# changelog

author: Broadcom Automated Build User
changelog:
  - Changed version to 11.2
  - Updated libbrcmdfc library 
  - Updated libbrcmemsdm library 
  - Updated libbrcmhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 11.4
  - Updated libbrcmdfc library 
  - Updated libbrcmemsdm library 
  - Updated libbrcmhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 12.0
  - Updated libbrcmdfc library 
  - Updated libbrcmemsdm library 
  - Updated libbrcmhbaapi library


author: Emulex Automated Build User
changelog:
  - Initial RPM release
  - Changed version number to 6.4.9.2
  - Added libdfc 4.2.25
  - Added libdfc 3.2.23
  - Added libemulexhbaapi 2.3.b
  - Added libemsdm.so 1.1


author: Emulex Automated Build User
changelog:
  - Changed version number to 6.4.10.2
  - Fixed Bug 144987: Updated release string on RHEL 6
  - Fixed Bug 145311: Improved Requires and Provides tag entries


author: Emulex Automated Build User
changelog:
  - Changed version to 10.7
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library 
  - Added support for RHEL 7.2, SLES12 SP1


author: Broadcom Automated Build User
changelog:
  - Changed version to 11.2
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: Broadcom Automated Build User
changelog:
  - Changed version to 11.4
  - Updated libdfc library 
  - Updated libemsdm library 
  - Updated libemulexhbaapi library


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added NPIV QoS Support
  Introduced: v6.01 build1
  Impact: HW: ISP24xx, ISP25xx
  	OS: RHEL 6.x, SLES 11.x
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: 32bit pointers not converted properly on Big Endian systems
  Solution: Use correct value during 64bit pointer/value conversion
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Loopback failure requires reset of the firmware
  Solution: Invoked reset after loopback failure is detected
  Introduced: v6.00 build18
  Impact: HW: ISP25xx, ISP2031, ISP8001, ISP8021, ISP8031
  	OS: RHEL 5.x, RHEL 6.x, SLES 10.x, SLES 11.x
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: A log message is seen in /var/log/messages while accessing
  	 QLogic's Udev files
  Solution: Read Udev Rules file in read-only mode to get Udev Names of disks
  Introduced: v4.00 build15
  Impact: HW: All adapters
  	OS: RHEL 6.2, RHEL 6.3
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: Some QLogic mezz adapters needs to read/write data on devices
  	 connected through I2C bus on the adapter
  Solution: Add I2C read/write support
  Introduced: v6.01 build1
  Impact: HW: ISP25xx, ISP2031
  	OS: RHEL 5.x, RHEL 6.x, SLES 10.x, SLES 11.x
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: API segfaults if a faulty adapter is not completely detected
  Solution:  Ignore adapter if partially detected.
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Get FW Dump Support for sysfs based drivers
  Introduced: v6.01 build1
  Impact: HW: All adapters
  	OS: RHEL 6.x, SLES 11.x
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add FCE Trace Buffer support
  Introduced: v6.01 build1
  Impact: HW: ISP25xx, ISP2031, ISP8001, ISP8031
  	OS: RHEL 6.x, SLES 11.x
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build2:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Read Model Description from VPD for ISP2031/ISP8031 adapters
  Introduced: v6.01 build2
  Impact: HW: ISP2031, ISP8031
  	OS: RHEL 5.x, RHEL 6.x, SLES 10.x, SLES 11.x
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Flash read fails through vports for ISP24xx adapters
  Solution: Allow flash read using vport handle for ISP24xx adapters
  Introduced: v6.00 build1
  Impact: HW: ISP24xx
  	OS: RHEL 5.x, RHEL 6.x, SLES 10.x, SLES 11.x
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build3:
  -------------
  Defect/Enhancement: Defect
  Problem: "Encounterd and error loading: /usr/lib/libqlsdm.so" message seen
  	 when adapter not present or driver not loaded
  Solution: Return success for load library
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build4:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Read Board Temperature for ISP2031/IS8031 adapters
  Introduced: v6.01 build4
  Impact: HW: ISP2031, ISP8031
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build5:
  -------------
  Defect/Enhancement: Defect
  Problem: Boot Code expansion region is not flashed during flash update
  Solution: Update Boot Code expnasion region
  Introduced: v4.00 build2
  Impact: HW: ISP2532
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build1:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Added ISP8044 support
  Introduced: v6.02 build1
  Impact: HW: ISP8044
  	OS: All supported Linux flavors
  	Protocol: FCoE

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Added EP2831 support
  Introduced: v6.02 build1
  Impact: HW: EP2831
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Added EP8831 support
  Introduced: v6.02 build1
  Impact: HW: EP8831
  	OS: All supported Linux flavors
  	Protocol: FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build2:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Update Flash versions without reset after flash update
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Retry flash operations after a delay when driver returns BUSY
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Send only Report LUNs command on first LUN found
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build3:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add SerDes Register read/write support
  Introduced: v6.02 build3
  Impact: HW: ISP2031
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build4:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add 32bit SerDes Register read/write support
  Introduced: v6.02 build4
  Impact: HW: ISP8044
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Allow FCoE context reset for ISP8044 after NVRAM update
  Introduced: v6.02 build4
  Impact: HW: ISP8044
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Defect
  Problem: Targets are not visible if Lun 0 is not present
  Solution: Find first valid LUN found and send SCSI comands on it
  Introduced: v6.02 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build7:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add ECHO ELS support
  Introduced: v6.02 build7
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Additional data sent in get statistics
  Solution: Removed invalid code from get statistics
  Introduced: v6.00 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build9:
  -------------
  Defect/Enhancement: Defect
  Problem: Get statistics failing on RHEL5/SLES10
  Solution: Use min data size for statistics required by driver
  Introduced: v6.00 build7
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build12:
  -------------
  Defect/Enhancement: Defect
  Problem: CT Ping failing in ESXi 5.0/5.1
  Solution: Corrected code to get valid topology
  Introduced: v6.00 build10
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.02 build11:
  -------------
  Defect/Enhancement: Defect
  Problem: Lun persistent names failing on RHEL7
  Solution: Use ATTR(S){} or SYSFS{} in udev rules based on udev version
  Introduced: v5.00 build6
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.02 build10:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add D-Port Diagnosic info support
  Introduced: v6.02 build10
  Impact: HW: ISP2031, ISP8031
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build13:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add Fabric Priority support for ESXi
  Introduced: v6.02 build13
  Impact: HW: ISP2031, ISP8031
  	OS: VMware ESXi 5.1
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add supported list of adapters in Provides section 
  Introduced: N/A
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.03 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP2071 and ISP2271 support
  Introduced: v6.03 build1
  Impact: HW: ISP2071 and ISP2271 based adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.03 build3:
  -------------
  Defect/Enhancement: Defect
  Problem: HBA_GetFcpTargetMapping fails for LUN number > 256
  Solution: Honor LUN addressing method while reading LUN numbers for
  	  HBA_GetFcpTargetMapping API with LUN numbers > 256
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: HBA_SendScsiInquiry and HBA_SendReadCapacity fails
  	 for LUN number > 256
  Solution: Use SAM-2 LUN addressing for HBA_SendScsiInquiry and
  	  HBA_SendReadCapacity SNIA APIs for LUN numbers > 256
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.03 build10:
  -------------
  Defect/Enhancement: Defect
  Problem: Access denied messages seen on VMware ESXi 5.1
  Solution: Block get shared database count API for ESXi
  Introduced: Day One
  Impact: HW: All adapters
  	OS: VMware ESXi 5.1
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: SDGetQoS API succeeds even if QoS region is not
  	 present in the flash
  Solution: Add QoS region check in SDGetQoS API
  Introduced: v6.02 build13
  Impact: HW: ISP2031, ISP8031, ISP2071, ISP2271
  	OS: VMware ESXi 5.1
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP2261 support
  Introduced: v6.03 build10
  Impact: HW: ISP2261 based adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add MPI and PEP versions for 27xx adapters
  Introduced: v6.03 build10
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.04 build3:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add ppc64le (64-bit little endian PowerPC) API support
  Introduced: N/A
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Online Flash update support
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Smart SAN API support
  Introduced: v6.04 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Flash update fails if online flash update feature is disabled
  	 or not supported by QLogic applications
  Solution: Allow flash update if online flash update feature is disabled
  	  or not supported by QLogic applications
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.04 build8:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Return FW status in BBCR API for port down case
  Introduced: v6.04 build6
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build6:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Buffer-to-Buffer Credit Recovery API support
  Introduced: v6.04 build6
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Private Statistics API support
  Introduced: v6.04 build6
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Multiple application may do flash update simultaneously for
  	27xx adapters
  Solution: Use serial number based file for 27xx flash update token
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: VMware ESXi 5.1
  	Protocol: FC

  v6.04 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Read FW attributes at API initialization
  Introduced: v6.04 build5
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build4:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Validate Capabilities and Outage duration before FW activation
  Introduced: v6.04 build4
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.04 build12:
  -------------
  Defect/Enhancement: Defect
  Problem: timeout value is not properly converted from seconds into milliseconds
  Solution: Avoid converting timeout value twice into 
  	CPQFC_SendScsiCommandEx API
  Introduced: v6.04 build12
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build11:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add CPQFC_SendScsiCommandEx API support
  Introduced: v6.04 build11
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build10:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add DPort Diagnostics support
  Introduced: v6.04 build10
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Extended Private Statistics API support
  Introduced: v6.04 build10
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Add Linux ARM (Euler) support
  Introduced: v6.04 build10
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  v6.04 build9:
  -------------
  Defect/Enhancement: Defect
  Problem: Flash MPI and PEP version are seen out-of-sync
  Solution: Read flash MPI and PEP verions from primary set
  Introduced: v6.04 build1
  Impact: HW: ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC


author: scm_be <scm_be@emulex.com> 10.2.323.6
changelog:
  - Added RHEL 7 support
  - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E


author: Chad Dupuis <Linux_SWdeliverables@external.groups.hp.com> 3.0-1
changelog:
  - Initial version that works with inbox fibre channel drivers only
    (Severity: Critical)
  - Fix grep statement that parses /sys/block for sd devices in lssd
    (Severity: Minor)
  - Add support for five character device names in lssd (Severity: Minor)
  - Fix parsing of sdsd* devices in lssd


author: Chad Dupuis <Linux_SWdeliverables@external.groups.hp.com> 3.1-1
changelog:
  - Added support for Brocade HBAs (Severity: Medium)
  - Added support for getting WWN from MSA2xxx devices in scsi_info


author: Kumar Rahul<Linux_SWdeliverables@external.groups.hp.com> 3.2-5
changelog:
  - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards


author: Shreya Roy Chowdhury<Linux_SWdeliverables@external.groups.hp.com> 3.2-6
changelog:
  - Corrected Link state display information for Qlogic Adapters
  - Added MSA G3 support in Scsi_info.h


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.02
changelog:
  -     We now have seperate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Added support for Red Hat Enterprise Linux 7 operating system.  
      Added support for the following devices:  
      
      
        * HP StoreFabric CN1200E Dual Port Converged Network Adapter
        * HP FlexFabric 20Gb 2-port 650FLB Adapter
        * HP FlexFabric 20Gb 2-port 650M Adapter
        * HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
      
      Initial CNA (XE100 series) firmware 10.2.340.19  
      Updated CNA (BE3) firmware 10.2.340.19
      
      Contains:  
      CNA (BE2) firmware 4.9.416.2 (frozen)  
      CNA (BE3) firmware 10.2.340.19  
      CNA (XE100 series) firmware 10.2.340.19


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.02
changelog:
  -     *Firmware**  
        
      CNA (BE2) - 4.9.416.2  
      
        * Corrects an issue where a CN1000E CNA fails to maintain login in a multi-FCF environment.
      CNA (BE3) - 10.2.340.19  
      
        * Corrects an issue where a CN1000E CNA fails to maintain login in a multi-FCF environment.
        * Resolves an issue where the CNA stops passing traffic when promiscuous mode is turned off.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.03
changelog:
  -     We now have seperate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware 10.2.340.22  
        
      This is the minimum firmware version, 10.2.340.22,  for support with Virtual
      Connect (VC) 4.30 for the following products:
      
        * HP FlexFabric 20Gb 2-port 650FLB Adapter
        * HP FlexFabric 20Gb 2-port 650M Adapter 
      **Contains:**  
        
      CNA (BE2) firmware 4.9.416.2 (frozen)  
      CNA (BE3) firmware 10.2.340.19  
      CNA (XE100 series) firmware 10.2.340.22


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.04
changelog:
  -     We now have seperate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (BE3) firmware 10.2.340.25  
        
      **Contains:**  
        
      CNA (BE2) firmware 4.9.416.2 (frozen)  
      CNA (BE3) firmware 10.2.340.25  
      CNA (XE100 series) firmware 10.2.340.22


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.04
changelog:
  -     The updated BE3 firmware, version 10.2.340.25, contained in this component
      resolves the following:
      
        *  System hangs if a vswitch of teamed interfaces is created.
        *  LUN's do not come back online after a reboot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.05
changelog:
  -     We now have seperate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      This component contains the minimum firmware version, 10.2.340.22,  for
      support with Virtual Connect (VC) 4.30 for the following products:
      
        * HP FlexFabric 20Gb 2-port 650FLB Adapter
        * HP FlexFabric 20Gb 2-port 650M Adapter
      
      **Contains:**  
        
      CNA (BE2) firmware 4.9.416.2 (frozen)  
      CNA (BE3) firmware 10.2.340.19  
      CNA (XE100 series) firmware 10.2.340.22


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.05
changelog:
  -     HP Smart Update Manager (HP SUM) can now downgrade and rewrite this component
      successfully. Previous versions of this product starting with version
      2014.09.02 could not be downgraded or rewritten using HP SUM even if the FORCE
      flag was set while deploying with HP SUM.
      
      Please note that the binary content of this component is the same as the
      previous version 2014.09.03 (CP024783.scexe). Thus, there is no need to update
      to this component if the firmware is already at the version contained in the
      component versioned 2014.09.03.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.01
changelog:
  -     We have seperate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Added support for HP Ethernet 10Gb 2-port 557SFP+ Adapter  
      Added support for SLES 12  
        
      Updated CNA (XE100 series) firmware 10.2.477.10  
      Updated CNA (BE3) firmware 10.2.477.10  
        
      Contains:  
      CNA (BE2) firmware 4.9.416.2 (frozen)  
      CNA (BE3) firmware 10.2.477.10  
      CNA (XE100 series) firmware 10.2.477.10


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.01
changelog:
  -     *Firmware**  
        
      CNA (BE3) - 10.2.477.10  
        
      This firmware version resolves the following:  
      
        * an issue when the configuration variables exceed a total setup of 121 bytes.  There is the potential to corrupt the configuration during the save process.
        * an issue where an HP FlexFabric 554FLB adapter experiences pause frame flood and is unable to get into the NIC BIOS.
      CNA (XE100 series) - 10.2.477.10  
        
      This firmware version resolves the following:  
        
      
        * an issue when the configuration variables exceed a total setup of 121 bytes.  There is the potential to corrupt the configuration during the save process.
        * an issue where an HP FlexFabric 650FLB fails to show correct Remote Device Information.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.02
changelog:
  -     We have seperate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware 10.2.477.23  
        
      Contains:  
      CNA (BE2) firmware 4.9.416.2 (frozen)  
      CNA (BE3) firmware 10.2.477.10  
      CNA (XE100 series) firmware 10.2.477.23


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.02
changelog:
  -     *CNA (XE100 series) firmware version 10.2.477.23**
      
        * Resolves VMQ issues which resulted in virtual machines not being connected to any network
        * Unable to perform PXE boot with a HP FlexFabric 2-port 650FLB Adapter in a 1Gb environment.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.01
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware 10.5.65.21  
      Updated CNA (BE3) firmware 10.5.65.21
      
      Updated CNA (BE2) firmware 4.9.416.7
      
      **Contains:**
      
      CNA (BE2) firmware 4.9.416.7  
      CNA (BE3) firmware 10.5.65.21  
      CNA (XE100 series) firmware 10.5.65.21


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.01
changelog:
  -     *Firmware**
      
      CNA (BE2) - 4.9.416.7
      
        * Resolved performance issues while accessing data using FTP
      
      CNA (BE3) - 10.5.65.21
      
        * Long boot times due to duplicate iSCSI target entries observed in iSCSISelect
        * Resolved issue where link does not come up for VF on VM when state changes from disable to auto using ip link cmd on hypervisor
        * Corrected ability to add iSCSI target from UEFI iSCSI BIOS in vNIC1 mode
        * VC defined PWWN's are not pushed to adapter and adapter still uses factory defined PWWNs for fabric login
      
      CNA (XE100 series) - 10.5.65.21
      
        * Long boot times due to duplicate iSCSI target entries observed in iSCSISelect
        * Resolved issue where link does not come up for VF on VM when state changes from disable to auto using ip link cmd on hypervisor
        * Corrected ability to add iSCSI target from UEFI iSCSI BIOS in vNIC1 mode
        * VC defined PWWN's are not pushed to adapter and adapter still uses factory defined PWWNs for fabric login
        * Unable to change adapter, HP FlexFabric 650FLB, personality in RBSU in Legacy BIOS boot mode
        * Assigning 1Gig connection to HP FlexFabric 650FLB adapter causes the link go down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.03
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware 10.5.65.25
      
      **Contains:**
      
      CNA (BE2) firmware 4.9.416.7  
      CNA (BE3) firmware 10.5.65.21  
      CNA (XE100 series) firmware 10.5.65.25


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.03
changelog:
  -     *Firmware**
      
      CNA (XE100 series) - 10.5.65.25
      
        * Resolves an issue when the HP FlexFabric 650FLB Adapter is upgraded from firmware version 10.2.477.23 to 10.5.65.21, the card enters into an unrecoverable state if there is a FAT dump stored on the card from firmware version 10.4.179.0 or earlier.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.02
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware 10.5.160.0  
      Updated CNA (BE3) firmware 10.5.155.0
      
      Contains:  
      CNA (BE3) firmware 10.5.155.0  
      CNA (XE100 series) firmware 10.5.160.0
      
      CNA (BE2) firmware 4.9.416.7


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.02
changelog:
  -     *Firmware**
      
      CNA (BE3) - 10.5.155.0
      
        * Resolves an issue where after updating the firmware to 10.5.155.0 on an Emulex CNA adapter in a c-Class Virtual Connect environment with more than one uplink, only one uplink remains connected, the others are dropped.
      
      CNA (XE100 series) - 10.5.160.0
      
        * Resolves an issue where after updating the firmware to 10.5.156.0 on an Emulex CNA adapter in a c-Class Virtual Connect environment with more than one uplink, only one uplink remains connected, the others are dropped.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.03
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware 10.5.160.1
      
      Contains:  
      CNA (BE3) firmware 10.5.155.0  
      CNA (XE100 series) firmware 10.5.160.1
      
      CNA (BE2) firmware 4.9.416.7


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.03
changelog:
  -     *Firmware**
      
      CNA (XE100 series) - 10.5.160.1
      
      The purpose of the FW is to disable the SMBUS functionality on the C-Class
      Adapters.
      
      This in turn will disable all MCTP commands for the adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.02
changelog:
  -     We have separate components to update Fibre Channel and converged network
      adapters. This is a converged network adapter update component.  
      
      
      Updated CNA(BE2) firmware 4.9.416.15
      
      Updated CNA (BE3) firmware 10.7.110.31  
      Updated CNA (XE100 series) firmware 10.7.110.34
      
      Contains:  
        
      CNA (BE2) firmware 4.9.416.15  
      CNA (BE3) firmware 10.7.110.31  
      CNA (XE100 series) firmware 10.7.110.34  
      
      
      Changes to BE3/XE100 series firmware:
      
        * Added support for HPE StoreFabric CN1200E-T Adapter
        * Added support for HPE FlexFabric 10Gb 2-port 556FLR-T Adapter
        * Added Flex10Qbg v0.68 support
        * Added UEFI HII menu Enable/Disable option for OCSD/OCBB Shared Memory Model
      
      Changes to XE100 series firmware:
      
        * Updated driver to set link state based when there is a physical link toggle and DCC is unavailable
        * Hardening of FAT utility to prevent unrecoverable state caused by FAT file mismatch seen during diagnostics


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.02
changelog:
  -     CNA (XE100 series) 10.7.110.34
      
        * Network disconnect observed on servers with HP FlexFabric 650FLB adapters installed.
        * SAN disconnects when OneView is rebooted.
      
      CNA (BE2) 4.9.416.15
      
        * Corrects data instability during read operations on the HP NC551i FlexFabric Network Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.03
changelog:
  -     We have separate components to update Fibre Channel and converged network
      adapters. This is a converged network adapter update component.
      
        
      Updated CNA (XE100 series) firmware 10.7.110.45
      
      Contains:  
        
      CNA (BE2) firmware 4.9.416.15  
      CNA (BE3) firmware 10.7.110.31  
      CNA (XE100 series) firmware 10.7.110.45


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.03
changelog:
  -     Resolves an issue with the HP FlexFabric 650FLB adapter which resulted in Boot
      from SAN not working as expected after applying the April 2016 SPP


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.08.01
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware 10.7.340.0  
      Updated CNA (BE3) firmware 10.7.316.0
      
      Updated CNA (BE2) firmware 4.9.416.15
      
      Contains:  
      CNA (BE3) firmware 10.7.316.0  
      CNA (XE100 series) firmware 10.7.340.0
      
      CNA (BE2) firmware 4.9.416.15


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.08.01
changelog:
  -     BE3 and XE100 series adapters
      
        * Fixed issue where, when failing back to an existing virtual link that was disabled and later re-enabled, an abort occurred during the plogi exchange in the data plane
        * Fixed issue where NIC disconnects after multiple iSCSI target flash writes


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.01
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware  
      Updated CNA (BE3) firmware
      
      **Firmware**
      
      BE3/XE100 series:
      
        * Added automatic recovery from errors that previously required a system reboot
        * Added Secure Firmware Update support
        * Added PMCI Implementation Spec v1.03 (Active Health over MCTP)
      
      Contains:  
      CNA (BE3) firmware 11.1.183.23  
      CNA (XE100 series) firmware 11.1.183.23


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.03
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware  
      
      
      Contains:  
      CNA (BE3) firmware 11.1.183.23  
      CNA (XE100 series) firmware 11.1.183.48


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.03
changelog:
  -     This fix improves the synchronization of the information crossing between two
      different interfaces


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.05
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware  
      
      
      Contains:  
      CNA (BE3) firmware 11.1.183.23  
      CNA (XE100 series) firmware 11.1.183.62


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.05
changelog:
  -     This fix resolves the following:
      
        * unexpected behavior in which ProLiant Gen 9 c-class server blades equipped with 650FLB or 650M adapters may not complete Power-On Self Test (POST)
        * unexpected behavior which occurred after upgrading firmware to 11.1.183.23, resulting in network ports losing connections
        * unexpected behavior in which 650FLB network ports were inadvertently assigned the same MAC address, resulting in network packets being sent to the incorrect ports.
        * behavior in which Microsoft Windows terminates unexpectedly


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.07
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (BE3) firmware  
      
      
      Contains:  
      CNA (BE3) firmware 11.1.183.651  
      CNA (XE100 series) firmware 11.1.183.624


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.07
changelog:
  -     This fix resolves  the following:
      
      BE3-based blade Converge Network Adapters HP FlexFabric 10Gb 2-port 554FLB
      Adapter and HP FlexFabric 10Gb 2-port 554M Adapter does not complete to
      initialize properly with 1Gb interconnect modules
      
      For more details please go through the document titled "HPE Network Adapters -
      Certain HPE Emulex Based Converged Network Adapters With CNA (BE3) Firmware
      Version 11.1.183.23 For HPE BladeSystem Server Blades May Not Initialize
      Correctly" at the following link:
      
      <https://internal.support.hpe.com/hpsc/doc/display?docId=emr_na-
      a00050176en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.01
changelog:
  -     Added support for the following:
      
        
          HPE UEFI 2.0  
          Data Center interconnect (Dci) / Active Service Network (ASN)
      configuration defaults.  
          NIC Discovery and Configuration via iLO  
          Single Transmit(TX) queue for Bandwidth(BW) capping with multiple
      Receive(Rx) queues for Receive Side Scaling (RSS) via Linux NIC Driver  
          Ability to notify user that OneView is already in control of the adapter
      when OneCommand Manager (OCM) is loaded.
      
      Support for following specs:
      
        
      a.    Inter-IC(I2C) Interface Spec v2.01  
      b.    Data Center interconnect (Dci) spec  
      c.    Abstract Syntax Notation One (ASN.1)
      
      Updated CNA (XE100 series) Firmware
      
      Contains:
      
      CNA (XE100 series) firmware 11.2.1226.20


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.01
changelog:
  -     Resolves the following:
      
          HPE FlexFabric 20Gb 650FLB Adapter using 10.2 driver/firmware NICs went
      into an incomplete state  
          HPE FlexFabric 20Gb 650FLB Adapter in which multiple Virtual Connect
      links could result in an unexpected termination of the Windows Operating
      System


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.09.01
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware
      
      **Firmware**
      
      Contains:  
      CNA (XE100 series) firmware 11.2.1263.19


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.09.01
changelog:
  -     Fixed the following:
      
        * Resolves unexpected behavior where 650 FLB and M adapters throw "PCIe Link Bandwidth Reduction" events
        * Resolves unexpected behavior where 650M adapter goes missing from OS post Hotfix FW flash of 11.1.183 build 32
        * Fixed the unexpected behavior where HP BL460c Gen10 system is powered off after flashing 11.2.1223.0 firmware and iLO5 Thermal tab is reporting Overheating temperature 122C for 650FLB adapter
        * Resolves an unexpected behavior where Network adapters has no network information in Active Health System (AHS) logs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.02.01
changelog:
  -     Added support for the following:
      
      UEFI:
      
        * Modify Fibre Channel over Ethernet (FCoE) code base to compile with Unreal Development Kit 2015(UDK2015) for access to new Unified Extensible Firmware Interface (UEFI)
        * Implement HP Unified Extensible Firmware Interface (UEFI) reqs - spec changes from 2.2 and 2.3
      
      Firmware:
      
        * Security Encryption for Internet Small Computer System Interface(iSCSI) Challenge Handshake Authentication Protocol (CHAP) and Data Center Interconnect(DCi) config data
        * Platform Management Components Intercommunication (PMCI) v1.1.0 - which also covers Network Controller Sideband Interface (NC-SI) requirements V1.01
        * Active Health System (AHS) Device Capabilities support in the Auxiliary Port (Aux) power
      
      Updated CNA (XE100 series) firmware:
      
      **Contains:**
      
      CNA (XE100 series) firmware 11.4.1231.6


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.02.01
changelog:
  -     Fixed the following:
      
      UEFI:
      
        * Boot From SAN(BFS) volume is seen offline during Microsoft Windows 2016 Operating System install with 11.2.1263.19 Firmware
        * Removal of Boot entry from card Basic Input /Output System(BIOS) caused a red screen on HPE ProLiant ML350 Gen10 Server
      
      BIOS/Firmware:
      
        * HP FlexFabric 20Gb 2-port 650M Adapter goes missing from Operating System (OS) post 1.1.183.624 firmware flash
        * Excessive number of timeouts overflowing Noted All or Nothing Gate(NAND)
        * For HP StoreFabric CN1200E 10Gb Converged Network Adapter and HPE StoreFabric CN1200E-T 10GBASE-T Converged Network Adapter Firmware Active Health System (AHS) log incorrect part number
        * Name of HP StoreFabric CN1200E 10Gb Converged Network Adapter show incomplete in Active Health System (AHS)
        * For HP FlexFabric 20Gb 2-port 650FLB Adapter "Function Driver" is missing in Active Health System (AHS) field
        * Ports of HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter/HPE StoreFabric CN1200E-T 10GBASE-T Converged Network Adapter will become Disconnected in ESXI6.0 update 3 Operating System
        * Server Profile Health Status is not stable during Power on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.02.02
changelog:
  -     Updated CNA (XE100 series) firmware:
      
      **Contains:**
      
      CNA (XE100 series) firmware 11.4.1253.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.02.02
changelog:
  -     Fixed the following:
      
        * Uplink status on down link
        * PFC enable/disable feature
      
      For more details please go through the document titled " HPE Network Adapters
      - On Certain HPE ProLiant Gen9 Servers Running Windows Server 2016 And
      Configured With Certain Network Adapters, a Series of Windows System Event Log
      Messages #153 On Windows 2016 May Be Encountered" which is available at the
      following link:
      
      <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00046322en_us>
      
      And the document titled "HPE Network Adapters - On Any HPE ProLiant
      Server Running VMware ESXi 6.0 or VMware ESXi 6.5, And Configured
      With Certain Network Adapters, The Network Ports May Show as Up,
      When These Should Show as Down In HPE iLO and In the OS" which is
      available at the following link:
      
      <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00046319en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.06.01
changelog:
  -     We have separate components to update fibre channel and converged network
      adapters.  This is a converged network adapter update component.  
        
      Updated CNA (XE100 series) firmware
      
      **Firmware**
      
      Contains:  
      CNA (XE100 series) firmware 12.0.1110.11


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.06.01
changelog:
  -     Fixed the following:
      
        * Add a check for zero capacity LUNs (Logical Units) and avoid creating device path for them.
        * HP StoreFabric CN1200E Dual Port Converged Network Adapter FCoE function only show "Slot 3 Port 3:CN1200E Function 2-FCoE"


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.72
changelog:
  -     *The following fix is added in this version:-**
      
        * Fixed an issue causing fan speed to run at the maximum level due to a false error indication reported on early production hardware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.72-3.1
changelog:
  -     Firmware upgrade to 1.72(C) is not necessary, if the device is currently
      running 1.72 firmware


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.72-3.1
changelog:
  -     *The following fix is added in this version:-**
      
      -Fixed an issue causing fan speed to run at the maximum level due to a false error indication reported on early production hardware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.64
changelog:
  -     *The following enhancement was incorporated in this version:**
      
        * Added support for 3610 and 3710 disk enclosures


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.04-1.1
changelog:
  -     *The following fix was incorporated in this version:**
      
        *  Fixed NVRAM CRC error
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v148867/D3000_P07231-001.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.04-2.1
changelog:
  -     *The following fix was incorporated in this version:**
      
        *  Fixed NVRAM CRC error
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p879663226/v155369/D3000_P07231-002.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.04-3.1
changelog:
  -     *The following fix was incorporated in this version:**
      
        *  Fixed NVRAM CRC error
      
      Please refer to the _Release Notes_ for the complete listing of fixes,
      enhancements, known issues and work-arounds corresponding to this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.09-1.1
changelog:
  -     *The following fix is added in this version:**
      
        * Failed to set the power supply fail flag when power supply status was critical
        * General exception message appeared on the console
        * D6020 Disk Enclosure - Segments of node3 & node4 of 6500-6600 Mixed Cluster going into"NotAvailable" or "OnBackup" State
        * Remove SysIndicators references from ESP


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.53
changelog:
  -     *The following fix is added in this version:**
      
        * Enclosure in Unexpected status: Non-critical after restoring the Encl ID.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.72
changelog:
  -     *The following fixes was incorporated in this version:**
      
        * Sensors presence reporting for single domain mode
        * When an IOM is pulled the surviving IOM reports False critical temperatures
        * Configure phy zone group to 0 (zero) for all phys in the initstring
      
      Please refer to the [Release
      Notes](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v148868/D6020_P07232-001.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the [Release
      Notes](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1194926978/v154195/D6020_P07232-002.html) for the complete listing of
      fixes, enhancements, known issues and work-arounds corresponding to this
      firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.74-1.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Temperature sensors logic inside gSEP model and SES database
        * When an IOM is pulled the surviving IOM reports false critical temperatures
      
      Please refer to the Release Notes for the complete listing of fixes,
      enhancements, known issues and work-arounds corresponding to this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.02
changelog:
  -     We now have seperate components to update fibre channel and converged network
      adapters.  This is a fibre channel update component.  
        
      Added support for Red Hat Enterprise Linux 7 operating system.  
        
      Updated 8Gb standup HBA boot image to 5.20x13  
      
        * Added UEFI support
      Updated 8Gb mezz boot image to 6.20x4  
      Updated 16 Gb HBA/Mezz uninversal boot  to 10.2.340.19  
      
        * Added UEFI support
      
      Contains:  
        
      16 Gb HBA/Mezz universal boot 10.2.340.19  
        
      8 Gb Gen8 Mezz (LPe1205A) firmware 2.02X12  
      8 Gb  standup firmware 2.02x13  
      8 Gb Mezz firmware 2.02x13  
      8 Gb HBA boot image 5.20x13 (2.12a14 BIOS, 4.13a14 UEFI)  
      8 Gb Mezz boot image 6.20x4 (3.30a2 BIOS, 4.13a14 UEFI)  
        
      4 Gb HBA/Mezz firmware 2.82x4  
      4 Gb Mezz boot image 6.10a14 (3.30a1 BIOS)  
      4 Gb HBA boot image 5.20a6 (2.12a14 BIOS)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.02
changelog:
  -     *Firmware**  
        
      8Gb Standup  \- 2.02x13
      
        * Corrects a link up/link down recovery issue
        * Resolves Link Down interrupt that wasn't being processed during the Link Up handling
      8Gb Mezzanine - 2.02x12
      
        * Resolves Link Down interrupt that wasn't being processed during the Link Up handling
      8Gb Mezzanine (LPe1205a) - 2.02x13
      
        * Corrects a link up/link down recovery issue
        * Resolves Link Down interrupt that wasn't being processed during the Link Up handling
      16Gb Standup & Mezzanine - 10.2.340.19  
      
        * Resolved firmware download to SN1100E failure with MAL/MILI error issue.
        * Corrected a problem with scanning targets on direct connect configurations.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.01
changelog:
  -     We  have seperate components to update fibre channel and converged network
      adapters.  This is a fibre channel update component.  
        
      Added support for SLES 12  
        
      Updated 16 Gb HBA/Mezz uninversal boot  to 10.2.477.9  
      Updated 8Gb HBA boot image to 5.20x13  
      Updated 8 Gb Mezz boot image to 6.20x4  
      Updated 4 Gb Mezz boot image to 6.20x4  
        
      
      Contains:  
        
      16 Gb HBA/Mezz universal boot 10.2.477.9  
        
      8 Gb Gen8 Mezz (LPe1205A) firmware 2.02X12  
      8 Gb  standup firmware 2.02x13  
      8 Gb Mezz firmware 2.02x13  
      8 Gb HBA boot image 5.20x13 (2.12a14 BIOS, 4.13a14 UEFI)  
      8 Gb Mezz boot image 6.20x4 (3.30a2 BIOS, 4.13a14 UEFI)  
        
      4 Gb HBA/Mezz firmware 2.82x4  
      4 Gb Mezz boot image 6.20x4 (3.30a2 BIOS)  
      4 Gb HBA boot image 5.20a6 (2.12a14 BIOS)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.01
changelog:
  -     *Boot Bios**  
        
      8Gb Standup - 5..20x13
      
        * Resolves an issue where there is a system hang at POST after mapping an HP 82E adapter to a P2000 storage array under Legacy mode.
      8Gb Mezzanine - 6.20x4
      
        * Resolves an issue where there is a system hang at POST after mapping an HP LPe1205/HP LPe1205A adapter to a P2000 storage array under Legacy mode.
        
      4Gb Mezzanine - 6.20x4
      
        * Resolves an issue where Virtual WWN's are still used after changing to default mode in VC-FC.
        
