06.01-k1 BH 07/27/2021
  - ERXXXXXX: qla2xxx: Check for firmware capability before creating QPair.
  Change: Move the check for FW attributes to right location. This check
  is specific for ISP25XX.

  - 10.02.06.00-k1 BH 07/21/2021
  - ERXXXXXX: qla2xxx: Version number is changed from 10.02.06.00.a1-k1
  to 10.02.06.00-k1

  - 10.02.06.00.a1-k1 BH 06/29/2021
  - FCD-297: Fix NVME session down detection
  Change: qla2xxx: Session tear down and allow relogin to re-drive
  the connection under condition

  - ER148553/FCD-156: Fix NVME retry
  Change: qla2xxx: Alternate back and forth on every PRLI failure
  until login retry count has depleted or it is succeeded.

  - FCD-316: System crash when number of CPUs forced to 2
  - Change: qla2xxx: Sync queue idx with queue_pair_map idx.
  This fix needs both commits released on 10.02.05.00-k
  and 10.02.06.00.a1-k against FCD-316

  - ERXXXXXX: qla2xxx: Readme: Update OS details that supports NVMe BFS.
  - ERXXXXXX: qla2xxx: Readme: Remove workaround of forcing of INTa
  mode for kdump kernel.

  - ERXXXXXX: qla2xxx: Readme: Update OS details that supports NVMe BFS.


  - FCD-316: System crash when number of CPUs forced to 2
  Changes : qla2xxx: prevents unbalanced QP allocation where nr_hw_queues
  is two less than the number of CPUs.
  This fix needs both commits released on 10.02.05.00-k
  and 10.02.06.00.a1-k against FCD-316

  - FCD-268: Multiple USCM ELS are sent
  - FCD-280: Fix issues reported by running a few Jammer tests
  Changes: qla2xxx: Retry the USCM ELS 3 times when there are failures.

  - FCD-172: build.sh: Fix udev script installation error

  - ER148402: Install restrictions when binary rpm is already installed.
  Changes: qla2xxx: Updated README file for documentation

  - ERXXXXXX: qla2xxx: Support kdump kernel for NVMe BFS.
  - ERXXXXXX: qla2xxx: Update README file for building kdump initrd in NVMe BFS.

  - ER148402: Disallow install if qla2xxx rpm is installed.
  Changes: qla2xxx: Prevent install from source if rpm is installed.

  - FCD-230: Add additional debug logs
  Changes: qla2xxx: Add additional logs to differentiate between
  FW driver and driver driven ELS

  -FCD-XXXX: Changes to support kdump kernel.
  Changes: qla2xxx: Don't allocate fw dump for kexec kernel and
  Allocate single Q for kexec kernel.

  - FCD-227: Linux Driver order of RDF to follow EDC ELS

  - FCD-225 - Qaucli fails to list scm stats for Qlipper

  - FCD-172: fix udev rule
  Changes: qla2xxx: permission of the rule file set to 644
  - ER148529: NVMe initiator connected to brocade fabric are down
  Changes: qla2xxx: Fix hang on NVME command timeouts.

  - ER148531: SN1600Q/SN1610Q, Gen10PlusSnap4 - Async-login failed errors on BFS boot-up-QXCR1001796980
  Changes: qla2xxx: Suppress unnecessary log messages during login

  - ER148578: Observed that initiator is sending prli type 0x8 for for nvme ports
  Changes: qla2xxx: fix NVME | FCP personality change.

  - ER148141: Driver vmkmgt: Don't differentiate Signals and FPIN's for the Congestion counters when they detected.
  Changes: qla2xxx: Split congestion warnings and alarms based on signals and FPINs

  - ERXXXXXX: Add support for marginal path.
  Changes: qla2xxx: Added support for eh_should_retry_cmd callback in qla2xxx host template.

