TBD

]]>
  • This product enhances the tg3 driver to support register read and write operations through private ioctl commands on Linux.
    • ]]>
  • This product fixes the issue where a kernel BUG_ON may occur during tg3 driver resource cleanup.
  • This product fixes the issue where a scheduling-while-atomic warning may occur in the tg3 driver.
    • ]]>         This is the initial release for Venice processor.

    ]]>         TBD

    ]]>
  • This product enhancement to adds RDE support for SRIOVEnabled and VirtualFunctionAllocation
    • ]]>
  • This product fixes the issue where wrong port speed in MCTP VDM Get PCIe Adapter Attributes response
  • This product fixes the issue where  NC-SI over MCTP fails after BMC sends concurrent commands
  • This product fixes the issue where wrong temperature thresholds are reported for QSFP28 transceiver LTA8531
  • This product fixes the issue where PLDM Firmware Update error handling
  • This product fixes the issue where NC-SI Clear Initial State command can result in buffers being freed incorrectly.
  • This product fixes the issue where the power level setting for QSFP, QSFP+, and QSFP28 optical modules.
  • This product fixes the issue where NC-SI OEM Get Media Info command (0x12) returning incorrect MaxMediaSpeed
  • This product fixes the issue where link flap during BMC initiated host power cycle
    • ]]>         Initial version

    ]]>         This product fixed an issue where NIC link up/down events were registered twice per port.

    ]]>         This product fixed an issue where NIC link up/down events were registered twice per port.

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial version of the firmware.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances the tg3 driver to support register read and write operations through private ioctl commands on Linux.
    • ]]>
  • This product fixes the issue where a kernel BUG_ON may occur during tg3 driver resource cleanup.
  • This product fixes the issue where a scheduling-while-atomic warning may occur in the tg3 driver
    • ]]>
  • Add dual-signing support.
    • ]]>
  • Regular FW maintenance release for sanitize, DRAM,DMA transfer and log page fix.
    • ]]>         This product enhancement includes improvements to firmware compatibility.

    ]]>         This product enhancement includes improvements to firmware compatibility.

    ]]>         TBD

    ]]>         Initial version.

    ]]>
  • Aero PR12 GCA
    • ]]>
  • Improved handling of dma_alignment and the NVMe boundary mask for better
    compatibility across kernel versions
    • ]]>
  • Fix an issue that NVMe device properties function lacks NULL checks before using request_queue->limits
  • Fix IOMMU exceptions for some commands. The affected commands are
    • REPORT ZONES (opcode 0x95, service action 0x00)
    • GET PHYSICAL ELEMENT STATUS (opcode 0x9E, service action 0x17)
    • SECURITY PROTOCOL IN (opcode 0xA2)
  • Fixed an issue where zero-length ATA VPD inquiry commands were not handled
    correctly and failed with a non-standard status code (0xF0)
  • Fix SCSI host template callback for kernel 6.12
    • ]]>
  • Aero PR12 GCA
    • ]]>
  • Improved handling of dma_alignment and the NVMe boundary mask for better
    compatibility across kernel versions
    • ]]>
  • Fix an issue that NVMe device properties function lacks NULL checks before using request_queue->limits
  • Fix IOMMU exceptions for some commands. The affected commands are
    • REPORT ZONES (opcode 0x95, service action 0x00)
    • GET PHYSICAL ELEMENT STATUS (opcode 0x9E, service action 0x17)
    • SECURITY PROTOCOL IN (opcode 0xA2)
  • Fixed an issue where zero-length ATA VPD inquiry commands were not handled
    correctly and failed with a non-standard status code (0xF0)
  • Fix SCSI host template callback for kernel 6.12
    • ]]>
  • Updated supported products
  • Updated setup utility dependencies
    • ]]>
  • Updated supported products
  • Updated setup utility dependencies
    • ]]>         TBD

    ]]>
  • This product fixes the issue where BMC ping may fail after host network interfaces are added, removed, or reconfigured.
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         TBD

    ]]>         New release initial version

    ]]>
  • Aero PR12 GCA
    • ]]>
  • Return error when enabling encryption with 256 characters for keyid in Drive Security
    command
  • Display the controller serial number as "NA" when not programmed
    • ]]>
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on NVMe drives
  • Fix an issue that PSOC update is not allowing when the part number is beyond 65535
    • ]]>         TBD

    ]]>
  • This product fixes the issue where  the PXE boot failure due to missing link flap on warm reboot
  • This product fixes the issue where the Firmware timeout errors seen when reloading driver.
  • This product fixes the issue where brcm-niccli show ""Link Down"" even though link is up
  • This product fixes the issue where NC-SI over MCTP fails after BMC sends concurrent commands.
  • This product fixes the issue where Linux: Link down reason is not populated in Linux dmesg.
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>         TBD

    ]]>
  • This product fixes the issue where potential memory leaks may be reported when kernel memory checking is enabled.
  • This product fixes the issue where a kernel crash may occur during driver removal after creating a large number of ntuple filters.
  • This product fixes the issue where a kernel crash may occur when bringing up a VF interface with PCIe TPH disabled.
  • This product fixes the issue where a driver initialization warning or failure may occur due to duplicate kernel memory cache creation on newer Linux kernels.
    • ]]>
  • Aero PR12 Final Production
    • ]]>
  • Add additional escape sequences for special characters when encoding BEJString to comply with the DMTF specification. iLO 7 1.20, iLO6 1.74 and iLO5 3.18 are required to support this change.
  • DMTF PLDM Redfish Device Enablement enhancements
    • Add support for Redfish Conditions (GET)
      • Each resource contains a conditions table that lists the appropriate
        MessageId and MessageSeverity. Redfish messages impact the Redfish
        resource Status object. Any outstanding message will appear in the
        Redfish Status[Conditions] array. The highest Status[Conditions][Severity]
        sets the overall Status[Health] of the resource. When the
        Status[Conditions] array is empty the Status[Health] shall be OK.
      • Port Conditions do not display any condition other than OK
      • In scenarios where ControllerPreviousError condition happens, the same
        is listed under StorageController.Status. Usually after iLO acknowledges
        ControllerPreviousError event, FW clears the condition from the
        StorageController.Status.Conditions[] list.
    • Redfish Metrics GET Support for DriveMetrics, EnvironmentMetrics and
      VolumeMetrics
      • DriveMetrics: BadBlockCount, ReadIOKiBytes, WriteIOKiBytes,
        PowerOnHours, NVMeSMART (MVMeSMART attributes are supported
        for NVMe drive only)
      • EnvironmentMetrics for Drive Resource: TemperatureCelsius.Reading
      • VolumeMetrics: ConsistencyCheckCount, ConsistencyCheckErrorCount,
        RebuildErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches
        the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or
        Redfish ResetToDefaults.ResetAll.
  • Add support for Redfish Parallel Resource PDR. The feature reduce iLO resource
    required to support controller related Metrics.
  • Add support for UBM11 backplane
  • Enhanced the UBM backplane firmware update process to eliminate the risk of firmware
    corruption when transferred data becomes corrupted
  • Refine the message on HII prereview configuration for the foreign import
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase
  • Return error when enabling encryption with 256 characters in the
    "EncryptionKeyIdentifier" property through Redfish
    • ]]>
  • Fix an issue that Backup Exec doesn’t work with LTO drives in Linux systems
  • Fix a rare issue that controller VM fails to bootup after a host reboot on Linux hypervisor
  • Fix an issue that poor performance is observed during small-range writes
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on
    NVMe drives
  • Fix a rare issue that PL fault 0x4318 is observed during the IPMI power-cycle test
  • Fix a rare issue that cache restore failure observed after firmware update followed by a
    server UMCE (unrecoverable machine check error)
  • Fix an issue that firmware may assert when NVME drives take long time for Task
    Management
  • Fix a rare issue that PL fault 0x6054 observed during patrol read in progress
  • Fix a rare issue that firmware may assert during firmware update with IOs and task
    managements on JBOD drives.
  • Fix an issue that foreign drive is shown in HotspareType@Redfish.AllowableValues
  • Fix an issue that SATA LFF drives list the "DriveFormFactor" as "2_5" under the Storage
    tab and in Redfish
  • Fix an issue that Server health shows Warning when a degraded volume is present
  • Fix a rare issue that GET operation on Redfish Drive URI occasionally return 404 Not Found
  • Fix an issue that rebuild does not start on an SED drive when inserted in the missing slot of a R1 drive
  • Fix an issue that NVME drive undergoing sanitize is not detected after server reboot
  • Fix a rare issue that Redfish Chassis properties are not properly displayed for UBM10
    backplane
  • Fix an issue that PCIConfiglink page events may come continuously in snapdump log
  • Fix a rare issue that firmware may assert when user starts crypto erase and removed the
    drive
  • Fix an issue that the sanitize percentage does not progress when monitoring drive's
    sanitize state
  • Fix a rare issue that PLDM Fault 0x5: Command abort failed observed when doing
    backplane firmware update
  • Fix a rare firmware crash that may occur during concurrent Virtual Machine clone
    operations and JBOD creation
  • Fix an issue that firmware may assert if drive goes through shield recovery and is
    subsequently removed
  • Fix a rare issue that firmware may assert while running IO's and Task Management
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>         Changes included in version 22.49.1014(A):