      **Firmware**  
        
      16Gb Standup & Mezzanine - 10.2.477.9  
        
      This firmware resolves the following:
      
        * an issue where the server hung during RHEL6 x64 FCoE boot
        * an issue where the SN1000E adapter becomes unresponsive after updating to version 1.1.65.101 firmware
        * a performance scaling issue in P2P connection in Dual_Port configuration
        * an issue where the SN1000E using direct connect fails to scan targets with its BIOS
        * an issue where not all target ports are displayed on  "scan for devices".


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters.  This is a fibre channel update component.  
        
      Updated 16 Gb HBA/Mezz uninversal boot  to 10.5.65.14  
      Updated 8Gb standup boot bios to 5.21x4  
      Updated 8Gb mezz boot bios to 6.20x10
      
        
      Note: The 8Gb fibre channel version comparison code has been modified to
      compare only numbers.
      
      **Boot Image **
      
      8Gb Standup - 5.21x4
      
      BIOS:
      
        * Added RFT_ID (register FC4 types) and RFF_ID (register FC4 features)
      
      UEFI:
      
        * Added new UEFI Health protocol error codes and messages
        * Add CLP support level
      
      8Gb Mezzanine - 6.20x10
      
      BIOS:
      
        * Added RFT_ID (register FC4 types) and RFF_ID (register FC4 features)
      
      UEFI:
      
        * Added new UEFI Health protocol error codes and messages
        * Add CLP support level
      
      **Firmware**
      
      16Gb Standup & Mezzanine - 10.5.65.14
      
        * Implementation uplift to ASN1 Data Structure Specification
      
      **Contains:**  
        
      16 Gb HBA/Mezz universal boot 10.5.65.14  
        
      8 Gb Gen8 Mezz (LPe1205A) firmware 2.02X12  
      8 Gb  standup firmware 2.02x13  
      8 Gb Mezz firmware 2.02x13  
      8 Gb HBA boot image 5.21x4 (2.20a6 BIOS, 4.20a7 UEFI)  
      8 Gb Mezz boot image 6.20x10 (3.30a10 BIOS, 4.20a7 UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.01
changelog:
  -     *Boot Image**  
        
      8Gb Standup - 5.21x4
      
      BIOS:
      
        * LUN1 is detected as LUN0 if auto-scan setting is set to "First LUN 0" device
        * After firmware/BIOS update system does not SAN-boot any longer
        * Fix "Boot BIOS is Disabled!" message on a clean adapter
        * Only one boot entry in boot menu but two different boot LUNs are configured
        * Elx appears twice in boot menu although only one target is mapped
      
      UEFI:
      
        * Boot from 3par array with RHEL host does not post boot from SAN installation
        * Target connect with HP 82E adapter can't be shown in BIOS if setting Storage Option Rom Policy to UEFI only
        * Fix issue where UEFI Emulex FCoE Scan level functionality was not implemented fully
      
      8Gb Mezzanine - 6.20x10
      
      BIOS:
      
        * LUN1 is detected as LUN0 if auto-scan setting is set to "First LUN 0" device
        * After firmware/BIOS update system does not SAN-boot any longer
        * Fix "Boot BIOS is Disabled!" message on a clean adapter
        * Only one boot entry in boot menu but two different boot LUNs are configured
        * Elx appears twice in boot menu although only one target is mapped
      
      UEFI:
      
        * Boot from 3par array with RHEL host does not post boot from SAN installation
        * Target connect with HP 82E adapter can't be shown in BIOS if setting Storage Option Rom Policy to UEFI only
        * Fix issue where UEFI Emulex FCoE Scan level functionality was not implemented fully
      
      **Firmware**  
        
      16Gb Standup & Mezzanine - 10.5.65.14
      
        * Resolved issue where the WWN's from VC are not being sent to the HBA


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.02
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters.  This is a fibre channel update component.
      
      **Boot Image **
      
      8Gb Standup - 5.21x5
      
      UEFI:
      
        * Implemented HII to disable HP Memory features
      
      8Gb Mezzanine - 6.20x11
      
      UEFI:
      
        * Implemented HII to disable HP Memory features
      
      Updated 16 Gb HBA/Mezz universal boot  to 10.5.160.0  
      Updated 8Gb standup boot bios to 5.21x5  
      Updated 8Gb mezz boot bios to 6.20x11  
        
      Contains:  
        
      16 Gb HBA/Mezz universal boot 10.5.160.0  
        
      8 Gb Gen8 Mezz (LPe1205A) firmware 2.02X12  
      8 Gb  standup firmware 2.02x13  
      8 Gb Mezz firmware 2.02x13  
      8 Gb HBA boot image 5.21x5 (2.20a6 BIOS, 4.20a9 UEFI)  
      8 Gb Mezz boot image 6.20x11 (3.30a10 BIOS, 4.20a9 UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.02
changelog:
  -     *Boot Image**  
        
      8Gb Standup - 5.21x5
      
      UEFI:
      
        * Initialize PrivateData earlier from RegisterSPT so it is ready for Driver Health
      
      8Gb Mezzanine - 6.20x11
      
      BIOS:
      
        * Fix unresponsiveness seen in the configuration utility when a key is pressed
        * Use HII option to disable HP Shared Memory features
      
      UEFI:
      
        * Initialize PrivateData earlier from RegisterSPT so it is ready for Driver Health
      
      **Firmware**  
        
      16Gb Standup & Mezzanine - 10.5.160.0
      
        * Resolved issue where WWN's from VC are not being set on the HBA
        * Resolved issue where the "Boot Path Discovered Targets" Boot Target Scan Method is not working


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.02
changelog:
  -     We have separate components to update Fibre Channel and converged network
      adapters. This is a Fibre Channel update component.
      
      Updated 16 Gb HBA/Mezz universal boot to 10.7.110.31
      
      Updated 8 Gb HBA/Mezz firmware to 2.03x6
      
      Updated 8 Gb standup boot bios to 5.21x6  
      Updated 8 Gb mezz boot bios to 6.20x12
      
      Contains:
      
      16 Gb HBA/Mezz universal boot 10.7.110.31
      
      8 Gb Gen8 Mezz (LPe1205A) firmware 2.03x6  
      8 Gb standup firmware 2.03x6  
      8 Gb Mezz firmware 2.03x6
      
      8 Gb HBA boot image 5.21x6 (2.20a6 BIOS, 4.20a10 UEFI)  
      8 Gb Mezz boot image 6.20x12 (3.30a12 BIOS, 4.20a10 UEFI)
      
      
      
      Changes to 16 Gb firmware:
      
        * Added UEFI v1.2 support
        * Added UEFI HII menu Enable/Disable option for OCSD/OCBB Shared Memory Model


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.02
changelog:
  -     For 8 Gb UEFI:
      
        * Fix for "Login failed" in BIOS scan or add boot device on LPe12002.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.06.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters.  This is a fibre channel update component.
      
      Initial support for the HPE StoreFabric SN1100E 4P 16Gb FC HBA
      
        
      Updated 16 Gb HBA uninversal boot  to 10.7.293.0  
      Updated 8Gb standup boot bios to 5.21x9  
        
      Contains:  
        
      16 Gb HBA universal boot 10.7.293.0  
      8 Gb  standup firmware 2.03x6  
      8 Gb HBA boot image 5.21x9 (2.20a6 BIOS, 4.20a13 UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.06.01
changelog:
  -     8 Gb Standup products
      
      4.20a13 UEFI resolves the following:
      
        * SCAN for target LUN issue, if no LUN is attached, menu will display not supported or not configured
        * Issue where virtual WWN assignment reverts
        * CLP issue where the WWNs are changing between CLP and factory WWNs value on every reboot
      
      16 Gb firmware
      
        * Resolves an issue where HPE Proprietary T10 DIF was enabled on unsupported HBAs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.08.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.  
        
      Updated 16 Gb HBA/Mezz uninversal boot to 10.7.335.0  
      Updated 8Gb standup boot bios to 5.21x10  
      Updated 8Gb mezz boot bios to 6.21x1  
        
      Contains:  
        
      16 Gb HBA/Mezz universal boot 10.7.335.0  
        
      8 Gb Gen8 Mezz (LPe1205A) firmware 2.03X6  
      8 Gb  standup firmware 2.03x6  
      8 Gb Mezz firmware 2.03x6  
      8 Gb HBA boot image 5.21x10 (2.20a6 BIOS, 4.20a15 UEFI)  
      8 Gb Mezz boot image 6.21x1 (3.30a14 BIOS, 4.20a15 UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.08.01
changelog:
  -     8 Gb Standup products
      
      4.20a15 UEFI resolves the following:
      
        * SCAN for target LUN issue, if no LUN is attached, menu will display not supported or not configured
        * Issue where virtual WWN assignment reverts
        * CLP issue where the WWNs are changing between CLP and factory WWNs value on every reboot
      
      8 Gb Mezzanine products
      
      4.20a15 UEFI resolves the following:
      
        * SCAN for target LUN issue, if no LUN is attached, menu will display not supported or not configured
        * Issue where virtual WWN assignment reverts
        * CLP issue where the WWNs are changing between CLP and factory WWNs value on every reboot
      
      16 Gb firmware
      
        * Resolves an issue where HPE Proprietary T10 DIF was enabled on unsupported HBAs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.  
        
      Updated 16 Gb HBA/Mezz uninversal boot  
      Updated 8Gb standup boot bios  
      Updated 8Gb mezz boot bios
      
      **Firmware**
      
      16GB standup/mezz
      
        * Uplifted for HPE UEFI specification v1.4
      
        
      Contains:  
        
      16 Gb HBA/Mezz universal boot 11.1.183.21  
        
      8 Gb standup/mezz firmware 2.03X6
      
      8 Gb standup universal boot image 5.21x10 (2.20a6 BIOS, 4.20a15 UEFI)
      
      8 Gb mezzanine universal boot image 6.21x1 (3.30a14 BIOS, 4.20a15 UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.04
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.  
        
      Updated 16Gb HBA/Mezz uninversal boot
      
      Contains:  
        
      16 Gb HBA/Mezz universal boot 11.1.183.58  
        
      8 Gb standup/mezz firmware 2.03X6
      
      8 Gb standup universal boot image 5.21x11 (2.20a7 BIOS, 4.20a15 UEFI)
      
      8 Gb mezzanine universal boot image 6.21x1 (3.30a14 BIOS, 4.20a15 UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.04
changelog:
  -     This fix resolves an issue in which 16Gb HBAs were unable to login when
      connected directly to a target port on 3PAR arrays


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.01
changelog:
  -     Added support for following:
      
          HPE UEFI 2.0  
          Ability to notify user that OneView is already in control of the adapter
      when OneCommand Manager(OCM) is loaded  
          Uplifted for HPE UEFI specification v1.4 on 8Gb HBA BIOS  
          Platform Management Components Intercommunication(PMCI) v1.1.0 Spec  
          Boot from a 4k sector Native disk
      
      Updated 16/32 Gb HBA/Mezz universal boot  
      Updated 16Gb  HBA/Mezz universal boot  
      Updated 8Gb  HBA/Mezz universal boot
      
      **Contains:**
      
      16/32 Gb HBA/Mezz universal boot 11.2.254.12
      
      16 Gb HBA/Mezz universal boot 11.2.254.12
      
      8 Gb standup/mezz firmware 2.03x14
      
      8 Gb standup/mezz universal boot image 11.20a7 (11.2.241.0 BIOS, 11.2.283.0
      UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.01
changelog:
  -     Resolves the following:
      
          Boot From SAN (BFS) does not see the LUN as a bootable logical drive on
      8Gb HBA  
          HPE SN1600E 32Gb 2p FC HBAs gets into incomplete state on HPE Proliant
      Gen 9 DL560 server  
          ACCESS_VDATA property exists even after disabling the XROM BIOS


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.02
changelog:
  -     Updated 16/32 Gb HBA/Mezz universal boot  
      Updated 16Gb  HBA/Mezz universal boot
      
      **Contains:**
      
      16/32 Gb HBA/Mezz universal boot 11.2.254.15
      
      16 Gb HBA/Mezz universal boot 11.2.254.14
      
      8 Gb standup/mezz firmware 2.03x14
      
      8 Gb standup/mezz universal boot image 11.20a7 (11.2.241.0 BIOS, 11.2.283.0
      UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.02
changelog:
  -     Resolves the following:
      
           HPE Synergy 3530C 16Gb Fibre Channel Host Bus Adapter inlet temperatures
      were only being displayed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.09.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.  
        
      Updated 16 Gb HBA/Mezz universal boot.  
      Updated 32 Gb HBA universal boot  
      Updated 8Gb HBA/Mezz boot bios.  
        
      Contains:  
        
      16 Gb HBA/Mezz universal boot 11.2.307.16  
      16/32 Gb HBA universal boot 11.2.307.16  
        
      8 Gb Gen8 Mezz (LPe1205A) firmware 2.03X14  
      8 Gb  standup firmware 2.03x14  
      8 Gb Mezz firmware 2.03x14  
      8 Gb HBA/Mezz boot image 11.20A7 (11.2.241.0 BIOS, 11.2.283.0 UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.09.01
changelog:
  -     8G Firmware:
      
      Fixed the following:
      
        * Link down encountered during high traffic on 81E, 82E, 84E, LPe1205a
      
      UEFI:
      
        * Boot Device Order menu not displaying targets on HPE servers
      
      
      
      16G Firmware:
      
      Fixed the following:
      
        * Incorrect adapter showed up in PCI slot 1 in Dashboard and Static Networking
      
      
      
      16G/32G Firmware:
      
      Fixed the following:
      
        * Incorrect adapter showed up in PCI slot 1 in Dashboard and Static Networking


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.02.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.
      
      Added support to the following:
      
      8G Standup and Mezzanine:
      
      BIOS:
      
        * Add support for Direct attach Point to Point
      
      16 Gb Standup, 16 Gb Mezzanine & 32G Standup:
      
      UEFI:
      
        * V2.40 Unified Extensible Firmware Interface (UEFI) driver support for HP Servers
      
      BIOS/Firmware:
      
        * Enable Buffer to Buffer credit (BB_credit) recovery using the Fibre Channel (FC) primitives
        * Platform Level Data Model (PLDM)/Management Component Transport Protocol (MCTP) Standard Firmware Download
        * Support for Bi-Directional D-port & Clearlink
        * Security Enhancements
      
      Updated 16/32 Gb HBA/Mezz universal boot  
      Updated 16Gb  HBA/Mezz universal boot  
      Updated 8Gb  HBA/Mezz universal boot
      
      **Contains:**
      
      16/32 Gb HBA/Mezz universal boot 11.4.225.21  
      16 Gb HBA/Mezz universal boot 11.4.225.21
      
      8 Gb standup/mezz firmware 2.03x14
      
      8 Gb standup/mezz universal boot image 11.40a9 (11.4.231.0 BIOS, 11.4.260.0
      UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.06.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.
      
      Added support to the following:
      
      8G Standup and Mezzanine:
      
      BIOS:
      
        * Fabric assigned Boot Target/Logical Unit (LUN) to Fabric Assgined World Wide Name(FAWWN)
      
      Updated 16/32 Gb HBA/Mezz universal boot  
      Updated 16Gb  HBA/Mezz universal boot  
      Updated 8Gb  HBA/Mezz universal boot
      
      **Contains:**
      
      16/32 Gb HBA/Mezz universal boot 11.4.334.10  
      16 Gb HBA/Mezz universal boot 11.4.334.11
      
      8 Gb standup/mezz firmware 2.10X6
      
      8 Gb standup/mezz universal boot image 11.40a13 (11.4.305.0 BIOS, 11.4.344.0
      UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.09.01
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.
      
      Added support to the following:
      
      8G Standup and Mezzanine:
      
      BIOS:
      
        * Fabric assigned Boot Target/Logical Unit (LUN) to Fabric Assgined World Wide Name(FAWWN)
      
      Updated 16/32 Gb HBA/Mezz universal boot  
      Updated 16Gb  HBA/Mezz universal boot  
      Updated 8Gb  HBA/Mezz universal boot
      
      **Contains:**
      
      16/32 Gb HBA/Mezz universal boot 11.4.334.10  
      16 Gb HBA/Mezz universal boot 11.4.334.27
      
      8 Gb standup/mezz firmware 2.10X6
      
      8 Gb standup/mezz universal boot image 11.40a13 (11.4.305.0 BIOS, 11.4.344.0
      UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.09.02
changelog:
  -     We  have separate components to update fibre channel and converged network
      adapters. This is a fibre channel update component.
      
      Added support to the following:
      
      8G Standup and Mezzanine:
      
      BIOS:
      
        * Fabric assigned Boot Target/Logical Unit (LUN) to Fabric Assgined World Wide Name(FAWWN)
      
      Updated 16/32 Gb HBA/Mezz universal boot  
      Updated 16Gb  HBA/Mezz universal boot  
      Updated 8Gb  HBA/Mezz universal boot
      
      **Contains:**
      
      16/32 Gb HBA/Mezz universal boot 11.4.334.10  
      16 Gb HBA/Mezz universal boot 11.4.334.31
      
      8 Gb standup/mezz firmware 2.10X6
      
      8 Gb standup/mezz universal boot image 11.40a13 (11.4.305.0 BIOS, 11.4.344.0
      UEFI)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.09.02
changelog:
  -     Fixed the following:
      
        * Fixed an issue where OneView profile data is lost during firmware upgrades from versions earlier than 11.4.x.x


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.09.03
changelog:
  -     Fixed the following:
      
        * Entries in payload.json which was triggering firmware discovery and flash to be incomplete on HPE SN1200E 16Gb 1port/2port adapter when firmware flash was attempted via OneView, integrated Lights Out(iLO) and UEFI flash mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2008.07.25
changelog:
  -     o Added support for AK344A single port 8Gb/s fibre channel host bus adapter
      
      o Added support for AJ764A dual port 8Gb/s fibre channel host bus adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2008.07.25
changelog:
  -     o Updated newly generated Configuration file (.xml)  
      o Changed bios_item back to fw_item in discovery xml file


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2008.10.24
changelog:
  -      Fix boot bios upgrade issue on QLogic fibre channel mezzanine cards in ProLiant bl20p G2 and G3 servers. 
        * Change boot bios version for QMH2462 to 1.26 
        * Fix issue where component was reporting some boot BIOS versions as "0"


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2009.10.07
changelog:
  -      Added version 2.12 of the QLogic BIOS for all 4 Gb/s and 8 Gb/s HP QLogic fibre channel host bus adapters


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2010.03.17
changelog:
  -      Made smart component compatible with inbox driver that comes with SUSE Linux Enterprise Server 11.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2010.05.19
changelog:
  -      Added updated 4 Gb Multi-boot image, version 1.89AF (BIOS 2.15, EFI 2.20) 
        * Added updated 8 Gb Multi-boot image, version 2.27AF (BIOS 2.15, EFI 2.20)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2012.02.01
changelog:
  -      Added support for QMH2572 8 Gb FC Mezz   
        * Added QMH2572 firmware/BIOS package 2.50AF  
            Firmware 5.06.50  
            BIOS 3.08


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2012.05.01
changelog:
  -      Added new firmware/BIOS packages
        
      
        * 4 Gb HBA/Mezz cards, 1.99AF 
          * Firmware 5.03.15
          * BIOS 3.08
        * 8 Gb HBA/Mezz cards, 2.52AF 
          * Firmware 5.03.15
          * BIOS 3.08
        * QMH2572 8 Gb FC Mezz, 2.51AF 
          * Firmware 5.06.04
          * BIOS 3.08


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2012.08.01
changelog:
  -     Updated firmware/BIOS packages for Fibre Channel options supported by this
      component:  
      
        * 4 Gb HBA/Mezz cards, 2.01AF 
          * Firmware 5.03.15
          * BIOS 3.12
        * 8 Gb HBA/Mezz cards, 2.55AF 
          * Firmware 5.03.15
          * BIOS 3.12
        * QMH2572 8 Gb FC Mezz, 2.56AF 
          * Firmware 5.06.04
          * BIOS 3.12


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2012.08.01
changelog:
  -     Added code to handle a possible failed LUN condition due to an invalid drive
      geometry reported to the system.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2012.10.01
changelog:
  -      Added new firmware/BIOS packages
        
      
        * 4 Gb HBA/Mezz cards, 2.03AF 
          * Firmware 5.03.15
          * BIOS 3.13
        * 8 Gb HBA/Mezz cards, 2.58AF 
          * Firmware 5.03.15
          * BIOS 3.13
        * QMH2572 8 Gb FC Mezz, 2.59AF 
          * Firmware 5.06.04
          * BIOS 3.13


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2013.02.01
changelog:
  -      Added new firmware/BIOS packages
        
      
        * SN1000Q, 2.01.10 
          * Firmware 6.02.00
          * BIOS 3.18


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2013.02.01
changelog:
  -     SN1000Q BIOS changes from 3.14 to 3.18:  
      
      
        * Added code to check/program Feature Config checksum.  
        * Fix bug that could cause buffer overrun in CTRL-Q with Report Lun command               
        * Changed code to use 32 bit pointer to allocate/deallocate EBDA memory.
        * Added code to check/program Feature Config checksum.
        * Fixed Lun select & display issues with CTRL-Q


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2013.08.01
changelog:
  -      Added new firmware/BIOS packages for 8 Gb and 16 Gb products:
        
      
        * 8 Gb HBA/Mezz 
          * Package 2.65A1
          * Firmware 5.09.00
          * BIOS 3.13
          * UEFI 6.15  
      
      
        * SN1000Q/QMH2672 
          * Package 2.02.47
          * Firmware 6.07.02
          * BIOS 3.21 
            * Now checks for invalid LUN in CTRL-Q scan devices. 
            * Check for 4G flag in NVRAM for FC. 
          * UEFI 6.13  
      
      
        * QMH2572 8 Gb FC Mezz 
          * Package 2.59AF
          * Firmware 5.06.04
          * BIOS 3.13  
      
      
        * 4 Gb HBA/Mezz 
          * Package 2.03AF
          * Firmware 5.03.15
          * BIOS 3.13


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2013.08.01
changelog:
  -     SN1000Q BIOS fixes:
      
        * Fixed issue in CTRL_Q utility that might cause some cosmetic display issues.
        * Fixed issue with CTRL-Q Loopback Utility.
      
      SN1000Q FW fixes:
      
        * Intermittent link failures that occurred after a cable pull.
        * Firmware failed to detect port id change after Fabric login timeout.
        * Performance scaling issues on multiple 4G tape devices.
        * Resolved a low write performance (throughput) issue seen when running single  
      threaded IOs to multiple slower targets.
      
        * If the disable VP command was received while an ELS PassThru exchange was active  
      for VP being disabled this caused a firmware buffer pool corruption and the  
      firmware stopped responding.
      
        * A possible command iocb timeout occurred if the driver provided an invalid response  
      queue reference.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.02.01
changelog:
  -      Added UEFI driver for 8 Gb and 16 Gb products (except QMH2572).  
        
      This component contains:  
      
      
        * 4 Gb HBA/Mezz 
          * Package 2.03AF
          * Firmware 5.03.15
          * BIOS 3.13  
      
      
        * 8 Gb HBA/Mezz 
          * Package 3.60A2
          * Firmware 5.09.00
          * BIOS 3.13
          * UEFI 6.23  
      
      
        * 16 Gb HBA/Mezz 
          * Package 3.90.01
          * Firmware 6.07.02
          * BIOS 3.21 
          * UEFI 6.20  
      
      
        * QMH2572 8 Gb FC Mezz 
          * Package 2.59AF
          * Firmware 5.06.04
          * BIOS 3.13


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.04.01
changelog:
  -      Updated the firmware/BIOS packages for 8 Gb and 16 Gb products.
        
        
      
        * 4 Gb HBA/Mezz 
          * Package 2.03AF
          * Firmware 5.03.15
          * BIOS 3.13  
      
      
        * QMH2572 Mezz Card 
          * Package 2.59AF
          * Firmware 5.06.04
          * BIOS 3.13  
      
      
        * 8 Gb HBA/Mezz 
          * Enabled legacy BIOS boot
          * Enabled secure boot
        
        
      
          * Package 3.60A4
          * Firmware 5.09.00
          * BIOS 3.13
          * UEFI 6.28  
      
      
        * 16 Gb HBA/Mezz 
          * Enabled legacy BIOS boot
          * Enabled secure boot
        
        
      
          * Package 3.90.02
          * Firmware 6.07.02
          * BIOS 3.21
          * UEFI 6.25


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.01
changelog:
  -     Updated the firmware/BIOS/EFI packages for 8 Gb and 16 Gb products.
      
        * 4 Gb HBA/Mezz 
          * Package 2.03AF
          * Firmware 5.03.15
          * BIOS 3.13
        * 8 Gb HBA/Mezz 
          * Package 3.71.01 (Binary 371A1)
          * Firmware 7.03.00
          * BIOS 3.24
          * UEFI 6.32
        * 16 Gb HBA/Mezz 
          * Package 4.00.12
          * Firmware 7.03.01
          * BIOS 3.24
          * UEFI 6.29


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2014.09.01
changelog:
  -     8 Gb Products  
        
      BIOS  
      
        * Fixed bug in displaying selectable boot lun
        * Fixed issue with not restoring defaults on port 1
        * Fixed bug that could cause buffer overrun in CTRL-Q with Report Lun command
        * Added additional time to login target when called  after EFI driver unloads.    
        * Added code to handle boot LUN Greater than 255.
        * Added code to display message when 64 bit address is detected. 
      uEFI  
        * Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
        * Fixed drive mapping issues on CLP enabled servers. 
      
        
      16 Gb Products  
           
      BIOS
      
        * Added additional time to login target when called after EFI driver unloads.    
        * Added code to handle boot LUN Greater than 255.
        * Added code to display message when 64 bit address is detected. 
      uEFI  
      
        * Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
        * Fixed drive mapping issues on CLP enabled servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.01
changelog:
  -     Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.
      
        * 4 Gb HBA/Mezz 
          * Package 2.03AF
          * Firmware 5.03.15
          * BIOS 3.13  
      
      
        * 8 Gb HBA/Mezz 
          * Package 3.71.09 (Binary 371A9)
          * Firmware 7.04.00
          * UEFI 6.35
          * BIOS 3.28 
            * BIOS Enhancements:
            * Added support for fabric assigned BOOT LUN 
            * Added support for show port clp
            * Added code to not configure any targets when fabric assign Boot
            * Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
            * Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN  
      
      
        * 16 Gb HBA/Mezz 
          * Package 4.00.19
          * Firmware 7.04.00
          * UEFI 6.31
          * BIOS 3.28 
            * BIOS Enhancements:
            * Added support for fabric assigned BOOT LUN
            * Added support for show port clp
            * Added code to not configure any targets when fabric assign Boot
            * Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
            * Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.01
changelog:
  -     8 Gb Products  
        
      BIOS  
      
        * Changed VLAN ID max value from 4095 to 4094
        * Changed CTRL-Q to allow max value for Login Retry
      UEFI  
        * Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs
        * Fixed drive mapping issues on CLP enabled servers
      
        
      16 Gb Products  
           
      BIOS
      
        * Fixed LUN enabled but fabric assigned BOOT LUN not found
        * Changed CTRL-Q to allow max value for Login Retry
      UEFI  
      
        *  Fixed memory leak issue when driver exits due to NVRAM error


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.02.02
changelog:
  -     Updated the Firmware/BIOS/UEFI package for 8 Gb products.
      
        * 4 Gb HBA/Mezz 
          * Package 2.03AF
          * Firmware 5.03.15
          * BIOS 3.13  
      
      
        * 8 Gb HBA/Mezz 
          * Package 3.72.03 (Binary 372A3)
          * Firmware 7.04.00
          * UEFI 6.36
          * BIOS 3.28  
      
      
        * 16 Gb HBA/Mezz 
          * Package 4.00.19
          * Firmware 7.04.00
          * UEFI 6.31
          * BIOS 3.28


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.01
changelog:
  -     Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.72.03 (Binary 372A3)
          * Firmware 7.04.00
          * UEFI 6.36
          * BIOS 3.28  
      
      
        * 16 Gb HBA/Mezz 
          * Package 5.00.12
          * Firmware 8.00.40
          * UEFI 6.31
          * BIOS 3.28


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.06.01
changelog:
  -      For 8 Gb UEFI 
          * Fixed a driver load error when the Adapter Disable NVRAM bit was set.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.01
changelog:
  -     Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.73.05 (Binary 373A5)
          * Firmware 8.01.02
          * UEFI 6.42
          * BIOS 3.31  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.00.14
          * Firmware 8.01.42
          * UEFI 6.37
          * BIOS 3.31


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2015.10.01
changelog:
  -     *8Gb Standup & 8Gb Mezzanine**
      
          BIOS
      
        * Maintenance updates
      
          UEFI
      
        * Fixed OCBB bug that caused DMA errors during Linux boot
        * HII WWN Database menu allows the user to pick from a list of targets and LUNs
        * Fixed Windows Server 2012 boot issue on target storage array
        * Fixed OCSD checksum error on certain HP blade servers.  Added PCI bus and device information to the firmware OCSD structure
      
      **16Gb Standup & 16Gb Mezzanine**
      
          BIOS
      
        * Maintenance updates
      
          UEFI
      
        * Fixed OCBB bug that caused DMA errors during Linux boot
        * HII WWN Database menu allows the user to pick from a list of targets and LUNs
        * Fixed Windows Server 2012 boot issue on target storage array
        * Fixed OCSD checksum error on certain HP blade servers.  Added PCI bus and device information to the firmware OCSD structure
        * Fixed OCBB polling error on servers
        * Fixed memory leak issue when driver exits due to NVRAM error
        * Fixed driver mapping issues on CLP enabled servers


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.01
changelog:
  -     Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.75.03 (Binary 375A3)
          * Firmware 8.02.00
          * UEFI 6.42
          * BIOS 3.31  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.01.00
          * Firmware 8.02.00
          * UEFI 6.37
          * BIOS 3.31


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.02.01
changelog:
  -     16 Gb firmware
      
      Fixed reporting asynchronous events related to link transitions via the ATIO
      queue with the "Enable Asynchronous Event to Immediate Notify IOCB" option.
      
      Fixed firmware system error (8002h) that occurred during target mode cleanup.
      
      Fixed firmware system error that occurred during target mode cleanup with the
      presence of outstanding REC exchanges associated with SCSI exchanges.
      
      Fixed login collision that occurred in private loop topology.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.04.01
changelog:
  -     Add support for the following devices:
      
        * HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
        * HPE StoreFabric SN1100Q 16Gb 2P FC HBA
        * HPE StoreFabric SN1100Q 16Gb 1P FC HBA
        * HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter
      
      Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.75.05
          * Firmware 8.02.00
          * UEFI 6.43
          * BIOS 3.31  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.01.05
          * Firmware 8.02.00
          * UEFI 6.38
          * BIOS 3.31  
      
      
        * 16 Gb SN1100Q 
          * Package 01.70.15
          * Firmware 8.03.05
          * UEFI 6.19
          * BIOS 3.37


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.10.01
changelog:
  -     Add support for the following devices:
      
        * HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
        * HPE StoreFabric SN1100Q 16Gb 2P FC HBA
        * HPE StoreFabric SN1100Q 16Gb 1P FC HBA
        * HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter
      
      Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.75.07
          * Firmware 8.02.00
          * UEFI 6.45
          * BIOS 3.31  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.01.14
          * Firmware 8.02.51
          * UEFI 6.39
          * BIOS 3.31  
      
      
        * 16 Gb SN1100Q 
          * Package 01.70.17
          * Firmware 8.03.05
          * UEFI 6.19
          * BIOS 3.37


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.09.01
changelog:
  -     Add support for SN1600Q.
      
      Updated the Firmware/BIOS/UEFI packages for 32 Gb products.
      
        * 32 Gb HBA SN1600Q 
          * Package 01.70.24
          * Firmware 8.03.10
          * UEFI 6.22
          * BIOS 3.37


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2016.12.01
changelog:
  -     Added support for the following devices:
      
        * HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
        * HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.
      
        * 8 Gb HBA 
          * Package 3.75.07
          * Firmware 8.02.00
          * UEFI 6.45
          * BIOS 3.31  
      
      
        * 16 Gb HBA 
          * Package 6.01.14
          * Firmware 8.02.51
          * UEFI 6.39
          * BIOS 3.31  
      
      
        * 16/32 Gb SN1100Q/SN1600Q 
          * Package 01.70.27
          * Firmware 8.03.10
          * UEFI 6.24
          * BIOS 3.37


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.01
changelog:
  -     *16Gb Standup & 16Gb Mezzanine**
      
      BIOS
      
        * Added POST Discovery Mode functionality
      
      UEFI
      
        * Added POST Discovery Mode functionality
      
        * Added Scan Fibre Devices HII field
      
      **32Gb Standup & 16Gb Mezzanine**
      
      BIOS
      
        * Added POST Discovery Mode functionality
      
      UEFI
      
        * Added POST Discovery Mode functionality
      
      Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.76.05
          * Firmware 8.05.00
          * UEFI 6.52
          * BIOS 3.31  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.01.36
          * Firmware 8.05.60
          * UEFI 6.53
          * BIOS 3.43  
      
      
        * 16/32 Gb 
          * Package 01.70.47
          * Firmware 8.05.60
          * UEFI 6.34
          * BIOS 3.54


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.06.01
changelog:
  -     *8Gb Standup & 8Gb Mezzanine**
      
      BIOS
      
        * Maintenance updates
      
      UEFI
      
        * Fixed unexpected behavior during Win2012 boot on 3PAR storage array
      
      
      
      **16Gb Standup & 16Gb Mezzanine**
      
      BIOS
      
        * Added code to allow direct connected LUN to be configured when FA_BLUN is enabled.
      
        * Fixed unexpected behavior in check_mem64 routine where pci address was not setup correctly.
      
        * Fixed bug that caused FlexAddress to stop
      
      UEFI
      
        * Fixed HII Load Defaults issue onHP QMH2672 16Gb Fibre Channel Host Bus Adapter . HII Load defaults no longer adds items to the Adapter Settings menu
      
        * Fixed unexpected behavior during Win2012 boot on 3PAR storage array


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.09.01
changelog:
  -     Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.76.06
          * Firmware 8.05.00
          * UEFI 6.52
          * BIOS 3.56  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.01.41
          * Firmware 8.05.63
          * UEFI 6.54
          * BIOS 3.43  
      
      
        * 16/32 Gb 
          * Package 01.70.51
          * Firmware 8.05.61
          * UEFI 6.36
          * BIOS 3.54


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2017.09.01
changelog:
  -     8Gb Standup & 8Gb Mezzanine
      
      BIOS
      
        * Incorrect processing of Command Line Processor (CLP)  'set netport'
        * Improper display of Command Line Processor (CLP) Logical Unit Number (LUN)
      
      UEFI
      
        * Changed Operation Mode Human Interface Infrastructure (HII) strings. The new strings match the FastUTIL strings.
        * Self-certification Test (SCT) 2.4B BlockIO2 Protocol bug.
        * No response during Self-certification Test (SCT) 2.4B BlockIO2 Protocol test.
        * Self-certification Test (SCT) 2.4B AdapterInfo Protocol bugs.
      
      
      
      16Gb Standup & 16Gb Mezzanine
      
      UEFI
      
        * Adapter not appearing in Health Summary page.
        * Invalid Health message when link was down or driver was disabled.
        * Adapter connection mode to change (OS install related) when the Human Interface Infrastructure (HII) Link Speed field changed.
      
      
      
      32Gb Standup & 16Gb Mezzanine
      
      UEFI
      
        * Adapter not appearing in Health Summary page.
        * Invalid Health message when link was down or driver was disabled.
        * Added code to start operational firmware early.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.02.01
changelog:
  -     Added support for the following:
      
      **8Gb Standup & 8Gb Mezzanine**
      
        * Additional "show Command Line Processor (CLP's)".
        * Gen10 Driver Health error codes.
      