  - ERXXXXXX: scsi: qla2xxx: Flush all sessions on zone disable
  - ERXXXXXX: scsi: qla2xxx: Fix memory size truncation
  - ERXXXXXX: scsi: qla2xxx: Fix a NULL pointer dereference in an error path
  - ERXXXXXX: qla2xxx: fix sparse warning.
  - ERXXXXXX: qla2xxx: edif: do secure plogi when auth app is present
  - ERXXXXXX: qla2xxx: Add license.
  - ERXXXXXX: qla2xxx: USCM - Do not send EDC/RDF ELS when firmware has already sent it
  - ERXXXXXX: qla2xxx: Inclusion words are applied on release note and readme file
  - ERXXXXXX: qla2xxx: edif: add N2N support for EDIF
  - ERXXXXXX: qla2xxx: Updated drelease.notes header
  - ERXXXXXX: qla2xxx: Fix hang during NVME session tear down.
  - ERXXXXXX: qla2xxx: USCM: Cleaned up a few debug messages
  - ERXXXXXX: qla2xxx: edif: fix edif enable flag

  - ER148546: USCM: QCC Cong Mgmt not available on port with FW:v9.07.00 and DVR:v10.02.05.00.a6-k
  Changes: qla2xxx: setting the flags to indicate to the application that the RDF is complete and
  SCM is supported.

  - ERXXXXXX: Add heartbeat check
  Changes: qla2xxx: Use 'no-op' mailbox command to check to see if FW is still responsive.

  - ERXXXXXX: DEBUG: simulate FW hang.
  Changes: qla2xxx: Driver will detect the hang and recover via hearbeat check.

  - ERXXXXXX: qla2xxx: Check for FW attributes before enabling MQ.
  - ERXXXXXX: qla2xxx: USCM Handle ELS errors from switch by retrying 3 times
  - ERXXXXXX: scsi: qla2xxx: Correct the supported speeds for 16G Mezz card.


  - ER148472: With NPIV ports, link bounce causes loss of strongSwan session at the target.
  Changes: qla2xxx: : fix npiv create errorneous error
  qla2xxx: EDIF: reject AUTH ELS on session down.
  qla2xxx: edif: Fix stale session

  - ER148478: System Crash while NPIV RAW IO ON VPORT LUNS on SLES15 SP3 + QLE 2692 + R7525
  Changes: qla2xxx: fix unsafe removal from link list.

  - ERXXXXXX: qla2xxx: USCM - Send EDC and RDF ELS from the driver

  - ER147707: Device recovery not happening and OS hungs on qla2xxx
  Changes: qla2xxx: v2: fix crash in PCIe error handling
  - ER148123: Issue with Max secure connection with override_lower_limits
  Changes: qla2xxx: v2: fix stuck session
  - ER148402: SLES, Driver Install location is inconsistent.
  Changes: qla2xxx: Fix driver install location for SLES

  - ER148123: Issue with Max secure connection with override_lower_limits
  set and rekey/reauth with240/480-luns disconnected after 2 hr traffi
  Changes: qla2xxx: edif: doorbell tweak

  - ER148448: Issue w.r.t qaucli, where Remote type "Unknown" for eDIF env.
  for qaucli2.4.0.build 20
  Changes: qla2xxx: fix port type info

  - ER148433: The log does not show a valid data rate while the link speed is 64G.
  Changes: qla2xxx: fix debug print of 64G link speed.

  - ER147650: 'show fdmi? command does not list ? OS Name and Version?
  parameter for SLES12SP4-QXCR1001771822
  Changes: qla2xxx: Show OS name and version in FDMI-1
  - ER147707: Device recovery not happening and OS hungs on qla2xxx
  Changes: qla2xxx: fix mailbox recovery during PCIE error
  qla2xxx: v2: fix crash in PCIe error handling
  - ERXXXXXX: qla2xxx: Changes to support FCP2 Target.
  - ERXXXXXX: qla2xxx: include AER debug mask to default
  - ERXXXXXX: qla2xxx: fixes for compilation on RH8.4
  - ERXXXXXX: qla2xxx: Do logout even if fabric scan retries got exhausted.