    • Product rebuilt with dual signing key (RSA + ML-DSA).

    No new features or changes are included in version 22.49.1014.

    ]]>         The following issues have been fixed in version 22.49.1014:

    • vDPA doorbell resources were not released causing failures when running other functionality after a vDPA FLR. Doorbell resources are now properly unlocked.
    • Live migration target would not receive a port state change event on the resume VHCA command. The target now generates this event so software that depends on port state is notified of any changes.
    • PCC issue where RDMA traffic would stall at large scale for certain IP and UDP source-port combinations when a PCC user algorithm was active and no CC algorithm was configured in slot 0.
    ]]>         No new features or changes are included in version 22.49.1014.

    ]]>         The following issues have been fixed in version 22.49.1014:

    • vDPA doorbell resources were not released causing failures when running other functionality after a vDPA FLR. Doorbell resources are now properly unlocked.
    • Live migration target would not receive a port state change event on the resume VHCA command. The target now generates this event so software that depends on port state is notified of any changes.
    • PCC issue where RDMA traffic would stall at large scale for certain IP and UDP source-port combinations when a PCC user algorithm was active and no CC algorithm was configured in slot 0.
    ]]>         Initial version.

    ]]>         The following new features and changes have been included in version 26.04:

    • RSS for IPSec offload – Enables L4-based RSS for decrypted traffic by leveraging new firmware capability to identify the inner protocol post-decryption, then creating additional flow groups and steering rules to classify and redirect packets so traffic is distributed across CPU cores.
    • Export DMABUF FD for mlx5 device memory (i.e. DM) and UAR – Added support for exporting dma-buf file descriptors for mlx5 UAR and DM objects. This enables mlx5 to export the PCI memory backing these objects while avoiding potential dangling-address issues in cases of ungraceful memory release (e.g., NIC failures, driver unbind, etc.).
    • Cross-Process TLP Emulation Region Sharing - Added support for Transaction Layer Packet (TLP) emulation response gateway regions, enabling userspace device-emulation software to write TLP responses directly to lower layers without kernel driver involvement. Also added support for sharing TLP emulation regions across multiple emulation processes.
    • DOCA Perftest – DOCA Perftest was added to DOCA-Networking host profile.
    • CUDA – updated CUDA version to 13.2.
    ]]>         The following issues have been fixed in version 26.04:

    • A BlueField-3 host SF could remain stuck in the inactive+attached state and fail to reactivate after host restart flows.
    • A NULL pointer dereference in the mlx5_core driver that could cause a kernel panic and report PCIe completion-timeout errors on ConnectX-8 bare-metal systems.
    • An issue that occurred when CONFIG_UBSAN=y and the user provided an invalid value, resulting in the following UBSAN error:UBSAN: shift-out-of-bounds in drivers/net/ethernet/mellanox/mlx5/core/diag/diag_cnt.c:190:11 shift exponent 4294967293 is too large for 32-bit type 'int'
    • A race condition in the ib_core kernel module during concurrent address resolution that could produce a zero destination MAC (DMAC), causing silent packet loss and RDMA retry-exceeded errors.
    • Upgrading doca-ofed did not always upgrade doca-extra (which includes the module sources and doca-kernel-support build scripts). In some cases, this caused doca-kernel-support to build against sources from an older release.
    • Accessing timestamping mode could fail on kernel 7.0 and later.
    ]]>         This is the initial release for iLO8 ASR driver.

    ]]>         TBD

    ]]>
  • This product fixes the issue where potential memory leaks may be reported when kernel memory checking is enabled.
  • This product fixes the issue where a kernel crash may occur during driver removal after creating a large number of ntuple filters.
  • This product fixes the issue where a kernel crash may occur when bringing up a VF interface with PCIe TPH disabled.
  • This product fixes the issue where a driver initialization warning or failure may occur due to duplicate kernel memory cache creation on newer Linux kernels.
    • ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>
  • This product added Secure Boot support using the Microsoft Option ROM UEFI CA 2023 certificate.
  • This product added UEFI firmware management support for E610 adapters.
    • ]]>
  • This product fixed unexpected management interface resets during UEFI preboot initialization.
  • This product fixed default MAC address restore behavior for supported E610 adapters.
  • This product fixed an unexpected sensor entry that could appear in the PLDM sensor list.
  • This product fixed RDE link state reporting so host operating system tools reflect the correct link state after changing the port link state.
  • This product fixed RDE MAC address reporting so MAC address changes are reflected immediately after update operations.
    • ]]>
  • This product enhanced compatibility with HPE iLO to ensure the device’s physical location is accurately reported.
  • This product enhanced compatibility with HPE iLO for Redfish functionality.
    • ]]>
  • This product fixed the LED behavior during AC power‑on so the indicator correctly reflects the device status before the system boots.
  • This product fixed an issue where IP assignment failed when iLO Sideband was enabled for the front OCP Isorno NIC.
    • ]]>         The following new features and changes have been included in version 26.04:

    • RSS for IPSec offload – Enables L4-based RSS for decrypted traffic by leveraging new firmware capability to identify the inner protocol post-decryption, then creating additional flow groups and steering rules to classify and redirect packets so traffic is distributed across CPU cores.
    • Export DMABUF FD for mlx5 device memory (i.e. DM) and UAR – Added support for exporting dma-buf file descriptors for mlx5 UAR and DM objects. This enables mlx5 to export the PCI memory backing these objects while avoiding potential dangling-address issues in cases of ungraceful memory release (e.g., NIC failures, driver unbind, etc.).
    • Cross-Process TLP Emulation Region Sharing - Added support for Transaction Layer Packet (TLP) emulation response gateway regions, enabling userspace device-emulation software to write TLP responses directly to lower layers without kernel driver involvement. Also added support for sharing TLP emulation regions across multiple emulation processes.
    • DOCA Perftest – DOCA Perftest was added to DOCA-Networking host profile.
    • CUDA – updated CUDA version to 13.2.
    ]]>         The following issues have been fixed in version 26.04:

    • A BlueField-3 host SF could remain stuck in the inactive+attached state and fail to reactivate after host restart flows.
    • A NULL pointer dereference in the mlx5_core driver that could cause a kernel panic and report PCIe completion-timeout errors on ConnectX-8 bare-metal systems.
    • An issue that occurred when CONFIG_UBSAN=y and the user provided an invalid value, resulting in the following UBSAN error:UBSAN: shift-out-of-bounds in drivers/net/ethernet/mellanox/mlx5/core/diag/diag_cnt.c:190:11 shift exponent 4294967293 is too large for 32-bit type 'int'
    • A race condition in the ib_core kernel module during concurrent address resolution that could produce a zero destination MAC (DMAC), causing silent packet loss and RDMA retry-exceeded errors.
    • Upgrading doca-ofed did not always upgrade doca-extra (which includes the module sources and doca-kernel-support build scripts). In some cases, this caused doca-kernel-support to build against sources from an older release.
    • Accessing timestamping mode could fail on kernel 7.0 and later.
    ]]>         The following new features and changes have been included in version 26.04:

    • RSS for IPSec offload – Enables L4-based RSS for decrypted traffic by leveraging new firmware capability to identify the inner protocol post-decryption, then creating additional flow groups and steering rules to classify and redirect packets so traffic is distributed across CPU cores.
    • Export DMABUF FD for mlx5 device memory (i.e. DM) and UAR – Added support for exporting dma-buf file descriptors for mlx5 UAR and DM objects. This enables mlx5 to export the PCI memory backing these objects while avoiding potential dangling-address issues in cases of ungraceful memory release (e.g., NIC failures, driver unbind, etc.).
    • Cross-Process TLP Emulation Region Sharing - Added support for Transaction Layer Packet (TLP) emulation response gateway regions, enabling userspace device-emulation software to write TLP responses directly to lower layers without kernel driver involvement. Also added support for sharing TLP emulation regions across multiple emulation processes.
    • DOCA Perftest – DOCA Perftest was added to DOCA-Networking host profile.
    • CUDA – updated CUDA version to 13.2.
    ]]>         The following issues have been fixed in version 26.04:

    • A BlueField-3 host SF could remain stuck in the inactive+attached state and fail to reactivate after host restart flows.
    • A NULL pointer dereference in the mlx5_core driver that could cause a kernel panic and report PCIe completion-timeout errors on ConnectX-8 bare-metal systems.
    • An issue that occurred when CONFIG_UBSAN=y and the user provided an invalid value, resulting in the following UBSAN error:UBSAN: shift-out-of-bounds in drivers/net/ethernet/mellanox/mlx5/core/diag/diag_cnt.c:190:11 shift exponent 4294967293 is too large for 32-bit type 'int'
    • A race condition in the ib_core kernel module during concurrent address resolution that could produce a zero destination MAC (DMAC), causing silent packet loss and RDMA retry-exceeded errors.
    • Upgrading doca-ofed did not always upgrade doca-extra (which includes the module sources and doca-kernel-support build scripts). In some cases, this caused doca-kernel-support to build against sources from an older release.
    • Accessing timestamping mode could fail on kernel 7.0 and later.
    ]]>
  • Aero PR12 GCA
    • ]]>
  • Support MR200, MR400 and MR900 controllers
  • Enhance the MRSA Bypass Authentication mechanism so that the configuration is
    allowed only when logged in as an administrator or root
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase 
  • Return error when enabling encryption with 256 characters for Security Key Identifier in
    Drive Security setting
    • ]]>
  • Fix a00155532en_us Advisory: HPE MR Storage Administrator (MRSA) - The MRSA  Application Fails To Launch In SUSE Linux Enterprise Server (SLES) 16 After A Server Reboot
  • Fix an issue that MRSA return " Error Code 5002 Invalid URI Parameter" when selecting Continuously in Schedule Consistency Check setting
    • ]]>         Changes included in version 26.49.1014(A):

    • Product rebuilt with dual signing key (RSA + ML-DSA).

    No new features or changes are included in version 26.49.1014.

    ]]>         The following issues have been fixed in version 26.49.1014:

    • Live migration target would not receive a port state change event on the resume VHCA command. The target now generates this event so software that depends on port state is notified of any changes.
    • PCC issue where RDMA traffic would stall at large scale for certain IP and UDP source-port combinations when a PCC user algorithm was active and no CC algorithm was configured in slot 0.
    ]]>         No new features or changes are included in version 26.49.1014.

    ]]>         The following issues have been fixed in version 26.49.1014:

    • Live migration target would not receive a port state change event on the resume VHCA command. The target now generates this event so software that depends on port state is notified of any changes.
    • PCC issue where RDMA traffic would stall at large scale for certain IP and UDP source-port combinations when a PCC user algorithm was active and no CC algorithm was configured in slot 0.
    ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
  • This product added support for newer Red Hat Enterprise Linux releases
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
  • This product added support for newer Red Hat Enterprise Linux releases
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>
  • Aero PR12 GCA
    • ]]>
  • Return error when enabling encryption with 256 characters for keyid in Drive Security
    command
  • Display the controller serial number as "NA" when not programmed
    • ]]>
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on NVMe drives
  • Fix an issue that PSOC update is not allowing when the part number is beyond 65535
    • ]]>         Initinal version

    ]]>
  • Aero PR12 GCA
    • ]]>
  • Support MR200, MR400 and MR900 controllers
  • Enhance the MRSA Bypass Authentication mechanism so that the configuration is
    allowed only when logged in as an administrator or root
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase 
  • Return error when enabling encryption with 256 characters for Security Key Identifier in
    Drive Security setting
    • ]]>
  • Fix an issue that MRSA return " Error Code 5002 Invalid URI Parameter" when selecting Continuously in Schedule Consistency Check setting
    • ]]>         TBD

    ]]>
  • Add dual-signing support.
    • ]]>
  • RSOD issue fixed. RSOD was occurred during server power-on if enable the VROC.
    • ]]>         TBD

    ]]>
  • This product added support for newer Red Hat Enterprise Linux releases.
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>
  • This product added support for newer Red Hat Enterprise Linux releases.
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux
  • This product added support for newer Red Hat Enterprise Linux releases.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux
  • This product added support for newer Red Hat Enterprise Linux releases.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>         TBD