      **16Gb Standup & 16Gb Mezzanine**
      
        * Gen10 Driver Health error codes
        * OEMHP_TargetBootPaths Command Line Processor (CLP) command.
      
      **16Gb/32Gb Standup **
      
        * Gen10 Driver Health error codes.
        * OEMHP_TargetBootPaths Command Line Processor (CLP) command.
        * Semaphore checks before flash reads and writes
      
      Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.77.03
          * Firmware 8.05.00
          * UEFI 6.59
          * BIOS 3.56  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.01.50
          * Firmware 8.05.64
          * UEFI 6.58
          * BIOS 3.43  
      
      
        * 16/32 Gb 
          * Package 01.70.66
          * Firmware 8.05.65
          * UEFI 6.41
          * BIOS 3.54


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.02.01
changelog:
  -     Fixed the following:
      
      **8Gb Standup & 8Gb Mezzanine**
      
      BIOS
      
        *  CTRL-Q cosmetic unexpected behavior
      
      UEFI
      
        *  Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete.
        *  Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Force Fast Discovery
        *  Human Interface Infrastructure (HII) save unexpected behavior on Superdome servers. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non  Volatile Random Access Memory (NVRAM)
        *  Unexpected behavior which caused adapter to not appear on the Health Summary page.
        *  Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Auto
        *  World Login unexpected behavior when Power On Self -Test (POST) Discovery Mode was set to Auto
      
      
      
      **16Gb Standup & 16Gb Mezzanine**
      
      UEFI
      
        *  Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete
      
      
      
      **16Gb/32Gb Standup**
      
      UEFI
      
        *  Human Interface Infrastructure (HII) save unexpected behavior. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non Volatile Random Access Memory (NVRAM).
        *  Corrected adapter name format in Read Only Memory (ROM) Based Setup-Utility (RBSU) menus.
        *  Unexpected behavior that caused Non Volatile Random Access Memory (NVRAM) overwritten after Human Interface Infrastructure (HII) changes
        *  Behavior that caused Human Interface Infrastructure (HII) fields to not revert back to original settings when ESC key was used to discard changes


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.06.01
changelog:
  -     Added support for the following:
      
      **16Gb Standup & 16Gb Mezzanine**
      
        * Power Loss calculation in D_port (Destination port) operation.
      
      **16Gb/32Gb Standup **
      
        * Power Loss calculation in D_port (Destination port) operation.
        * Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.
      
      Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.
      
        * 8 Gb HBA/Mezz 
          * Package 3.77.08
          * Firmware 8.07.00
          * UEFI 6.64
          * BIOS 3.56  
      
      
        * 16 Gb HBA/Mezz 
          * Package 6.01.59
          * Firmware 8.07.16
          * UEFI 6.63
          * BIOS 3.43  
      
      
        * 16/32 Gb 
          * Package 01.70.85
          * Firmware 8.07.18
          * UEFI 6.47
          * BIOS 3.54


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2018.06.01
changelog:
  -     Fixed the following
      
      **8Gb Standup & 8Gb Mezzanine**
      
      UEFI
      
        * Firmware Management Protocol now supports flashing older Multiboot versions.
        * Firmware Management Protocol SetImage no longer displays dots on the screen.
        * The following HII (Human Interface Infrastructure) fields now require a reboot after value change:  
      Legacy BIOS (Basic Input Output System) Selectable Boot
      
      
      
      **16Gb Standup & 16Gb Mezzanine**
      
      Firmware
      
        * Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
        * Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).
      
      UEFI
      
        * Firmware Management Protocol now supports flashing older Multiboot versions.
        * Firmware Management Protocol SetImage no longer displays dots on the screen.
        * The following HII (Human Interface Infrastructure) fields now require a reboot after value change:  
      Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit
      (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.
      
      
      
      **16Gb/32Gb Standup**
      
      Firmware
      
        * Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
      
      UEFI
      
        * Firmware Management Protocol now supports flashing older Multiboot versions.
        * Firmware Management Protocol SetImage no longer displays dots on the screen.
        * The following HII (Human Interface Infrastructure)  fields now require a reboot after value change:  
      FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric
      Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System)
      Selectable Boot.
      
        * Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.01
changelog:
  -     Initial Release with the following features:  
        
       iLO 4 supports HP Active Health System, HP's always-on diagnostic capability
      that is new for Gen8 HP ProLiant servers  
       iLO 4 supports HP Agentless Management for out-of-the box SNMP-based server
      management that does not require OS-based Agents  
       iLO 4 supports the new, built-in Intelligent Provisioning capability for easy
      server setup which is new for Gen8 HP ProLiant servers  
       iLO 4 supports up to 1Gbit dedicated LAN access on Gen8 HP ProLiant ML/DL/SL
      servers


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.05
changelog:
  -     \- The iLO SNMP interface will react to excessive activity to SNMP Network
      port 161 to prevent "Denial of Service" type attacks  
      \- When the Agentless Management Service (AMS) is installed on the host
      operating system, the iLO "Server Name" will be updated. This overwrites the
      information entered in the iLO GUI (same behavior in iLO 3 under Windows)  
      \- The HP SmartMemory Technology is better displayed on the System Information
      Memory page  
      \- There is support for iLO 4 monitoring larger, internally attached storage
      enclosures  
      \- When the Agentless Management Service (AMS) is installed on the host
      operating system, the host Network Link status will be displayed, even if
      "SNMP Pass-thru" is enabled  
      \- NIC Link Status:  The host OS "network LINK" status will be better
      reflected in the iLO GUI. If no cable is connected to the port AND the NIC is
      disabled by the HOST, the GUI will show "Informational" rather than "Link
      Down"  
      \- When the Agentless Management Service (AMS) is installed on the host Linux
      operating system, events logged to the Integrated Management Log (IML) are
      also logged to the Linux "messages" file


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.05
changelog:
  -     \- Feature not supported message was not displayed for all tags for some xml
      scripts  
      \- User could not set MIN_PASSWORD to zero (0) using a RIBCL script  
      \- Could not import SSH key via RIBCL if the key is for the Administrator
      account  
      \- Unable to restore the captured file from HPONCFG on Blade Servers  
      \- Incorrect error message when SSH Port was left blank in HPONCFG or XML
      scripts  
      \- IRC session gets disconnected after a minute after booting into the server
      OS  
      \- Possible mismatch representation between ILO CLI and GUI network gateway
      setting  
      \- Physical DVD on HP BladeSystem c3000 Enclosure might fail to mount
      correctly via Scriptable VM  
      \- No event was logged when SSH Key was deleted


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.10
changelog:
  -      Support for HP Insight Remote Support 7.0 and later.  
      
      
        * Support for Location Discovery Services (ML and DL servers only).  
      
      
        * Support for configurable Remote Console hot keys.  
      
      
        * Integrated Management Log enhancements (iLO web interface): 
          * Added the ability to change the status of Critical or Caution events to Repaired.  
      
      
          * Added the ability to add a Maintenance Note to the IML log.  
      
      
          * Added logging for some Smart Array storage events.  
      
      
        * Added a customizable login security banner.  
      
      
        * Added more defined SNMP traps related to the server power state.  
      
      
        * Changed the handling of cache modules in order to not report an error for normal conditions such as cache recharging or logical drive expansion.  
      
      
        * Improved iLO Event Log message when non-iLO firmware is flashed.  
      
      
        * Added CLI performance improvements.  
      
      
        * Added CLI support for adding and removing SSH keys.  
      
      
        * Added manual_ilo_reset to the CLI, which allows network changes without an immediate reset.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.10
changelog:
  -      Fixed issue in which fan speed/airflow impedance occurs in certain situations.  
      
      
        * Updated the Factory_Defaults.xml script to include clearing the iLO and IML logs.  
      
      
        * Fixed an issue in which the server would auto power-on unexpectedly when iLO defaults were set using RIBCL.  
      
      
        * The iLO web interface and XML now show N/A for Total Memory Size, Operating Frequency, and Operating Voltage for empty processor sockets.  
      
      
        * Updated SET_HOST_APO.XML to use iLO user permissions.  
      
      
        * Changes to boot order in the iLO web interface and XML scripts now require the Virtual Power and Reset permission.  
      
      
        * Fixed Get_All_Languages.xml to work with CPQLOCFG.  
      
      
        * Fixed an issue where the iLO web interface displays the wrong message for an invalid SID.  
      
      
        * Fixed an issue where Clear_AHS_Data.xml will not execute successfully when AHS is disabled through the iLO web interface.  
      
      
        * The iLO Event Log now logs the name of the user that ran Clear_AHS_Data.XML.  
      
      
        * Fixed the Clear_AHS_Data.xml informational message.  
      
      
        * Removed unrelated VSP messages when running Mod_VSP_Flow_Control.  
      
      
        * Fixed the Set_Server_Name.xml log entry in the iLO Event Log.  
      
      
        * Fixed synchronization issues with the Power Regulator Values in iLO web interface and XML scripts.  
      
      
        * Fixed Get_Network.XML to display correct network information when the iLO 4 configured link is set to Auto.  
      
      
        * Fixed invalid XML response for Get_All_Languages.xml and Get_Language.xml.  
      
      
        * Fixed the Get_EmHealth.xml Storage Controller label.  
      
      
        * Fixed the IRC playback video when the server is powered off.  
      
      
        * Fixed IRC intermittent hang when un-mounting virtual media during a server reboot.  
      
      
        * Fixed the issue that caused an SSH session to disconnect when the IRC Trust Setting is changed.  
      
      
        * Fixed an issue that caused the .NET IRC to prompt for user credentials when started from the iLO web interface.  
      
      
        * Fixed an issue that caused the numeric keypad  to work incorrectly in some situations.  
      
      
        * Fixed intermittent Unknown status for System Health, Server Power and UID in the iLO web interface Overview page.  
      
      
        * Fixed an issue that caused a DHCP supplied time zone not to be applied to the time iLO obtained from an SNTP server.  
      
      
        * Fixed a temporary loss of communication with Smart Array firmware which could lead to iLO noting a critical storage condition.  
      For more information, see the CA: [http://h20000.www2.hp.com/bizsupport/TechSu
      pport/Document.jsp?locale=en_US&objectID=c03384383](http://h20000.www2.hp.com/
      bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c03384383).  
      
      
        * Fixed an issue in which the server remains to be powered off when issuing a shutdown command (f12 > F2) using ESXi 5.0 U1.  
      
      
        * Fixed intermittent communication issues between iLO and a Smart Array Controller.  
      
      
        * Fixed the iLO web interface System Information page to display correct fan speed and temperatures.  
      
      
        * Various SNMP performance enhancements.  
      
      
        * Reworded the event log message to better identify when non-iLO firmware is flashed.  
      
      
        * Added controlled stepping of fan speed to avoid large fan speed changes that could cause fan failures.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.13
changelog:
  -     Fixed a possible security vulnerability when using Integrated Lights-Out
      (iLO's) Integrated Remote Console. Please see Security Bulletin SSRT100934 for
      more information.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20
changelog:
  -     \- IPv6 support for web GUI and Integrated Remote Console on iLO dedicated
      network
      
      \- Support for SNMP v3
      
      \- Location Discovery Services (BL/SL)
      
      \- 3D temp graph
      
      \- Support for Remote Syslog of server events
      
      \- Support for e-Mail alerting of server events
      
      \- Serial Console Record/Playback
      
      \- Support for new iLO Essentials license option
      
      \- Support for new iLO Scale-Out license option
      
      \- FIPS  (Federal Information Processing Standard) Mode compliance support**
      
      \- Integrated Remote Console now supports .NET Framework v4.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20
changelog:
  -     \- The HTTP TRACE method in the iLO 4 webserver is now disabled. Having  
        this feature enabled caused some security scanners to report it as a  
        vulnerability.
      
      \- iLO 4 no longer fails to synchronize the date and time with the Onboard
      Administrator.
      
      \- The iLO 4 Certificate Signing Request countryName object was changed from a
      UTF8 object to  
        a printable string. This will prevent some Certificate Authorities from
      rejecting the iLO 4 CSR.
      
      \- The Integrated Remote Console will now disconnect Virtual Media when the
      USB flash drive is  
        physically removed.
      
      \- The Integrated Remote Console no longer fails to open and displays "HTTP
      error: The operation  
        has timed out".
      
      \- iLO 4 will no longer become inaccessible for 40 minutes after an
      unreachable SNMP alert destination  
        is entered.
      
      \- iLO 4 on BL460c Gen8 servers will no longer log the random event "System
      Overheating (Temperature  
        Sensor 3, Location CPU, Temperature 0C)" in the IML if the second processor
      isn't populated.
      
      \- The SNMP tags have been removed from the MOD_GLOBAL_SETTINGS command. TO
      modify the SNMP  
        parameters, you must now use the MOD_SNMP_IM_SETTINGS command.
      
      \- The pre-failure video playback will no longer end without showing video.
      
      \- A user with insufficient privileges can no longer modify the network
      settings by using the  
        iLO command line interface.  
        
      \- Increased buffer size to allow the importing of a X.509 certificate file up
      to 3072 bytes long (Base64 encoded).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22
changelog:
  -      Improved Active Health System logging for newly added log entries.
        * The persistent mouse and keyboard setting can now be configured by using the set_persmouse_status.xml script.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22
changelog:
  -      Corrected an issue where a spurious power supply event could cause a system to shutdown and record an IML entry due to noise in the power supply presence and status signals.
        * iLO 4 will no longer incorrectly report a failed power supply in the IML  when some power supply insertions are conducted with mismatched power supplies.
        * Corrected a General Power Supply failure message in the IML when there is a power loss or the power cord was not attached to one of the power supplies.
        * Fixed an issue in which iLO Virtual Serial Port Log playback ends too early or too late, preventing logged data from  being displayed, or displaying old data in the wrong location.  The iLO Virtual Serial Port Log playback now stops at the end of the stored data.
        * Corrected a Self-Signed certificate expiration date issue that occurred when iLO is set to the factory default settings after the year 2012.  This may occur if iLO generates a new SSL self-signed certificate after January 18th, 2013.
        * Resolved an issue in which SSH sessions could be abruptly closed, leaving the server side socket in an undetected error condition.  This could lead to no more available SSH sockets until the next iLO reset.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30
changelog:
  -     This version adds support for the following features and enhancements:  
        
      
      
        * System ROM, Chassis Manager, CPLD, and Power Management Controller firmware can be updated in the iLO web interface and via RIBCL scripts.
        * IPv6 network communications (dedicated network connection only). In addition to the features supported in iLO 4 1.2x, the following features are supported: 
          * RIBCL/XML scripting
          * SNMPv3
        * Additional IPv6 functionality was added to the iLO utilities.
        * The following Server Power-On Delay options are available: 15, 30, 45, and 60 seconds.
        * RIBCL can be used with Single Sign-On (SSO).
        * New web server with improved performance and reliability.
        * New SSH server with improved performance and reliability.
        * The System Information > Memory page displays the HP part number for DIMMs.
        * The supported size for Encoded Kerberos tickets increased to 16 KB.
        * SNMP trap 9001 covers all server reset cases instead of only cases in which iLO governs the reset.
        * SNMP Traps are sent if communication between iLO and Insight Remote Support or iLO and Insight Online fails.
        * Improved download performance for the Active Health System log.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30
changelog:
  -     The following issues are resolved in this firmware version:  
      
      
        * A possible security vulnerability related to SSRT101250 existed.
        * The Integrated Remote Console (IRC) playback video could stop responding after recording.
        * An incorrect entry was logged to the iLO Event Log when the IRC was launched to join a Shared Remote Console session.
        * The iLO firmware replaced the server Real Time Clock (RTC) time with the iLO Network Time Protocol (NTP) time on every server reboot. The RTC is now set with the NTP time only when the server is plugged in and returns from an unpowered state.
        * No SNMP alert was logged in HP SIM on failed iLO login attempts.
        * The JAVA Integrated Remote console (JIRC) could not launch with HP SIM Single Sign On (SSO).
        * The iLO SSH Server disconnected sessions during re-key operations.
        * When importing new HP SSO certificates, a "Certificate Could Not Be Stored" error might occur.
        * The Integrated Remote Console (IRC) might not be able to play a Pre-failure video downloaded from a web server.
        * Mismatched Power Supply entries in the Integrated Management Log (IML) were not repaired after the correct power supply was installed.
        * The Event log failed to display the user name when Lock_Config was enabled.
        * No XML Logout iLO Event Log entry is recorded when a user logged out via HPONCFG.
        * No iLO Event Log entries are recorded when IPMI/DCMI is set to Enabled or Disabled by using Mod_Global_Settings.xml.
        * No iLO Event Log entries are recorded when Directory settings are modified through the CLI and XML scripts.
        * No CLI option is provided to change the SNMP port and the SNMP trap port.
        * The Power-On Delay cannot be set to Minimum Delay or Random up to 120 seconds on the Server Power page.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32
changelog:
  -      A security vulnerability related to SSRT101323 has been addressed.
        * A security vulnerability related to SSRT101336 has been addressed.
        * The iLO ROM-Based Setup Utility (RBSU), which is accessed via F8 at Power On, was reduced in fit in a 64KB size limit.
        * iLO allowed some ciphers other than AES/3DES to be used when the AES/3DES Encryption Enforcement Settings were enabled.
        * Firmware upgrades were slow or problematic following a failed URL-based/scriptable virtual media floppy drive session.
        * A boot issue might occur if embedded media was not ready during POST due to an unexpected power event.
        * iLO might crash when the Import Direct DNS Name button is clicked on the Security - Single Sign-On Settings page or when a certificate is imported by using RIBCL.
        * Blade servers might hang during POST if a smart component tries to cold-boot the system.
        * IPMI transactions to read the power consumption from Power Supplies P/N 499250-201 might report an incorrect value of zero watts.
        * CPU overheating messages could be incorrectly detected and logged in the IML and causing iLO to initiate a server shutdown.
        * SSH Channel could close unexpectedly after one command is executed.
        * SSH interface could lock up after multiple back to back connections.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40
changelog:
  -     ENHANCEMENTS:  
        
      This version adds support for the following features and enhancements:  
        
      \- iLO Federation Management  
        NOTE: iLO Federation Management is supported on IPv4 and IPv6 networks on
      the iLO Dedicated     Network Port.  It is not supported on iLO Shared Network
      Port.  
        
      \- Insight Remote Support Direct Connect configuration is available in iLO 4
      1.40 and later.  
        
      \- iLO 4 1.40 and later supports the HP Enterprise Secure Key Manager ESKM 3.1
      and later,  
        which can be used in conjunction with HP Secure Encryption.  
        
      \- Improved Java Integrated Remote Console (IRC)  
        
      \- UEFI System Utilities support on the HP ProLiant DL580 Gen8 server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40
changelog:
  -     FIXES:  
      The following issues are resolved in this firmware version:  
        
      \- Server Auto Power-On might be triggered when iLO is reset through IPMI.  
        
      \- Firmware updates that use USB Virtual Media might fail due to secure flash
      image corruption.  
        
      \- SSH sockets might take 30 seconds to close.  
        
      \- The GET_OA_INFO command output does not include the OA IPv6 address.  
        
      \- The iLO 4 SNMP stack might become unresponsive to SNMP requests.  
        
      \- The file upload section is not displayed on the iLO web interface Firmware
      page.  
        
      \- The Integrated Remote Console (IRC) stops working when iLO is busy.  
        
      \- The .NET Integrated Remote Console (IRC) fails to start in Chrome if a
      trusted certificate is not installed.  
        
      \- Kerberos Keytab files cannot be added from the iLO web interface.  
        
      \- An error occurs if you register for Remote Support with proxy settings, and
      then you delete the proxy settings.  
        
      \- Directory settings information is not consistent between the iLO web
      interface and the scripting interfaces.  
        
      \- The server shuts down when a user exits the system RBSU during an iLO
      reset.  
        
      \- Kerberos Keytab files cannot be added when FIPS mode is enabled.  
        
      \- A service event is not generated when a hard disk drive fails during boot.  
        
      \- The Acquire dialog box is displayed when the remote console is started, but
      there is no active  
        session to acquire.  
        
      \- The status of a spare drive changes to inactive when the spare drive is in
      use.  
        
      \- When the security override switch is enabled, long login names might fail.  
        
      \- TPM status cannot be viewed by using XML scripts.  
        
      \- The IPv6 default gateway might be saved as a static default gateway.  
        
      \- When configured for FIPS mode/AES-DES the key exchange method 'diffie-
      hellman group1 sha1' should not be supported.  
        
      \- The iLO clock fails to synchronize with NTP when a Primary Time Server is
      not entered.  
        
      \- The iLO webserver unexpectedly quits after the NVRAM is cleared.  
        
      \- The iLO DHCPv6/EBIPA address is not displayed in OA when OA is configured
      on an IPv6-only network.  
        
      \- The Backup ROM date is displayed incorrectly on the Diagnostics page in the
      iLO web interface.  
        
      \- The IPMI Get Sensor Reading command returns incorrect data for the Inlet
      Ambient sensor.  
        
      \- Auto Power-On takes two minutes when the delay is set to 15, 30, 45, or 60
      seconds.  
        
      \- Some Power On Self Test (POST) errors might be truncated in the Integrated
      Management Log (IML).  
        
      \- The output of the RIBCL GET_POST_STATE command shows the output for the
      HOST_POWER command.  
        
      \- If the Shared Remote Console feature is not licensed, an error message
      should be displayed when a user  
        clicks the Share button.  
        
      \- iLO cannot be configured to propagate the NTP or OA time setting to the
      host.  
        
      \- An SSH session is not logged out when AES/3DES is enabled or disabled by
      using the CLI.  
        
      \- The iLO CLI and web interface have different length requirements for the
      FQDN.  
        
      \- There is no warning message in the CLI when the power mode is set to OS
      control.  
        
      \- The Login Security Banner does not work consistently between the iLO web
      interface and iLO scripts.  
        
      \- The remote console displays multiple CD-ROM drives with the same drive
      letter.  
        
      \- The SSH interface might freeze after multiple back-to-back connections.  
        
      \- An iLO system with no installed certificates reports that the maximum
      number of certificates is reached.  
        
      \- The temperature graph in the iLO web interface shows details for only one
      sensor when multiple sensors have  
        the same coordinates.  
        
      \- The SNTP settings are not displayed in the iLO web interface after a
      firmware update.  
        
      \- An error occurs when the iLO firmware is updated by using the CLI.  
        
      \- The CPU temperature is reported incorrectly.  
        
      \- An event is not generated when the default language is changed by using
      scripts or the CLI.  
        
      \- An error message is not displayed when an incorrect firmware URL is
      entered.  
        
      \- The Integrated Management Log (IML) displays an error when a maintenance
      note is entered.  
        
      \- An event is not generated when a power-on error occurs.  
        
      \- The VLAN tag cannot be configured by using the iLO RBSU.  
        
      \- The iLO firmware date is displayed incorrectly in the iLO RBSU.  
        
      \- A warning message does not occur when the Local User Accounts setting is
      changed to Disabled for an iLO system that does not have a configured
      directory.  
        
      \- The power-on delay options are inconsistent between the iLO web interface
      and the CLI.  
        
      \- The Intelligent Provisioning version is not displayed on the iLO System
      Information > Firmware page.  
        
      \- The Enterprise Secure Key Manager (ESKM) certificate is deleted if no
      certificate name is entered.  
        
      \- The CLI labels a mismatched power supply with OK status.  
        
      \- An event is not generated when a language pack update fails.  
        
      \- An event is not generated when the Power Regulator settings are modified.  
        
      \- WINDBG with port number 65535 cannot be enabled from the iLO CLI.  
        
      \- Duplicate IP addresses are not detected.  
        
      \- iLO 4 1.20 and later does not send ARP before replying to a ping request.
      This causes iLO 4 to be unreachable to pings from clients with teamed NICs.  
        
      \- Solaris 10 and 11 cannot be installed by using Virtual Media  
        
      \- The SNTP time zone offset is incorrectly applied to the time provided by
      the OA when c-Class blade servers are inserted into the enclosure or are
      e-fused.  
        
      \- When the server serial number is updated in the BIOS, the system board FRU
      data is not updated.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50
changelog:
  -     Enhancements:  
      \- Added an SNMP trap for Uncorrectable Machine Check Error.  
      \- Added the ability for iLO to get Domain name to Get or Display from DHCPv6  
        server.  
      \- Implemented significant performance improvements in iLO Federation
      Management  
        queries.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50
changelog:
  -     Fixes:  
      \- Auto Power On does not work on server blades after upgrading to iLO 4
      v1.40.  
      \- SSH keys cannot be imported by using XML after upgrading to iLO 4 v1.40.  
      \- Random "Embedded Flash/SD-CARD: Failed restart" errors appear in the iLO 4
      Event Log after server shutdown.  
      \- The Windows Server 2008 or 2012 installer might fail with the following
      error message when used with Virtual Media on iLO 4 1.32 and 1.40: "A required
      CD/DVD drive device driver is missing."  
      \- If you create a disk image when Virtual Media is mounted in the Java IRC,
      an invalid message is displayed.  
      \- The keyboard doesn't work when you use the Java IRC to mount an image file
      through a URL.  
      \- When using the Java IRC in Linux, some characters cannot be entered from a
      Japanese keyboard when the Japanese layout is selected.  
      \- iLO might stop responding if the DNS server fails to respond when iLO is
      trying to log multiple entries that require DNS reverse lookup.  
      \- Time zones that are south of the Equator and use DST are handled
      incorrectly.  
      \- An incomplete Japanese message is displayed in the Set to factory defaults
      interface when the Japanese Language Pack is loaded.  
      \- AlertMail implementation is inconsistent between the iLO web interface and
      the CLI.  
      \- iLO does not always respond to multicast M-SEARCH requests.  
      \- Multicast replies display an incorrect iLO version number.  
      \- iLO requires a reset when the IPv6 Multicast Scope is changed for iLO
      Federation discovery.  
      \- The SERVER_POST_STATE element is missing from RIBCL output.  
      \- iLO Virtual Media CD-ROM connect says "ok" when <http://name> is
      unreachable.  
      \- Multiple iLO Federation Management groups cannot be deleted in a certain
      order.  
      \- Menu and Title area return to English characters when the Japanese Language
      Pack is loaded.  
      \- EBIPA IPv6 settings not always updated on iLO when iLO DHCP IPv4 is
      disabled.  
      \- iLO WEB page could stop responding after a firmware update via the group
      firmware update in iLO Federation Management.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.51
changelog:
  -     Intermittent Non-Maskable Interrupt (NMI) Events May Occur on HP ProLiant Gen8
      Servers running on a Hypervisor Operating System With HP Integrated Lights-Out
      4 Firmware Versions 1.30, 1.32, 1.40 and 1.50.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.51
changelog:
  -     1.50 Enhancements:  
      \- Added an SNMP trap for Uncorrectable Machine Check Error.  
      \- Added the ability for iLO to get Domain name to Get or Display from DHCPv6  
        server.  
      \- Implemented significant performance improvements in iLO Federation
      Management  
        queries.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.51
changelog:
  -     1.51 Fixes:  
      \- Intermittent Non-Maskable Interrupt (NMI) Events May Occur on HP ProLiant
      Gen8 Servers running on a Hypervisor Operating System With HP Integrated
      Lights-Out 4 Firmware Versions 1.30, 1.32, 1.40 and 1.50.  
        
      1.50 Fixes:  
      \- Auto Power On does not work on server blades after upgrading to iLO 4
      v1.40.  
      \- SSH keys cannot be imported by using XML after upgrading to iLO 4 v1.40.  
      \- Random "Embedded Flash/SD-CARD: Failed restart" errors appear in the iLO 4
      Event Log after server shutdown.  
      \- The Windows Server 2008 or 2012 installer might fail with the following
      error message when used with Virtual Media on iLO 4 1.32 and 1.40: "A required
      CD/DVD drive device driver is missing."  
      \- If you create a disk image when Virtual Media is mounted in the Java IRC,
      an invalid message is displayed.  
      \- The keyboard doesn't work when you use the Java IRC to mount an image file
      through a URL.  
      \- When using the Java IRC in Linux, some characters cannot be entered from a
      Japanese keyboard when the Japanese layout is selected.  
      \- iLO might stop responding if the DNS server fails to respond when iLO is
      trying to log multiple entries that require DNS reverse lookup.  
      \- Time zones that are south of the Equator and use DST are handled
      incorrectly.  
      \- An incomplete Japanese message is displayed in the Set to factory defaults
      interface when the Japanese Language Pack is loaded.  
      \- AlertMail implementation is inconsistent between the iLO web interface and
      the CLI.  
      \- iLO does not always respond to multicast M-SEARCH requests.  
      \- Multicast replies display an incorrect iLO version number.  
      \- iLO requires a reset when the IPv6 Multicast Scope is changed for iLO
      Federation discovery.  
      \- The SERVER_POST_STATE element is missing from RIBCL output.  
      \- iLO Virtual Media CD-ROM connect says "ok" when <http://name> is
      unreachable.  
      \- Multiple iLO Federation Management groups cannot be deleted in a certain
      order.  
      \- Menu and Title area return to English characters when the Japanese Language
      Pack is loaded.  
      \- EBIPA IPv6 settings not always updated on iLO when iLO DHCP IPv4 is
      disabled.  
      \- iLO WEB page could stop responding after a firmware update via the group
      firmware update in iLO Federation Management.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.53
changelog:
  -     1.53 Fixes:  
      \- Addressed incorrect power supply events seen on SL based HP ProLiant
      servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00
changelog:
  -     Enhancements:  
        
      Gen 9 ProLiant Servers Only  
       Manual iLO reboot via the server UID button--Allows you to use the server
      UID button to initiate a graceful iLO reboot or a hardware iLO reboot.  
       HP ProLiant Pre-boot Health Summary--Displays diagnostic information on the
      server monitor when the server is off and power is available.  
       1 GB Embedded User Partition--Allows you to use a 1 GB non-volatile flash
      memory partition as if it was an SD-card attached to the server.  
        
      Gen 8 and Gen 9 ProLiant Servers  
       iLO Federation Group License Activation--Supports license key installation
      on multiple systems.  
       Group configuration for iLO Federation Groups--Allows you to configure
      groups for the systems in an iLO Federation Management group. Configuring the
      group memberships of individual systems is still supported.  
       HP RESTful API--The HP RESTful API is a management interface that server
      management tools can use to perform configuration, inventory, and monitoring
      of an HP ProLiant server via iLO.  
        
        
      Feature previews:  
       Shared Network Port port selection--Allows you to choose between port 1 and
      port 2 for Shared Network Port functionality. You can configure this setting
      on the Network > Shared Network Port > General page in the iLO web interface.  
          NOTE: Not all sideband NICs are supported. In some cases, port 2 might not be fully functional.  
           
       iLO network connection auto-select--Allows you to configure iLO to
      automatically select the iLO Dedicated Network Port or Shared Network Port,
      based on the detected network activity. This feature can be configured by
      using the iLO CLI or XML scripting.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00
changelog:
  -     Fixes:  
       The error "Max number of certificates has been reached" occurs when SSO
      certificates are imported.  
       The iLO Shared Network Port cannot be enabled for embedded LOM via the ROM-
      based setup utility or iLO web interface.  
       iLO cannot be enabled via the iLO RBSU if it was disabled by using the iLO 4
      Configuration Utility in the UEFI System Utilities.  
       DHCP options can be modified via the ROM-based setup utility when DHCP is
      disabled.  
       The System Information Health Summary page shows an Undefined error message
      on DL380p Gen8 servers.  
       iLO requires a reset for IPv6 Multicast Scope changes.  
       The iLO clock is one hour fast during Daylight Savings Time when it is
      configured by the ROM-based setup utility or the Insight Management Agents.  
       The power supply status for an installed power supply is incorrectly
      displayed as "Not installed" on the System Information Power Information page
      in the iLO web interface.  
       An error message is not displayed when an invalid Gateway IPv4 address is
      configured.  
       Users without the Configure iLO Settings privilege can modify iLO ROM-based
      setup utility settings.  
       The character limit for the Server Name is inconsistent between the iLO web
      interface and the CLI.  
       The power supply status shows Failed/Good, In Use when the power cord is
      removed from the server.  
       Embedded Remote Support fails after sending a second test service event.  
       The iLO Firmware cannot be updated via the Group Firmware Update feature.  
       The 24-hour power graph does not include all available power data.  
       Characters are missing on the Group Virtual Media page after a disk image is
      connected through a URL.  
       The Login Security Banner display on the Login page is incomplete.  
       The CLI hangs after Virtual Media is mounted through a URL.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.02
changelog:
  -      The following condition was added for DIMMs: "Good, Partially in Use."
        * The RIBCL Get Embedded Health has been updated for the following AMP modes: Channel Sparing, Rank Sparing, Intrasocket Mirroring, and Intersocket Mirroring.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.02
changelog:
  -      The iLO Link-Local IPv6 address is displayed during POST when iLO is using the Shared Network Port, but the Shared Network Port does not support IPv6.
        * The inlet air sensor is not displayed on the temperature graph.
        * The Memory page is displayed incorrectly on ProLiant DL580 Gen8 servers.
        * The following message appears during POST after RBSU changes are made and the IML is cleared: iLO FW communication issue-Unable to communicate with iLO FW.
        * A "repaired" message is automatically posted to the IML after a Critical Fan Event.
        * Power button actions do not respond in the HP RESTful API.
        * IPMI Alert Immediate (Get Alert Status) always returns an error completion code.
        * Component firmware flash status is not shown at the bottom of the iLO web interface window.
        * The Remote Console crashes when a URL greater than 256 bytes is mounted.
        * Multiple 6064 SNMP Correctable Memory Error Trap occur when only one is expected.
        * iLO RBSU incorrectly provides the Transceiver Speed Autoselect menu option when the server uses Shared Network Port mode.
        * An incorrect error message is displayed when the boot order is changed by a user without the Configure iLO Settings privilege.
        * The Enable Active Health System logging check box and Apply button are active when the Active Health System has been disabled in hardware by using a motherboard switch.
        * Fan Blowout during POST due to a jammed rotor  continues to occur when the OS is running and the rotor has been repaired.
        *  iLO RBSU does not correctly check user privileges.
        * iLO RBSU incorrectly uses a maximum of 19 characters for user names.
        * The embedded Remote Support services fails to detect an Uncorrectable memory error event.
        * Cache module status is displayed for HP Dynamic Smart Array B140i Controllers.
        * Storage configuration changes are not updated in iLO until the server OS is started.
        * There are virtual media mounting problems when using the HP RESTful API.
        * Multiple mismatched power supplies are not detected.
        * The Active Health System page shows the estimated size of entire log file as Unknown.
        * The iLO web interface crashes when a user browses to the Memory page.
        * The Join Group button on the Administration > iLO Federation page is unavailable until the browser is refreshed.
        * A 404 error occurs when the HP RESTful API is used to access any path underneath /rest/v1/systems/1/bios.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.03
changelog:
  -      Added support for TLS v1.1 and TLS v1.2 when using HTTPS URLs with iLO scripted virtual media, firmware update, certificate import, SSH key import, and for HP remote support registration and data collection.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.03
changelog:
  -      Improved the reliability of DIMM SPD read/write operations.
        * A timing issue could cause intermittent Windows Hardware Error Architecture (WHEA) test failures.
        * Booting from an SD card with ESXi could fail.
        * AMD-based HP ProLiant Gen 8 servers with iLO 4 2.00 or 2.02 might report incorrect processor temperatures.
        * HP ProLiant Gen 8 servers with iLO 4 2.00 or 2.02 might report an incorrect value for the temp1 sensor.
        * HP ProLiant Gen8 servers with iLO 4 2.00 or 2.02 might display an incorrectly lit FAN1 Systems Insight Display (SID) LED when no FAN1 is installed.
        * Partitions on the NAND device might fail to mount.  In some cases, this could result in Active Health System download failures or the Embedded User Partition might not be available.
        * Addressed SSRT101745
        * Addressed SSRT101790
      