  - 10.02.05.00.a1-k1 BH 02/27/2021
  - EDIF Changes:
  - ER148247: issue with nvme-npiv env, once we delete npivs, after a while,
  it is reducing strongswan connections.
  Change: free sa index during npiv delete

  - ER148123: Issue with Max secure connection with override_lower_limits set
  and rekey/reauth with240/480-luns disconnected after 2 hr traffi
  Change: adjust online|offline notification to app and
  tweak LOGO on session down.
  - ERXXXXXX: qla2xxx: edif: tweak log message
  - ERXXXXXX: qla2xxx: edif: Redundant code (already set in qla_edb_node_alloc)

  - ER147707: qla2xxx: Device recovery not happening and OS hungs on qla2xxx
  Change: Fix RISC RESET completion polling.

  - ER148111: qla2xxx: FCPowerKit reflects huge delays in CMDlets execution.
  Change: Check lockdown functionality before requesting lockdown feature.

  - ER148277: USCM: Linux Peer showing misleading 'Congested, throttling down,
  permitted: 1', prior to 'Reached low watermark, permitted: 2':
  - Change: Fix misleading debug message

  - ERXXXXXX: adjust request/respond queue size for 28xx
  - ERXXXXXX: qla2xxx: Change %p to %px in the log messages.

  - 10.02.01.00.a15-k1 BH 11/12/2020
  ERXXXXXX: qla2xxx: Updated README file for new module parameters

  - 10.02.01.00.a14-k1 BH 11/06/2020

  - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh
  Change: qla2xxx: Fix crash in qla_nvme_abort_set_option.

  - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN).
  Change: qla2xxx: Handle aborts correctly for port undergoing deletion.

  - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure.

  - 10.02.01.00.a13-k1 BH 10/28/2020

  - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities
  Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up.

  - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config
  Change: qla2xxx: fix N2N + NVME connect retry fail

  - ER147832: Issue with uSCM Linux with QCC CLI for some configuration
  Change: qla2xxx: Show event severity only when device state is congested.

  - ER147824 : scmr_stat sysfs node runs out of memory
  Change: qla2xxx: Come up with a compact version of scmr_stat

  - ER147823: NVMe IO is not getting throttled up or down.
  Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion.

  - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo.
  - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters.
  - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo.
  - ERXXXXXX: qla2xxx: Move an SCM log under a debug level.
  - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value.
  - ERXXXXXX: qla2xxx: Make throttling messages more informative.

  - 10.02.01.00.a12-k1 SK 10/15/2020
  - ER147625: NVMe IO's are failing with Read/Write after LIP reset.
  Change: qla2xxx:Return EBUSY until the remote port delete finishes.

  - ER147653: Target side strongswan start/stop, make initiator crashed.
  Change: qla2xxx: edif: v2 fix double bsg done.

  - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats.
  Change: qla2xxx: Clear Sev and NVMe Target Stats.

  - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored.
  Change: qla2xxx: Fix Throttling algorithm regression.

  - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures.
  Change: qla2xxx: Throttle NVMe I/O commands only.

  - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode.
  - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api.
  - ERXXXXXX: qla2xxx: edif: fix 4byte align.
  - ERXXXXXX: qla2xxx: edif: fix ELS meta data.
  - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset.
  - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear.

  - 10.02.00.02.a11-k1 BH 10/09/2020
  - ER147734 : Lip reset on the isolated port causes server crash
  Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port.

  - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed.
  Change: qla2xxx: Fixes for big endian machines

  - ER147646: Call Trace observed while validating a MPI Pause test scenario.
  Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option.

  - ER147615: Throttling does not work with low I/Os.
  Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters

  - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters
  - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp.
  - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command.
  - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing

  - 10.02.00.02.a10-k1 BH 09/25/2020
  SCM Changes:
  - ERXXXXXX:
  Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down.
  qla2xxx: throttling algorithm improvement.
  qla2xxx: Add throttling support for NVMe targets.

  EDIF Changes:
  - ERXXXXX: LUN loss on ipsec stop/start on target side.
  Change: save Nport on receive of PLOGI
  - ERXXXXX: fix ELS receive collision between physical and NPIV hosts.
  Change: remove erroneous source Nport ID search.

  - ER147570: FCP Performance Drop in latest driver for smaller IOs size.
  Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure.

  - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12
  Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it.

  - ER147418: server crash seen when trying to capture the debugfs stat on isolated port.
  - ER147645: System panic while trying to capture debugfs stats for EED.
  Change: qla2xxx: Check rport before accessing target number.

  - ER147632: Fix potential stale mem access
  Change: remove stale sp pointer reference

  - CQXXXXXX: FPIN events are not readily decodable.
  Change: qla2xxx: Make FPIN events prints human readable.

  - ER146879: Add support to clear SCM Stats
  Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters

  - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset.
  - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only.
  - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation.
  - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec.
  - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command.
  - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API.
  - ERXXXXXX: qla2xxx: lockdown: fix stale sp access.
  - BZ1868688: qla2xxx: tear down session if FW say its down.

  - 10.02.00.02.a9-k1 BH 09/03/2020
  - ER147554 - sg_reset appears hung iterating over too many Qpairs.
  Change - qla2xxx: limit interrupt vectors to number of cpu.

  - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed.

  - ERXXXXX - qla2xxx: Change post del message from debug level to log level.

  - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test.

  - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call.

  - ERXXXXX - Added Structural changes for SCM Phase 2 support.
  Change : qla2xxx: Update structure definitions for SCM to support backward compatibility.

  - 10.02.00.02.a8-k1 BH 08/30/2020
  - ERXXXXXX - Fix point-to-point (N2N) device discovery issue.
  Change - qla2xxx: Fix point-to-point (N2N) device discovery issue.

  - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe.
  Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe.

  - ER147523 - BSG stack trace and SCM display issues.
  Change - SCM: Functional regression with a6 release.

  - ER 147413 - edif: Fix issue with DIF enable target discovery.
  Change - qla2xxx: edif: Fix issue with DIF enable target discovery.

  - ER147480 clear ASYNC_ACTIVE flag to allow relogin.
  Change - qla2xxx: fix stuck session.

  - ERXXXXXX - lockdown: add mpi flash lock down support
  Change - qla2xxx: lockdown: add mpi flash lock down support

  - 10.02.00.02.a7-k1 BH 08/22/2020
  - ER147495 - edif changes
  Change - qla2xxx: edif: fix nvme discovery failure
  qla2xxx: edif: fix els corruption.

  - ER147478 - SLES 15sp1 10.02...a6-k compile warning
  Change - qla2xxx: Compilation changes for sles15sp1

  - ERXXXXXX - add mpi flash lock down support
  Change - qla2xxx: lockdown: add mpi flash lock down support
  qla2xxx: lockdown: fix compile problem. do not submit

  - ERXXXXXX: SCMR changes
  Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting.
  qla2xxx: SCM: Changes to separate current_events and current_state.
  qla2xxx: SCMR: Increase local array size.

  - ER147298 : USCM "Congestion Warning" counter regression
  Change - qla2xxx: Correct FPIN Structure Definition (Severity).

  - 10.02.00.02.a6-k1 BH 08/13/2020
  - ERXXXXXX - fix crash on session cleanup + unload.
  Change - qla2xxx: fix crash on session cleanup + unload.

  - ER147329 - edif changes
  Change - qla2xxx: edif: fix compile error. do not submit
  qla2xxx: edif: fix double free on ELS send failure.
  qla2xxx: edif: reject els if non secure device.
  qla2xxx: edif: reject ELS on session down.
  qla2xxx: edif: redefine purex dest addr to be more consistent.
  qla2xxx: edif: tweak debug messages.
  qla2xxx: edif: fix nvme+edif target connect problem.

  - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver
  Change - qla2xxx: edif: move bsg auth els into separate routine.
  qla2xxx: edif: Fix error in BSG ELS path that has valid response data.

  - ER147312 - Add support to report MPI FW state.
  Change - qla2xxx: Add support to report MPI FW state.
  qla2xxx: Fix reset of MPI firmware.
  qla2xxx: Fix MPI reset needed message.

  - ER147437 - With a5 driver observed warning messages.
  Change - qla2xxx: Compilation changes for Citrix, rhel and sles.