    ]]>
  • This product fixes the issue where  the PXE boot failure due to missing link flap on warm reboot
  • This product fixes the issue where the Firmware timeout errors seen when reloading driver.
  • This product fixes the issue where brcm-niccli show ""Link Down"" even though link is up
  • This product fixes the issue where NC-SI over MCTP fails after BMC sends concurrent commands.
  • This product fixes the issue where Linux: Link down reason is not populated in Linux dmesg.
    • ]]>         TBD

    ]]>
  • This product enhances support for systems with more than 256 logical processors on Windows OS.
    • ]]>         TBD

    ]]>
  • This product fixes the issue where network connectivity may be intermittently lost when PTP hardware timestamping is enabled on certain NXE family devices.
  • This product fixes the issue where a BSOD may occur while sending QUIC/UDP traffic on Windows Server.
    • ]]>         Initinal version

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>
  • Aero PR12 Final Production
    • ]]>
  • Add additional escape sequences for special characters when encoding BEJString to comply with the DMTF specification. iLO 7 1.20, iLO6 1.74 and iLO5 3.18 are required to support this change.
  • DMTF PLDM Redfish Device Enablement enhancements
    • Add support for Redfish Conditions (GET)
      • Each resource contains a conditions table that lists the appropriate
        MessageId and MessageSeverity. Redfish messages impact the Redfish
        resource Status object. Any outstanding message will appear in the
        Redfish Status[Conditions] array. The highest Status[Conditions][Severity]
        sets the overall Status[Health] of the resource. When the
        Status[Conditions] array is empty the Status[Health] shall be OK.
      • Port Conditions do not display any condition other than OK
      • In scenarios where ControllerPreviousError condition happens, the same
        is listed under StorageController.Status. Usually after iLO acknowledges
        ControllerPreviousError event, FW clears the condition from the
        StorageController.Status.Conditions[] list.
    • Redfish Metrics GET Support for DriveMetrics, EnvironmentMetrics and
      VolumeMetrics
      • DriveMetrics: BadBlockCount, ReadIOKiBytes, WriteIOKiBytes,
        PowerOnHours, NVMeSMART (MVMeSMART attributes are supported
        for NVMe drive only)
      • EnvironmentMetrics for Drive Resource: TemperatureCelsius.Reading
      • VolumeMetrics: ConsistencyCheckCount, ConsistencyCheckErrorCount,
        RebuildErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches
        the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or
        Redfish ResetToDefaults.ResetAll.
  • Add support for Redfish Parallel Resource PDR. The feature reduce iLO resource
    required to support controller related Metrics.
  • Add support for UBM11 backplane
  • Enhanced the UBM backplane firmware update process to eliminate the risk of firmware
    corruption when transferred data becomes corrupted
  • Refine the message on HII prereview configuration for the foreign import
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase
  • Return error when enabling encryption with 256 characters in the
    "EncryptionKeyIdentifier" property through Redfish
    • ]]>
  • Fix an issue that Backup Exec doesn’t work with LTO drives in Linux systems
  • Fix a rare issue that controller VM fails to bootup after a host reboot on Linux hypervisor
  • Fix an issue that poor performance is observed during small-range writes
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on
    NVMe drives
  • Fix a rare issue that PL fault 0x4318 is observed during the IPMI power-cycle test
  • Fix a rare issue that cache restore failure observed after firmware update followed by a
    server UMCE (unrecoverable machine check error)
  • Fix an issue that firmware may assert when NVME drives take long time for Task
    Management
  • Fix a rare issue that PL fault 0x6054 observed during patrol read in progress
  • Fix a rare issue that firmware may assert during firmware update with IOs and task
    managements on JBOD drives.
  • Fix an issue that foreign drive is shown in HotspareType@Redfish.AllowableValues
  • Fix an issue that SATA LFF drives list the "DriveFormFactor" as "2_5" under the Storage
    tab and in Redfish
  • Fix an issue that Server health shows Warning when a degraded volume is present
  • Fix a rare issue that GET operation on Redfish Drive URI occasionally return 404 Not Found
  • Fix an issue that rebuild does not start on an SED drive when inserted in the missing slot of a R1 drive
  • Fix an issue that NVME drive undergoing sanitize is not detected after server reboot
  • Fix a rare issue that Redfish Chassis properties are not properly displayed for UBM10
    backplane
  • Fix an issue that PCIConfiglink page events may come continuously in snapdump log
  • Fix a rare issue that firmware may assert when user starts crypto erase and removed the
    drive
  • Fix an issue that the sanitize percentage does not progress when monitoring drive's
    sanitize state
  • Fix a rare issue that PLDM Fault 0x5: Command abort failed observed when doing
    backplane firmware update
  • Fix a rare firmware crash that may occur during concurrent Virtual Machine clone
    operations and JBOD creation
  • Fix an issue that firmware may assert if drive goes through shield recovery and is
    subsequently removed
  • Fix a rare issue that firmware may assert while running IO's and Task Management
    • ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>         Instead of using sed command, using awk command to fetch the right column name

    ]]>         TBD

    ]]>
  • This product fixes the issue where  the PXE boot failure due to missing link flap on warm reboot
  • This product fixes the issue where the Firmware timeout errors seen when reloading driver.
  • This product fixes the issue where brcm-niccli show ""Link Down"" even though link is up
  • This product fixes the issue where NC-SI over MCTP fails after BMC sends concurrent commands.
  • This product fixes the issue where Linux: Link down reason is not populated in Linux dmesg.
    • ]]>         This is initial release for iLO8 Channel Interface Driver.

    ]]>
  • This product added support for newer Red Hat Enterprise Linux releases.
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>
  • This product added support for newer Red Hat Enterprise Linux releases.
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>         TBD

    ]]>
  • This product fixes the issue where BMC ping may fail after host network interfaces are added, removed, or reconfigured.
    • ]]>
  • Aero PR12 GCA
    • ]]>
  • Improved handling of dma_alignment and the NVMe boundary mask for better
    compatibility across kernel versions
    • ]]>
  • Fix an issue that NVMe device properties function lacks NULL checks before using request_queue->limits
  • Fix IOMMU exceptions for some commands. The affected commands are
    • REPORT ZONES (opcode 0x95, service action 0x00)
    • GET PHYSICAL ELEMENT STATUS (opcode 0x9E, service action 0x17)
    • SECURITY PROTOCOL IN (opcode 0xA2)
  • Fixed an issue where zero-length ATA VPD inquiry commands were not handled
    correctly and failed with a non-standard status code (0xF0)
  • Fix SCSI host template callback for kernel 6.12
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release

    ]]>         TBD

    ]]>
  • This product fixes the issue where potential memory leaks may be reported when kernel memory checking is enabled.
  • This product fixes the issue where a kernel crash may occur during driver removal after creating a large number of ntuple filters.
  • This product fixes the issue where a kernel crash may occur when bringing up a VF interface with PCIe TPH disabled.
  • This product fixes the issue where a driver initialization warning or failure may occur due to duplicate kernel memory cache creation on newer Linux kernels.
    • ]]>         TBD

    ]]>
  • This product fixes the issue where  the PXE boot failure due to missing link flap on warm reboot
  • This product fixes the issue where the Firmware timeout errors seen when reloading driver.
  • This product fixes the issue where brcm-niccli show ""Link Down"" even though link is up
  • This product fixes the issue where NC-SI over MCTP fails after BMC sends concurrent commands.
  • This product fixes the issue where Linux: Link down reason is not populated in Linux dmesg.
    • ]]>         TBD