      Note: To address the "POODLE" security vulnerability, the iLO security policy
      has changed and SSLv3 is now disabled. You may need to enable TLS (Transport
      Layer Security) in your browser in order to access the iLO web interface.  TLS
      is the successor to SSL (Secure Sockets Layer).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10
changelog:
  -     This version adds support for the following features and enhancements:
      
       New CLI and RIBCL commands for sending SNMP test traps.  
       Agentless Management support for standup storage card firmware versions.  
       The iLO IP address can now be used as the SubjectAltName in a certificate
      signing request.  
       IPMI transport over IPv6.  
       HP RESTful API updates, including support for:  
        \- Mezz and base FRUs  
        \- GET of data to retrieve the Active Health System log  
        \- Support Logs  
       Flex Slot Battery Backup Unit information is displayed on the Information >
      System Information > Power page.  
       Physical and logical network adapters are displayed on the Information >
      System Information > Network page.  
       NIC teaming information is displayed on the Information > System Information
      > Network page.  
       Information about devices installed on the system board, such as adapters,
      PCI devices,  SATA controllers, and Smart Storage Batteries is displayed on
      the new Information > System Information > Device Inventory page.  
       HP and third-party storage controllers that manage direct-attached storage
      and the attached physical drives are displayed on the Information > System  
        Information > Storage page.  
       HP Smart Storage Battery information is displayed on the Information >
      System Information > Summary, Information > System Information > Power, and
      Information > System Information > Device Inventory pages.  
       In addition to the supported OEM parameters, the IPMI boot options for UEFI
      now support the standard parameters.  
       Extended the functionality of Lock_Configuration.xml to include restricting
      the IPMI interface from the system channel.  
       Added support for IPMI 2.0 PEF and PET generation to the IPMI interface.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10
changelog:
  -     The following issues are resolved in this version:  
       Addressed SSRT101886  
       An iLO kernel crash after 40 or more days of uptime under certain operating
      systems can lead to an operating system crash. When this occurs, the iLO Event
      Log records a "Power restored to iLO" event at the time of the OS crash.  
       iLO might send multiple SNMP traps that show the Smart Array battery falsely
      changing status (SNMP trap ID 11020).  
       iLO firmware updates might stay at 1% and never finish.  
       ADH ciphers are accepted in iLO 4 when AES is enabled.  
       Incorrect information is displayed on the Information > System Information >
      Network page when there are similar MAC addresses.  
       SSDP advertisements have bad signatures and iLO Federation groups don't
      display all peers.  
       Power supply sensors are not illustrated in the Temperature graph.  
       The iLO Event Log reports that a firmware update failed even though the
      firmware was updated successfully with the HP SUM Scalable Update feature.  
       The .NET IRC disconnects unexpectedly when playing a captured video file.  
       The Ping Gateway on Startup network setting does not work.  
       In some cases, running the Advanced Power Capping Microcontroller Firmware
      causes future component updates to fail.  
       The UID LED might stop blinking when the Remote Console is still open after
      a system power cycle.  
       The invalid error "Duplicate record exists" occurs while adding a new
      directory group.  
       A user with the Virtual Power and Reset privilege cannot use the Swap ROM
      feature.  
       DL580 servers report an incorrect Power Redundancy state on removal of a
      power supply cable.  
       Intermittent missing OS name and version in get_server_name response.  
       iLO Dedicated Network Port options are displayed on DL60 servers, which
      support only the Shared Network Port configuration.  
       An incorrect error message is displayed when auto power-off is set via XML
      scripting during POST.  
       The Get_Embedded_Health.xml output displays incorrect iLO NIC information.  
       The user name is not displayed in the iLO Event Log when a Language Pack is
      uninstalled.  
       There is a discrepancy between the iLO web interface and XML scripting when
      an HP SSO record is added by DNS name.  
       The Serial Command Line Speed setting is not saved when the speed is changed
      in the iLO 4 Configuration Utility.  
       LDAP does not work after updating from iLO firmware version 1.40 to 1.50.  
       New iLO Federation groups default to the power capping value from a
      previously deleted group.  
       The Link State NIC setting is displayed on the Network General Settings page
      for BL460t servers when this setting is not supported on server blades.  
       SNMP and SNMP trap ports cannot be set without the SNMP_ACCESS tag.  
       The iLO Event Log does not record an event when the AlertMail settings are
      changed via RIBCL and CLP.  
       The power redundancy status is incorrect when a mismatched power supply is
      inserted without a power cord.  
       The iLO Event Log does not record an event when the Remote Syslog settings
      are changed via RIBCL.  
       An incorrect error message occurs when the server name is set via XML during
      POST.  
       The Asset Tag can be configured via XML when the server is off.  
       An invalid domain name can be configured in the iLO 4 Configuration Utility.  
       The iLO 4 Configuration Utility prompts the user to save and reset iLO when
      no change was made.  
       Cert_Request.xml does not display an error when invalid characters are used
      for the state, country and locality.  
       If the Delete SSH Key button is clicked when no SSH key is installed, the
      message "Public Key deleted" is displayed even though there was no installed
      SSH key.  
       When the RESTful Interface Tool is used to display the system ROM version,
      the output incorrectly displays the backup system ROM version.  
       The CLI does not display the oemhp_powercap information when power capping
      is disabled.  
       Multiple incorrect "faulty/unsupported power supply" messages are recorded
      in configurations that use the HP 800W/900W Gold AC Power Input Module or the
      HP Server RPS Backplane Kit.  
       Pwrstat displays incorrect power supply status information for the HP
      800W/900W Gold AC Power Input Module and the HP Server RPS Backplane Kit.  
       An intermittent virtual CD disconnection occurs during a system reboot.  
        
       Note: To address the "POODLE" security vulnerability, the iLO security policy
      has changed in version 2.03 and SSLv3 is now disabled. You might need to
      enable TLS (Transport Layer Security) in your browser in order to access the
      iLO web interface.  TLS is the successor to SSL (Secure Sockets Layer


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.11
changelog:
  -     This release is intended for FIPS 140-2 level 1 validation and Common Criteria
      EAL2+ certification and is based from the iLO 4 v2.10 Release. All bug fixes
      and enhancements related to v2.10 have also been included in this release.
      The current status of iLO 4 firmware v2.11 for these two certifications can be
      found at ttp://h10038.www1.hp.com/certifications.aspx?agencyid=89


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20
changelog:
  -     This version adds support for the following features and enhancements:
      
         The Remote Console security settings were moved from the Administration >  
          Security > Remote Console page to the Remote Console > Security page.  
         The new Authentication Failure Delay Time setting allows users to  
          configure the duration of the iLO login delay after a failed login attempt.  
          This setting can be configured on the Access Settings page.  
         The new Authentication Failures Before Delay setting allows users to
      configure  
          the number of failed login attempts that are allowed before iLO imposes a  
          login delay. This setting can be configured on the Access Settings page.  
         iLO 4 2.20 and later allows you to install more than one language pack.  
            \- For iLO 4 2.10 and earlier--You can install one language pack at a time.  
              Installing a new language pack replaces the currently installed language  
              pack, regardless of the language pack version.  
            \- For iLO 4 2.20 and later--Language packs are not supported on servers that  
              do not have a NAND. Servers without a NAND should continue to use iLO  
              4 2.10.  
            \- iLO 4 2.20 or later requires version 2.20 or later of the iLO language  
              pack.  
            \- When you upgrade from an earlier version of iLO 4 to version 2.20 or  
              later, previously installed language packs are deleted.  
            \- The following language packs are available: Japanese and Simplified  
              Chinese.  
         The HP ProLiant Agentless Management Service status is now listed on the  
          Information > System Information > Summary page.  
         Trusted Module status is now displayed on the Information > Overview page.  
         RIBCL scripts and the CLP can now be used to send a test trap to test the  
          SNMP configuration.  
         Added support for IPv6 in IPMI LAN Configuration Command Parameters.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20
changelog:
  -     The following issues are resolved in this version:
      
         Fixed detection of the Intel GPU sensor in Gen9 servers with the GPU. This
      allows  
          fans to be controlled more reasonably.  
         Staged ROM settings might be lost after CONREP is run if the server was
      reset before  
          iLO was reset.  
         The correct number of license seats is not displayed when 256 or more
      seats are  
          licensed.  
         Fixed an IPMI driver issue for Linux.  
         Fixed a Virtual Media disconnect issue.  
         Fixed a DHCP client renewal issue.  
         Alertmail webpage rejects email addresses with
      [wwww@xxxx.yyy.zz](mailto:wwww@xxxx.yyy.zz)  format  
         Fixed an IPMI boot option issue when using IPMI tool.  
         The set command in the iLO CLI does not finish on DL380 Gen9 servers.  
         The iLO IPv6 options are set to the default values when FIPS mode is
      enabled.  
         The iLO web interface hangs for a few minutes when a long string is
      entered for a  
          group firmware update.  
         Added an iLO workaround for IPMI tool boot parameter command options.  
         LDAP authentication fails when a password contains diacritic characters.  
         LDAP authentication might fail against a properly configured OpenLDAP
      server due to  
          protocol version restrictions.  
         iLO sends several multicast join/leave requests when disabling multicast.  
         iLO event logs that contain an IP address are dropped if the DNS lookup
      queue is  
          full. These events are now logged with (DNS name not found) in place of the DNS name.  
         The iLO web interface allows an iLO Federation Group Key with more than 32
      characters  
          when the character limit is 31.  
         The set_Boot_Mode.xml script fails when you use HPONCFG to set legacy mode
      for Gen8  
          servers.  
         The Firmware page incorrectly displays slot 0 for HP220i Host adapters.  
         The Asset Tag can be set via XML when the server is powered off, except
      for when  
          the server is in UEFI mode.  
         An Embedded Flash/SD-Card subsystem failure is not logged in iLO Event
      log.  
         iLO does not reset when Active Health System logging is enabled via XML.  
         An iLO event log entry is not recorded when network settings are modified  
          by using the CLI.  
         The floppy disc boot options always, never, and once are displayed in the
      Gen9 CLI,  
          but these features are not supported.  
         A TPM Caution message is not displayed when a new language pack is
      installed.  
         The tooltip on the Device Inventory page does not disappear when you click  
          outside the table.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.22
changelog:
  -     This version adds support for the following features and enhancements from
      version 2.20:
      
         The Remote Console security settings were moved from the Administration >  
          Security > Remote Console page to the Remote Console > Security page.  
         The new Authentication Failure Delay Time setting allows users to  
          configure the duration of the iLO login delay after a failed login attempt.  
          This setting can be configured on the Access Settings page.  
         The new Authentication Failures Before Delay setting allows users to
      configure  
          the number of failed login attempts that are allowed before iLO imposes a  
          login delay. This setting can be configured on the Access Settings page.  
         iLO 4 2.20 and later allows you to install multiple language packs.  
            \- For iLO 4 2.10 and earlier--You can install one language pack.  
              Installing a new language pack replaces the currently installed language  
              pack, regardless of the language pack version.  
            \- For iLO 4 2.20 and later--Language packs are not supported on servers that  
              do not have a NAND. To continue using language packs on servers without a NAND  
              use iLO 4 2.10 or earlier.  
            \- When you upgrade from an earlier version of iLO 4 to version 2.20 or  
              later, previously installed language packs are deleted.  
            \- iLO 4 2.20 or later requires version 2.20 or later of the iLO language  
              pack.  
            \- When version 2.20 or later of a language pack is installed, installing a new  
              language pack of the same language (version 2.20 or later) replaces the currently  
              installed language pack.  
            \- The following language packs are available: Japanese and Simplified  
              Chinese.  
         The HP ProLiant Agentless Management Service status is now listed on the  
          Information > System Information > Summary page.  
         Trusted Module status is now displayed on the Information > Overview page.  
         RIBCL scripts and the CLP can now be used to send a test trap to test the  
          SNMP configuration.  
         Added support for IPv6 in IPMI LAN Configuration Command Parameters.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.22
changelog:
  -     The following issues are resolved in this version:
      
         When the iLO 4 firmware is updated to version 2.20, the iLO security
      settings might be  
          reset to the default values.  
         Embedded media handling was updated to reduce embedded media errors.  
         Addressed SSRT102184  
        
      The following issues are resolved in version 2.20 (replaced by 2.22):  
        
         Fixed detection of the Intel GPU sensor in Gen9 servers with the GPU. This
      allows  
          fans to be controlled more reasonably.  
         Staged ROM settings might be lost after CONREP is run if the server was
      reset before  
          iLO was reset.  
         The correct number of license seats is not displayed when 256 or more
      seats are  
          licensed.  
         Fixed an IPMI driver issue for Linux.  
         Fixed a Virtual Media disconnect issue.  
         Fixed a DHCP client renewal issue.  
         The Alertmail page in the iLO web interface rejects email addresses with
      the following  
          format: [wwww@xxxx.yyy.zz](mailto:wwww@xxxx.yyy.zz).  
         Fixed an IPMI boot option issue when IPMI tool is used.  
         The set command in the iLO CLI does not finish on DL380 Gen9 servers.  
         The iLO IPv6 options are set to the default values when FIPS mode is
      enabled.  
         The iLO web interface hangs for a few minutes when a long string is
      entered in the  
          Firmware URL box on the Group Firmware Update page.  
         Added an iLO workaround for IPMI tool boot parameter command options.  
         LDAP authentication fails when a password contains diacritic characters.  
         iLO sends several multicast join/leave requests when disabling multicast.  
         iLO event logs that contain an IP address are dropped if the DNS lookup
      queue is  
          full. These events are now logged with (DNS name not found) in place of the DNS name.  
         The iLO web interface allows an iLO Federation Group Key with more than 32
      characters  
          when the character limit is 31.  
         The set_Boot_Mode.xml script fails when you use HPONCFG to set legacy mode
      for Gen8  
          servers.  
         The Firmware page incorrectly displays slot 0 for HP220i Host adapters.  
         The Asset Tag can be set via XML when the server is powered off, except
      for when  
          the server is in UEFI mode.  
         An Embedded Flash/SD-Card subsystem failure is not logged in the iLO Event
      Log.  
         iLO does not reset when Active Health System logging is enabled via XML.  
         An iLO Event Log entry is not recorded when network settings are modified  
          by using the CLI.  
         The floppy disc boot options always, never, and once are displayed in the
      Gen9 CLI,  
          but these features are not supported.  
         A TPM Caution message is not displayed when a new language pack is
      installed.  
         The tooltip on the Device Inventory page does not disappear when you click  
          outside the table.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.30
changelog:
  -     This version adds support for the following features and enhancements:
      
        * IPMI Platform Event traps can now be sent to IPv6 destinations.
        * The Smart Array drive media type is now available via SNMP, RESTful API, iLO web interface, and RIBCL.
        * The Smart Array drive RPM is now available via SNMP and the RESTful API.
        * Power capping can now be enabled via the RESTful API when the feature is disabled by the ROM settings.
        * Support for new Access Settings options has been added to the RESTful API.
        * Security enhancements: 
          * Removed export ciphers from the default configuration to address false positives reported by scanning tools.
          * Disabled TLS v1.0 in FIPS Mode and Enforce AES/3DES Encryption mode.
          * Added SSH support for aes256-ctr cipher and hmac-sha2-256 mac to fix a connection issue in some default SSH configurations.
        * The Affected Systems list on iLO Federation pages can be exported to a CSV file.
        * The iLO Event Log is now searchable and can be filtered by event severity, last update, or initial update.
        * The IML is now searchable and can be filtered by event severity, class, last update, or initial update.
        * The following service event types are now supported by HP remote support: 
          * SAS Physical Drive Status Changed Event
          * Storage System Fan Status Changed Event
          * Storage System Power Supply Status Changed Event
        * The new Chassis Information page is displayed for Apollo servers and SL and XL servers. For these server types, some information from the System Information > Power page has been moved to this page.
        * The new Software Information page displays HP and HP-recommended third-party software, running software, and installed software.
        * Troubleshooting information is available for selected IML events. Supported events are displayed as links in the Description column on the IML page.
        * Servers with a TPM or TM display the module type on the iLO Overview page.
        * Added a new IPMI OEM command to change channel assignments.
        * Increased the number of concurrent IPMI sessions.
        * Updated to DCMI 1.1, parameter revision 2.
        * Added IPMI over IPv6 support.
        * IPMI memory events in SEL now include the DIMM number.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.30
changelog:
  -     The following issues are resolved in this version:
      
        * The iLO Federation group licensing feature does not decode license keys.
        * A RESTful API Power Supply Health Status Warning occurs when no power supply is installed.
        * License keys are displayed when snmpwalk is used.
        * An incorrect URL is displayed for newly-registered providers.
        * On Gen8 servers, when a TPM is present and enabled, the displayed TPM Module value is incorrect.
        * On blade servers that support UEFI, an iLO CLI session hangs while executing the "show system1/bootconfig1" command.
        * An incorrect error message is displayed when a user tries to edit a deleted user account.
        * An LDAP login causes an invalid session URI.
        * iLO hangs when a directory user tries to log in with encryption enabled.
        * iLO Federation group power caps cannot be set or edited by using the RESTful API.
        * On DL20 servers, MULTICAST_FEDERATION_ENABLED can be configured when the Shared Network Port is enabled.
        * In Internet Explorer 11, the iLO Event Log and IML Last Update and Initial Update filter shows a blank filter option.
        * A .NET IRC session closes when it is accessed by three different browser sessions.
        * The wrong PSU firmware version is displayed in the iLO web interface and SNMP.
        * A RESTful API Property Unknown Response message occurs during a firmware update.
        * A RESTful API Property Unknown Response message occurs when iLO Functionality is set to Disabled.
        * A RESTful API Property Unknown Response message occurs when the Virtual Power Press And Hold option is used.
        * The RESTful API cannot be used to set iLO to the factory default settings.
        * An error occurs when the Set_Persistent_Boot_Order.xml script is used on servers that support UEFI.
        * A 500 Internal Server Error occurs when an Email Address, Sender Domain, or SMTP Server value with 63 characters is entered on the AlertMail page.
        * The AlertMailEmail parameter does not display complete email addresses.
        * External Storage trap events are not sent to the HP Support Center.
        * The following error occurs during POST: 338-HP RESTful API Error - Unable to communicate with iLO FW.
        * Test events can be sent when HP remote support is not configured.
        * The Get_TPM_Status.xml script returns incorrect XML.
        * Product names might be appended to version numbers on the Software Inventory page.
        * An incorrect message is displayed when AES encryption is re-enabled by using the Mod_Global_Settings.xml script.
        * When using the RESTful API, the SNMP AlertDestination does not validate the IP address.
        * Acceptance of the SNMP Alert Destination IP address in the CLI and iLO web interface is inconsistent.
        * Incorrect status information is displayed for empty PCI slots.
        * The P840ar is displayed as a P840.
        * False errors were reported after a successful Power Management Controller firmware update, and were followed by an inability to communicate with a rebooting Power Management Controller.
        * Reduced the frequency of iLO Event Log additions for IPMI session login/logouts.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.31
changelog:
  -      Fixed an issue where the SPI bus could lock up causing iLO and the host server to become unresponsive if iLO is rebooted while the server is in early POST.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.40
changelog:
  -     This version adds support for the following features and enhancements:  
        
         The iLO web interface has been updated to support the Hewlett Packard
      Enterprise style, URLs, and company information.  
         The Java IRC now includes two alternatives: A Java Web Start console and a
      Java applet-based console. The Java Web Start option works in newer browsers
      that do not allow the applet version to run.  
          On systems with OpenJDK, you must use the Java applet-based console with a browser (such as Firefox) that supports a Java plug-in.  
         The new Critical Temperature Remain Off setting can be configured via
      RIBCL for all nonblade servers.  This setting controls system behavior when
      the system is shut down due to thermal protection circuitry.  
          This is a different protection mechanism for thermal events, and it is not based on temperature sensor thresholds, OS policy, or the environmental abnormality automatic shutdown configuration.   
         The following service events are now supported with embedded Remote
      Support registration:  
          \- ATA Disk Drive Status Changed Event  
          \- Fibre Channel Host Controller Status Changed Event  
         The Server Reset button is now available on the Boot Order page when the
      Boot Mode is modified.  
         The NVMe Backplane PIC firmware can now be updated via iLO.  
         The logical drive label and ID were added to the RESTful API.  
         NIC auto-selection can now be configured to search both Shared Network
      Ports on servers that support this hardware configuration. This feature can be
      configured via the CLI and RIBCL.  
         NIC auto-selection can now be configured to support NIC failover. When
      enabled, iLO automatically begins searching for a NIC connection when the
      current connection fails. This  
          feature can be configured via the CLI and RIBCL.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.40
changelog:
  -     The following issues are resolved in this version:  
        
         NIC auto-selection can be configured via RIBCL on DL60 and DL80 servers.
      These servers do not support the iLO Dedicated Network Port or NIC auto-
      selection.  
         There is no POST error after one or more fans are removed.  
         iLO does not collect and delete out of date or unused BIOS provider
      schemas and registries.  
         The iLO 4 web server might stop responding after an invalid file is
      submitted on the firmware update page.  
         When system throttling occurs on Gen8 servers, the duration is longer than
      necessary.  
         Cookies set by older versions of iLO were not understood correctly and
      might cause problems when you try to select iLO Federation groups.  
         The chassis firmware version number is not displayed consistently in the
      web interface.  
         Sorting by column does not work in some iLO web interface tables.  
         The language icon at the bottom of the browser window is not displayed in
      Internet Explorer.  
         The domain name cannot be set via the CLP when the Shared Network Port is
      enabled.  
         A drive failure does not trigger an action when IPMI PEF is enabled.  
         The json/power_alert API returns an incorrect error (HTTP error 500) for
      bad parameters.  
         The wrong iLO self-test name "UnknownSelfTest" is displayed for the NVRAM
      space test in Redfish output.  
         The UID Indicator status does not change to BLINK when the Integrated
      Remote Console is active.  
         Kerberos authentication cannot be enabled when FIPS mode is enabled.  
         Keystrokes are repeated in the Integrated Remote Console when the server
      is in the UEFI Shell.  
         Data is not displayed in the power meter 20 minute or 24 hour graph.  
         The License page does not refresh to update the status after an iLO
      Advanced license is installed.  
         Redfish output does not group the Average, Minimum, and Peak values
      together in the Fast Power Meter output.  
         The NIC Information page displays the address 0.0.0.0 when the IPv6
      address is the only IP address available for the iLO NIC.  
         Duplicate entries for network cards are displayed on the Device Inventory
      page.  
         Redfish output displays an incorrect memory type for non-HPE memory.  
         The NIC Information page displays the value N/A when a NIC team is
      configured.  
         An incorrect error message is displayed for the TESTTRAP command after
      SNMP alerts are disabled.  
         Power consumption values are incorrect in Redfish
      Chassis/1/Power/FastPowerMeter/ output.  
         Power supply bay numbering is inconsistent between the web interface and
      RESTful API output.  
         If an SNMP test alert is sent when SNMPv1 traps are disabled and SNMPv3
      users are not defined, iLO reports a successful test when an error should be
      displayed.  
         An event log message is not logged when an SSL certificate is imported via
      the RESTful API.  
         A password that contains the equals sign (=) cannot be set when a user is
      added by using the CLI.  
         The value null is displayed for all RESTful API NetworkAdapters packet
      statistics.  
         The RESTful API schema file does not include the supported values for
      SpeedMbps.  
         An infinite loop in the file system check utility causes slow system
      performance.  
         DL580 Gen9 servers might fail to boot from an SD card.  
         The 53-Sensor LOM is displayed as missing on the Temperatures page for
      DL580 Gen8 servers.  
         After a vulnerability scan, iLO 4 might be left doing ACK flood with the
      scanner software.  
         iLO 4 might become unresponsive when attempting to delete an old AHS file
      with an invalid character in its name.  
         AlertMail rejects email addresses with hyphen characters.  
         Only one LDAP server can be configured by using RIBCL.  
         Insight Remote Support is not alerted if a failed hard drive is on a bay
      number above 18.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.42
changelog:
  -     This release is based on the 2.40 iLO 4 FW Release and contains all the fixes
      and enhancements included in that version.  
      
      Also included in this release:
      
        * Added a new RIBCL command "FORCE_FORMAT" that enables the recovery of the 4 GB embedded non-volatile storage (NAND Flash) if it is not available.  iLO resets automatically afterward for this operation to take effect.  If using Intelligent   Provisioning, then it will need to be reinstalled. This change is added to help in special cases that require this to fix a problem and a list of symptoms can be found below.  This is a limited release and availability is limited.  This will   be not web-released. 
          * Symptoms: 
            * 8192 Self-Test Error reported
            * Errors while applying OneView profiles
            * Can't extract Active Health System
            * Intelligent Provisioning doesn't load when F10 is pressed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.44
changelog:
  -     Enhancements:  
       Performance improvements - fewer SMIs.  
       Enhanced MCTP, PMCI and I2C code used to gather information.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.44
changelog:
  -     This release is based on the 2.40 iLO 4 FW Release and contains all the fixes
      and enhancements included in that version.
      
      Also included in this release:
      
        * Gen 8 systems no longer include unnecessary wait for MCTP device discovery in order to initialize sensors.
        * Fixed issue where intermittently the IPMI SDRR initialization would take up to 120 seconds.
        * Added iLO event log entry for IPMI PEF actions.
        * Enhanced disk drive status to include controller failure status.
        * Addressed an issue where a Smart Array battery failure could trigger excessive SMI interrupts when NVDIMMs are not present in the system. This could cause a server hang.
        * Auto Power On not working on SL/XL servers.
        * Fixed iLO 4 in Gen9 erasing ServerName EV in non-Virtual Connect environments. This caused them to show as "host is unnamed" in the Onboard Administrator GUI.
        * Fixed iLO 4 SNMP returning wrong IP address when snmpbulkget was used.
        * Fixed Remote Support 'Data Package Validation failed' error message.
        * Unable to remove Active Directory Groups via RIBCL.
        * Fixed RIS data storage file path validation and recovery.
        * Fixed unnecessary clearing of the RESTful API as a result of BIOS upgrade/downgrade.
        * Fixed setting of SET_PERSISTENT_BOOT bootorder for systems with a long boot order list.
        * Fixed support for systems with much larger overall SMBIOS records.
        * Fixed HP RESTful tool errors. BIOS registration could produce empty entries.
        * Fixed loss of communication with Onboard Administrator.
        * Removed font download from external source at login.
        * Fixed problems associated with Apollo 4200 with 25 drives. Needed to support more internal platform definitions.
        * Security fixes/enhancements: 
          * Modified "Enforce AES/3DES Encryption" setting to only allow TLS 1.2 protocol.
          * Security fix. See HP Security Bulletin HPSBHF03441.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50
changelog:
  -     Note for ESXi users: If you are booted from the Embedded SD Card, it is
      strongly  
      Recommended that you reboot the server immediately after updating to iLO 4
      v2.50.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50
changelog:
  -     This version adds support for the following features and enhancements:
      
        * Implemented Garbage collection on the RESTful API allowing for automatic recovery in the case of bad or missing data.
        * Updates to the enclosure connection status (CPQSTSYS cpqSsBoxConnectionStatus) now correctly report when an enclosure is disconnected or reconnected, and sends trap cpqSsConnectionStatusChange where appropriate.
        * This version adds protection to the lifespan of the embedded 4GB non-volatile storage (NAND) by implementing a daily write count limit that is well above the normal daily activity.  This ensures a runaway process will not inadvertently write to the NAND excessively leading to eventual failure.
        * Changed the default SSL certificate signing to SHA-256.
        * Added support for IP addresses in the SubjectAltName field of the iLO SSL certificate.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.50
changelog:
  -     The following issues are resolved in this version:
      
        * Dynamic Power Capping still works when set to disabled.
        * Server may shut down after repeated insertion and removal of hot-plug power input modules for RPS backplanes. 
        * Repeated LDAP tests cause iLO LDAP User Authentication to fail.
        * The reporting of location discovery services data via the RESTful API on ML/DL servers failed even with iLO Advanced license installed.
        * Rare memory leak that could lead to slow or failed iLO interfaces due to unverified data returns from unregistered providers.
        * Corrected the link on the direct connect registration page to point to [www.hpe.com/support/hpesc](http://www.hpe.com/support/hpesc) instead of [www.hpe.com/services/hpesc](http://www.hpe.com/services/hpesc).
        * OA communication issue after OneView SPP update.
        * Status of pure Fibre Channel cards show up as Unknown in Network Tab of iLO System Information.
        * External Rest Providers removed after upgrading BIOS, booting, and then resetting iLO.
        * Rarely a GET to the SNMP MIB will fail.
        * Rarely updates using HPSUT fail.
        * iLOs won't join Federation group or respond to SSDP requests if DHCPv4 is configured but an IP address is not obtained at iLO boot time.
        * Prev/Next links and list behavior of iLO federation are not consistent.
        * Security fixes/enhancements: 
          * Improved AlertMail message body encoding.
          * CBC Mode ciphers disabled in FIPS/AES Modes (both Webserver and SSH).
          * RC4 has been removed from the default cipher list.
          * 3DES and SHA-1 are disabled in FIPS mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.53
changelog:
  -     This version adds support for the following features and enhancements:  
         iLO Amplifier Pack - Advanced Server Firmware/Driver and License
      Management Solution  
         OpenLDAP  
         OpenSSL 1.0.1u FIPS  
         PSRT 301  
         CSRs no longer include the iLO IP address by default. To include the iLO
      IP address in the CSR, enable  
          the include iLO IP Address(es) option in the iLO web interface.  
         Added an iLO RESTful API option to include the iLO IP address in SSL
      certificate CSRs.  
         AlertMail formatting improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.53
changelog:
  -     The following issues are resolved in this version:  
         Fixed an issue that led to POST Error: 333-iLO RESTful API Error - Unable
      to communicate with the iLO firmware when an SD card is was installed.  
         Fix handling of logical drive indexing, found in cases where logical
      drives are not contiguous.  
         Power loss occurs when hot-plugging RPS backplane during runtime.  
         High fan noise occurs during ML110 Gen9 server system startup.  
         IPMI Drive fault is incorrectly mapped to "In Failed Array" on drive
      sensors.  
         Target node iLO is unavailable when an HPE OneView server profile is
      applied.  
         The iLO RESTful API Software Inventory is incomplete when compared to the
      iLO web interface.  
         The iLO RESTful API does not return complete version strings for all
      software components.  
         Unable to use IPMI to "Set Serial Number" and "Set Product ID".  
         Fan failure and server shutdown occur on SL230s Gen8 servers.  
         Reverse Address Translate returns bad values when called with hponcfg.  
         The iLO RESTful API does not return the exact PCI device location for PCIe
      components.  
         An incorrect device type is reported for the embedded SATA controller.  
         Performing a NAND format may leave the REST provider registration in an
      unstable state.  
         Solid state drives are intermittently reported as hard disk drives.  
         Fixed SNMP configuration read failure issue due to wrong FQDN trap
      destination configuration.  
         Fixed an issue that could lead to distorted video after setting boot mode
      to UEFI via RIBCL.  
         False Self-Test error on USB port may be reported when an HPE ProLiant
      Gen8-Series server is powered Off (Advisory found at:
      http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-
      a00007681en_us)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.54
changelog:
  -     This version adds support for the following features and enhancements:
      
        * iLO Amplifier Pack - Advanced Server Firmware/Driver and License Management Solution
        * OpenLDAP
        * OpenSSL 1.0.1u FIPS
        * PSRT 301
        * CSRs no longer include the iLO IP address by default. To include the iLO IP address in the CSR, enable the include iLO IP Address(es) option in the iLO web interface.
        * Added an iLO RESTful API option to include the iLO IP address in SSL certificate CSRs.
        * AlertMail formatting improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.54
changelog:
  -     The following issues are resolved in this version:
      
        * Resolved an issue where in some cases iLO configuration data could be reset to default values after an iLO firmware upgrade (only affects Gen8 servers).
        * Improved the mechanism to reset communication to the non-volatile storage (NAND) upon a warm reboot of the server (to reset an inaccessible NAND)
        * NOTE: If the NAND is inaccessible when upgrading to iLO 4 2.54 firmware, an AC power pull may be necessary to reset an inaccessible NAND.
      
      The following issues are resolved in version 2.53 (replaced by 2.54):
      
        * Fixed an issue that led to POST Error: 333-iLO RESTful API Error - Unable to communicate with the iLO firmware when an SD card is was installed.
        * Fix handling of logical drive indexing, found in cases where logical drives are not contiguous.
        * Power loss occurs when hot-plugging RPS backplane during runtime.
        * High fan noise occurs during ML110 Gen9 server system startup.
        * IPMI Drive fault is incorrectly mapped to "In Failed Array" on drive sensors.
        * Target node iLO is unavailable when an HPE OneView server profile is applied.
        * The iLO RESTful API Software Inventory is incomplete when compared to the iLO web interface.
        * The iLO RESTful API does not return complete version strings for all software components.
        * Unable to use IPMI to "Set Serial Number" and "Set Product ID".
        * Fan failure and server shutdown occur on SL230s Gen8 servers.
        * Reverse Address Translate returns bad values when called with hponcfg.
        * The iLO RESTful API does not return the exact PCI device location for PCIe components.
        * An incorrect device type is reported for the embedded SATA controller.
        * Performing a NAND format may leave the REST provider registration in an unstable state.
        * Solid state drives are intermittently reported as hard disk drives.   
        * Fixed SNMP configuration read failure issue due to wrong FQDN trap destination configuration.  
        * Fixed an issue that could lead to distorted video after setting boot mode to UEFI via RIBCL.
        * False Self-Test error on USB port may be reported when an HPE ProLiant Gen8-Series server is powered Off (Advisory found at: http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-a00007681en_us)
        * Improved error handling of option card AHS data that could result in excessive descriptor growth resulting in large AHS data files.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.55
changelog:
  -     This version adds support for the following features and enhancements:
      
        * The Self-signed SSL certificate can now be regenerated.
        * New iLO RESTful API command to allow an auxiliary power cycle of the server on the next host power down.
        * Added THERM_TRIP events, OS_STOP_SHUTDOWN, OS_NMI, ACPI, PCI-E Bus Error and CPU error logs to the SEL. 
        * Added OEM type SEL event with IML info on critical events.
        * Improved reliability of Embedded Media attach and diagnostics.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.55
changelog:
  -     The following issues are resolved in this version:
      
        * Masked out errant failures due to charging of storage battery.
        * Implemented cell voltage separation pre-failure warning for storage battery.
        * iLO RESTful API output might display incorrect power supply information.
        * iLO Federation group authentication errors might occur if you repeatedly add and remove groups during a query.
        * An iLO RESTful API event subscription might be lost when DELETE and CREATE subscriptions occur at the same time that the transmitter waits to retry an action.
        * During CAC smartcard authentication, the iLO RESTful API returns a session URI that incorrectly contains uppercase letters.
        * In certain conditions, the Rest server becomes unavailable during a GET of the IELs.
        * The iLO web interface language pack redirects to English.
        * The iLO RESTful API output text represents upper threshold values as lower thresholds.
        * The Linux openipmi driver does not poll the receive message queue if KCS host irq not enabled.
        * The iLO RESTful API EthernetInterfaces link should be under the system/1 root resource, and not in the OEM section.
        * SNMPv3 Engine Boot is not getting incremented on iLO reset.
        * IPMI FRU read returns incorrect completion code for response too long.
        * IPMI Get PEF Capabilities returns the number of valid table entries instead of the total number of table entries.  
        * IPMI Set Boot Options for one time change for boot mode UEFI/Legacy fixed.  
        * iLO restserver suspends when patching bad payload to external provider array.
        * iLO REST API returned 500 internal error for a GET of systems/1/ leading to failed One View Profile Apply.
        * iLO RESfulT API events are sending incorrect "Host" header when using IPv6.
        * iLO time becomes Unset after update from 2.50 or prior to 2.54.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.60
changelog:
  -     Install this update to take advantage of significant improvements to the write
      algorithm for the embedded 4 GB non-volatile flash memory (also known as the
      NAND). These improvements increase the NAND lifespan.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.60
changelog:
  -     This version adds support for the following features and enhancements:
      
        * IPMI/DCMI over LAN access is disabled by default on new servers with iLO 4 2.60.
        * IPMI/DCMI over LAN access is disabled after you reset iLO 4 2.60 to the factory default settings. 
        * Each time iLO starts, it backs up the iLO configuration to the nonvolatile flash memory (NAND). If the SRAM is erased, the configuration is automatically restored.
        * Improved Active Health System logging efficiency to prolong the NAND lifespan. 
        * Added iLO health status to the Overview page. If the status is Degraded, this value is also displayed on the Login page.  
        * Added an SNMP trap for a power fault condition on Gen8 servers.
        * Added the list of open source licenses to the login page.  
        * Added a Format Embedded Flash and reset iLO button to the Diagnostics page. When directed by Hewlett Packard Enterprise support, you can use this feature to recover Active Health System functionality.
        * Re-signed the Java IRC to extend the certificate expiration date. 
        * Re-signed the .NET IRC to extend the certificate expiration date. 
          * With this enhancement, the .NET IRC requires version 4.5.1 or later of the .NET Framework.
        * Added the ability to remove a SSL certificate and regenerate the iLO self-signed certificate. 
          * Note: HPE recommends using a CA signed certificate.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.60
changelog:
  -     The following issues are resolved in this version:
      
        *  iLO 4 unexpectedly restored itself to factory default settings when an user did not initiate the process. 
        * When Auto Power-On is set to Always Power On to Restore Last Power State, the server might not power on after a cold reset. 
        * False nonvolatile flash memory (NAND) test failures might occur after a firmware upgrade.
        * Incorrect RAM and Storage values are displayed on the HPE OneView for VMware vCenter tab.
        * Remote Support disk events include the text "Not Available" for the variables when data is missing.
        * Some Power Supply information is missing from the iLO web interface.
        * iLO displays Failed status instead of Disabled status when the Smart Array Cache Module battery is disconnected.
        * An iLO SSH port disconnection issue was observed after more than two days of continuous operation.
        * Values do not move up when the preceding entries in the Directory User Context fields are cleared.
        * Boot failures might occur when booting with a MicroSD card in Legacy mode.
        * Changed the resolution of a Redfish SSD wear field to display in percentage.
        * The date and time settings are reset after a firmware update.
        * The server powers on instead of shutting down when multiple power-on requests are sent.
      