  - 10.02.00.02.a5-k1 BH 07/31/2020
  - ER147418: server crash seen when trying to capture the debugfs stat on isolated port.
  Change - qla2xxx: Don't process target debugfs stats if port is isolated.

  - ERXXXXXX : Add SCM stats to scmr_stats node.
  Change - qla2xxx: Add SCM stats to scmr_stats node.

  - ER147419 : Fix crash due to request q pointer extraction failure.
  Change - qla2xxx: Latency measurement patch.

  - ERXXXXXX : edif: remove redundant field in port_id_t
  Change -qla2xxx: edif: remove redundant field in port_id_t

  - ER147331 - extract bbc from PLOGI template payload.
  Change -qla2xxx: Fix buffer-buffer credit extraction error

  - ERXXXXXX : Split qla2x00_configure_local_loop()
  Change scsi: qla2xxx: Split qla2x00_configure_local_loop()

  - ERXXXXXX : SCMR - Add I/O flow control.
  Change - qla2xxx: SCMR - Add I/O flow control.

  - 10.02.00.02.a4-k1 BH 07/23/2020
  - ER147402 - Do not install nvme auto connect script if OS is installing it.
  Change - qla2xxx: auto-connect scripts are install based on nvme-cli package.

  - ERXXXXXX - Fixed return status of nvme fcp request.
  Change - qla2xxx: Set NVME status code for failed NVME FCP request.

  - ERXXXXXX - Multi-que support for TMF.
  Change - qla2xxx: Multi-que support for TMF.

  - ERXXXXXX ? edif changes
  Change - qla2xxx: edif: simplify reserve/release of sa_index.
  qla2xxx: edif: tweak debug log.
  qla2xxx: edif: adjust ELS resp length.
  qla2xxx: edif: send logo on app stop.
  qla2xxx: edif: remove prlo in session deletion.
  qla2xxx: edif: Fix app stop stall.

  - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver.
  Change - qla2xxx: Correct fpin_descriptor definition.
  qla2xxx: Consolidate EDIF & SCM Purex Calls.

  - ERXXXXXX - Calculate avg. time taken by different components for IO completion.
  Change - qla2xxx: Latency measurement patch.

  - 10.02.00.02.a3-k1 BH 07/16/2020
  - ER147348 - Observing firmware dump while running qaucli -g post port isolation.
  Change - qla2xxx: Don't check firmware state in case of chip is down.

  - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported.
  Change - qla2xxx: Add support for loading external modules on SuSE.

  - ER147361 - System panic after enabling port isolated during TimeOutReset.
  Change - qla2xxx: Synchronize the update the host counters using lock.

  - ER147370 - Hardware Error counter not incrementing for MBX command timeout.
  Change - qla2xxx: Update hardware error count for various error conditions.

  - ERXXXXXX - The change is to help in debuggging.
  Change - qla2xxx: Move some messages from debug to normal log level.

  - ER147346 - Observed a call trace after port isolation.
  Change - qla2xxx: Fix the call trace for flush workqueue.

  - ERXXXXXX - For debug purpose.
  Change - qla2xxx: Add error counters to debugfs node.

  - 10.02.00.02.a2-k1 AE 07/10/2020
  - ERXXXXXX - qla2xxx: Fix TCM compilation issues.
  Change - Enabled build of tcm_qla2xxx module and fixed compile issues.

  - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down.
  Change - Added wait during app stop.

  - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events.
  Change - Driver changes to skip SLER for Async event command.

  - ER147323 - qla2xxx: Correct the check for sscanf return value.
  Change - Driver updated to check version correctly.

  - ERXXXXXX - qla2xxx: v2: Add EDIF support.
  Change - Refactoring EDIF code for modularity.

  - ER147298 - Congestion Warning/Alarm counters fail to increment
  Change - Update driver to increment the counters for congestion signals.