    ]]>
  • This product fixes the issue where  the PXE boot failure due to missing link flap on warm reboot
  • This product fixes the issue where the Firmware timeout errors seen when reloading driver.
  • This product fixes the issue where brcm-niccli show ""Link Down"" even though link is up
  • This product fixes the issue where NC-SI over MCTP fails after BMC sends concurrent commands.
  • This product fixes the issue where Linux: Link down reason is not populated in Linux dmesg.
    • ]]>
  • 7.38 (Aero PR12 GCA)
    • ]]>
  • Return error when enabling encryption with 256 characters for keyid in Drive Security
    command
  • Display the controller serial number as "NA" when not programmed
    • ]]>
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on NVMe drives
  • Fix an issue that PSOC update is not allowing when the part number is beyond 65535
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         TBD

    ]]>
  • This product enhancement to adds RDE support for SRIOVEnabled and VirtualFunctionAllocation
    • ]]>
  • This product fixes the issue where wrong port speed in MCTP VDM Get PCIe Adapter Attributes response
  • This product fixes the issue where  NC-SI over MCTP fails after BMC sends concurrent commands
  • This product fixes the issue where wrong temperature thresholds are reported for QSFP28 transceiver LTA8531
  • This product fixes the issue where PLDM Firmware Update error handling
  • This product fixes the issue where NC-SI Clear Initial State command can result in buffers being freed incorrectly.
  • This product fixes the issue where the power level setting for QSFP, QSFP+, and QSFP28 optical modules.
  • This product fixes the issue where NC-SI OEM Get Media Info command (0x12) returning incorrect MaxMediaSpeed
  • This product fixes the issue where link flap during BMC initiated host power cycle
    • ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
  • This product added support for newer Red Hat Enterprise Linux releases
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
  • This product added support for newer Red Hat Enterprise Linux releases
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>
  • Aero PR12 Final Production
    • ]]>
  • Add additional escape sequences for special characters when encoding BEJString to comply with the DMTF specification. iLO 7 1.20, iLO6 1.74 and iLO5 3.18 are required to support this change.
  • DMTF PLDM Redfish Device Enablement enhancements
    • Add support for Redfish Conditions (GET)
      • Each resource contains a conditions table that lists the appropriate
        MessageId and MessageSeverity. Redfish messages impact the Redfish
        resource Status object. Any outstanding message will appear in the
        Redfish Status[Conditions] array. The highest Status[Conditions][Severity]
        sets the overall Status[Health] of the resource. When the
        Status[Conditions] array is empty the Status[Health] shall be OK.
      • Port Conditions do not display any condition other than OK
      • In scenarios where ControllerPreviousError condition happens, the same
        is listed under StorageController.Status. Usually after iLO acknowledges
        ControllerPreviousError event, FW clears the condition from the
        StorageController.Status.Conditions[] list.
    • Redfish Metrics GET Support for DriveMetrics, EnvironmentMetrics and
      VolumeMetrics
      • DriveMetrics: BadBlockCount, ReadIOKiBytes, WriteIOKiBytes,
        PowerOnHours, NVMeSMART (MVMeSMART attributes are supported
        for NVMe drive only)
      • EnvironmentMetrics for Drive Resource: TemperatureCelsius.Reading
      • VolumeMetrics: ConsistencyCheckCount, ConsistencyCheckErrorCount,
        RebuildErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches
        the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or
        Redfish ResetToDefaults.ResetAll.
  • Add support for Redfish Parallel Resource PDR. The feature reduce iLO resource
    required to support controller related Metrics.
  • Add support for UBM11 backplane
  • Enhanced the UBM backplane firmware update process to eliminate the risk of firmware
    corruption when transferred data becomes corrupted
  • Refine the message on HII prereview configuration for the foreign import
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase
  • Return error when enabling encryption with 256 characters in the
    "EncryptionKeyIdentifier" property through Redfish
    • ]]>
  • Fix an issue that Backup Exec doesn’t work with LTO drives in Linux systems
  • Fix a rare issue that controller VM fails to bootup after a host reboot on Linux hypervisor
  • Fix an issue that poor performance is observed during small-range writes
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on
    NVMe drives
  • Fix a rare issue that PL fault 0x4318 is observed during the IPMI power-cycle test
  • Fix a rare issue that cache restore failure observed after firmware update followed by a
    server UMCE (unrecoverable machine check error)
  • Fix an issue that firmware may assert when NVME drives take long time for Task
    Management
  • Fix a rare issue that PL fault 0x6054 observed during patrol read in progress
  • Fix a rare issue that firmware may assert during firmware update with IOs and task
    managements on JBOD drives.
  • Fix an issue that foreign drive is shown in HotspareType@Redfish.AllowableValues
  • Fix an issue that SATA LFF drives list the "DriveFormFactor" as "2_5" under the Storage
    tab and in Redfish
  • Fix an issue that Server health shows Warning when a degraded volume is present
  • Fix a rare issue that GET operation on Redfish Drive URI occasionally return 404 Not Found
  • Fix an issue that rebuild does not start on an SED drive when inserted in the missing slot of a R1 drive
  • Fix an issue that NVME drive undergoing sanitize is not detected after server reboot
  • Fix a rare issue that Redfish Chassis properties are not properly displayed for UBM10
    backplane
  • Fix an issue that PCIConfiglink page events may come continuously in snapdump log
  • Fix a rare issue that firmware may assert when user starts crypto erase and removed the
    drive
  • Fix an issue that the sanitize percentage does not progress when monitoring drive's
    sanitize state
  • Fix a rare issue that PLDM Fault 0x5: Command abort failed observed when doing
    backplane firmware update
  • Fix a rare firmware crash that may occur during concurrent Virtual Machine clone
    operations and JBOD creation
  • Fix an issue that firmware may assert if drive goes through shield recovery and is
    subsequently removed
  • Fix a rare issue that firmware may assert while running IO's and Task Management
    • ]]>         TBD

    ]]>
  • This product enhancement to adds RDE support for SRIOVEnabled and VirtualFunctionAllocation
    • ]]>
  • This product fixes the issue where wrong port speed in MCTP VDM Get PCIe Adapter Attributes response
  • This product fixes the issue where  NC-SI over MCTP fails after BMC sends concurrent commands
  • This product fixes the issue where wrong temperature thresholds are reported for QSFP28 transceiver LTA8531
  • This product fixes the issue where PLDM Firmware Update error handling
  • This product fixes the issue where NC-SI Clear Initial State command can result in buffers being freed incorrectly.
  • This product fixes the issue where the power level setting for QSFP, QSFP+, and QSFP28 optical modules.
  • This product fixes the issue where link flap during BMC initiated host power cycle
    • ]]>         Initial version.

    ]]>         Initial version.

    ]]>         TBD

    ]]>
  • This product fixes the issue where  the PXE boot failure due to missing link flap on warm reboot
  • This product fixes the issue where the Firmware timeout errors seen when reloading driver.
  • This product fixes the issue where brcm-niccli show ""Link Down"" even though link is up
  • This product fixes the issue where NC-SI over MCTP fails after BMC sends concurrent commands.
  • This product fixes the issue where Linux: Link down reason is not populated in Linux dmesg.
    • ]]>         Initial version.