      SECURITY FIXES:
      
        For the latest security bulletins and vulnerabilities addressed in this
      version, please visit:  
        https://support.hpe.com/hpesc/public/home  
      
      Security best practices:
      
        Please refer to the HPE Integrated Lights-Out Security Technology Brief for
      the latest on security best practices at:  
        http://www.hpe.com/support/iLO4_security_en


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.61
changelog:
  -     The following issues are resolved in this version:
      
        * Intermittent boot failures encountered when server boots from MicroSD card.
        * Fixed problem with AHS download that might have unreadable data for the current day.
        * iLO Web GUI sessions might not logoff at the end of timeout period.
        * Incorrect information displayed for Power Supply Bay in AHS viewer.
        * Licence hyperlink in Access Settings page of GUI leads to Page Not Found.
        * Unable to login to iLO CLI after setting iLO to factory defaults, requiring an additional iLO reset.
        * Unable to delete REST interface sessions with users having certain special characters.
        * SNMP may become unresponsive over a period of time.
      
      SECURITY:
      
        For the latest security bulletins and vulnerabilities, please visit:  
        https://support.hpe.com/hpesc/public/home  
      
      Security bulletins:
      
        * HPESBHF03866
      
      Security best practices:
      
        Please refer to the HPE Integrated Lights-Out Security Technology Brief for
      the latest on security best practices at:  
        http://www.hpe.com/support/iLO4_security_en


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.10
changelog:
  -     Initial iLO 5 release with the following features:
      
        * The iLO Service Port on the front of the server is new on Gen10 ProLiant servers and Synergy compute modules. Use this feature to connect a client directly to the server to access the iLO web interface, remote console, CLI, or scripts. You can also connect a USB key and download the Active Health System log to a supported USB flash drive.
        * Improved HPE Agentless Management support for out of the box SNMP-based server management that does not require OS-based agents. OS-based agents are not supported on Gen10 servers.
        * Improved secure firmware update and recovery.
        * Secure Start ensures firmware integrity for essential system firmware.
        * Runtime firmware verification scans essential system firmware for further system integrity.
        * Automatic secure recovery of essential system firmware.
        * Common Access Card (CAC)Smartcard authentication.
        * New user account privilege levels. Specific privileges for BIOS, Storage, and Network configuration.
        * Virtual Media performance is typically at least twice as fast as it was with iLO 4.
        * New iLO web interface design.
        * Expanded Redfish support.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.11
changelog:
  -      This firmware release is intended for FIPS 140-2 (level 1) validation and Common Criterial (EAL 2+) certification. For the status of both, go to http://csrc.nist.gov/groups/STM/cmvp/validation.html for FIPS and http://www.commoncriteriaportal.org/ for Common Criteria. Search for "iLO 5".
        * Updated cryptographic stack as required by FIPS inspection and validation process.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15
changelog:
  -     Users should update to this firmware version if their system is  
        affected by one of the documented fixes or if there is a desire to utilize
      any  
        of the enhanced functionality provided by this version.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15
changelog:
  -      iLO backup and restore--This feature allows you to restore the iLO configuration on a system with the same hardware configuration as the system that was backed up. For example, you could use this feature if the system board is replaced, an accidental or incorrect configuration change occurred, or iLO was set to the factory default settings.  This feature is not meant to duplicate a configuration and apply it to a different iLO system.
        * AMD platform support
        * Support for diffie-hellman-group-exchange-sha256.
        * Support for multiple destination AlertMail email addresses. Enter the addresses separated by a semicolon.
        * iLO RESTful API features: 
          * Aux Power Reset
          * Jitter Control features to get and set Jitter Control Mode and Frequency
        * New iLO RESTful API properties to bridge the gap between RIBCL and iLO RESTful API features: 
          * High Efficiency Mode
          * Encryption-related properties and Cache Module Serial Number
          * Login Security Banner
          * Current Power on Time (provides the time since the system was last powered on).
          * Persistent Mouse/Keyboard Enabled
        * New iLO RESTful API  events for NVDIMM Init Error and Runtime Firmware Authentication Error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15
changelog:
  -      No traps from the System Management Assistant are received when SNMP is disabled in the  iLO web interface.
        * The power profile cannot be changed through the iLO web interface.
        * Network transmission graph data is not populated in Active Health System logs.
        * The NVDIMM firmware version is not displayed on the iLO web interface Installed Firmware page.
        * The iLO web interface intermittently displays incorrect memory status after a system reset.
        * The iLO  RESTful API does not provide a method to get current cipher information.
        * The Server Power page stalls when loading the server power information.
        * Nothing happens when you click the Import button on the HPE SSO page.
        * Secure boot cannot be configured through the iLO RESTful API, even if the pending configuration is in UEFI mode.
        * The maximum available power is displayed incorrectly.
        * If the IML contains a maintenance note, the first attempt to clear the log fails.   
        * Certificate-based authentication returns a session URL with inconsistent case.
        * Onetimeboot and Continuousboot do not  take effect in iLOrest.
        * Virtual Media status is not displayed in the Java IRC.
        * The local client keyboard might get disabled when the Java IRC  is in use.
        * An iLO  Federation authentication error might occur when group names with unsupported characters are used in URLs without correct encoding.
        * An issue occurs when copying or restoring certificate mapping entries using fingerprints.
        * An iLO web interface error occurs after an installed certificate was deleted by using the iLO RESTful API.
        * An Internal Error occurs when HPONCFG for Linux is used with a server that uses the SuiteB security state.
        * SNMPv3 user details cannot be modified  through RIBCL.
        * A false positive "Insecure Cache Management Policy" issue is reported by some security scanners.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.17
changelog:
  -     This version adds support for the following features and enhancements:
      
        * iLO Amplifier Pack Server System Restore \- Use the Send Recovery Event button on the Firmware Verification page to send a recovery event to iLO Amplifier Pack. If iLO Amplifier Pack is configured to listen for system recovery events, this event causes iLO Amplifier Pack to initiate the system recovery process.  The system recovery process includes the installation of the System Recovery Set followed by reimaging the server operating system.
        * RESTful API updates: 
          * Added certificate authentication and validation for Virtual Media.
          * Added certificate authentication and validation for RESTful API events that support the iLO Amplifier Pack Server System Restore feature.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.17
changelog:
  -     The following issues are resolved in this version:
      
         SSH does not work correctly when iLO is configured to use the SuiteB
      security state.  
         Importing a certificate does not work correctly after the generation of a
      SuiteB-compliant CSR.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20
changelog:
  -     This version adds support for the following features and enhancements:
      
        * HTML5 Remote Console
        * Shared Network Port IPv6 support
        * Shared Network Port iLO Federation support
        * Ability to associate an SNMP alert destination with an SNMPv1 or SNMPv3 user
        * Enhanced firmware and software update interface: 
          * New Add to Queue pane
          * Remove All option for install sets, queued components, or components in the iLO Repository
          * Recovery Set update option during firmware update, iLO Repository upload, or install queue update
        * CAC Smartcard  authentication support for the Online Certificate Status Protocol (OCSP)
        * iLO RESTful API updates: 
          * NVMe drive properties
          * Remote Support configuration
          * Device Inventory
        * Support for eight SNMP trap destinations
        * SNMPv3 Inform notification support
        * Support for RSA-PSS certificate signatures
        * RSA cipher support in CNSA mode
        * Ability to disable device discovery on Device Inventory page
        * New Service Account option to support user accounts that are used as service accounts for supported applications


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20
changelog:
  -     The following issues are resolved in this version:
      
        * NVMe drive details are not displayed in the iLO web interface for HPE ProLiant XL190r Gen10 servers.
        * The system BIOS version is missing in AlertMail messages.
        * The IPMI Get Chassis Capabilities and Get Chassis Status commands do not reflect the Chassis Intrusion state.
        * Virtual Media devices are inaccessible when two virtual devices are mounted simultaneously.
        * Patched configuration file system.
        * The IPMI pre-watchdog-timeout interrupt does not occur when no watchdog action is selected.
        * Intermittent loss of network interface card (NIC) and drive detection (P408e-m controller) by BIOS on system boot up of HPE ProLiant BL460c servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30
changelog:
  -     This version adds support for the following features and enhancements:
      
        * Added support for new platforms: 
          * HPE ProLiant DL20 Gen10 Server
          * HPE ProLiant ML10 Gen10 Server  
        * Improved HTML5 IRC performance, including: 
          * Added virtual keys to improve the ability to send keyboard actions to the server.
          * Added the ability to configure the keyboard layout in the HTML5 IRC
          * Added Virtual Media support for local ISO and IMG files.
        * Firmware and software update enhancements: 
          * iLO users can now view, create, and delete maintenance windows.
          * A new check box allows users to clear the installation queue when initiating an install set.
          * Updated the iLO RESTful API and iLO web interface to report when a reboot is required after an installation task completes.
        * Each time iLO starts, it backs up the iLO configuration to the nonvolatile flash memory (NAND). If the SRAM is erased, the configuration is automatically restored.
        * Added iLO web interface support for Density Optimized Drive Zoning features on supported HPE Apollo products.
        * AlertMail now supports SSL (TLS) for secure email.
        * AlertMail now supports external SMTP mail servers.
        * Added an SNMP trap for when all host NICs are down.
        * Updated to OpenSSL-1.0.2u-fips-2.0.16.
        * Added the list of open source licenses to the login page.
        * Added an SNMP trap for when iLO is reset by IPMI watchdog.
        * Added Intelligent System Tuning features to the iLO web interface. From the iLO web interface, you can view the configured settings, configure Jitter Smoothing, and launch Intelligent Provisioning to configure Workload Matching and Core Boosting.
        * Improved Active Health System logging efficiency to prolong the NAND lifespan.
        * Added iLO health status to the Overview page. If the status is Degraded, this value is also displayed on the Login page.
        * Re-signed the Java IRC to extend the certificate expiration date.
        * Re-signed the .NET IRC to extend the certificate expiration date. 
          * With this enhancement, the .NET IRC requires version 4.5.1 or later of the .NET Framework.
        * Added the ability to remove an SSL certificate and regenerate the iLO self-signed certificate. 
          * Hewlett Packard Enterprise recommends that you install a CA signed certificate.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30
changelog:
  -     The following issues are resolved in this version:
      
        * Compute modules do not power on after restoring power to Frame.
        * When you use iLO Virtual Media to install an operating system, installation might fail when iLO is configured to use the Shared Network Port.
        * In rare cases, a server runs out of available SSH sessions because the sessions are not reclaimed when a client disconnects.
        * iLO 5 unexpectedly restored itself to the factory default settings when a user did not initiate the process.
        * When Auto Power-On is set to Always Power On or Restore Last Power State, the server might not power on after a cold reset.
        * iLO cannot display the HP Ethernet 1Gb 4-port 331i Adapter MAC address.
        * NVMe drive model numbers are incorrect or inconsistent.
        * Clearing the oemHPE_usercntxt## from the command line clears the value, even though error messages might be displayed.
        * Fixed Single Sign-On when in CNSA mode.
        * Added support for RSA-PSS certificate signatures.
      
      For the latest security bulletins and vulnerabilities, please visit:  
      https://support.hpe.com/hpesc/public/home  
      
      Please refer to the HPE Integrated Lights-Out 5 Security Technology Brief for
      the latest on security best practices at:  
      http://www.hpe.com/support/ilo5-security-en


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.35
changelog:
  -     This version adds support for the following features and enhancements:
      
        * VGA Port Detect Override--Controls how devices connected to the system video port are detected. Dynamic detection protects the system from abnormal port voltages. This setting is enabled by default, and can be used for troubleshooting cases when there is no video output to displays, KVM concentrators, or active dongles.
        * DHCP Client ID override via iLO RESTful API.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.35
changelog:
  -     The following issues are resolved in this version:
      
        * Fix for improper Smart Array error reported: Cache module board backup power failed.
        * Fixed where iLO may become unresponsive after ejecting virtual media.
      
      SECURITY FIXES:
      
      For the latest security bulletins and vulnerabilities, please visit:  
      <https://support.hpe.com/hpesc/public/home>  
      
        * Security Bulletin HPESBHF03866
      
      Security best practices:
      
      Please refer to the HPE Integrated Lights-Out 5 Security Technology Brief for
      the latest on security best practices at:  
      <http://www.hpe.com/support/ilo5-security-enn>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.37
changelog:
  -     The following issues are resolved in this version:
      
       \- Fix for "VGA Port Detect Override" to show video in all cases where
      monitors are installed.  
       \- Fix for intermittent file upload failures.  
       \- Fix for issues with Virtual Media in FIPS mode.  
       \- Fix for issues with simultaneous use of virtual DVD and floppy in FIPS
      mode.  
       \- Fix for USB floppy when used with ESXi 7 installation driver.  
       \- Fixed potential problem where iLO could continue to interact with system
      memory after it has been released by hpilo module.  
       \- Fix for erroneous reporting of disk drive overheating.  
       \- Fix for intermittent iLO communication error on HPE Apollo 2000.  
       \- Fix for potential RESTful API errors at boot with multiple NICs installed.  
       \- Fix to add iLO 5 NIC information into anonymous XML response.  
       \- Fixed false errors showing link lost on NICs when link never seen in IPMI.
      
      SECURITY FIXES:
      
       \- HPESBHF03894 - HPE iLO5 Local Bypass of Security Restrictions in Firmware
      Update


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.1.7
changelog:
  -     This product now supports Red Hat Enterprise Linux 7 Update 4.  
      This product now supports SUSE Linux Enterprise Server 12 SP3.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.1.7
changelog:
  -     This product corrects an issue where a prompt to save configuration changes is
      displayed when no changes have been made from the adapter's configuration
      menu.  
      This product addresses an issue where an adapter fails to boot to PXE with
      VLAN ID enabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.2.16
changelog:
  -      This product corrects an issue where a user sees a 'Submit Fail for Form:' error message when attempting to load the default (F7) adapter settings.
        * This product corrects an issue where the user is prompted to save changes when no adapter configuration settings have been modified.
        * This product corrects an issue where an adapter's branding information is lost when a non-English language is selected for the 'System Utilities' (F9) menu.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.7.3-1
changelog:
  -     This software now provides iSCSI and UMP firmware upgrade support.
      
      This software now provides an IPMI configuration command that allows IPMI to
      be enabled or disabled from the command line.
      
      This software now supports Red Hat Enterprise Linux 5 AS/ES for x86_64.
      
      This software contains the latest available firmware for the supported NICs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.0.4
changelog:
  -     Updated UMP firmware for HP NC371i Multifunction Adapters. With this firmware,
      UMP traffic no longer ceases when system is powered up from Vaux, eliminating
      the need to use the dedicated iLO port.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.0.9
changelog:
  -     Updated the installation of the option ROM on C-Class adapters so the option
      ROM executes correctly after being updated.
      
      Updated UMP firmware for HP NC373i Multifunction Adapters. With this firmware,
      UMP traffic no longer ceases when system is powered up from Vaux, eliminating
      the need to use the dedicated iLO port.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.1.0
changelog:
  -     This utility no longer causes HPSUM to inaccurately write "Bad device status"
      in the OPMAN trace log so the user should not expect to see this message
      during a successful upgrade.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.1.2
changelog:
  -     This software contains the latest available firmware for the supported NICs.
      
      This software now has the latest CLP and iSCSI images so the user has the
      capibility to perform Linux or Windows 2003 iSCSI installs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.1.7
changelog:
  -     This software now supports firmware updates for the following network
      adapters:
      
        * HP NC105i Integrated PCI Express Gigabit Server Adapter 
        * HP NC107i Integrated PCI Express Gigabit Server Adapter 
        * HP NC382i Integrated Dual Port Multifunction Gigabit Server Adapter 
        * HP NC382m Dual Port 1GbE Multifunction BL-c Adapter 
        * HP NC382T PCI Express Dual Port Gigabit Server Adapter 
        * HP NC532i Dual Port 10GbE Multifunction BL-c Adapter 
        * HP NC532m Dual Port 10GbE Multifunction BL-c Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.2.1
changelog:
  -     This component contains updated firmware images for the NC325m, NC326m and
      NC373m network adapters. The updated firmware images resolve an issue with
      enabling PXE.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.2.2
changelog:
  -     This component contains updated bootcode for the NC382T network adapter to
      resolve a boot issue on the DL785 server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.2.3
changelog:
  -     This component contains updated bootcode for the NC532i and NC532m network
      adapters. The updated bootcode includes Dynamic Control Channel (DCC) for
      Virtual Connect.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.2.4
changelog:
  -     This component contains updated IPMI firmware for the NC107i network adapter
      to resolve OS installation issues using PXE.
      
      This component contains updated firmware that resolves an issue on the NC532m
      where PXE boot would fail when connected to certain switches using the
      priority field in the VLAN ID.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.2.6
changelog:
  -     *Update Requirements:  
      **      Recommended: HP recommends that users should update to this firmware version at their earliest convenience.  
        
      **Problems Fixed:**  
            This component contains updated NCSI firmware for the NC382i to resolve an issue where VLAN tagged packets were being dropped when run with latest OEM router. This component also contains updated bootcode for the NC382i, NC382m, and NC382T. This bootcode is require for the new NCSI code.   
            This component contains updated bootcode for the NC532m and NC532i. This firmware will resolve an issue where some NC532 devices may not enumerate correctly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.2.6-2.1
changelog:
  -     This component no longer triggers an event that causes the DL100 series
      servers to hang on POST.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.2.7
changelog:
  -     This component contains updated bootcode for the NC382i/T/m.
      
      This component includes new management firmware the NC326i.
      
      This tool can now downgrade the firmware in silent mode when the "force"
      switch is used.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.3.0
changelog:
  -     The correct informational messages are now displayed when discovering the NIC
      firmware versions installed on the system.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.4.25
changelog:
  -     This software now supports firmware updates for the following network
      adapters:
      
        * HP Ethernet 1Gb 4-port 331FLR Adapter 
        * HP Ethernet 1Gb 4-port 331i Adapter 
        * HP Ethernet 1Gb 4-port 331T Adapter 
        * HP Flex-10 10Gb 2-port 530FLB Adapter 
        * HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter 
        * HP Flex-10 10Gb 2-port 530M Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.4.25-2.1
changelog:
  -     Updated PXE/MBA firmware for the 530FLB, 530M, and 530FLR to address a
      potential hang during PXE boot on a heavily loaded network.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.5.14
changelog:
  -     This software package now supports the following network adapters:
      
        * HP Ethernet 1Gb 2-port 330i Adapter
        * HP Ethernet 1Gb 2-port 332T Adapter
        * HP Ethernet 10Gb 2-port 530SFP+ Adapter
        
      This package now supports SUSE LINUX Enterprise Server 11 SP2.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.6.14
changelog:
  -     This software now supports the HP Ethernet 1Gb 4-port 331i-SPI Adapter.  
        
      This package now supports Red Hat Enterprise Linux 6 Update 3.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.7.20-2.1
changelog:
  -     This component contains an updated Managed Boot Agent (MBA) for the HP NC532m
      Dual Port 10GbE Multifunction BL-c Adapter which addresses an issue where the
      Media Access Control (MAC) address for port 1 incorrectly shows all zeroes.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.7.20-3.1
changelog:
  -     This component contains updated firmware for the following adapters:
      
        * HP Ethernet 1Gb 2-port 330i Adapter
        * HP Ethernet 1Gb 4-port 331FLR Adapter
        * HP Ethernet 1Gb 4-port 331i Adapter
        * HP Ethernet 1Gb 4-port 331i-SPI Adapter
        * HP Ethernet 1Gb 4-port 331T Adapter
        * HP Ethernet 1Gb 2-port 332i Adapter
        * HP Ethernet 1Gb 2-port 332T Adapter
        
      This firmware corrects a potential NMI which can occur under heavy network
      stress.  
        
        
      This component contains an updated Managed Boot Agent (MBA) for the HP NC532m
      Dual Port 10GbE Multifunction BL-c Adapter which addresses an issue where the
      Media Access Control (MAC) address for port 1 incorrectly shows all zeroes.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.9.21
changelog:
  -     This software now supports the following network adapters:  
      
        * HP Ethernet 10Gb 2-port 533FLR-T Adapter
        * HP FlexFabric 10Gb 2-port 534FLB Adapter
        * HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
        * HP FlexFabric 10Gb 2-port 534M Adapter
        * HP StoreFabric CN1100R Dual Port Converged Network Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.9.24
changelog:
  -     This component resolves an issue where the OS may fail to boot or hang during
      iSCSI boot when using multipath.  
        
      This component resolves an issue where the iSCSI Boot Firmware Table was not
      initialized correctly for the secondary interface if a cable was not attached.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.9.26
changelog:
  -     This FCoE firmware version addresses an FCoE ROM boot failure to establish
      connection with FCoE fabric in a certain configuration seen with version
      7.8.17.  
        
      This FCoE firmware prevents a slowdown in boot time (~8 secs) and a VLAN
      discovery failure caused by the discovery logic of the FCoE ROM.  
        
      This iSCSI firmware addresses an iSCSI ROM Challenge Handshake Authentication
      Protocol (CHAP) failure seen with version 7.8.24.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.9.27
changelog:
  -     This product addresses an issue where a firmware downgrade may fail when using
      the previously released smart component.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10.15-2.1
changelog:
  -     CCM:
      
        * This component addresses an issue where certain adapters may become non-functional when they are updated with the Comprehensive Configuration Management (CCM) firmware using this firmware update utility. This component now prevents landing of the CCM firmware on adapters that do not support CCM.
      
      FCoE/iSCSI:
      
        * A system hang seen during the early phase of storage ROM initialization on some platforms has been addressed.
        * The firmware has been updated to use indirect accesses to address a boot failure seen when large Base Address Register (BAR) is enabled in the system BIOS.
      
      Bootcode: 
      
        * This image addresses an issue where a 5719 chipset device reports "no firmware running" when an inbox driver is used.
      
      NCSI:
      
        * This image addresses an issue where a Keyboard, Video and Mouse (KVM) session times out when a power cycle loop is performed for a long duration on a system with a Broadcom 5717/5719 chipset device.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10.16
changelog:
  -     This component contains updated bootcode for Broadcom 5719 devices that
      addresses a PCIe link training issue.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10.20
changelog:
  -     This package contains updated Network Communications Services Interface (NCSI)
      firmware for Broadcom NX1 5719 devices that addresses an issue where devices
      with NCSI enabled do not correctly report link changes to the operating
      system.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.11.20
changelog:
  -     This product now supports the following network adapters:
      
        * HP FlexFabric 20Gb 2-port 630FLB Adapter
        * HP FlexFabric 20Gb 2-port 630M Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12.22
changelog:
  -     This product now supports the following network adapters:
      
        * HP Ethernet 1Gb 2-port 330i Adapter (22BD)
        * HP Ethernet 1Gb 4-port 331i Adapter (22BE)
        * HP FlexFabric 10Gb 2-port 536FLB Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.12.22
changelog:
  -     This component contains updated boot code for Broadcom 5719 chipset based
      adapters to correct an issue which results in the device disappearing from the
      list of PCIe devices after system boot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.13.5
changelog:
  -     The NX2 Unified Extensible Firmware Interface (UEFI) driver in this product no
      longer hangs when an invalid bandwidth value is entered in the NIC
      configuration menu under "System Configuration" on Gen 9 platforms.  
        
      The NX2 UEFI driver in this product no longer displays an unnecessary pop-up
      message regarding saving the settings when exiting the NIC configuration menu
      on Gen 9 platforms when no settings are changed.  
        
      The NX2 UEFI driver in this product no longer displays an unnecessary pop-up
      warning message when the user enters the NIC configuration menu under "System
      Configuration" on Gen 9 platforms with the HP Ethernet 10Gb 2-port 530T
      Adapter.  
        
      The bootcode in this product for 578xx devices now correctly reports thermal
      data.  
        
      This product addresses an issue where iSCSI boot fails when VLAN ID is enabled
      via Virtual Connect Manager's "iSCSI Boot Configuration" parameters.  
        
      This product addresses an issue where iSCSI boot fails when an adapter is
      configured to use the Dynamic Host Configuration Protocol (DHCP) Vendor ID via
      Virtual Connect Manager's "iSCSI Boot Configuration" parameters.  
        
      The updated iSCSI firmware addresses an issue where the iSCSI interface fails
      to acquire a Dynamic Host Configuration Protocol (DHCP) IP address from a
      server with a host name and root path longer than 32 characters.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.13.8
changelog:
  -     The Broadcom NX1 UEFI driver in this product now PXE boots correctly on
      certain OEM systems.  
        
      The Broadcom 578xx Management Firmware (MFW) in this product no longer causes
      the HP FlexFabric 10Gb 2-port 534FLB Adapter and HP FlexFabric 10Gb 2-port
      536FLB Adapter to report an incorrect temperature, resulting in a system
      shutdown due to a thermal trip signal.  
        
      The Broadcom 578xx Management Firmware (MFW) in this product addresses an
      issue where certain network switches fail to respond to adapters running the
      Fibre-Channel over Ethernet (FCoE) protocol.  
        
      The updated UEFI driver for Broadcom 578xx devices fixes an issue where the
      server can't PXE boot to Grub Shell.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.14.17
changelog:
  -     This product now supports Red Hat Enterprise Linux 6 Update 6.  
        
      This product now supports SUSE LINUX Enterprise Server 12.  
        
      This product contains updated NCSI firmware (v1.3.5) that increases the number
      of multicast MAC address filters that can be supported from 2 to 8.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.14.17-2.1
changelog:
  -     This product addresses an issue where FCoE connections can be lost when
      improving the synchronization of the Data Communication Channel (DCC) link
      status with the Virtual Connect module.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.14.18
changelog:
  -     This product addresses the following issues seen on HP FlexFabric 20Gb 2-port
      630FLB Adapter:
      
        * Fixes an issue where the Boot from SAN in Legacy mode fails (hang observed during OS boot) because the FCoE ROM doesn't correctly honor the link status set by the Virtual Connect Manager.
      
        * Fixes an issue where UEFI FCoE boot path sends false notification to MFW (Management Firmware) about the virtual function link change which eventually results in a deadlock with virtual link down.
      
        * Fixes an issue where the fallback Boot from SAN fails even though each port is mapped to different Virtual Connect Bays and only one of the bays is powered off.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.15.10
changelog:
  -     This product now supports only Broadcom NX1 devices. NX2 devices are now
      supported by "HP QLogic NX2 Online Firmware Upgrade Utility for Linux x86_64."
      
      This product now supports Red Hat Enterprise Linux 7 Update 1.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.15.10
changelog:
  -     This product addresses an issue where the sideband traffic on the second port
      stops after a system warm reboot when both ports are enabled for transmit and
      the first port is linked down.
      
      This product addresses an issue where the firmware update on a device fails
      when PXE is up to date but the UEFI driver needs an update.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.16.4
changelog:
  -     This product now supports the HP Ethernet 1 Gb 2-port 332i Adapter (22E8).
      
      This product now supports Red Hat Enterprise Linux 6 Update 7.
      
      This product now supports SUSE LINUX Enterprise Server 11 SP4.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.16.4-2.1
changelog:
  -     This product addresses an issue where Gen8 systems with a HP Ethernet 1Gb
      4-port 331i Adapter LOM can no longer PXE boot after a firmware update.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.16.6
changelog:
  -     This product addresses an Uncorrectable Machine Check Exception error reported
      in the Integrated Management Log in the iLO.
      
      This product addresses an issue where the IPv6 PXE boot entry may not show up
      in the 'One-Time Boot Menu' under the 'System Utilities' (F9 during POST).
      
      This product addresses an issue where the existing firmware present on the
      adapter is incorrectly reported.
      
      This product addresses an issue where the reported bootcode version is
      incorrect after the combo image is landed on the adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.17.6
changelog:
  -     This product addresses an issue where the server makes high speed fan noise
      after the PXE firmware on the adapter is updated to version 17.0.2.
      
      This product addresses an issue where an incorrect firmware version is
      reported when updating firmware on the HP Ethernet 1Gb 2-port 332i Adapter.
      
      This product addresses an issue where older smart components report an
      incorrect Bootcode version after the firmware on the adapter was originally
      updated using the component version 2.16.4 or later.
      
      This product addresses an issue where an error code 7 is reported when
      updating firmware on the HP Ethernet 1Gb 4-port 331i-SPI Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.18.15
changelog:
  -     This product addresses an issue where an adapter disappears when the system
      configuration settings are restored to defaults.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.19.6
changelog:
  -     This product addresses an issue where negative temperatures on the adapter are
      incorrectly displayed in Integrated Lights Out (iLO).  
      This product addresses an issue where an incorrect firmware image is landed on
      an adapter.  
      This product addresses an issue where an adapter's configuration menu doesn't
      correctly prompt for reboot after changes are made that require a reboot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20.7
changelog:
  -      This product corrects an issue where an adapter's configuration menu doesn't prompt for reboot after changes are made that require a reboot.
        * This firmware now correctly displays a progress bar information when updating the firmware via the 'Firmware Update' feature (under 'System Utilities->Embedded Applications').


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.21.3
changelog:
  -     This product addresses an issue where the NIC Serial Number for the HPE
      Ethernet 1Gb 4-port 331FLR Adapter is not displayed in AHS.
      
      The firmware in this product  addresses an issue where the "Reboot Required"
      icon is not highlighted after a NIC firmware update (via System
      Utilities->Embedded Application->Firmware Update) completes.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.2.6
changelog:
  -     This package now supports the HP Ethernet 10Gb 2-port 560SFP+ Adapter.  
        
      This package now supports Red Hat Enterprise Linux 6, Update 3.  
        
      The firmware utility in this package now supports command line options: '-e'
      (rewrite) and '-g' (downgrade).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.3.6
changelog:
  -     This component now supports the following network adapters:
      
        * HP Ethernet 1Gb 4-port 366FLR Adapter
        * HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
        * HP Ethernet 10Gb 2-port 560M Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.3.7
changelog:
  -     This component contains new firmware that resolves an intermittent issue where
      the option ROM does not load during POST and the NIC is not available for
      network boot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.4.21
changelog:
  -     This package now supports the following network adapters:
      
        * HP Ethernet 10Gb 2-port 561FLR-T Adapter
        * HP Ethernet 10Gb 2-port 561T Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.5.17
changelog:
  -     This software now supports the following network adapters:
      
        * HP Ethernet 1Gb 2-port 363i Adapter
        * HP Ethernet 1Gb 1-port 364i Adapter
        * HP Ethernet 1Gb 2-port 367i Adapter
        * HP Ethernet 10Gb 2-port 562i Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.5.17
changelog:
  -     This firmware addresses an issue where a Pre-Execution Environment (PXE) boot
      fails when the Spanning Tree Protocol is enabled on a network switch.  
        
      This firmware addresses a system hang seen with Product Development Kit Intel
      APITEST with PXE version 1.5.33.  
        
      This firmware addresses an issue where the Windows Deployment Services fail.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.5.19
changelog:
  -     This component addresses an issue which prevented correct operation on the HP
      Ethernet 1Gb 1-port 364i Adapter.  
        
      This component addresses an issue that resulted in sideband communication
      transmitting from the wrong port.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.6.11
changelog:
  -     The nvmupdate tool in this component has been updated to address an issue
      where the shared network port used by Integrated Lights Out (iLO) is not
      correctly enabled on port 1 on the HP Ethernet 10Gb 2-port 560FLR-SFP+
      Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.6.12
changelog:
  -      The firmware flash tool in this component has been updated to address an issue where the shared network port used by Integrated Lights Out (iLO) is not correctly enabled on port 1 on the HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter.
        * Fixes Wake On Lan issue seen with HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter.
        * This component addresses an issue described in the Customer Advisory #c04438541.
        * This component contains updated tools that resolve firmware installation issues caused by some EEPROM ID changes.
        * The updated firmware fixes an issue where the PXE boot agent does not load when Intel Boot Agent is set to "Try network first".


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.7.7
changelog:
  -     This product now supports Red Hat Enterprise Linux 6 Update 6.  
        
      This product now supports SUSE LINUX Enterprise Server 12.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.7.7
changelog:
  -     The firmware in this product addresses a Wake-on-LAN (WoL) issue seen with the
      HP Ethernet 10Gb 2-port560FLR-SFP+ Adapter.  
        
      This product addresses the issue described in Customer Advisory #c04438541.  
        
      The firmware in this product addresses an issue where port #1 for an HP
      Ethernet 1Gb 4-port 366FLR Adapter doesn't receive any IP traffic from a
      Dynamic Host Configuration Protocol (DHCP) server.  
        
      This product addresses an issue where firmware update fails on an HP ProLiant
      DL385p Gen8 server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.8.15
changelog:
  -     This product now supports the following network adapters:
      
        * HP Ethernet 1Gb 4-port 366T Adapter
        * HP Ethernet 10Gb 2-port 562SFLR-FP+ Adapter
        * HP Ethernet 10Gb 2-port 562SFP+ Adapter
      
      This product now supports Red Hat Enterprise Linux 7 Update 1.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.8.17
changelog:
  -     This product addresses a link flapping issue seen with the HP Ethernet 10Gb
      2-port 560FLB Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.8.18
changelog:
  -     This component contains updated tools that resolve firmware installation
      issues caused by some EEPROM ID changes.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.9.12
changelog:
  -     This product now supports Red Hat Enterprise Linux 6 Update 7.
      