  - 10.02.00.02.a1-k1 AE 06/29/2020
  - qla2xxx: Enable IOCB throttling by default.
  - qla2xxx: Implementation to get and manage host, target stats and initiator port.
  - qla2xxx: Add SLER and PI control support.
  - qla2xxx: Do not log message when reading port speed via sysfs
  - qla2xxx: fix null pointer access.
  - qla2xxx: Use MPI hang trigger to do PEGTUNE halt.
  - qla2xxx: Reduce erroneous error in link reset path
  - qla2xxx: v2: fix stalled N2N reconnect.
  - qla2xxx: Fix warnings on SLES12SP5.
  - qla2xxx: Fix compilation issues on SLES15
  - qla2xxx: Compilation Fixes for SLES15SP1.
  - qla2xxx: Debugfs compilation issue fix for RH7.6.
  - qla2xxx: Fix gcc test compile error output being printed.
  - qla2xxx: Timestamp device online and offline transitions.
  - qla2xxx: Add rport fields in debugfs.
  - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices.
  - qla2xxx: Setup debugfs entries for remote ports.
  - qla2xxx: Fix edif related compilation issue on RH7.6.
  - Fixes for compilation on hpe branch
  - qla2xxx: Compilation fixes for RH8.2
  - qla2xxx: Compilation changes for RH7.6
  - qla2xxx: Fixes for compilation on RH7.x I
  - qla2xxx: bsg_job to bsg_job_t
  - qla2xxx: I Unify source code to work with newer kernels.
  - qla2xxx: Makefile changes from code-uni-devel-10x.
  - qla2xxx: qla_edif file changes to compile the driver.
  - qla2xxx: Fix compilation issues.
  - qla2xxx: Fix Makefile issue.
  - qla2xxx: fix compile error
  - qla2xxx: Use explicit LOGO in target mode
  - qla2xxx: Add EDIF support.
  - qla2xxx: Addd edif related files.
  - qla2xxx: Fix MPI failure AEN (8200) handling.
  - qla2xxx: SCM - Backport optimizations and style changes from upstream work.
  - qla2xxx: Fix warning in qla_attr.c file.
  - qla2xxx: Fix nvme compilation error.
  - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt
  - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking.
  - qla2xxx: Fix WARN_ON in qla_nvme_register_hba.
  - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime.
  - qla2xxx: Make tgt_port_database available in initiator mode.
  - qla2xxx: reduce noisy debug message.
  - qla2xxx: Fix mailbox Ch erroneous error
  - qla2xxx: fix login timeout.
  - qla2xxx: Accomodate for SCM FW attribute bit change.
  - qla2xxx: post FC event (FPIN) to transport FPIN handler.
  - qla2xxx: Hide fc_host_fpin_rcv kernel dependency.
  - qla2xxx: Add changes to compile across various kernels.
  - qla2xxx: Use active targets to update SCM stats.
  - qla2xxx: Move SCM functions to qla_isr to keep changes local.
  - qla2xxx: Code to process FLOGI ACC extended payload.
  - qedf: Fix compilation issue - revisit.
  - qla2xxx: SCM Phase 1 Implementation + 2 other patches.
  - qla2xxx: Enable PUREX passthru post ISP reset.
  - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV.
  - qla2xxx: performance tweak
  - scsi: qla2xxx: fix fcport null pointer access.
  - fixup! qla2xxx: Fix unbound NVME response length.
  - scsi: qla2xxx: Fix unbound NVME response length
  - qla2xxx: Add host attribute to trigger MPI hang.
  - qla2xxx: ONEOFF: silent dbg messages for good path io.
  - qla2xxx: ONEOFF: fix pDIF detection
  - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF.
  - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF
  - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI
  - qla2xxx: HPE 3PAR private T10-PI support.
  - qla2xxx: Check for fabric_priority flag during login
  - qla2xxx: use iocb_fabric_priority flag
  - qla2xxx: Fix QoS name and add debug logs
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: HPE: Register FDMI QOS
  - qla2xxx: Add bsg interface for qos lun level bitmask.
  - qla2xxx: Read E2E QoS fcport priority bitmasks from flash.
  - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field.
  - qla2xxx: Add fabric priority qos lun iocb mechanism.
  - qla2xxx: Implement CT command GFO (Get Fabric Object).
  - qla2xxx: Add support for fabric priority per target.
  - qla2xxx: fix mtcp dump collection failure.
  - qla2xxx: Set Nport ID for N2N
  - qla2xxx: Fix crash during device discovery.
  - qla2xxx: Handle NVME status iocb correctly.
  - qla2xxx: Remove restriction of FC T10-PI and NVME
  - qla2xxx: serialize fc_port alloc in N2N
  - qla2xxx: NPIV does not come up after FW dump.
  - qla2xxx: fix RDP respond data format bug.
  - qla2xxx: force semaphore on flash validation failure.
  - qla2xxx: add more FW debug information
  - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe
  - qla2xxx: Update BPM enablement semantics.
  - qla2xxx: fix FW resource print error.
  - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs.
  - qla2xxx: Ensure flash updates return possible failure status through bsg interface.
  - qla2xxx: Improved secure flash support messages
  - qla2xxx: fix flag passing error
  - qla2xxx: Use FC generic update firmware options routine for ISP27xx.
  - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options.
  - qla2xxX: Add 16.0GT for PCI String
  - qla2xxx: Use FW_STARTED macro
  - qla2xxx: Add fixes for mailbox command
  - qla2xxx: Fix login IOCB flag
  - qla2xxx: Save rscn_gen for new fcport
  - qla2xxx: firmware option 3 is clobbered by speed set
  - qla2xxx: ISP28xx active FW region
  - qla2xxx: Add portname to print logs in qla24xx_logio_entry().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add Speed in SFP print information
  - qla2xxx: Fix RDP response size
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Add vendor extended FDMI additions and amendments.
  - qla2xxx: Provide separate RDP enable.
  - qla2xxx: Add vendor extended RDP additions and amendments.
  - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP.
  - qla2xxx: Add 2061 PCI ID
  - qla2xxx: Remove all DIX-0 references
  - qla2xxx: Add endianizer macro calls to fc host stats.
  - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data.
  - qla2xxx: Move free of fcport out of interrupt context.
  - qla2xxx: Add beacon LED config sysfs interface.
  - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect

  - 10.01.00.22-k AE 06/29/2020
  - Upstream driver as part of Linux 5.6


author: Prashant Sreedharan <prashant.sreedharan@broadcom.com> 3.137h
changelog:
  - tg3_disable_ints using uninitialized mailbox value to disable interrupts (Severity:Minor)
  - Enhancement for recoverable/unrecoverable errors (Severity:Minor)
  - Add support for RHEL 6.6 (Severity:Minor)
  - Readme file does not indicate tg3.spec location (Severity:Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137j
changelog:
  - Add support for SLES11SP4 (Severity:Minor)
  - Add support for Debian 7.7 (Severity:Minor)
  - Fixed delay in getting OperationalStatus of the nic on system reboot (Severity:Minor)


author: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> 3.137k
changelog:
  - Add support for linux 3.16.0 kernel (Severity:Minor)
  - Add support for RHEL 4.8 (Severity:Minor)
  - KVM PCI passthrough failed for tg3 on SUSE 11.3 (Severity:Minor)
  - Add support for RHEL 5.11 (Severity:Minor)
  - (SLES11SP4) After installation of tg3 driver, interface(s) don't come up (Severity:Minor)


author: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> 3.137o
changelog:
  - Add work around HW/FW limitations with vlan encapsulated frames (Severity:Minor)
  - Fix for transmit queue 0 timed out when too many gso_segs (Severity:Medium)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137v
changelog:
  - Backport upstream patches  (Severity:Medium)
  - Add PHY reset workaround in change MTU path for 5717/19/20  (Severity:Medium)
  - Update the copyright (Severity:Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137w
changelog:
  - Add SLES 15 support  (Severity:Medium)
  - Add RHEL 7.5 support (Severity:Medium)
  - Fix RHEL 6.4 compilation (Severity:Medium)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137x
changelog:
  - Add Ubuntu 18.04 support  (Severity:Minor)
  - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor)
  - Avoid usleep_range() with holding spin lock (Severity:Minor)