    ]]>         The following new features and changes have been included in version 26.04:

    • RSS for IPSec offload – Enables L4-based RSS for decrypted traffic by leveraging new firmware capability to identify the inner protocol post-decryption, then creating additional flow groups and steering rules to classify and redirect packets so traffic is distributed across CPU cores.
    • Export DMABUF FD for mlx5 device memory (i.e. DM) and UAR – Added support for exporting dma-buf file descriptors for mlx5 UAR and DM objects. This enables mlx5 to export the PCI memory backing these objects while avoiding potential dangling-address issues in cases of ungraceful memory release (e.g., NIC failures, driver unbind, etc.).
    • Cross-Process TLP Emulation Region Sharing - Added support for Transaction Layer Packet (TLP) emulation response gateway regions, enabling userspace device-emulation software to write TLP responses directly to lower layers without kernel driver involvement. Also added support for sharing TLP emulation regions across multiple emulation processes.
    • DOCA Perftest – DOCA Perftest was added to DOCA-Networking host profile.
    • CUDA – updated CUDA version to 13.2.
    ]]>         The following issues have been fixed in version 26.04:

    • A BlueField-3 host SF could remain stuck in the inactive+attached state and fail to reactivate after host restart flows.
    • A NULL pointer dereference in the mlx5_core driver that could cause a kernel panic and report PCIe completion-timeout errors on ConnectX-8 bare-metal systems.
    • An issue that occurred when CONFIG_UBSAN=y and the user provided an invalid value, resulting in the following UBSAN error:UBSAN: shift-out-of-bounds in drivers/net/ethernet/mellanox/mlx5/core/diag/diag_cnt.c:190:11 shift exponent 4294967293 is too large for 32-bit type 'int'
    • A race condition in the ib_core kernel module during concurrent address resolution that could produce a zero destination MAC (DMAC), causing silent packet loss and RDMA retry-exceeded errors.
    • Upgrading doca-ofed did not always upgrade doca-extra (which includes the module sources and doca-kernel-support build scripts). In some cases, this caused doca-kernel-support to build against sources from an older release.
    • Accessing timestamping mode could fail on kernel 7.0 and later.
    ]]>         Initial version.

    ]]>         Initial version.

    ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux
  • This product added support for newer Red Hat Enterprise Linux releases.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux
  • This product added support for newer Red Hat Enterprise Linux releases.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>
  • This product added support for improved operating system interrupt reporting.
  • This product enhanced receive traffic processing for better efficiency and consistency.
    • ]]>
  • This product fixed issues that could affect packet receive processing in poll mode, receive traffic interrupt handling, INF message handling, and driver cleanup during Miniport unload.
    • ]]>
  • This product added support for improved operating system interrupt reporting.
  • This product enhanced receive traffic processing for better efficiency and consistency.
    • ]]>
  • This product fixed issues that could affect packet receive processing in poll mode, receive traffic interrupt handling, INF message handling, and driver cleanup during Miniport unload.
    • ]]>         TBD

    ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed Linux driver issues related to hardware timestamp reporting, RDMA version reporting, ARM platform compilation, and DCB configuration for multi-port adapters.
  • This product fixed RDMA enablement for 8-port Ethernet configurations.
    • ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>
  • This product enhanced Linux virtual function driver compatibility and production readiness for supported enterprise Linux distributions.
    • ]]>
  • This product fixed virtual function link reporting and recovery behavior when the physical function is unavailable or reset.
    • ]]>         TBD

    ]]>
  • This product fixes the issue where ibv_info may display incorrect random values when querying RoCE device information
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         development

    ]]>         TBD

    ]]>
  • This product enhancement to adds RDE support for SRIOVEnabled and VirtualFunctionAllocation
    • ]]>
  • This product fixes the issue where wrong port speed in MCTP VDM Get PCIe Adapter Attributes response
  • This product fixes the issue where  NC-SI over MCTP fails after BMC sends concurrent commands
  • This product fixes the issue where wrong temperature thresholds are reported for QSFP28 transceiver LTA8531
  • This product fixes the issue where PLDM Firmware Update error handling
  • This product fixes the issue where NC-SI Clear Initial State command can result in buffers being freed incorrectly.
  • This product fixes the issue where the power level setting for QSFP, QSFP+, and QSFP28 optical modules.
  • This product fixes the issue where link flap during BMC initiated host power cycle
    • ]]>         To Do