      This product now supports SUSE LINUX Enterprise Server 11 SP4.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.10.8
changelog:
  -     This product addresses an issue where the temperature is incorrectly reported
      by the thermal sensors, causing the fans to run high.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.11.8
changelog:
  -     This product addresses an issue where a firmware update fails when executed on
      a system running Xen.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.11.12
changelog:
  -     This product addresses an issue where the system may reboot when a firmware
      update is attempted.
      
      This product addresses connectivity issues that may occur while booting
      mounted image when the shared network port is enabled on HPE FlexFabric 10Gb
      2-port 562 FLR-SFP+/SFP adapters.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.11.13
changelog:
  -     This product fixes link flapping issue reported on the HP Ethernet 10Gb 2-port
      560FLB Adapter.
      
      This product addresses a security issue reported on the following network
      adapters:
      
        * HP Ethernet 10Gb 2-port 562SFLR-FP+ Adapter
        * HP Ethernet 10Gb 2-port 562SFP+ Adapter
        * HPE Ethernet 10Gb 2-port 563i Adapter
      
      See the security bulletin HPSBHF03695 for more information.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.11.14
changelog:
  -     This firmware corrects an issue where the following network adapters may not
      appear in the system's boot order:
      
        * HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
        * HPE Ethernet 10Gb 2-port 562SFP+ Adapter
        * HPE Ethernet 10Gb 2-port 563i Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.13.12
changelog:
  -     This product now supports Red Hat Enterprise Linux 7 Update 4.  
      This product now supports SUSE Linux Enterprise Server 12 SP3.
      
      This product now supports the following network adapters:
      
        * HPE Ethernet 1Gb 2-port 368i Adapter
        * HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter
        * HPE Ethernet 1Gb 4-port 369i Adapter
        * HPE Ethernet 10Gb 2-port 562FLR-T Adapter
        * HPE Ethernet 10Gb 2-port 562T Adapter
        * HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter
        * HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.14.13
changelog:
  -      This product corrects a Wake-on-LAN (WoL) issue seen with the HP Ethernet 1Gb 2-port 361T Adapter.
        * This product corrects an issue where there is no VLAN function under Legacy mode on the HP Ethernet 1Gb 2-port 361T Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.14.14
changelog:
  -     This product addresses an issue where link flapping is seen when the 'HP
      Ethernet 10Gb 2-port 560FLB Adapter' is connected to 1Gb interfaces and
      operated at 1Gb speeds.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15.9
changelog:
  -     This product addresses a NIC VLAN ID issue seen in the NIC Human Interface
      Infrastructure (HII) menu when operating in UEFI mode.  
      This product addresses a teaming issue where the HPE Ethernet 10Gb 2-port 561T
      Adapter still shows connected on the switch after the NIC has been disabled.  
      This product addresses a link issue and a PXE issue seen with the HPE Ethernet
      10Gb 2-port 560FLB Adapter.  
      This product addresses a WOL issue seen with the HPE Ethernet 1Gb 4-port 366T
      Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.22
changelog:
  -     The firmware in this product addresses intermittent PCIe enumeration issues
      seen after warm/cold boot.
      
      The firmware in this product addresses a system crash seen when enabling NPAR
      with SRIOV enabled.
      
      The firmware in this product addresses an issue where a "NIC Initialization
      error" message is observed when PXE boot is attempted multiple times.
      
      The firmware in this product addresses an issue where the NCSI pass-through
      does not function when configured for DHCP IP.
      
      The firmware in this product addresses an issue where PXE boot fails in legacy
      boot mode.
      
      Ths firmware in this product addresses an issue where the system PXE boots
      when PXE boot is disabled on the port.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.1.29
changelog:
  -     This product now supports the following network adapters:
      
        * HPE Ethernet 10Gb 2-port 521T Adapter
        * HPE Ethernet 10Gb 2-port 522FLR-T Converged Network Adapter
        * HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter
        * HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter
        * HPE Synergy 6810C 25/50Gb Ethernet Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.2.14
changelog:
  -     This product addresses an issue where the Wake-On-Lan setting on the second
      port isn't correctly enabled when the network adapter's configuration settings
      are restored to default in the 'System Utilities' (F9 on POST) under the
      'System Configuration' menu.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.3.12
changelog:
  -      This product addresses an issue where the inlet temperature is incorrectly reported.
        * This product addresses an issue where the Wake-On-LAN setting is not properly set on the second port after the defaults are restored.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.4.24
changelog:
  -      This product corrects an issue where booting to Preboot eXecution Environment (PXE) may not work after applying the OneView server profile when the System ROM is set to 'Legacy BIOS Mode'.
        * This product addresses an issue where the FCoE boot parameters cannot be configured in the adapter's configuration menu (under 'System Utilities'->'System Configuration' menu) when OneView profile with connections set to 'manually managed' is applied to the system.
        * This product corrects an issue where certain settings/changes (CHAP, boot mode etc) in the OneView server profile are not reflected in the adapters' configuration menu (under 'System Utilities'->'System Configuration' menu) after applying the OneView server profile.
        * This product corrects an issue where the virtual World Wide Port Name(WWPN)/World Wide Node Name(WWNN) are not programmed properly when applying the OneView server profile.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.4.65
changelog:
  -     This product now supports SUSE Linux Enterprise Server 15.
      
      This product now supports the following network adapters:
      
        * HPE Synergy 4820C 10/25Gb Converged Network Adapter
        * HPE StoreFabric CN1200R-T Converged Network Adapter
        * HPE StoreFabric CN1300R Converged Network Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.15.19
changelog:
  -     This firmware provides a new option in the NIC ROM-Based Setup Utility (RBSU)
      menu (HP's UEFI System Utilities - F9 at POST) to allow enabling and disabling
      of HP shared memory features.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.16.21
changelog:
  -     This product addresses an issue where the Smartlink function does not work
      properly when System ROM's 'Boot Mode' is in 'Legacy BIOS Mode'.
      
      This product addresses the following issues seen with 'HP FlexFabric 20Gb
      2-port 630FLB Adapter':
      
         Fixes an issue where the Boot from SAN in Legacy mode fails (hang observed
      during OS boot) because the FCoE ROM doesn't correctly honor the link status
      set by the Virtual Connect Manager.
      
         Fixes an issue where UEFI FCoE boot path sends false notification to MFW
      (Management Firmware) about the virtual function link change which eventually
      results in a deadlock with virtual link down.
      
         Fixes an issue where the fallback Boot from SAN fails even though each
      port is mapped to different Virtual Connect Bays and only one of the bays is
      powered off.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.17.16
changelog:
  -     This product now supports the HPE StoreFabric CN1100R-T Converged Network
      Adapter.
      
      This product now provides the capability of converting an 'HP FlexFabric 10Gb
      2-port 533FLR-T Adapter' into a Converged Network Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.17.16
changelog:
  -     This product corrects an issue where Boot from SAN in Legacy mode fails (hang
      observed during OS boot) because the FCoE ROM doesn't correctly honor the link
      status set by the Virtual Connect Manager.
      
      This product corrects an issue where UEFI FCoE boot path sends incorrect
      notification to Management Firmware (MFW) about a virtual function link
      change, which eventually results in a deadlock with virtual link down.
      
      This product corrects an issue where the fallback Boot from SAN fails even
      though each port is mapped to a different Virtual Connect Bay and only one of
      the bays is powered off.
      
      This product corrects an issue where the Smartlink function does not work
      properly in FCoE SAN boot environment when server 'Boot Mode' is 'Legacy BIOS
      Mode.'
      
      This product corrects an issue where the FCoE UEFI driver is unable to find
      LUNs when multiple FCoE VLANs are enabled.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.18.1
changelog:
  -     This product addresses an issue where the iSCSI and FCoE configuration menus
      are displayed after NPAR is enabled.
      
      This product addresses an issue where expected network devices don't appear in
      the Legacy BIOS Boot Order menu.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.18.44
changelog:
  -     This product now supports the following network adapters:
      
        * HPE Synergy 3820C 10/20Gb Converged Network Adapter
        * HPE Synergy 10Gb 2-port 2820C Converged Network Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.19.22
changelog:
  -     This product addresses an issue where the system boots to an FCoE target when
      the FCoE ports are marked as "Not Bootable" in the OneView profile.
      
      This product addresses an issue booting to an iSCSI target fails when the
      target is configured with a sixteen character long mutual Challenge Handshake
      Authentication Protocol (CHAP) secret.
      
      This product addresses an issue where a network adapter's configuration
      settings are not reset to defaults when the adapter is moved to a different
      slot and the system is booted in 'Legacy BIOS Mode'.
      
      This product addresses an issue where the system's power-on self-test (POST)
      duration is extended when a single interconnect module (ICM) is installed in
      the enclosure and used to configure the logical interconnect group (LIG).
      
      This product addresses an issue where the configuration settings of the HPE
      Synergy 3820C 10/20Gb Converged Network Adapter revert to the default values
      after a system restart.
      
      This product addresses an issue where booting to an iSCSI target fails
      intermittently across multiple platform reboots.
      
      This product addresses an issue where OneView displays the downlink port state
      as "Linked" for a network adapter that is disabled in the OS.
      
      This product addresses an issue where a firmware update fails with a
      "segfault" error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20.4
changelog:
  -     This product addresses an issue where a network adapter cannot be re-added to
      a NIC bond after being removed from the bond.
      
      This product addresses an issue where adapters are not reporting the correct
      temperature in the Integrated Lights Out (iLO) webpage.
      
      This product addresses an issue where the value set for Maximum Transmission
      Unit (MTU) setting wasn't preserved and instead gets reverted back to default
      value on system reboot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.20.5
changelog:
  -     This product addresses an issue where the users see the error message "Server
      profile settings conflict with the server hardware configuration" in OneView
      when applying the Server Profile to a server with VMware (ESXi 6.x).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.21.15
changelog:
  -      The default 'Boot Retry Count' has been increased from 'No Retry' to '6.'
        * Configuration settings are now localized.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.21.15
changelog:
  -      This product corrects an issue where the Maximum Transmission Unit (MTU) setting value reverts to the default value after a system reboot.
        * This product corrects an issue where an adapter's configuration menu doesn't correctly prompt for reboot after changes are made that require a reboot.
        * This product corrects a high latency issue seen during high ping activity.
        * This product corrects an issue where OneView displays the error message "Server profile settings conflict with the server hardware configuration" when applying the server profile to a server running VMware ESXi 6.x.
        * This product corrects an issue where the iSCSI settings configured in the OneView Profile are not correctly applied to the adapter.
        * This product corrects an issue where an error message is seen when entering the 'MBA Configuration Menu' under the adapter's settings (under the 'System Utilities->System Configuration' menu) and attempting to restore the defaults. 
        * This product corrects an issue where the iSCSI multipath does not work correctly in 'Legacy BIOS Mode'.
        * This product corrects an issue where the virtual World Wide Port Name(WWPN)/World Wide Node Name(WWNN) are not programmed properly when applying the OneView Server Profile.
        * This product addresses an issue where the user sees the error message "Unable to find a FibreChannel boot source for server" in OneView when applying the Server Profile with Fibre Channel network paths configured.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.22.15
changelog:
  -     This product corrects an issue where users may see an error message when they
      attempt to restore the adapter's configuration settings to defaults by
      pressing F7 under the 'System Utilities->System Configuration' menu.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20-2.1
changelog:
  -     Note: After running this component to update the NVMe Backplane PIC firmware,
      a server reboot is required for iLO to display the new NVMe Backplane PIC
      firmware version on iLO's Firmware Information page


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20-2.1
changelog:
  -     Added support for the following Gen10 servers:
      
        * HPE ProLiant XL190r Gen10 Server
        * HPE ProLiant XL170r Gen10 Server
        * HPE ProLiant DL180 Gen10 Server
        * HPE ProLiant DL160 Gen10 Server
        * HPE ProLiant DL580 Gen10 Server
        * HPE ProLiant ML350 Gen10 Server
        * HPE ProLiant XL450 Gen10 Server
        * HPE ProLiant DL120 Gen10 Server


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20-4.1
changelog:
  -     The following support was added in version 1.20(C). No new features were added
      in version 1.20(D).
      
        * Added support for the HPE ProLiant XL270d Gen10 Server


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20-4.1
changelog:
  -     Firmware Package version 1.20(D) addressed the following issue:
      
        * When using OneView, attempts to upgrade firmware from version 1.18 to 1.20 failed.
      
      Note: If the target device was previously updated to firmware version 1.20, it
      is not necessary to apply firmware update 1.20(D).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.2
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial version of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.4
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      Integrated Lights-Out 5 (iLO 5) Firmware version 1.15 and System ROM version
      1.20 or later
      
      **Enhancements/New Features:**
      
      Added support for Dynamic Power Capping. For proper operation, please ensure
      that Integrated Lights-Out 5 (iLO 5) Firmware version 1.15 and System ROM
      version 1.20 or later are updated on the server.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.7-2.1
changelog:
  -     *Important Notes:**  
        
      Ver. 1.0.7(B) addresses a minor issue in the online flashing mechanism. The
      actual firmware contained within version 1.0.7(B) did not change as compared
      to version 1.0.7 and therefore it is not necessary to upgrade if version 1.0.7
      has already been installed.  
        
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial version of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addresses an issue in which the minimum power capping value was incorrectly
      being calculated on certain systems. This fix increases the accuracy of the
      minimum capping value set during POST.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9-3.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.9 (C) contains support for new server products and a change to the
      Firmware RPM install command name from "cpqsetup" to "hpsetup".  It is
      functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with
      Revision C if a previous component revision was used to upgrade the firmware
      to ver. 1.0.9.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addresses an issue in which the minimum power capping value was incorrectly
      being calculated on certain systems. This fix increases the accuracy of the
      minimum capping value set during POST.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9-4.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.9(D) contains updates to the component packaging and is functionally
      equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision D if a
      previous component Revision was used to upgrade the firmware to version 1.0.9.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addresses an issue in which the minimum power capping value was incorrectly
      being calculated on certain systems. This fix increases the accuracy of the
      minimum capping value set during POST.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9-6.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.9 (F) contains support for new server products.  It is functionally
      equivalent to ver. 1.0.9.  It is not necessary to upgrade with Revision F if a
      previous component revision was used to upgrade the firmware to ver. 1.0.9.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addresses an issue in which the minimum power capping value was incorrectly
      being calculated on certain systems. This fix increases the accuracy of the
      minimum capping value set during POST.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9-7.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.9 (G) contains a change to the Firmware RPM file name.  It is
      functionally equivalent to ver. 1.0.9.  It is not necessary to upgrade with
      Revision G if a previous component revision was used to upgrade the firmware
      to ver. 1.0.9.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addresses an issue in which the minimum power capping value was incorrectly
      being calculated on certain systems. This fix increases the accuracy of the
      minimum capping value set during POST.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9-9.1
changelog:
  -     *Important Notes:**
      
      Ver. 1.0.9(I) contains updates to the component packaging and is functionally
      equivalent to ver. 1.0.9. It is not necessary to upgrade with Revision I if a
      previous component Revision was used to upgrade the firmware to version 1.0.9.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addresses an issue in which the minimum power capping value was incorrectly
      being calculated on certain systems. This fix increases the accuracy of the
      minimum capping value set during POST.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.00-1.1
changelog:
  -     *Note:** If version 2.00 was previously installed, then it is not necessary to upgrade to version 2.00 (A).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.31
changelog:
  -      On rare occasions, incorrect data may be read or written while a controller is rebuilding a drive.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.31
changelog:
  -     *Enhancements/New Features:**
      
        * Firmware now reads the max link rate from the backplane NVRAM and sets the rate accordingly. The expander firmware will adjust the SAS links to the appropriate speed based on the backplane type. The firmware will not try to force slower backplanes to higher link rates.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.31
changelog:
  -     *Problems Fixed:**
      
        * Data Integrity issue while controller performed an array rebuild.
        * Disabled Edge-Buffering to address a rare data integrity issue seen with a drive that had bad blocks.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.80
changelog:
  -      A rare race condition in a system with SAS and SATA drives, where SATA drives were not discovered during server power-on.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.07
changelog:
  -      While performing a firmware upgrade on an HP 12Gb/s SAS Expander card, an issue infrequently occurred that caused the card to become unusable. HP 12Gb/s SAS Expander firmware version 2.07 resolved this issue.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.09
changelog:
  -      The HPE 12Gb/s SAS Expander firmware version 2.09 resolves an issue where an incorrect SAS address was returned by the Device Identification Inquiry for Vital Product Data page. As a result, applications using this information may report incorrect data about the storage system topology.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.10
changelog:
  -      Rebranded the controller information from HP 12G SAS Expander card to HPE 12G SAS Expander card.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.17
changelog:
  -      SATA hard disk drives connected to the HPE 12Gb/s SAS Expander card may not be detected when cold booting a HPE ProLiant server with a HPE Smart Array SR Gen10 controller


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.02
changelog:
  -      Changed the Enclosure's Target and LUN address to the appropriate unique values. Previously these addresses would conflict with the SATA drive in bay #1 which interfered with software defined storage solutions such as Storage Spaces Direct.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.21
changelog:
  -     The following issues are resolved in version 4.21:
      
        * Expander would reset due to excessive LED commands
        * Some SATA drives were not initially detected due to spin up time taking too long. Drives would then appear later as a hot-added drive.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.00-2.1
changelog:
  -      Improved integration with Smart Update Manager.
      
      Note: Upgrading to version 1.00(B) is not necessary if the Apollo 2000 SAS
      Expander was previously updated to version 1.00.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.03
changelog:
  -      Please un-plug and re-plug the power cord to the server for firmware upgrade from version 1.03 or earlier to take effect.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.04
changelog:
  -      HP Apollo 45xx Gen9 Backplane Expander firmware version 1.04 provides enhanced functionality so that upgrades from version 1.04 to a later version no longer requires a power cycle/cold reboot of the server after the firmware is flashed.  
      NOTE: Upgrading from a firmware version older than version 1.04 to version
      1.04 or later still requires a power cycle/cold reboot to complete the upgrade
      process.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.73
changelog:
  -      When the server hardware inventory was displayed in the Device Manager, the NVMe drives were not included in the lists.
      
      Firmware version 1.73 allows all NVMe supported drives to be recognized and
      displayed in the server hardware inventory lists.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.73-2.1
changelog:
  -     *Problems Fixed in version 1.73 (B):**
      
        * The component installer did not detect the HPE Express Bay Enablement Switch Card, when it was configured in an HP ProLiant DL580 Gen9 Server, and would not proceed with firmware update.
      
      **Problems Fixed in version 1.73:**
      
        * When the server hardware inventory was displayed in the Device Manager, the NVMe drives were not included in the lists.
      
      Firmware version 1.73 allows all NVMe supported drives to be recognized and
      displayed in the server hardware inventory lists.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.73-3.1
changelog:
  -     *Problems Fixed in version 1.73 (C):**
      
        * During component installation on a system configured with NVIDIA Tesla M2090 GPU, an uncorrectable PCIe error might occur.
      
      **Problems Fixed in version 1.73 (B):**
      
        * The component installer did not detect the HPE Express Bay Enablement Switch Card, when it was configured in an HP ProLiant DL580 Gen9 Server, and would not proceed with firmware update.
      
      **Problems Fixed in version 1.73:**
      
        * When the server hardware inventory was displayed in the Device Manager, the NVMe drives were not included in the lists.
      
      Firmware version 1.73 allows all NVMe supported drives to be recognized and
      displayed in the server hardware inventory lists.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.73-4.1
changelog:
  -      Updated to support Service Pack for ProLiant version 2017.07.0
      
                **Note:** If any version 1.73 was previously installed, then it is not necessary to upgrade to version 1.73 (D).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.16
changelog:
  -     *Problems Fixed:**
      
        * Corrects PHY Link Error messages being posted in IML when attached to the following drives:
      
      **HP Model Number -**
      
      EF0300FATFD
      
      EF0450FATFE
      
      EF0600FATFF
      
      EG0300FBDBR
      
      EG0300FBVFL
      
      EG0450FBDBT
      
      EG0450FBVFM
      
      EG0600FBDBU
      
      EG0600FBVFP
      
      EG0900FBVFQ
      
      EG1200FCVBQ
      
      EG1200FDNJT
      
      EH0072FARWC
      
      EH0146FARWD
      
      EH0300JDYTH
      
      EH0450JDYTK
      
      EH0600JDYTL
      
      EH0600JDYTN
      
      EO0200JDVFA
      
      EO0400JDVFB
      
      EO0800JDVFC
      
      MB2000EBUCF
      
      MB2000ECWLP
      
      MB2000FBUCL
      
      MB2000FCZGH
      
      MB2000GBUPB
      
      MB2000GCWLT
      
      MB3000EBUCH
      
      MB3000ECWLQ
      
      MB3000FBUCN
      
      MB3000FCZGK
      
      MB3000GBUCK
      
      MB3000GCWLU
      
      MB4000ECWLR
      
      MB4000FCZGL
      
      MB4000GCWLV
      
      MB6000FEDAU
      
      MB6000GEBTP
      
      MB6000GEFFV
      
      MM1000FECVH
      
      MO0200JDVET
      
      MO0400JDVEU
      
      MO0800JDVEV


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.18
changelog:
  -     *Problems Fixed:**
      
        * Unable to change cache read/write ratio following a cold boot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34
changelog:
  -     *Problems Fixed:**
      
        * When a server was running and power was removed and then re-applied to an HP D3600/D3700, the controller would cease to function (POST Lockup 0xAB).
        * Following a reboot, SATA drives in Bay 1 and Bay 2 of an HP D3600/D3700 may fail to be discovered (leading to any configured LUN's using these bays to go into interim recovery mode).
        * When running HP SmartCache and doing repeated blackout/power loss write cache backups, the controller would cease to function (POST Lockup 0x13).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34-2.1
changelog:
  -     *Problems Fixed:**
      
        * When a server was running and power was removed and then re-applied to an HP D6000, the controller may cease to function (POST Lockup 0xAB).
        * Following a reboot, SATA drives in Bay 1 and Bay 2 of an HP D6000 may fail to be discovered, leading to any configured LUN's using these bays to go into interim recovery mode.
        * If a power-outage or brownout occurs while running HP SmartCache, the controller may cease to function on the following boot (POST Lockup 0x13).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.14
changelog:
  -     *Enhancements/New Features:**
      
        * Servers now power up faster due to improvements in the UEFI controller driver.
        * Logical volume transformations are allowed on controllers without data preservation.
        * Drives can now be hot-added in a zoned configuration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.14
changelog:
  -     *Problems Fixed:**
      
        * Critical issue for all UEFI systems using 2.2 TB or greater volumes configured with GPT partitions. For additional information please refer to the customer advisory # [c04602001](http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c04602001)
        * When rebuilding a logical volume greater than 2TB in size, the controller might cease to function (POST Lockup 0xE0). Controller would report a POST Lockup 0xE0 error and cease to function, when the following conditions were met:
      
                       1) Encryption enabled and a re-key operation was in progress.  
                       2) While IO was in progress, physical drives failed in an Advanced Data Guarding (RAID6 or RAID60) volume, which caused the volume to go into a degraded state.  
                       3) Degraded Mode Performance Optimization was enabled via HP Smart Storage Administrator.
      
        * If a power outage or brownout occurred while running a volume expansion, the controller might cease to function on the following boot (POST Lockup 0x13).
        * HP D2600/D2700 Disk Enclosures might not show the correct box number on the LED display.
        * Controller might become unresponsive if a drive was re-inserted into encrypted LUN while performing IO on it.
        * When running IO with encryption turned on in remote mode and a local key cache enabled, changing the master key might result in encryption being disabled on the next power up.
        * Controller allowed encryption key changes even with locked volumes.
        * A key restore from an Enterprise Secure Key Manager could take a long time for large configurations.
        * Users were unable to install Red Hat Enterprise Linux 6 Update 5 to a logical volume on an HP P2000 MSA Array System if both an HP H241 and H240 Smart Host Bus Adapter were present in the system.
        * When HP D3700 Disk Enclosures were connected to an HP H240 Smart Host Bus Adapter, the maximum number of enclosures displayed in the boot menu was five, although a maximum of eight enclosures were supported.
        * When a volume expansion or encryption re-key operation was performed, and if multiple power losses or brownouts occurred, data might become inaccessible (POST Message 1769).
        * POST messages 1764, 1768, 1784, 1786, 1787, 1789, 1831 have been updated and/or corrected.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.52
changelog:
  -      Improved performance by limiting Surface Scan frequency to once every 14 days
        * Increased performance for tape drives when using variable block sizes
        * Updated type and quantity of information logged to the Active Health System log
        * Added support for the following: 
          * Check for drive firmware update needed on hot-plugged devices
          * Non-disruptive online drive firmware updates for supported SATA drives
          * Microsoft Storage Spaces
          * HP MSA 1040 external RAID enclosure
          * Third party external RAID enclosures


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.52
changelog:
  -      If an HP Smart Array controller is configured with HP SmartCache, upgrade the controller to firmware version 2.52 to avoid a possible lockup (POST lockup 0x13)
        * System fans might run at maximum speed
        * System might be unable to boot from volumes on HP MSA 2040 SAS enclosures
        * Physical drives might be repeated in the UEFI one-time boot menu
        * Installation of a custom Linux ISO might fail to boot with "error: can't allocate initrd"
        * Controller might stop responding at power up with encryption enabled (POST Lockup 0x13)
        * System might stop responding when sending high numbers of non-NCQ commands to SATA drives behind H-series cards (POST Lockup 0x13)
        * System might stop responding following the hot-removal of a drive from a fault tolerant volume (POST Lockup 0xAB)
        * System might be unable to downgrade controller firmware via UEFI flashing tool
        * If a Smart Array controller with firmware version 2.14 was running in HBA mode and the drives that were connected were previously configured in a LUN, an 1832 POST message was not displayed. Refer to Customer Advisory [c04635824](http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04635824) for additional information about this issue.
        * Certain POST messages displayed although the error conditions were not present. The Smart Array Controller firmware has been hardened to reduce the likelihood of these false error messages occurring: 
          * POST 1784, which indicated a logical drive failure
          * POST 1795, which indicated a write-back-cache error and disabled cache


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00
changelog:
  -      Support booting from controllers in HBA-mode when running with legacy BIOS
      
        * Improved controller performance following a cold boot of the server


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00
changelog:
  -      Controller might stop responding in the following situations:
      
          * During reboot or at power-up, if multiple Raw Device Mappings (RDM's) are configured under VMware
      
          * During reboot or at power-up, if multiple logical volumes are queued for rebuild, expansion, or transformation
      
          * When flashing SATA drive firmware on a system running a supported Windows OS, if a drive had previously been removed or failed (POST Lockup 0x13)
      
        * Drives reported as overheating when not above temperature limits


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.52
changelog:
  -      Controller might stop responding when drives were reporting errors (POST Lockup 0x13)
        * Controller in HBA mode might stop responding if a command to a SATA drive timed out (POST Lockup 0xAB)
        * Detection of all direct-attached physical drives might fail if a single drive did not spin up
        * A physical drive configured as a spare drive might indicate predictive failure sooner than expected
        * Erroneous Critical message displayed in ADU: "Box Failure Due To Primary Io Module"


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.56
changelog:
  -      Controller might stop responding when drives were reporting errors (POST Lockup 0x13)
        * Controller in HBA mode might stop responding if a command to a SATA drive timed out (POST Lockup 0xAB)
        * Detection of all direct-attached physical drives might fail if a single drive did not spin up
        * A physical drive configured as a spare drive might indicate predictive failure sooner than expected
        * Erroneous Critical message displayed in ADU: "Box Failure Due To Primary Io Module"
        * With SLES11 SP4 installed, the system may fail to boot to the OS after updating to 3.52 SmartArray controller firmware


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.02
changelog:
  -      Improved controller performance.
      
        * Servers now power up faster due to improvements in the UEFI controller driver.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.02
changelog:
  -      Flash-backed write cache might fail on embedded controllers following an unexpected power down event.
      
        * Detection of all physical drives behind the same expander might fail if a single drive did not spin up.
      
        * Server power up might take an extended amount of time if failed drives are present behind a controller running in HBA mode.
      
        * SATA drives might go offline during runtime.
      
        * Logical volumes might be disabled after flashing enclosure SEP device firmware.
      
        * Controller might stop responding when running IO with an attached Shared Storage enclosure (POST Lockup 0xAB).
      
        * Controller might stop responding when running Linux and an abort command is issued by the host.
      
        * An intermittent aborted IO request with attached SATA drives resulted in a LUN (Logical Unit Number) reset.
      
        * Incorrectly displayed drive failure message in HPESSA for rebuilding SSD.
      
        * Incorrectly displayed 0% progress message in HPESSA for sanitizing SSD.
      
        * Reduced likelihood of POST Lockup 0x13 occurrence due to intermittent memory errors.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.02-2.1
changelog:
  -     *Problems Fixed in 4.02:**
      
        * Flash-backed write cache might fail on embedded controllers following an unexpected power down event.
        * Detection of all physical drives behind the same expander might fail if a single drive did not spin up.
      
        * Server power up might take an extended amount of time if failed drives are present behind a controller running in HBA mode.
      
        * SATA drives might go offline during runtime.
      
        * Logical volumes might be disabled after flashing enclosure SEP device firmware.
      
        * Controller might stop responding when running IO with an attached Shared Storage enclosure (POST Lockup 0xAB).
      
        * Controller might stop responding when running Linux and an abort command is issued by the host.
      
        * An intermittent aborted IO request with attached SATA drives resulted in a LUN (Logical Unit Number) reset.
      
        * Incorrectly displayed drive failure message in HPESSA for rebuilding SSD.
      
        * Incorrectly displayed 0% progress message in HPESSA for sanitizing SSD.
      
        * Reduced likelihood of POST Lockup 0x13 occurrence due to intermittent memory errors.
      
      **Problems Fixed in 4.02 (B):**
      
        * Component might fail to install firmware in a system configured with a shared storage enclosure. The following message would be reported - "Device appears more than once in tree."


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.02-3.1
changelog:
  -      The 4.02 (C) component will perform a deep power cycle after flashing the CPLD image to eliminate the need to manually remove power from the system for the new CPLD to take effect.
        * Improved controller performance.
      
        * Servers now power up faster due to improvements in the UEFI controller driver.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.08
changelog:
  -      P741m controller missing the embedded SmartCache license key.
      
        * System might stop responding in response to a rare error (POST Lockup 0x13).
      
        * Drives might not appear as HPE authentic drives when used in a zoning configuration.
      
        * Deferred drive firmware flashing might hang at POST with some models of drives.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.52
changelog:
  -      System fans might go to 100% if connected drives were spun down.
        * SATA SSD's were incorrectly marked as worn out.
        * Poor performance on the first logical volume with drive write cache enabled.
        * Controller might hang or show as failed in the IML with 20+ SATA SSD's configured in a RAID6 volume with Smart Path enabled and IO running.
        * System might hang at POST following a reboot.
        * System might lockup at POST following a reboot (POST Lockup 0x13)
        * Duplicate SCSI devices shown in Linux after issuing a bus rescan command.
        * Recovered paths were not restored when using a SmartArray P742m controller connected to an external drive enclosure and a shared storage external enclosure.
        * Smart Array P741m controller missing the embedded SmartCache license key.
        * System might stop responding in response to a rare error (POST Lockup 0x13).
        * Drives might not appear as HPE authentic drives when used in a zoning configuration.
        * Deferred drive firmware flashing might hang at POST with some models of drives.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.58
changelog:
  -      Fixes
      
      \- Kernel core dump using dump might not complete in Linux when using Smart
      Array Gen9 firmware version 4.52.
      
      \- Intermittent memory errors might cause the controller to stop responding.
      (POST Lockup 0x13)
      
      \- Physical slot location of SATA drives might not be returned correctly from
      an inquiry command.
      
      \- Drive LED's might be illuminated for the wrong drive and/or only illuminate
      momentarily.
      
      \- System fans might go to 100% if connected drives are spun down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.60
changelog:
  -      P840/4GB controllers might fail data retention following an unexpected power event (POST message 1793 - Data in Write-Back Cache has been Lost)
        * Multiple direct attach SATA drives within a cluster might show the same WWN.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04
changelog:
  -     HPE strongly recommends that this firmware update be performed in an offline
      environment.  If this firmware update is performed online, ensure a graceful
      shutdown or restart is performed in order to flush all data from the
      controller cache before the new firmware is activated.  Abruptly rebooting the
      system while there is data in cache might result in data loss.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04
changelog:
  -      Added support to enable setting the controller boot order in Legacy BIOS Mode.
        * Enhanced debug capabilities when running in HBA-mode and connected to an expander configuration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04
changelog:
  -      Kernel core dump using kdump might not complete in Linux when using Smart Array Gen9 firmware version 4.52.
        * Intermittent memory errors might cause the controller to stop responding. (POST Lockup 0x13)
        * System might stop responding if a parity error is found during surface scan of a RAID6 volume. (POST Lockup 0x13)
        * In rare cases, the controller might stop responding while running IO without displaying a lockup code.
        * Non-Maskable Interrupt (NMI) might occur on systems with a Windows OS and HPE Gen9 Smart Array or Smart HBA adapters and performing continuous reboot testing.
        * System IO might stop when using certain 6TiB and 8TiB SAS drives in a dual-path configuration with an HPE Gen9 Smart Array or Smart HBA adapter in HBA-mode, possibly resulting in an OS crash.
        * Physical slot location of SATA drives might not be returned correctly when using Microsoft Storage Spaces Direct (S2D).
        * Multiple direct attach SATA drives within a cluster might show the same World Wide Name (WWN) when using Microsoft Storage Spaces Direct (S2D).
        * Drive LED's might be illuminated for the wrong drive and/or only illuminate momentarily when connected to an expander configuration with an HPE Gen9 Smart Array or Smart HBA adapter in HBA-mode.
        * Controllers using a 4GB cache module might fail data retention following an unexpected power event. (POST message 1793 - Data in Write-Back Cache has been Lost)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04-1.1
changelog:
  -      Added support to enable setting the controller boot order in Legacy BIOS Mode.
        * Enhanced debug capabilities when running in HBA-mode and connected to an expander configuration.
        * Now installs on system running VMware vSphere 6.5 operation system.
      
                Note: if controller previously updated to firmware version 5.04, it is not necessary to upgrade to version 5.40(A).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04-1.1
changelog:
  -      Kernel core dump using kdump might not complete in Linux when using Smart Array Gen9 firmware version 4.52.
        * Intermittent memory errors might cause the controller to stop responding. (POST Lockup 0x13)
        * System might stop responding if a parity error is found during surface scan of a RAID6 volume. (POST Lockup 0x13)
        * In rare cases, the controller might stop responding while running IO without displaying a lockup code.
        * Non-Maskable Interrupt (NMI) might occur on systems with a Windows OS and HPE Gen9 Smart Array or Smart HBA adapters and performing continuous reboot testing.
        * System IO might stop when using certain 6TiB and 8TiB SAS drives in a dual-path configuration with an HPE Gen9 Smart Array or Smart HBA adapter in HBA-mode, possibly resulting in an OS crash.
        * Physical slot location of SATA drives might not be returned correctly when using Microsoft Storage Spaces Direct (S2D).
        * Multiple direct attach SATA drives within a cluster might show the same World Wide Name (WWN) when using Microsoft Storage Spaces Direct (S2D).
        * Drive LED's might be illuminated for the wrong drive and/or only illuminate momentarily when connected to an expander configuration with an HPE Gen9 Smart Array or Smart HBA adapter in HBA-mode.
        * Controllers using a 4GB cache module might fail data retention following an unexpected power event. (POST message 1793 - Data in Write-Back Cache has been Lost)
        * System fans might go to 100% if connected drives were spun down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.52
changelog:
  -      Controller cache module might be marked as permanently disabled if the Smart Storage Battery is removed or failed while the system is online, even if SSA was previously used to enable write caching without a backup power source.
        * SATA drives might not be presented to the host in a Synergy system with a D3940 Disk Enclosure.
        * A hot-inserted replacement drive might show as a predictive failure if the original drive was identified as a predictive failure.
        * Port/box/bay identifier for physical drives might have an incorrect box number in zoned or multi-path configurations.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 6.02
changelog:
  -      Controller might hang at POST following an unexpected power event if there was data in the controller cache.
        * Controller might stop responding when running I/O to SATA drives. (POST Lockup 0x13)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 6.06
changelog:
  -      Under the following conditions, the controller might stop responding: 
          * During POST following an unexpected power event if there was data in the controller cache.
          * When running I/O to SATA drives. (POST Lockup 0x13)
          * When using a RAID configuration with strip size of 1024KiB. (POST Lockup 0x13)
          * When a WRITE SAME command is sent with a buffer size greater than 512 bytes. (POST Lockup 0x13)
        * In a multi-path environment with nested expanders, the active path to a device might be incorrect following a path failure or restoration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 6.30
changelog:
  -     Fixes the following issues:
      
        * DDR cache could be randomly disabled after several boots
        * The controller could become unresponsive while in HBA mode during the creation of a partition/file system
      
      .


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 6.60
changelog:
  -      Issue where the QueryAsynchronousEvent could potentially provide incorrect response data
        * Issue where the Cache could potentially get disable after several reboots


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.04-2.1
changelog:
  -      Customers who already have firmware version 1.04 installed do not need to update to 1.04 (B).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.04-2.1
changelog:
  -     *Version 1.04 (B)**
      
        * Added support for new models of HPE ProLiant servers: 
          * DL120 Gen10
      
      **Version 1.04**
      
        * Initial firmware release for HPE P/E-Class SR Gen10 controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34
changelog:
  -      Support for ATA Sanitize Freeze/Antifreeze Lock.
        * Ability to select boot controller in Legacy BIOS mode with multiple controllers installed.
        * Updated Hard Drive Carrier LED behavior for the HPE ProLiant XL450 Gen10 Server.
        * Ability to set rebuild priorities via the RESTful management interface.
        * Supported settings - High, MediumHigh, Medium, Low


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34
changelog:
  -      Controller might stop responding while handling a drive error.  (POST Lockup 0x27006)
        * Controller might stop responding after a drive hot-removal or hot-insertion.  (POST Lockup codes 0x1EA or 0x15010)
        * Controller might stop responding during a volume expansion or rekey.  (POST Lockup code 0x1E30)
        * Controller might stop responding while performing heavy writes to a RAID 0 or RAID 1 logical drive that has a flash backed write cache enabled.  (POST Lockup 0x1BC0)
        * Various scenarios where drive LEDs might not be displayed correctly.
        * Drives might not be detected after a cold boot.
        * A hot-inserted drive might be immediately reported as failed.
        * A failed or charging HPE Smart Storage Battery might be reported as "missing" in SSA and iLO.
        * The RESTful management interface might be unable to detect physical drives or make configuration changes to the controller.
        * Option to enable "No Battery Write Cache" in SSA is not available if an HPE Smart Storage Battery is not installed.
        * Customer specified read/write controller cache ratio is not honored if "No Battery Write Cache" is enabled.
        * Controller cache might be displayed as temporarily disabled following an unexpected shutdown and subsequent reboot.
        * Unable to modify the controller cache read/write ratio following an unexpected shutdown and subsequent reboot.
        * The controller cache might become disabled when running VMware ESXi 6.0 if the controller and guest OS are configured to use PCI pass-through.
        * If multiple logical volumes are present on the same array, and one of the volumes is rebuilding, the others might be incorrectly marked as failed.
        * A drive at index 0 might incorrectly display as rebuilding if a logical volume on the controller is currently rebuilding.
        * System might hang during power-up or appear unresponsive during runtime if a logical volume composed of SSD's is created or rebuilding.
        * Negotiated link rate for drives might not be correct.
        * Storage enclosure information for direct attached drives might not be returned correctly in Windows.
        * The HPE SmartCache feature was not available by default on the P816i-a SR Gen10 controller.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34-2.1
changelog:
  -     *Note:** If version 1.34 was previously installed, then it is not necessary to upgrade to version 1.34 (B).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60
changelog:
  -      Increased SmartCache maximum logical volume size.
        * Added support for SmartCache in UEFI configuration tools.
        * Added the ability to control drive write cache settings.
        * Added the ability to select the drive erase pattern.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.60
changelog:
  -      Connectivity to HPE D6020 disk enclosures might be lost if connected to multiple servers.
        * In rare cases, data could become unavailable on a RAID 6 (ADG) volume during a rebuild or parity consistency check.
        * Inability to configure unassigned drives if a failed RAID volume was present.
        * After multiple reboots, unassigned drives might be erroneously assigned as spares for configured RAID volumes.
        * System might continuously reboot after splitting a mirrored volume.
        * Volume transformation might fail or not resume after a system reboot.
        * Maximum command queue depth for SATA drives was limited.
        * Controller might stop responding: 
          * During power up device discovery. (POST Lockup 0x1ABD or 0x20227)
          * If multiple completions are received for an IO command. (POST Lockup 0x1BE0)
          * If a drive enclosure is power cycled while IO is running. (POST Lockup 0x1C50 or 0x27006)
          * If a drive enclosure is power cycled while a drive is sanitizing. (POST Lockup 0x1E30)
          * When attempting to modify the controller cache settings while IO is running. (POST Lockup 0x1E30)
          * If a drive failed. (POST Lockup 0x27006)
          * When adding or removing drives from a RAID 5 or RAID 50 volume during a rebuild. (POST Lockup 0xFFFFF001)
          * During POST prior to loading an operating system.
          * When Unrecoverable Read Errors (URE's) are found on drives.
          * When deleting volumes while a rebuild is occurring and URE's and found.
          * Following completion of Rapid Parity Initialization (RPI) of a new RAID volume.
          * During a volume transformation.
        * A drive undergoing RPI might be presented to the operating system.
        * Controller slot ID might be shown incorrectly in management tools.
        * Incorrect drive bay numbers might be shown in a dual domain configuration.
        * Drive sanitize might report incorrect status information.
        * Status of the Smart Storage Battery might be reported incorrectly.
        * Incorrect POST message 1831 indicating loss of SmartCache data.
        * Incorrect text in POST message 1786.
        * Various scenarios where drive LEDs might not be displayed correctly.
        * The RESTful management interface might fail when attempting to: 
          * Change drive write cache configuration.
          * Configure a new RAID volume.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.65
changelog:
  -      System might stop responding at POST and fail to load an OS. This issue is more likely to occur if System BIOS version is 1.40 or later. However, systems running older BIOS versions could experience this issue also.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.0.8.0
changelog:
  -     Customers who wish to support the HP Smart Array P721m or the HP D6000 Disk
      Enclosure with the HP 6Gb SAS BL Switch must ensure that the HP 6Gb SAS BL
      Switch Firmware is at 3.0.8.0 or greater.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.0.8.0
changelog:
  -     ***Enhancements/New Features:****
      
        * Added context sensitive help in GUI to better describe High Performance Connection.
        * Added support for: 
          * HP Smart Array P721m.
          * HP D6000 Disk Enclosures.
        * HP Serial Attached SCSI (SAS): 
          * Added support to detect signal integrity issues between SAS switch and Disk Enclosures.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.0.8.0
changelog:
  -     *Firmware Dependency:**  
      The devices listed below require minimum FW deliverables with HP Storage
      Manager version 3.0.8.0
      
      Device Minimum Version
      
        * HP D2600\D2700 Disk Enclosure 0134
        * HP 600 Modular Disk System 3.44
        * HP P2000 Modular Smart Array TS230P06
        * HP Smart Array P711m\P712m 5.32
      
      **Problems Fixed**:****
      
        * Clock in SAS switch now reports local time, determined by Time Zone setting in Blade Enclosure.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.1.3.0
changelog:
  -     *Firmware Dependency:**  
           The devices listed below require minimum FW deliverables with HP Storage Manager version 3.1.3.0
      
           Device Minimum Version
      
        * HP D2600\D2700 Disk Enclosure 0147
        * HP 600 Modular Disk System 3.60
        * HP P2000 Modular Smart Array TS230P06
        * HP Smart Array P711m\P712m 5.70
      **Problems Fixed:**  
           Firmware 3.1.3.0 resolved the following issues:   
      
        * After flashing and resetting a D6000 enclosure, servers might not discover the enclosure for an extended period of time.
        * Upon replacement, a new switch might not be able to zone some of the devices.
        * Customer might not be able to download diagnostic logs.
        * Onboard Administrator (OA) sometimes alternated the status of the switch between Ok and Degraded.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.5.5.0
changelog:
  -     ***Firmware Dependency:****  
           The devices listed below require minimum FW deliverables with HP Storage Manager version 3.5.5.0:
      
        * **Device, Minimum Recommended Version**
        * HP D2600/D2700 Disk Enclosure, 0147
        * HP 600 Modular Disk System, 3.60
        * HP D6000 Disk Enclosure, 2.38
        * HP P2000 MSA Array System, TS230P06
        * HP Smart Array P711m/P712m Controller, 5.70
        * HP Smart Array P721m Controller, 3.54
      **Problems Fixed:**  
           Firmware 3.5.5.0 resolved the following issues: 
      
        * The folder "/var/log/messages" was not cleaned up correctly.
        * A newly hot-plugged blade server might not have displayed in Virtual SAS Manager (VSM) GUI and CLI.
        * Under rare circumstances, rebooting servers might have caused loss of paths to the drives.
        * Under rare circumstances, VSM GUI and CLI might become unresponsive after flashing and resetting the switch.
        * iLO might not have been accessible for long time on servers if multiple switches were booted up at the same time.
        * If a storage enclosure failed or was removed, or drives were lost, VSM might not have reported a hot removal.
        * When a SAS cable was connected or disconnected on a port, false DWORD errors might have been reported.
        * Some errors might not have been indicated by the LEDs on the switch ports.
        * A newly added server configured with an HP 1210m controller could not detect MDS600 storage enclosure.
        * After updating a storage enclosure firmware, the success message was not aligned properly in VSM.
        * While creating a new zonegroup, a message displayed that indicated the existence of a duplicate zonegroup.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.0.1.0
changelog:
  -     *Enhancements/New Features:**  
      
        * Added support for the HP MSA 2040 Storage System.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.0.1.0
changelog:
  -     ***Firmware Dependency:** **
      
           The devices listed below require minimum FW deliverables with HP Storage Manager version 4.0.1.0:
      
      **Device, Minimum Recommended Version**
      
        * HP D2600/D2700 Disk Enclosure, 0147
        * HP 600 Modular Disk System, 3.60
        * HP D6000 Disk Enclosure, 2.38
        * HP P2000 MSA Array System, TS230P06
        * HP Smart Array P711m/P712m Controller, 5.70
        * HP Smart Array P721m Controller, 3.54
      **Problems Fixed:**  
      
        * Fixed issue in which the "Create and Assign Zone Group" operation did not display an error message if the required zone group name was blank.
        * Fixed a rare issue where repeatedly rebooting the switch may cause some drives in the storage enclosure to not be detected.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.1.1.0
changelog:
  -     *Problems Fixed:**  
      The following issues are now resolved:
      
        * If the switch was assigned a static IP address using the Onboard Administrator EBIPA feature, then the switch might generate continuous Cold Start SNMP traps and overfill logs.
        * A storage enclosure flash operation might fail when run from Virtual Storage Manager (VSM) CLI while the GUI was open.
        * Link rate of a disk was incorrectly displayed in VSM GUI and CLI.
        * In rare cases, multiple resets of a switch would cause the Smart Array to lockup 0xAB.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.1.1.0-2.1
changelog:
  -      **Customers who already installed firmware version 4.1.1.0 do not need to update to 4.1.1.0(B).**


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.1.1.0-2.1
changelog:
  -     *Enhancements/New Features for FW version 4.1.1.0(B):**
      
        * Added component support for x64 operating systems.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.2.1.0
changelog:
  -      When a HP 6Gb SAS BL Switch  is configured with a very large number of physical drive bays (such as, 400 or more) and/or a large number of zone groups (such as, 16 or more), the switch manager GUI may not be able to load the configuration and show enclosure information.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.2.2.0
changelog:
  -      Firmware was changed to make it more robust and resilient to handle possible unresponsiveness due to a potential deadlock between multiple processes. If deadlock was to occur, it might cause an inability to establish an SSH session with the switch.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.02_10-21-2017
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the AMD Input-Output Memory Management Unit (IOMMU)
      incorrectly blocks PCIe traffic to system memory space just below 1TB that may
      result in an unexpected server reset or Microsoft Windows Blue Screen of Death
      (BSOD) with an IML entry of PCIe device error.
      
      Addressed an issue where the system may fail to boot after setting the Maximum
      Memory Bus Frequency to 1066 MHz or 1333 MHz.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.04_12-12-2017
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Updated the AMD processor microcode to the latest version.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.06_02-01-2018
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue with rare occurrences of unpredictable system behavior.
      This issue is NOT unique to HPE servers and would impact any systems using AMD
      EPYC 7000 Series processors that do not contain a work-around for this issue.
      Note: this does not address any security vulnerability mitigations.
      
      Addressed a rare issue where a system may become nonresponsive. This issue is
      addressed by updating to the latest AMD microcode. The issue is NOT unique to
      HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_03-09-2018
changelog:
  -     Added support for 128GB Load Reduced DIMMs (LRDIMM).
      
      Added support for NVMe hot plug through the HPE SmartDrive Carrier.
      
      Added support for the optional HPE Gen10 Chassis Intrusion Security Kit.
      
      Added a new System Utilities option for Memory Interleave Mode. This allows a
      system to be configured for no interleave, channel, die, or socket interleave
      when a system has the appropriate memory installed.
      
      Added a new System Utilities option to enable/disable the L1 Stream HW
      Prefetcher and the L2 Stream Prefetcher. Some workloads may have performance
      improvement by disabling these features.
      
      Added new Storage Information page to the System Information section of System
      Utilities.
      
      Added a new BIOS/Platform Configuration (RBSU) Thermal Configuration option
      for Enhanced CPU Cooling. When running certain processor intensive workloads,
      this option can provide additional cooling to the processors which can result
      in improved performance.
      
      Added a new System Utilities option for Embedded Diagnostics. To take
      advantage of this feature, the user must also update Intelligent Provisioning
      to version 3.10 or later.
      
      Added support for the Integrated Lights-Out (iLO) virtual wheel mouse
      functionality in the BIOS System Utilities application. This feature also
      requires iLO firmware version 1.20 or later for proper support.
      
      Updated the RESTful API HPE BIOS Attribute Registry resources to match the
      latest BIOS/Platform Configuration options.
      
      Updated the language translations (non-English modes) for System Utilities.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_03-09-2018
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the system would power on immediately after powering
      off when using VMware.
      
      Addressed an issue where configuring the Memory Refresh Rate to 2x Refresh
      would not function and the system would continue to operate at 1x Refresh.
      
      Addressed an issue where the UEFI Boot Order would not get reset to a default
      value when loading a default configuration. This issue does not impact systems
      configured in Legacy Boot Mode.
      
      Addressed an issue where the Embedded Serial Port option could not be properly
      configured through the RESTful Interface.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22_04-16-2018
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed the Fallout and Masterkey vulnerabilities with AMD EPYC 7000 Series
      processors which were reported by researchers with CTS Labs. This System ROM
      update includes updated firmware from AMD to fully mitigate these
      vulnerabilities. Per AMD, no other mitigations are required, and these
      mitigations should not impact performance. These issues are not unique to HPE
      servers and would impact any servers using AMD EPYC 7000 Series processors.
      Note: Even though this server is not exposed to the Masterkey vulnerability
      due to HPE's Silicon Root of Trust functionality, this System ROM includes the
      mitigations for this vulnerability. https://community.amd.com/community/amd-
      corporate/blog/2018/03/21/initial-amd-technical-assessment-of-cts-labs-
      research.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_06-07-2018
changelog:
  -     Added support for the latest VMware vSphere Secure Boot Certificate.
      
      Added a new BIOS/Platform Configuration (RBSU) Memory Controller Interleaving
      menu. This option allows disabling memory controller interleaving which may
      improve memory performance for systems configured with an unbalanced memory
      configuration.
      
      Updated the RESTful API HPE BIOS Attribute Registry resources to match the
      latest BIOS/Platform Configuration options.
      
      Updated the language translations (non-English modes) for System Utilities.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_06-07-2018
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where systems with 1 TB or more of memory installed may
      have memory resources assigned incorrectly resulting in a kernel panic or an
      IOMMU reported error.
      
      Addressed an issue where the Embedded Diagnostics may not launch properly when
      the UEFI POST Discovery Mode option is set to Force Fast Discovery.
      
      Addressed an issue where the Integrated Management Log (IML) Viewer in the
      System Utilities menu may become unresponsive when launched.
      
      Addressed an issue where the HPE Dual SD Card USB Module may not boot properly
      when the UEFI POST Discovery Mode option is set to Force Fast Discovery.
      
      Addressed an issue where the Trusted Platform Module (TPM) Firmware update may
      not complete properly when the TPM is configured for TPM 2.0 Mode. This issue
      does not impact systems configured with a TPM operating in TPM 1.2 mode.
      
      Addressed an issue where the system may not be able to boot to Intelligent
      Provisioning when a third party USB Key was installed in one of the server USB
      Ports. This issue was seen with a specific USB Key and has not been seen with
      other devices.
      
      Addressed an issue where Integrated Lights-Out (iLO) Virtual Media may not
      boot properly when the UEFI POST Discovery Mode option is set to Force Full
      Discovery.
      
      Addressed an issue where a system configured with the internal SD Card
      disabled from BIOS/Platform Configuration (RBSU) and an HPE Dual SD card
      installed would not boot from the HPE Dual SD card USB Module when configured
      in Legacy Boot Mode. This issue does not impact systems configured in UEFI
      Boot Mode.
      
      Addressed an issue where a system configured with an optional HPE CN1200E-T
      adapter would not boot properly when configured in Legacy Boot Mode. This
      issue does not impact systems configured in UEFI Boot Mode.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.34_10-02-2018
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue with rare occurrences of unpredictable system behavior.
      This issue is NOT unique to HPE servers and would impact any systems using AMD
      EPYC 7000 Series processors.
      
      Addressed an issue with NVMe drives becoming unavailable to an operating
      system when updating the backplane firmware.
      
      Addressed a rare issue where NVMe drives may not be available to an operating
      system when installing two or more NVMe drives simultaneously.
      
      Addressed an issue with the RBSU setting for AMD Core Performance Boost not
      being correctly applied in all instances.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.2
changelog:
  - ENHANCEMENTS
  - Add support for HP ProLiant DL160 G6 Server, HP ProLiant DL180 G6 Server, and HP ProLiant ML150 G6 Server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - FIXES
  - Fixed an issue where running multiple instances of .hplog -i' may cause more than 90% CPU utilization. 
  - Fixed an issue where the servers with large amount of memory may ASR during memory initialization. 
  - Fixed an issue where the hpasmlited was not notifying the agents of memory events on HP ProLiant G6 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.6
changelog:
  - ENHANCEMENTS
  - Enhanced the hp-health init script to identify the multi-chassis ProLiant 100 series servers.

  - FIXES
  - Fixed the hpasmcli -s .show dimm. command to prevent isolated occurrences of segmentation fault.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - hpasmlited now supports long IML messages. 
  - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. 

  - FIXES
  - Fixed the following issues: 
         1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 
         2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 
         3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2)  broadcast storm occurs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.1
changelog:
  - FIXES
  - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un  responsive due to network storm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.2
changelog:
  - FIXES
  - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera  ture threshold and improperly shut the system down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. 
  - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such  as SNMP agents like cmasm2d from hp-snmp-agents. 
  - Added 64-bit hpbootcfg utility.

  - FIXES
  - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. 
  - Fix POSIX-compliancy issue with initscript. 
  - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu   tdowns may take an extended amount of time.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when   the system is in stress.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.0.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant Gen9 Servers.

  - FIXES
  - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet.


author: HPE Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.5.0
changelog:
  - ENHANCEMENTS

  - FIXES
  - iLO hpasmlited daemon crash after 2 iLO resets loops.
  - hpasmcli command fails to read the embedded NIC status shows as UNKNOWN.
  - Error logs seen in service hp-asrd status.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.0.7-10
changelog:
  * Wed Nov 27 2013 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.0.7-4
   - Fixed igb compilation issues with upstream 3.10 Linux Kernel
   - Changed how driver update rx packet stats, to include additional packet types
   - Add support for freeing q_vectors via RCU

   - Add support for OEM Powerville-based SKUs (Severity: Medium)


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.2.17-2
changelog:
  - Added RHEL 7.1 support
   - Fixes a Tx Unit Hang on Network Adapters based on Intel 82576 chipset(NC362i) with RSS > 1


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.3.2-7
changelog:
  - Added SLES12SP1 support
   - Added RHEL 7.2 support
   - Fix queue allocation method to accomodate changing during runtime
   - Use skb_vlan_tag_* functions instead of old name vlan_tx_tag
   - This driver addresses an issue where the link speed reported by the HPE Active Health System (AHS) is incorrect.
   - This driver can now correctly change the queue allocation method during runtime.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.3-1
changelog:
  - Added RHEL 6.8 support
  - Fix the issue of getting crash dump when loading igb module(modprobe igb)
  - Fix unable to disable the offload property in rhel6u6


changelog:
  - Added SLES12SP2 support
  - Added RHEL 7.3 support

author:
  HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.7-8[rhel6u9], 5.3.5.7-1[For other OSs]


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.15-7.sles15sp0
changelog:
  - This driver fixes the issue of Spectre/Meltdown.
  - Fixed build on updated kernels of SLES12SP2
  - Added SLES15 support.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - ENHANCEMENTS
  - Added support for HP 6GB Serial Attached SCSI (SAS) hard drives. 
  - Added support for Intel ICH10 SATA IDE controller. 
  - Added support for HP NC362i Integrated Dual Port Gigabit Server Adapter. 
  - Added support for NetXen and HP NC-Series Intel e1000e Driver to send the traps. 
  - Added support for multi-board chassis product name and ID. 
  - Updated cmasm2d polling cycle to reduce system workload. 
  - Added the performance agents (cmaperfd).

  - FIXES
  - Fixed an issue where Linux event daemon reported RAID 1 inconsistency events. 
  - Fixed an issue where cmaidad agents send bad request commands to HP P700m Smart Array controller.
  - Fixed an issue with inconsistent data by setting Monitor and performance data buffers to zero before issuing ioctls to HP S  mart Array B110i SATA raid controller. 
  - Fixed an issue where HP Smart Array B110i SATA raid controller was displayed twice as HP Smart Array B110i SATA raid contro  ller and standard IDE controller. 
  - Fixed an issue where incorrect PCA Part number and system ID details sent in trap email. 
  - Fixed an issue where agent crashed when multiple VLANs are created and link up/down events are generated. 
  - Fixed an issue with displaying HP BL p-Class rack data in the System Management HomePage. 
  - Fixed an issue where cmahealthd sends the 6064 trap correctly when correctable memory errors are occurred. 
  - Fixed an issue where System Management Homepage correctly displays the FB DDR3 DIMM type information. 
  - Fixed an issue on HP ProLiant DL320 G6 server where the 6018 trap is not sent correctly when the temperature sensors are ov  erheated. 
  - Fixed the customer issue to use bond IP while sending traps if bondX is chosen as param in cma.conf.  
  - Fixed problem with cmarackd startup.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information   if the power supply supports error reporting. 
  - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. 
  - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. 
  - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. 
  - Updated the SIM event severity to .informational. after the secure erase is completed. 
  - Added support for HP NC362i Integrated Dual Port. 

  - FIXES
  - The cmapeerd agent logs the error .sendto() failed. to cma.log file. 
  - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. 
  - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. 
  - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. 
  - The Part Number displayed incorrectly. 
  - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. 
  - The System Id displayed incorrectly on the System Management Homepage (SMH). 
  - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. 
  - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). 
  - The multipath status was displayed as "unknown" when a drive failed. 
  - The failed logical drive status displayed incorrectly during an array move, expansion or shrink.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant  G7 Servers. 
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Included a document called  HP_SNMP_Trap_Guide.txt  that  describes the Linux SNMP trap ID messages generated by the agent 
  - Improvements to distribution identification including more consistent output and increased support for community and region  al   distributions. 
  - Added support for Solid State Drives. 
  - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/  MSA2324sa when co  nnected to HP SC08Ge Host Bus Adapter.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
       .	HP NC542m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP StorageWorks CN1000E Dual Port Converged Network Adapter 
       .	HP NC550m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter 
       .	HP NC551i Dual Port FlexFabric 10Gb Network Adapter 
       .	HP NC362i Integrated Dual Port Gigabit Server Adapter 
       .	HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter 

  - FIXES
  - Modified the 6064 trap implementation to reflect the correct error. 
  - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. 
  - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. 
  - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. 
  - Modified the script to get the NIC ports details from /sys/class/net. 
  - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat  ion instead of subsytem device information.  
  - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. 
  - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section.  
  - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. 
  - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H  Pcmanic.pp).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
         . HP NC551m Dual Port FlexFabric 10Gb Adapter 
         . HP NC551i Dual Port FlexFabric 10Gb Adapter 
         . HP NC365T 4-port Ethernet Server Adapter 
         . HP NC543i 10Gb 2-port  4X Flex-10  QDR Server Adapter 
         . HP NC553m 10Gb 2 port FlexFabric Converged Network  Adapter 
         . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC552SFP 2-port 10Gb Server Adapter 
         . HP StorageWorks CN1000Q Dual Port Converged Network Adapter 
         . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter    

  - FIXES
  - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. 
  - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o  utput to /dev/null. 
  - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. 
  - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.6.0
changelog:
  - ENHANCEMENTS
  - Added support for the MIBs in the Power Supply Table.
  - Added support for the MIB that specifies the version of Insight Management Agents running on the system.
  - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter.

  - FIXES
  - Addressed the tape drive not being displayed on the SMH on few configurations.
  - Displayed the placement correctly for the failed drive after reboot.
  - On Cmax, net-snmp displayed duplicate registration message on the syslog.
  - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. 
  - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. 
  - Added support to report USB key/SD card information. 
  - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. 
  - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". 
  - Added Physical Disk Temperature support.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.0.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant Gen9 Servers.

  - FIXES
  - cmafcad daemon appears to cause segmentation fault.
  - cmastdeqd daemon appears to cause segmentation fault when removing USB key.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.5.0
changelog:
  - FIXES
  - Cmahostd does not ignore nfs4 mount points.
  - cmahostd triggers NFS auto-mounting and resulted in performance problem.
  - Files in directories under /var/spool/compaq/hpasm/registry/ have SGID bit set removed.


author: Prashant Sreedharan <prashant@broadcom.com> - 1.0.14
changelog:
  - CQ73669: No support for 5717C0 devid (Severity: Minor)
  - CQ73746: tg3sd fails to run on RH7.0 (Severity: Minor)
  - hp-tg3sd-x.x.x.rpm fails to install on SLES11sp3 (Severity: Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> - 1.0.19
changelog:
  - CTRL-20577: tg3sd does not run under RHEL 7.2 (Severity: Minor)
  - CTRL-20998: 330i Network information missing in AHS (Severity: Minor)


author: Rajeshwari <stsd-ailsa@hp.com> 2.2.0-2
changelog:
  - Extension of -w option to include more iLO configuration
  - Fixed an issue where previous version of hponcfg failed to support older iLO Channel Interface drivers


author: Rajeshwari <stsd-ailsa@hp.com> 3.0.0-1
changelog:
  - Support for iLO3, iLO3 identification
  - Fixed an issue related to dynamic linking of hponcfg with libcpqci.so to resolve rdp related issue.


author: Sivakumar A <sivakumar.alagumalai@hp.com> 4.2.0-0
changelog:
  - v4.2.0 is mainly targeted for iLO4 1.30, iLO3 1.60 and iLO2 2.20
  - Created 32 bit and 64 bit RPM Packages to load shared library from hp-helth agent as libcpqci.so (in case of 32bit OS) and libcpqci64.so (in case of 64bit OS)


author: Naveen N <naveen.n2@hpe.com> 5.4.0-0
changelog:
  - Changes include to select correct libssl.so file when multiple Openssl installed (32-bit and 64-bit)


author: Hewlett-Packard Development Company, L.P. 7.1.0
changelog:
  - Improved trust mode during upgrade
   - Fixed group configuration management during Replicate Agents Settings (Severity: Serious)
   - Improved SMH service management
   - Fixed PHP files to avoid crash (Severity: Serious)
   - Improved webapp configuration files
   - Fixed SMH supporting DLLs to avoid version conflicts (Severity: Serious)
   - updated properties of SMH setup file
   - Updated secured handling of HTTP response
   - Updated Libxml2 to version 2.7.8
   - Updated PHP to version 5.3.10
   - Updated Curl library to version 7.24.0
   - Updated OpenSSL to version 1.0.0h
   - Updated SMH service runs with managed privileges
   - Enable support of Windows 2008 R2 Sp1 - Server Core
   - Enable support of Windows Server 8 (Beta)
   - Enable support of Windows Multipoint Server 2011 for x64
   - Enable support of Microsoft Windows Small Business Server 2011 for x64, Standard and Essentials
   - Updated usability of IP restrictions with SMH Command Line Interface
   - Updated information provided on webapp availability & loading statistics
   - Added support for Firefox 9.0 & 10.0

   * Thu Oct 13 2011 Hewlett-Packard Development Company, L.P. 7.0.0
   - Fixed SMH improperly displayed an invalid certificate warning when restarted, even on a fresh install. (Severity: Medium)
   - Added a command line option to modify the local and state information in the SMH PKCS (Public-Key Cryptography Standards) data
   - Added secured handling of HTTP request and response
   - Added support for Firefox 6.0, 7.0, 8.0 and Internet Explorer 9.0
   - clarified the log messages
   - Improved handling of command Line Interface options
   - Improved handling of IP fields
   - Improved handling of memory resources
   - Improved handling of revoked trusted certificate
   - Improved handling of SMH configuration file and settings
   - Improved CLI options, for easier management of SMH configurations
   - Updated the HTTP links
   - Updated Apache to version 2.2.21
   - Updated Curl library to version 7.21.7
   - Updated OpenSSL to version 1.0.0e
   - Updated PHP to version 5.3.8


author: Hewlett-Packard Development Company, L.P. 7.1.1
changelog:
  - On some Non-English Windows Operating Systems, user is not able to login into SMH 7.1.0. This version will solve this problem (Severity: Critical)
   - Improved security features of PHP (Severity: Critical)


author: Hewlett-Packard Development Company, L.P. 7.1.2
changelog:
  - Improved security features
   - Improved logging on few Operating Systems
   - Enable support of Red Hat Client 5.8
   - Updated OpenSSL to version 1.0.1c (Severity: Critical)
   - Updated PHP to version 5.3.14 (Severity: Critical)
   - Improvement in RPM packaging


author: Hewlett-Packard Development Company, L.P. 7.2.0
changelog:
  - Updated Apache to version 2.4.3 (Severity: Critical)
   - Improved logging on few Operating Systems
   - Improvement in Certificate management
   - Added support for Firefox ESR 17.0 and Internet Explorer 10.0
   - Enable support for Transport Layer Security (TLS) protocol 1.1 / 1.2
   - Improved User Interface for Online Help
   - Improved CLI options for easier management of SMH configurations
   - Secured handling of HTTP communication


author: Hewlett-Packard Development Company, L.P. 7.2.2
changelog:
  - Updated the following components
     PHP to version 5.4.11
     Curl to version 7.28.1
   - Enable support of SUSE Linux Enterprise Server 11 SP3


author: Hewlett-Packard Development Company, L.P. 7.3.0
changelog:
  - Enabled Simplified Chinese localization
   - Updated the following components
     Apache to version 2.4.6
     Libxml2 to version 2.9.1
     OpenSSL to version 1.0.1e
     Curl to version 7.32.0
     PHP to version 5.5.2
   - Packaged zlib 1.2.8 with SMH


author: Hewlett-Packard Development Company, L.P. 7.3.1
changelog:
  - Enabled support of 2048 & 4096 bit certificate for Single Sign-On (SSO)
   - Enabled FQDN (Fully Qualified Domain Name) for the CN (Common Name) field in the self-signed certificate & CSR (Certificate Signing Request)


author: Hewlett-Packard Development Company, L.P. 7.4.0
changelog:
  - Enabled support for Red Hat Enterprise Linux 7 
   - Updated the following components 
     PHP to version php-5.5.13 
     Curl to version curl-7.35.0
     Openssl to version openssl-1.0.1h
   - Improved SMH to use the system resources efficiently
   - SMH Plugin integration is modified
   - Enabled Japanese localization in SMH smart component installer
   - Removed files related to Namazu
   - Removed the checks for ZLIB installation


author: Hewlett-Packard Development Company, L.P. 7.4.1
changelog:
  - Updated the following components
     PHP to version php-5.5.18
     Curl to version curl-7.38.0
     Openssl to version openssl-1.0.1j
   - Disabled SSLv3 Protocol
   - SMH is been improvised with respect to security vulnerabilites


author: Hewlett-Packard Development Company, L.P. 7.5.0
changelog:
  - Updated the following components
     PHP to version php-5.5.23
     Openssl to version openssl-1.0.1m


author: Hewlett-Packard Development Company, L.P. 7.5.2
changelog:
  - Updated the following components
     PHP to version php-5.6.11
     Openssl to version openssl-1.0.2d
     Curl to version curl-7.42.1
   - SMH is been improvised with respect to security vulnerabilites


author: Hewlett-Packard Development Company, L.P. 7.5.4
changelog:
  - HP SMH self-signed certificate signature is changed to SHA-2
   - SMH is been improvised with respect to security vulnerabilites


author: Hewlett Packard Enterprise Development L P. 7.5.5
changelog:
  - HPE Rebranding changes
   - Updated the following components
     PHP to version php-5.5.31
     cURL to version curl-7.47.0
     OpenSSL to version openssl-1.0.2g
     Libxml2 to version libxml2-2.9.3
   - SSL protocol is now configurable through smhconfig cli
   - SMH is been improvised with respect to security vulnerabilites


author: Hewlett Packard Enterprise Development LP 7.6.0
changelog:
  - Updated the following components
     PHP to version php-5.5.38
     cURL to version curl-7.49.1
     OpenSSL to version openssl-1.0.2h
     Libxml2 to version libxml2-2.9.4
   - SSL Cipher Suite is set to TLSv1.2 as default
   - SMH is been improvised with respect to security vulnerabilites
   Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience.


author: Hewlett Packard Enterprise Development LP 7.6.1
changelog:
  - Updated the following components
     PHP to version php-5.6.27
     OpenSSL to version openssl-1.0.2k
     Apache to version httpd-2.4.25
   - SMH is been improvised with respect to security vulnerabilities
   Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience.


author: Hewlett Packard Enterprise Development LP 7.6.3
changelog:
  - Updated the following components
     PHP to version php-5.6.30
     OpenSSL to version openssl-1.0.2k
     Apache to version httpd-2.4.25
   - SMH is been improvised with respect to security vulnerabilities
   Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience.


author: Hewlett Packard Enterprise Development LP 7.6.4
changelog:
  - Supported the SLES 15 OS
   Upgrade Requirement: Recommended ? HPE recommends users update to this version at their earliest convenience.


author: QLogic Cavium Build environment
changelog:
  - Version 8.18.18.0
  - Added missing support to configure 1G speed via ethtool
  - Fixed calculation of number of ooo rx buffers and limit to 16K

  - Version 8.18.17.0-1
  - iWARP - Handle flush completion on unaligned ll2 connection
  - Add dp_module, dp_level as modparams
  - Add Kconfig file for upstream builds

  - Version 8.18.16.0-1
  - Fix missing return error code check on call to qedi_setup_int
  - Modify different module params
  - Add log message in the driver unload path
  - Fail all non-timesync related ioctls

  - Version 8.18.15.0-1
  - Added wwpn and wwnn to the FCoE dev-info
  - Validate chap and mutual chap auth correctly

  - Version 8.18.14.0-1
  - Fix error handling flow in TX path
  - Fix error handling flow in RX path
  - Implement get_protocol_tlv_data callback


author: QLogic Corp <support@qlogic.com> 8.08.00.08.15.0-k1-1
changelog:
  - 8.08.00.08.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Makefile updated for retpoline.