    ]]>         To Do

    ]]>         TBD

    ]]>         Initial Version

    ]]>
  • Aero PR12 Final Production
    • ]]>
  • Add additional escape sequences for special characters when encoding BEJString to comply with the DMTF specification. iLO 7 1.20, iLO6 1.74 and iLO5 3.18 are required to support this change.
  • DMTF PLDM Redfish Device Enablement enhancements
    • Add support for Redfish Conditions (GET)
      • Each resource contains a conditions table that lists the appropriate
        MessageId and MessageSeverity. Redfish messages impact the Redfish
        resource Status object. Any outstanding message will appear in the
        Redfish Status[Conditions] array. The highest Status[Conditions][Severity]
        sets the overall Status[Health] of the resource. When the
        Status[Conditions] array is empty the Status[Health] shall be OK.
      • Port Conditions do not display any condition other than OK
      • In scenarios where ControllerPreviousError condition happens, the same
        is listed under StorageController.Status. Usually after iLO acknowledges
        ControllerPreviousError event, FW clears the condition from the
        StorageController.Status.Conditions[] list.
    • Redfish Metrics GET Support for DriveMetrics, EnvironmentMetrics and
      VolumeMetrics
      • DriveMetrics: BadBlockCount, ReadIOKiBytes, WriteIOKiBytes,
        PowerOnHours, NVMeSMART (MVMeSMART attributes are supported
        for NVMe drive only)
      • EnvironmentMetrics for Drive Resource: TemperatureCelsius.Reading
      • VolumeMetrics: ConsistencyCheckCount, ConsistencyCheckErrorCount,
        RebuildErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches
        the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or
        Redfish ResetToDefaults.ResetAll.
  • Add support for Redfish Parallel Resource PDR. The feature reduce iLO resource
    required to support controller related Metrics.
  • Add support for UBM11 backplane
  • Enhanced the UBM backplane firmware update process to eliminate the risk of firmware
    corruption when transferred data becomes corrupted
  • Refine the message on HII prereview configuration for the foreign import
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase
  • Return error when enabling encryption with 256 characters in the
    "EncryptionKeyIdentifier" property through Redfish
    • ]]>
  • Fix an issue that Backup Exec doesn’t work with LTO drives in Linux systems
  • Fix a rare issue that controller VM fails to bootup after a host reboot on Linux hypervisor
  • Fix an issue that poor performance is observed during small-range writes
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on
    NVMe drives
  • Fix a rare issue that PL fault 0x4318 is observed during the IPMI power-cycle test
  • Fix a rare issue that cache restore failure observed after firmware update followed by a
    server UMCE (unrecoverable machine check error)
  • Fix an issue that firmware may assert when NVME drives take long time for Task
    Management
  • Fix a rare issue that PL fault 0x6054 observed during patrol read in progress
  • Fix a rare issue that firmware may assert during firmware update with IOs and task
    managements on JBOD drives.
  • Fix an issue that foreign drive is shown in HotspareType@Redfish.AllowableValues
  • Fix an issue that SATA LFF drives list the "DriveFormFactor" as "2_5" under the Storage
    tab and in Redfish
  • Fix an issue that Server health shows Warning when a degraded volume is present
  • Fix a rare issue that GET operation on Redfish Drive URI occasionally return 404 Not Found
  • Fix an issue that rebuild does not start on an SED drive when inserted in the missing slot of a R1 drive
  • Fix an issue that NVME drive undergoing sanitize is not detected after server reboot
  • Fix a rare issue that Redfish Chassis properties are not properly displayed for UBM10
    backplane
  • Fix an issue that PCIConfiglink page events may come continuously in snapdump log
  • Fix a rare issue that firmware may assert when user starts crypto erase and removed the
    drive
  • Fix an issue that the sanitize percentage does not progress when monitoring drive's
    sanitize state
  • Fix a rare issue that PLDM Fault 0x5: Command abort failed observed when doing
    backplane firmware update
  • Fix a rare firmware crash that may occur during concurrent Virtual Machine clone
    operations and JBOD creation
  • Fix an issue that firmware may assert if drive goes through shield recovery and is
    subsequently removed
  • Fix a rare issue that firmware may assert while running IO's and Task Management
    • ]]>
  • Aero PR12 GCA
    • ]]>
  • Support MR200, MR400 and MR900 controllers
  • Enhance the MRSA Bypass Authentication mechanism so that the configuration is
    allowed only when logged in as an administrator or root
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase 
  • Return error when enabling encryption with 256 characters for Security Key Identifier in
    Drive Security setting
    • ]]>
  • Fix a00155532en_us Advisory: HPE MR Storage Administrator (MRSA) - The MRSA  Application Fails To Launch In SUSE Linux Enterprise Server (SLES) 16 After A Server Reboot
  • Fix an issue that MRSA return " Error Code 5002 Invalid URI Parameter" when selecting Continuously in Schedule Consistency Check setting
    • ]]>
  • Aero PR12 Final Production
    • ]]>
  • Add additional escape sequences for special characters when encoding BEJString to comply with the DMTF specification. iLO 7 1.20, iLO6 1.74 and iLO5 3.18 are required to support this change.
  • DMTF PLDM Redfish Device Enablement enhancements
    • Add support for Redfish Conditions (GET)
      • Each resource contains a conditions table that lists the appropriate
        MessageId and MessageSeverity. Redfish messages impact the Redfish
        resource Status object. Any outstanding message will appear in the
        Redfish Status[Conditions] array. The highest Status[Conditions][Severity]
        sets the overall Status[Health] of the resource. When the
        Status[Conditions] array is empty the Status[Health] shall be OK.
      • Port Conditions do not display any condition other than OK
      • In scenarios where ControllerPreviousError condition happens, the same
        is listed under StorageController.Status. Usually after iLO acknowledges
        ControllerPreviousError event, FW clears the condition from the
        StorageController.Status.Conditions[] list.
    • Redfish Metrics GET Support for DriveMetrics, EnvironmentMetrics and
      VolumeMetrics
      • DriveMetrics: BadBlockCount, ReadIOKiBytes, WriteIOKiBytes,
        PowerOnHours, NVMeSMART (MVMeSMART attributes are supported
        for NVMe drive only)
      • EnvironmentMetrics for Drive Resource: TemperatureCelsius.Reading
      • VolumeMetrics: ConsistencyCheckCount, ConsistencyCheckErrorCount,
        RebuildErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches
        the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or
        Redfish ResetToDefaults.ResetAll.
  • Add support for Redfish Parallel Resource PDR. The feature reduce iLO resource
    required to support controller related Metrics.
  • Add support for UBM11 backplane
  • Enhanced the UBM backplane firmware update process to eliminate the risk of firmware
    corruption when transferred data becomes corrupted
  • Refine the message on HII prereview configuration for the foreign import
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase
  • Return error when enabling encryption with 256 characters in the
    "EncryptionKeyIdentifier" property through Redfish
    • ]]>
  • Fix an issue that Backup Exec doesn’t work with LTO drives in Linux systems
  • Fix a rare issue that controller VM fails to bootup after a host reboot on Linux hypervisor
  • Fix an issue that poor performance is observed during small-range writes
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on
    NVMe drives
  • Fix a rare issue that PL fault 0x4318 is observed during the IPMI power-cycle test
  • Fix a rare issue that cache restore failure observed after firmware update followed by a
    server UMCE (unrecoverable machine check error)
  • Fix an issue that firmware may assert when NVME drives take long time for Task
    Management
  • Fix a rare issue that PL fault 0x6054 observed during patrol read in progress
  • Fix a rare issue that firmware may assert during firmware update with IOs and task
    managements on JBOD drives.
  • Fix an issue that foreign drive is shown in HotspareType@Redfish.AllowableValues
  • Fix an issue that SATA LFF drives list the "DriveFormFactor" as "2_5" under the Storage
    tab and in Redfish
  • Fix an issue that Server health shows Warning when a degraded volume is present
  • Fix a rare issue that GET operation on Redfish Drive URI occasionally return 404 Not Found
  • Fix an issue that rebuild does not start on an SED drive when inserted in the missing slot of a R1 drive
  • Fix an issue that NVME drive undergoing sanitize is not detected after server reboot
  • Fix a rare issue that Redfish Chassis properties are not properly displayed for UBM10
    backplane
  • Fix an issue that PCIConfiglink page events may come continuously in snapdump log
  • Fix a rare issue that firmware may assert when user starts crypto erase and removed the
    drive
  • Fix an issue that the sanitize percentage does not progress when monitoring drive's
    sanitize state
  • Fix a rare issue that PLDM Fault 0x5: Command abort failed observed when doing
    backplane firmware update
  • Fix a rare firmware crash that may occur during concurrent Virtual Machine clone
    operations and JBOD creation
  • Fix an issue that firmware may assert if drive goes through shield recovery and is
    subsequently removed
  • Fix a rare issue that firmware may assert while running IO's and Task Management
    • ]]>
  • Aero PR12 Final Production
    • ]]>
  • Add additional escape sequences for special characters when encoding BEJString to comply with the DMTF specification. iLO 7 1.20, iLO6 1.74 and iLO5 3.18 are required to support this change.
  • DMTF PLDM Redfish Device Enablement enhancements
    • Add support for Redfish Conditions (GET)
      • Each resource contains a conditions table that lists the appropriate
        MessageId and MessageSeverity. Redfish messages impact the Redfish
        resource Status object. Any outstanding message will appear in the
        Redfish Status[Conditions] array. The highest Status[Conditions][Severity]
        sets the overall Status[Health] of the resource. When the
        Status[Conditions] array is empty the Status[Health] shall be OK.
      • Port Conditions do not display any condition other than OK
      • In scenarios where ControllerPreviousError condition happens, the same
        is listed under StorageController.Status. Usually after iLO acknowledges
        ControllerPreviousError event, FW clears the condition from the
        StorageController.Status.Conditions[] list.
    • Redfish Metrics GET Support for DriveMetrics, EnvironmentMetrics and
      VolumeMetrics
      • DriveMetrics: BadBlockCount, ReadIOKiBytes, WriteIOKiBytes,
        PowerOnHours, NVMeSMART (MVMeSMART attributes are supported
        for NVMe drive only)
      • EnvironmentMetrics for Drive Resource: TemperatureCelsius.Reading
      • VolumeMetrics: ConsistencyCheckCount, ConsistencyCheckErrorCount,
        RebuildErrorCount
      • Each counter can hold a value up to 65535. Once the counter reaches
        the maximum value the value is not reset.
      • Metrics are cleared when user performs Controller NVRAM clear or
        Redfish ResetToDefaults.ResetAll.
  • Add support for Redfish Parallel Resource PDR. The feature reduce iLO resource
    required to support controller related Metrics.
  • Add support for UBM11 backplane
  • Enhanced the UBM backplane firmware update process to eliminate the risk of firmware
    corruption when transferred data becomes corrupted
  • Refine the message on HII prereview configuration for the foreign import
  • Removed the Sanitize Secure Erase option from MRSA for SED drives, as SEDs
    support only Cryptographic Erase
  • Return error when enabling encryption with 256 characters in the
    "EncryptionKeyIdentifier" property through Redfish
    • ]]>
  • Fix an issue that Backup Exec doesn’t work with LTO drives in Linux systems
  • Fix a rare issue that controller VM fails to bootup after a host reboot on Linux hypervisor
  • Fix an issue that poor performance is observed during small-range writes
  • Fix an issue that storcli show /cx/ex/sx poh (power on hour) command report error on
    NVMe drives
  • Fix a rare issue that PL fault 0x4318 is observed during the IPMI power-cycle test
  • Fix a rare issue that cache restore failure observed after firmware update followed by a
    server UMCE (unrecoverable machine check error)
  • Fix an issue that firmware may assert when NVME drives take long time for Task
    Management
  • Fix a rare issue that PL fault 0x6054 observed during patrol read in progress
  • Fix a rare issue that firmware may assert during firmware update with IOs and task
    managements on JBOD drives.
  • Fix an issue that foreign drive is shown in HotspareType@Redfish.AllowableValues
  • Fix an issue that SATA LFF drives list the "DriveFormFactor" as "2_5" under the Storage
    tab and in Redfish
  • Fix an issue that Server health shows Warning when a degraded volume is present
  • Fix a rare issue that GET operation on Redfish Drive URI occasionally return 404 Not Found
  • Fix an issue that rebuild does not start on an SED drive when inserted in the missing slot of a R1 drive
  • Fix an issue that NVME drive undergoing sanitize is not detected after server reboot
  • Fix a rare issue that Redfish Chassis properties are not properly displayed for UBM10
    backplane
  • Fix an issue that PCIConfiglink page events may come continuously in snapdump log
  • Fix a rare issue that firmware may assert when user starts crypto erase and removed the
    drive
  • Fix an issue that the sanitize percentage does not progress when monitoring drive's
    sanitize state
  • Fix a rare issue that PLDM Fault 0x5: Command abort failed observed when doing
    backplane firmware update
  • Fix a rare firmware crash that may occur during concurrent Virtual Machine clone
    operations and JBOD creation
  • Fix an issue that firmware may assert if drive goes through shield recovery and is
    subsequently removed
  • Fix a rare issue that firmware may assert while running IO's and Task Management
    • ]]>
  • To support HPE NS204mff Boot Controller
    • ]]>
  • Aligning OCP specification to enhance stability with particular SSDs.
    • ]]>
  • Aero PR12 GCA
    • ]]>
  • Added PowerSrbTimeout in subkey parameters value in INF File.
    • ]]>         TBD

    ]]>
  • This product enhances the tg3 driver to support register read and write operations through private ioctl commands on Linux.
    • ]]>
  • This product fixes the issue where a kernel BUG_ON may occur during tg3 driver resource cleanup.
  • This product fixes the issue where a scheduling-while-atomic warning may occur in the tg3 driver.
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>
  • This product enhanced Linux driver compatibility and production readiness for supported enterprise Linux.
    • ]]>
  • This product fixed a potential Linux driver crash during hardware timestamp processing.
  • This product fixed Linux link state event reporting so firmware and software report the correct link state.
  • This product fixed Linux MAC address reporting so MAC address changes are reflected immediately
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         Please refer to Enhancements section of iLO8 release notes using below link.

    iLO8 v1.10.00 Release Notes

    ]]>         Please refer to Fixes iLO8 release notes using below link.

    iLO8 v1.10.00 Release Notes

    ]]>
  • This product added support for improved operating system interrupt reporting.
  • This product enhanced receive traffic processing for better efficiency and consistency.
    • ]]>
  • This product fixed issues that could affect packet receive processing in poll mode, receive traffic interrupt handling, INF message handling, and driver cleanup during Miniport unload.
    • ]]>
  • This product added support for improved operating system interrupt reporting.
  • This product enhanced receive traffic processing for better efficiency and consistency.
    • ]]>
  • This product fixed issues that could affect packet receive processing in poll mode, receive traffic interrupt handling, INF message handling, and driver cleanup during Miniport unload.
    • ]]>
  • Aero PR12 GCA
    • ]]>
  • Improved handling of dma_alignment and the NVMe boundary mask for better
    compatibility across kernel versions
    • ]]>
  • Fix an issue that NVMe device properties function lacks NULL checks before using request_queue->limits
  • Fix IOMMU exceptions for some commands. The affected commands are
    • REPORT ZONES (opcode 0x95, service action 0x00)
    • GET PHYSICAL ELEMENT STATUS (opcode 0x9E, service action 0x17)
    • SECURITY PROTOCOL IN (opcode 0xA2)
  • Fixed an issue where zero-length ATA VPD inquiry commands were not handled
    correctly and failed with a non-standard status code (0xF0)
  • Fix SCSI host template callback for kernel 6.12
    • ]]>         Initial version

    ]]>         Security fixes

    ]]>         Security fixes

    ]]>         This product fixed an issue where NIC link up/down events were registered twice per port.

    ]]>         This product fixed an issue where NIC link up/down events were registered twice per port.

    ]]>         Changes included in version 26.49.1014(A):

    • Product rebuilt with dual signing key (RSA + ML-DSA).

    No new features or changes are included in version 26.49.1014.

    ]]>         The following issues have been fixed in version 26.49.1014:

    • Live migration target would not receive a port state change event on the resume VHCA command. The target now generates this event so software that depends on port state is notified of any changes.
    • PCC issue where RDMA traffic would stall at large scale for certain IP and UDP source-port combinations when a PCC user algorithm was active and no CC algorithm was configured in slot 0.
    ]]>         No new features or changes are included in version 26.49.1014.

    ]]>         The following issues have been fixed in version 26.49.1014:

    • Live migration target would not receive a port state change event on the resume VHCA command. The target now generates this event so software that depends on port state is notified of any changes.
    • PCC issue where RDMA traffic would stall at large scale for certain IP and UDP source-port combinations when a PCC user algorithm was active and no CC algorithm was configured in slot 0.
    ]]>