  - 8.08.00.07.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Add fix to free dma memory.
  - qla2xxx: Mask off Scope bits in retry delay.

  - 8.08.00.06.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Remove module parameter ql2xqos_priority_test.
  - qla2xxx: Add ability to process multiple CT-PT SGE's.

  - 8.08.00.05.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Simplification of register address used in qla_tmpl.c.
  - qla2xxx: Correction and improvement to fwdt processing.
  - qla2xxx: Add correction to RDP FW support logic.
  - qla2xxx: serialize sess free
  - qla2xxx: serialize session deletion
  - qla2xxx: prevent re_login trigger from sending too many commands
  - qla2xxx: prevent multiple active discovery commands per session
  - qla2xxx: Add log message for bbcr.
  - qla2xxx: Remove alias names for QoS module parameters.

  - 8.08.00.04.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Correction to non-existant fabric name.
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add qos fcport test mode.
  - qla2xxx: Optimized logs for searching qos fcport table.
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Correction to function qla26xx_read_qos_fcport_table().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Allow 27xx and 28xx to do bidirectional commands.
  - qla2xxx: Add RDP/ABTS deferred processing for vp's.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Rename QoS table row type and cleanup log prints.
  - qla2xxx: Optimize reading of QoS fcport table.
  - qla2xxx: Fixup/cleanup of QoS table index code.
  - qla2xxx: Minor cleanup of flash calls reoganization.
  - qla2xxx: Optimize flash register routines.
  - qla2xxx: Fixup flash register routines.
  - qla2xxx: Add debug prints to write flash routine.
  - qla2xxx: Simplify flash slow write log messages.
  - qla2xxx: Simplify NPIV create log messages.
  - qla2xxx: Simplify D-Port Diagnostics log messages.
  - qla2xxx: Cleanup log message for fwdt allocate.
  - qla2xxx: Add non-verbose SFP detail print.
  - qla2xxx: Quieten FEC=enabled message.
  - qla2xxx: Use interrupt pin number for port number.

  - 8.08.00.03.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Correction to EFT selection.
  - qla2xxx: Correction to flash write routine.
  - qla2xxx: Add correction to FW image selection.

  - 8.08.00.02.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Convert FLT flash reads to register method.
  - qla2xxx: Undo the replacements to ->optrom_read() calls.
  - qla2xxx: Flash reading routines cleanups.
  - qla2xxx: Make flash write avoid register banging.

  - 8.08.00.01.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Use registers for reading unaligned flash offset.
  - qla2xxx: Fix PCI header and data struct addresses.
  - qla2xxx: Fix and cleanup ROM code version string reading.
  - qla2xxx: Corrections to flt->region addresses.
  - qla2xxx: Add debug buffer dump for INITFW MBC.
  - qla2xxx: Add debug logs for QoS sorting/searching.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: Add conditionals to avoid fcport QoS when it is not enabled.
  - qla2xxx: Fix mis-pointing buffer in qla24xx_load_risc_flash().
  - qla2xxx: Provide Makefile CPP define for MoB testing.
  - qla2xxx: Fixup flash region code struct.
  - qla2xxx: Fixup msix/msi vector selection.

  - 8.08.00.00.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Add dump buffer print when nvram checksum fails.
  - qla2xxx: Refactor character signature compares into memcmp's.
  - qla2xxx: Replace 0x%x with %#x in all format strings.
  - qla2xxx: Normalize all flash reads to always use the dump ram mbc.
  - qla2xxx: Flash image validation cleanups.
  - qla2xxx: Add error test after dma_map_single.
  - qla2xxx: Add support for ISP28XX.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Minor cleanup regarding device type.
  - qla2xxx: Improve, correct, simplify fwdt endianess handling.
  - qla2xxx: Use endian macros to assign dynamic fields in fwdump buffer.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add endianizers to 27xx firmware image validator.
  - qla2xxx: Add new fwdt entry types.
  - qla2xxx: Leave fwdt endianess alone.
  - qla2xxx: Isolate test for valid firmware image.
  - qla2xxx: Add support for multiple fwdump templates/segments.
  - qla2xxx: Fix routine qla27xx_dump_mpi_ram().
  - qla2xxx: Fix routine qla27xx_dump_ram().
  - qla2xxx: Remove fwdt default template.

  - 8.07.00.60.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Sort qos_fcport_table->table for quicker searching.
  - qla2xxx: QoS fcport rename table->entry.
  - Revert "qla2xxx: Simplify fabric discovery part 2"

  - 8.07.00.59.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Read E2E QoS fcport priority bitmasks from flash.
  - qla2xxx: Add correction to E2E QoS bsg interface.
  - qla2xxx: Simplify PPC architecture detection.

  - 8.07.00.58.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Add debug logs to bsg qos interface.
  - qla2xxx: Add pointer to reference bsg request.
  - qla2xxx: Modify bsg get_qos_enabled to be per hba port.
  - qla2xxx: Add bsg interface for qos lun level bitmask.
  - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field.
  - qla2xxx: Add fabric priority qos lun iocb mechanism.
  - qla2xxx: Implement CT command GFO (Get Fabric Object).
  - qla2xxx: Add correction ql2xfabric_priority parameter description.
  - qla2xxx: Add extra debug print to bsg interface entry.
  - qla2xxx: Fix incorrect assignment instances of bsg_job->reply_len.
  - qla2xxx: Remove RDP response size cropping for logged out port.
  - qla2xxx: Fix supported speed ranges in FDMI/RDP.
  - qla2xxx: Simplify/cleanup max supported speed usage.
  - qla2xxx: Use gcc define to detect PPC architecture.
  - qla2xxx: Fix stale memory access for IRQ name
  - qla2xxx: Login state machine stuck at GPDB.
  - qla2xxx: Fix null pointer access on iocb timeout
  - qla2xxx: Fix gpnid crash.
  - qla2xxx: Serialize gpnid.
  - qla2xxx: Retry switch command on timed out.
  - qla2xxx: Simplify fabric discovery part 2
  - qla2xxx: Fix relogin for Nport Handle in use.
  - qla2xxx: Relogin is being triggered too fast.

  - 8.07.00.57.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Cleanup sparse warnings.
  - qla2xxx: Cleanup dpc handler routine.
  - qla2xxx: Minor cleanups regarding SFP validation.
  - qla2xxx: Replace all instances of snprintf() with scnprintf().
  - qla2xxx: Clean up usage of list_for_each_entry_safe().
  - qla2xxx: Use typeof() as 2nd argument to container_of().
  - qla2xxx: Simplify assignment of req_q_out index/pointer.
  - qla2xxx: Cleanup/simplify/uniformitize GS routines.
  - qla2xxx: Export ha->port_no to sysfs.
  - qla2xxx: Fix continuation indents in fwdt.
  - qla2xxx: Cleanup __iomem attribute in fwdt.
  - qla2xxx: Minor improvements and corrections to fwdt code.
  - qla2xxx: Flash sanity test cleanups and corrections.
  - qla2xxx: Simplify read/write flash dword routines.
  - qla2xxx: Simplify ql_dump_buffer() interface usage.
  - extras: Simplify log.sh
  - qla2xxx: Add short name for SFP range autodetect.
  - qla2xxx: Fix integer overflow in bsg code.
  - qla2xxx: Fix an integer overflow in sysfs code
  - qla2xxx: Export firmware attributes word to sysfs.
  - qla2xxx: Make bsg request crash-proof.
  - qla2xxx: Normalize duplicate timeout field contexts.
  - qla2xxx: Fix duplicate timeout fields used in wrong contexts.
  - qla2xxx: Fix vha/ha contexts accidentally swapped.
  - qla2xxx: Simplify execution of fabric commands.

  - 8.07.00.56.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11:
  - qla2xxx: Increment version to sync drivers.
  XS65, XS70, XS71:
  - qla2xxx: Sync up RDP response handling.
  - extras: Correction to build_rpm.sh.

  - 8.07.00.55.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71:
  - qla2xxx: Correct description of module parameter based on usage.
  - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data.
  - qla2xxx: Add D-Port Diagnostic reason explanation logs.

  - 8.07.00.54.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70:
  - extras: Add script to modify logging value
  - qla2xxx: move session delete to driver work queue
  - qla2xxx: recheck session state after rscn
  - qla2xxx: Add workqueue to delete fcport from bsg sp->free().
  - qla2xxx: Skip allocating fcport if ct allocation fails.
  - qla2xxx: Fix reported supported link speeds.
  - qla2xxx: Add context to FEC state logs.

  - 8.07.00.53.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70:
  - extras: Fix build.sh remove of driver/module.
  - qla2xxx: Add ability to autodetect SFP type.
  - qla2xxx: Simplify qla2x00_get_host_fabric_name().
  - qla2xxx: Replace calls to __constant endian macros.
  - qla2xxx: Fix indentation whitespacing.
  - qla2xxx: Remove space at end of debug print.
  - qla2xxx: Correction to spelling of "identifier".
  - qla2xxx: Refactor ct req/rsp struct to mirror FC-GS specification.
  - qla2xxx: Implicitly inline struct ct_sns_gid_pt_data.
  - qla2xxx: Minor simplify/cleanup of configure fabric/loop routines.
  - qla2xxx: Simplify min_link_speed and max_speed_sup sysfs interfaces.
  - qla2xxx: Remove potential macro parameter side-effect in ql_dump_regs().
  - qla2xxx: Add log message to indicate FEC state.
  - qla2xxx: Make fwdt function call array static.
  - qla2xxx: fwdt skip entry for zero queue count for t263/t274.
  - qla2xxx: Reduce debug logs on 27xx fwdump.
  - qla2xxx: Print fwdump flags at end of fwdump.
  - qla2xxx: Convert fwdump length difference to size_t.
  - qla2xxx: Add endianizer macro calls to fc host stats.
  - qla2xxx: Add correction to fc host stats.

  - 8.07.00.52.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add support for Quail firmware.

  - 8.07.00.51.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add LR distance support from nvram bit.
  - qla2xxx: Add support for fabric priority per target.
  - qla2xxx: Add timeout ability to wait_for_sess_deletion().
  - qla2xxx: Fix ql_dump_buffer (avoid emitting on multiple lines).
  - qla2xxx: Move logging default mask to execute once only.
  - qla2xxx: Print correct mailbox registers in failed summary.
  - qla2xxx: Allow SNS fabric login to be retried.
  - qla2xxx: Correction to vha->vref_count timeout.
  - qla2xxx: Process AEN 0x8200 for CNA cards only.
  - qla2xxx: Test elreq.options for CNA only.
  - qla2xxx: Use sp->free instead of hard coded call.
  - qla2xxx: Prevent sp->free null pointer dereference.
  - qla2xxx: Free sp after marking not busy.
  - qla2xxx: Increase the login retry count to 30.
  - qla2xxx: Properly calculate fwdump buffer size.

  - 8.07.00.50.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: fix path recovery.

  - 8.07.00.49.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Prevent null pointer dereference of ctx.
  - qla2xxx: Allow fwdump template T262 to specify same start/end.
  - qla2xxx: Reduce excessive debug print during 27xx fwdump.
  - qla2xxx: Add test to avoid processing non-RDP ELS requests.
  - qla2xxx: Avoid crashing on null cred pointer in exit_creds().
  - extras: Consolidate help text into here-is redirection.
  - extras: Fix build.sh (cleanup and optimize).
  - qla2xxx: Avoid repeated fwdumps on AEN8017.
  - qla2xxx: Fix name server relogin.
  - qla2xxx: Use wait queue for vha->vref_count timeout.
  - qla2xxx: Fix mbx pointer error in classic fwdump.
  - qla2xxx: Replace instances of sp->fcport->vha with sp->vha.

  - 8.07.00.48.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add support for minimum link speed.

  - 8.07.00.47.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Simplify sp->done() and sp->free() interfaces.
  - qla2xxx: Replace sp->fcport->vha context with simpler sp->vha.
  - qla2xxx: Use sp->vha context in function qla2x00_rel_sp().
  - qla2xxx: Use sp->vha context in calls to sp->free().
  - qla2xxx: Use sp->vha context in calls to sp->done().
  - qla2xxx: Add vha field of appropriate type to struct srb.

  - 8.07.00.46.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Simplify printk format for portid's.
  - qla2xxx: Minor corrections to indent/whitespace.
  - qla2xxx: Minor corrections and missing additions.
  - qla2xxx: Allow port resync after isp reset.

  - 8.07.00.45.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add check for different type of RSCN.
  - qla2xxx: Remove temporary fix PRE_UNLOADING bit.
  - qla2xxx: Schedule board_disable only once.
  - qla2xxx: Fix improper fcport_count accounting.
  - qla2xxx: Fix slow mem alloc behind lock.
  - qla2xxx: Fix deadlock.
  - qla2xxx: Tweak loop up.
  - qla2xxx: Relogin retweak.
  - qla2xxx: Fix sess deletion deadlock.
  - qla2xxx: Add wait for session remove on unload.
  - qla2xxx: Move login/logout decision making out of Full Fabric Scan.
  - qla2xxx: Add discovery event handling.
  - qla2xxx: Add async session creation.
  - qla2xxx: Add async sess update.
  - qla2xxx: Add async Get Port Database MB.
  - qla2xxx: Add async Get Name List MB.
  - qla2xxx: Add async GPNID.
  - qla2xxx: Add async GPSC.
  - qla2xxx: Add async GID_PN.
  - qla2xxx: Add support routines to search for fcport.
  - qla2xxx: Consolidate argument list for CTPassthru.
  - qla2xxx: Commonize alloc & free of fcport struct.
  - qla2xxx: Fix pass wrong argument in sp done.

  - 8.07.00.43.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Provide separate RDP enable (ql2xrdpenable).
  - extras: Fix hash-bang (#!) line to specify /bin/bash in build.sh.

  - 8.07.00.42.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Remove all DIX-0 references.

  - 8.07.00.41.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Disable setting module parameter ql2xenabledif.
  - qla2xxx: Correct supported FC speed for sysfs.
  - qla2xxx: Correct supported FC speed for FDMI/RDP.

  - 8.07.00.40.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Correct RDP Optical Product Descriptor Revision field.
  - qla2xxx: Remove macro parameter side effect in host_to_fcp_swap().

  - 8.07.00.39.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11.3, XS65, XS70:
  - qla2xxx: Fix duplicate message id.
  - qla2xxx: Disable adapter and skip error recovery when register disconnect.
  - qla2xxx: Separate ISP type bits out from device type.
  - qla2xxx: Correction to function qla26xx_dport_diagnostics().

  - 8.07.00.38.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11.3, XS65, XS70:
  - qla2xxx: Add support to handle Loop Init error Asynchronus event.
  - extras: add option to log.sh to show available debug/log categories.
  - qla2xxx: Let DPORT be enabled purely by nvram.
  - qla2xxx: Add bsg interface to support statistics counter reset.
  - qla2xxx: Add bsg interface to support D_Port Diagnostics.

  - 8.07.00.37.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Check for device state before unloading the driver.
  - qla2xxx: Bump vendor fdmi version.
  - qla2xxx: Properly reset firmware statistics.
  - qla2xxx: Properly initialize IO statistics.
  - qla2xxx: Reduce RDP payload size if requesting port not logged in.
  - qla2xxx: Reject RDP request if requesting port is not logged in.
  - qla2xxx: Unswap high/low RDP optical descriptor alarms/warnings.
  - qla2xxx: Add method for obtaining RDP buffer credit descriptor.
  - qla2xxx: Make corrections/cleanups/improvements to RDP routine.
  - qla2xxx: Include ISP27xx in RDP/purex driver intercept.
  - qla2xxx: Make debug buffer log easier to view.
  - qla2xxx: Add module parameter alternate/short names.

  - 8.07.00.36.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode.

  - 8.07.00.35.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Shutdown board on thermal shutdown aen.
  - qla2xxx: Correct RDP optical element array index.
  - qla2xxx: Log only failure case message for abort command.
  - qla2xxx: Add ram area DDR for fwdump template entry T262.
  - qla2xxx: Correction to RDP extensions transgression flags.
  - qla2xxx: Remove sysfs node fw_dump_template.
  - qla2xxx: Argument to le32_to_cpus() should be a pointer.
  - qla2xxx: Fix mbx_reg pointer iterator in 25xx fwdump routine.
  - extras: Inline log.sed into log.sh

  - 8.07.00.34.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Add support to disable laser for ISP27XX.
  - qla2xxx: Add RDP extensions.
  - qla2xxx: Set relogin flag when we fail to queue login requests.
  - qla2xxx: Fix default value descriptions for module parameters.
  - qla2xxx: Enable T10-DIF for ISP27XX.
  - qla2xxx: Use valid BBCR offset and datatype.
  - Revert "qla2xxx: Set echo test mailbox command option bit15 correctly."

  - 8.07.00.33.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - extras: Improve qlssen.sh usage.
  - qla2xxx: Provide mbx info in BBCR data after mbx failure
  - qla2xxx: Set echo test mailbox command option bit15 correctly.
  - qla2xxx: Correct FDMI vendor port state value.

  - 8.07.00.32.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - Revert "qla2xxx: Set priority for mailbox commands."
  - Revert "qla2xxx: Flush mailbox commands after timeout."

  - 8.07.00.31.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Avoid side effects when using endianizer macros.
  - qla2xxx: Fix warnings reported by static checker.
  - qla2xxx: Fix printks in ql_log message.
  - qla2xxx: Fix printk in qla25xx_setup_mode.
  - qla2xxx: Fix busy wait regression.
  - qla2xxx: Fix race in handling rport deletion during recovery causes panic.
  - qla2xxx: Set priority for mailbox commands.
  - qla2xxx: Flush mailbox commands after timeout.
  - extras: Add script to enable/disable vendor fdmi (and rebuild initrd image).

  - 8.07.00.30.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Add support for Private link statistics counters.
  - qla2xxx: Add support for buffer to buffer credit value for ISP27XX.
  - qla2xxx: Add support for online flash update for ISP27XX.

  - 8.07.00.29.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - extras: Script for extracting all logs/debugs from driver source
  - qla2xxx: Defer marking device lost when receiving an RSCN.
  - qla2xxx: Convert stray printk's in qla_nx.c to ql_log's.
  - qla2xxx: Allow fw to hold status before sending ABTS response.
  - qla2xxx: Seed init-cb login timeout from nvram exclusively.
  - qla2xxx: Remove unneeded link offline message.
  - qla2xxx: Fix couple of small typos in qla2xxx module code.
  - qla2xxx: Qualify ELS RDP mapping for ISP25xx and ISP26xx only.
  - qla2xxx: Restructure RDP routine to handle failure cases.
  - qla2xxx: Reduce multiple FDMI routines into a single routine.
  - qla2xxx: Simplify debug prints of wwnn, wwpn, and port id.
  RHEL7, SLES12:
  - qla2xxx: Avoid asynchronous abort requests.

  - 8.07.00.28.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Fix endianess of fdmi smartsan security support field.
  RHEL7:
  - qla2xxx: Reduce target mode performance hit in ISR.

  - 8.07.00.27.xx.y-k
  RHEL7:
  - qla2xxx: Avoid crossing initiator/target modes during AEN handling.

  - 8.07.00.26.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Set smartsan security support to 1.
  - qla2xxx: Add support for ISP2271.
  - qla2xxx: Fix missing device login retries.
  - qla2xxx: do not clear slot in outstanding cmd array.

  - 8.07.00.25.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Remove decrement of sp reference count in abort handler.
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - extras: Fix whitespace in .sh files.

  - 8.07.00.24.xx.y-k0
  RHEL5
  - Update 24xx/25xx firmware to version 8.01.00.

  - 8.07.00.24.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Do not crash system for sp ref count zero.
  - qla2xxx: Do not reset adapter if SRB handle is in range.
  - qla2xxx: Don't reset ISP when error entry with out of range handle.
  - qla2xxx: Add support for MPI and PEP FW version for ISP 27xx.

  - 8.07.00.23.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Fix RPD response missing fabric name
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: fix porting changes for SmartSAN
  RHEL5:
  - qla2xxx: Fix Link Service Request payload word 0.
  - qla2xxx: Cleanup and Silence unnecessary PUREX/RDP printouts.

  - 8.07.00.22.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Allow RPRT to work with all switches (mgmt srvr loopid).
  - qla2xxx: Use physical port for sending RPRT command.
  - qla2xxx: Use correct macro for SFP flags.
  - qla2xxx: Add adapter checks for FAWWN functionality.
  - qla2xxx: Update default Hostname.
  RHEL5:
  - qla2xxx: Corrections to FDMI registering routines.
  - qla2xxx: Corrections to FDMI processing routines.
  - qla2xxx: Corrections ro PUREX/RDP proessing.

  - 8.07.00.21.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: additional fdmi_register() attempt.
  - qla2xxx: Fix missing SFP flags from RDP Payload.
  - qla2xxx: driver fails to detect 4G adapters.
  - qla2xxx: Pause risc before manipulating risc semaphore.
  - qla2xxx: Use ssdid to gate semaphore manipulation.
  - qla2xxx: Handle AEN8014 incoming port logout.
  - qla2xxx: Add serdes register read/write sysfs support for ISP25xx.

  - 8.07.00.20.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Trigger FDMI registration for RPRT.
  - qla2xxx: Remove SmartSAN attributes from the RDP payload.
  - qla2xxx: Allow FDMI Hostname registration during boot.
  - qla2xxx: Updated Active FC4 port type.

  - 8.07.00.19.xx.y-k
  RHEL7.x, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: FDMI RDP command support.
  - qla2xxx: Support for FDMI Smart SAN Mamangement commands
  UEK2:
  - qla2xxx: Fix wrongly report "PCI EEH busy" when get_thermal_temp.

  - 8.07.00.18.xx.y-k
  RHEL7.x, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.
  - qla2xxx: Prevent multiple firmware dump collection for ISP27XX.
  - qla2xxx: Add serdes read/write support for ISP27XX
  - qla2xxx: Don't reset ISP when we receive an error entry with an out of range handle.
  - qla2xxx: Do not crash system for sp ref count zero
  RHEL7.x, RHEL6, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port.
  - qla2xxx: Disable Interrupt handshake for ISP27XX.
  - qla2xxx: Add debugging info for MBX timeout.
  - qla2xxx: Do not reset adapter if SRB handle is in range.
  RHEL7.x, SLES12, XS 6.5:
  - qla2xxx: Add support for Legacy and MSI interrupt modes.
  RHEL7.x:
  - qla2xxx: Fix compiler issue for FC_PORTSPEED_32GBIT on RHEL 7.1


  - 8.07.00.17.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Add udev notification to save fw dump for ISP27XX.
  - Add message for sucessful FW dump collected for ISP27XX.
  - Add fix for beacon for ISP27XX.
  - Increase the wait time for firmware to be ready for P3P.
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Disable FCE and FET tracing for ISP27XXX.
  - Add support to load firmware from file for ISP 26XX/27XX. 
  RHEL7, SLES12, XS 6.5:
  - Fix crash due to wrong casting of reg for ISP27XX.

  - 8.07.00.16.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Mark port lost when we receive an RSCN for it.
  - Disable PCI device in shutdown handler.
  - Fail adapter initialization on load ram failure.
  - Move warning message to debug level.
  - Restore WWPN from flash when cable pulled for FA-WWPN port.

  - 8.07.00.15.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS:
  - Restore WWPN in case of Loop Dead.
  - Honor FCP_RSP retry delay timer field.
  - Add missing ISP27xx checks to optrom code.
  - Force use of mailbox interface for flash access commands for ISP27xx.
  - Fix mismatch is checks to free sysfs nodes.
  - Disable laser for ISP2031 while unloading driver.
  - Enable DPORT using NVRAM parameters.
  RHEL5:
  - Disable FDMI by default.
  - Fix FW dump issue for ISP82XX. 
  - Add 25xx firmware version 7.05.00.

  - 8.07.00.14.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Add fix in driver unload for pending activity.
  - Allow user to change ql2xfdmienable value.
  - Declaration error cause stack corruption.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Fix duplicate log message ID.
  - Fix driver version string message.
  RHEL7, RHEL6, SLES11, UEK, XS:
  - Unload of qla2xxx driver crashes the machine.
  RHEL5:
  - Enable FDMI by default. 
  - Add 24xx/25xx firmware version 7.04.00.

  - 8.07.00.13.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Remove restriction on starting remote device discovery on port update.
  - Allow nvram bit to enable FA-WWN.
  - Allow nvram bit to enable D-PORT.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Move mailbox failure messages to a default debug level.

  - 8.07.00.12.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Correction to FA-WWN for un-acquiring portname.
  - Add scatter/gather table size module parameter.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Add ql2xasynclogin module parameter.
  RHEL5:
  - For netlink response use respective sender's unique pid.

  - 8.07.00.11.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Fix incorrect debug printk.
  - Add D-Port functionality.
  - Add FA-WWN functionality.
  - Add FDMI-2 functionality.
  - ISPFx00 unexpected resets during adapter boot sequence.
  - Incorrect linked list semantic in qlafx00_get_fcport().
  - Add unknown parameter error handling to build.sh.

  - 8.07.00.10.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Fix potential return count bug in qla2xxx_get_vpd_field().
  - ISPFX00 avoid writing semaphore register in request_irqs().
  - ISP27xx fwdump template error print simplification.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - ISP25xx multiqueue shadow register crash fix.
  - Correction of debug level in mailbox command print 0x1111.

  - 8.07.00.09.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Enable fast flash access for ISP83xx.
  - Do logins from chip reset in DPC thread instead of error handler thread.
  - Remove wait for online from host reset handler.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - ISP27xx fwdump add tests for incomplete template.
  - ISP27xx fwdump optimize template entry table lookup.
  - ISP27xx fwdump add template entry T275 (insert buffer).
  - ISP27xx fwdump template remove high frequency debug logs.
  - ISP27xx fwdump template fix insertbuf() routine.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Add endianizer to T10 PI max_payload_size modifier.
  RHEL5, SLES10:
  - Allow ELS commands with variable size command/data.
  RHEL5:
  - Add 24xx/25xx firmware 7.03.00.

  - 8.07.00.08.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Add MBC option for fast SFP data access.
  - Remove ISP8044 from pci table.
  - Revert "Change default capture to firmware defined capture mask".
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Remove mapped vp index iterator macro dead code.
  RHEL5:
  - Add shutdown callback handler.

  - 8.07.00.07.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the owner of the reset.
  - Reduce the time we wait for a command to complete during SCSI error handling.
  - Delay driver unload if there is any pending activity going on.
  - Don't check for firmware hung during the reset context for ISP82xx.
  - Fix beacon blink logic for ISP26xx/83xx.
  - Add mention of RHEL7 and SLES11.3 in README.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - ISP27xx firmware dump template spec updates (including T274).
  - ISP27xx queue index shadow registers.
  - Fix ISPFx00 not displaying the correct FW version after FW update through sysfs Interface.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Clear loop_id for ports that are marked lost during fabric scanning.
  - Fixup looking for a space in the outstanding_cmds array in qla2x00_alloc_iocbs().

  - 8.07.00.06.xx.y-k
  RHEL7, RHEL6, SLES11, SLES10, UEK, UEK2, XS:
  - Avoid escalating the SCSI error handler if the command is not found in firmware.
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Change default capture to firmware defined capture mask.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Adjust adapter reset routine to the changes in firmware specification for ISPFx00.

  - 8.07.00.05.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, XS:
  - Add #if around printk_ratelimit to fix build issue on RHEL 6.
  - Add 'sparse_endian' command line option to build.sh
  - Fix build errors related to invalid print fields on some architectures.
  - Poll during initialization for ISP25xx and ISP83xx.
  - Add target mode definitions [SLES 11 SP3 specific].
  - ISP8044 ipmdio bus timeout improvement.
  - Remove configure VFs mailbox command call.
  - Use proper log message for flash lock failed error for ISP82XX.
  - IOCB data should be copied to I/O mem using memcpy_toio.

  - 8.07.00.04.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, Citrix:
  - Add sparse command line option.
  - Add 8044 serdes bsg interface.
  - Correction to 27xx template entry types 256 and 258.
  - Track the process when the ROM_LOCK failure happens.
  - Introduce fw_dump_flag to track fw dump progress.
  - Remove unnecessary code from qlafx00_intr_handler.
  - Enable fw_dump_size for 8044.
  - Update entry type 270 to match spec update for 27xx.
  - Change copyright year to 2014 in all the source files.
  - Remove unnecessary delays from fw dump code path.
  - Use jiffies instead of time.
  - Decrease pci access for response queue processing for ISPFX00.
  - Use proper log message for flash lock failed error.
  - Include <delay.h> file for msleep declaration in qla_nx2.c.
  - Correct the port no assignment for ISP82XX.
  RHEL5:
  - Add 24xx/25xx/81xx/83xx FC and FCoE Firmware 7.02.00.
  - IOCB data should be copied to I/O memory using memcpy_toio().
  - Use the physical port for all loopback operations.

  - 8.07.00.03.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Wait for reset completion without lock for ISPFX00.
  - Add pci device id 0x2271.
  - Add pci device id 0x2071.
  - Fix Task Management command asynchronous handling
  - Add IOCB Abort command asynchronous handling
  - Do not schedule reset when one is already active when receiving an invalid status handle.
  - Add and use 32Gbps FC-GS definitions.
  - Correct operations for ISP27xx template types 270 and 271.
  - Fix sparse warnings in qla_mr.c
  - Allow 83XX and 27XX both to write req_q_out register.
  - Correct 83xx/27xx mislogic in setting out_mb in qla25xx_init_req_que().
  - Check for peg alive counter and clear any outstanding mailbox command.
  - Log when device state is moved to failed state.
  - Issue abort command for outstanding commands during cleanup when only firmware is alive.
  - Support of new Helga minidump opcodes QLA8044_RDDFE(38), QLA8044_RDMDIO(39),QLA8044_POLLWR(40).
  - Allow the next firmware dump if the previous dump capture fails for ISP8044.
  - Add build.sh commandline option help/description to README file.

  - 8.07.00.02.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Allow ISP83xx and ISP27xx to use read/write remote register.

  - 8.07.00.01.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, UEK2/R3, Citrix:
  - Remove pci device id ISP2071.

  - 8.07.00.00.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Add support for ISP2701.
  - Remove Marker type IOCB logic for ISPFX00.
  - Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec
  - Add BE support for ISPFX00.
  - Avoid poisoining in the response queue for ISPFX00.
  - Simplyfy the ISPFX00 interrupt handler code for ISPFX00.
  - Optimize the response queue processing for ISPFX00.
  RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix:
  - Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for Helga.
  - Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  UEK2/R3:
  - Clear drv active before removing the host.
  - Wait for reset completion without lock for ISPFX00.

  - 8.06.00.13.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Add mutex around optrom calls to serialize accesses.
  - Add handling for boot indication progress AENs
  - Replace constant value for IOCTL IOCB abort execution status with a macro.
  - Enable the Flash Access Control (FAC) mailbox command.
  - Use proper message for Non owner reset ACK Timeout.
  - Remove init control block related dead code for ISPFX00.
  - Select correct request queue for error type IOCB for ISPFX00.
  - The file README.qla2xxx does not mention SLES11.3 (or later).
  - Fix warning reported by smatch.
  - Properly handle 32 bit mailbox register for ISPFX00.
  - Set host can_queue value based on available resources.

  - 8.06.00.12.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Assign the correct pointer to the sp->ctx in abort context for ISPFx00 (BZ8627).
  - Obtain adapter model description from vpd (SLES10 only) (ER105124).
  - Use scnprintf() instead of snprintf() in the sysfs handlers.
  - Only complete dcbx_comp and lb_portup_comp for virtual port index 0.
  - Reset nic_core_reset_owner on moving from COLD to READY for ISP8044 (ER111788).
  - Revert "qla2xxx: Remove entry in outstanding_cmds array if we fail to abort a request."
  - QLAFX00 Replace a constant with a macro definition for host->canqueue assigmnment.

  - 8.06.00.11.xx.y-k (RHEL5 only)
  - Iterate the correct list for remote port removal.
  - Honor FCPORT_UPDATE_NEEDED dpc flag for all ISPs.
  - Don't set NPIV_CONFIG_NEEDED and RELOGIN_NEEDED flag for ISPFX00.

  - 8.06.00.10.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix):
  - Remove entry in outstanding_cmds array if we fail to abort a request.
  - Clear RISC INT reg only for an event and not always while polling.
  - Fix undefined behavior in call to snprintf().

  RHEL6, SLES11, UEK, Citrix:
  - Add BSG interface for read/write serdes register.
  - Fix request queue null dereference.
  - Disable adapter when we encounter a PCI disconnect..
  - Refactor shutdown code so some functionality can be reused.
  - QLAFX00 Fix issue with not displaying node name after system reboot.
  - Add changes to obtain ISPFX00 adapters product information.
  - Add IOCTL command abort logic for ISPFX00.

  RHEL5, SLES10:
  - Add netlink interface for read/write serdes register.
  - Fix udev fwdump rules.

  RHEL5:
  - Update 8G and 4G firmware to version 7.01.00.

  README:
  - Updated for builing kernel with out-of-box driver for Boot-from-SAN.
  - Updated for building ramdisk with rpm driver for Citrix Boot-from-SAN.

  - 8.06.00.09.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Honor execute firmware failures.
  - Add BPM support for 25xx.
  - Disable INTx interrupt for ISP82XX.
  - Correctly set mailboxes for extended init control block.
  - Duplicate luns instantiated after doing ISP reset.
  - Don't consider the drivers knocked out of IDC participation for future reset recovery process.
  - Change message displaying fcport pointer to port id.
  - Fix the sparse C=2 warnings for ISP8044.
  - Revert "qla2xxx: Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX."
  - Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low."
  - Print proper QLAFX00 product name at probe.
  - Fix compile warnings in qlafx00_build_scsi_iocbs() on BE platforms.
  - Unloading driver crashes server due to not freeing sp pool (SLES10 only).
  - Update 8G and 4G firmware to 7.0.2. (RHEL5 only).

  - 8.06.00.08.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fixups for ISP8044 beacon blink.
  - Select link initialization option bits from current operating mode.
  - Move queue depth ramp down message to i/o debug level.
  - Correctly reset Graceful Reset Bit in IDC Driver Control Register.
  - Add a new interface to update versions.
  - Correctly print out/in mailbox registers.
  - Add #if preprocessor statements to get driver compiled on UEK2 and R3.

  - 8.06.00.07.xx.y-k (RHEL5 only)
  - Set the timeout value to 45 for IOCTL commands for ISPFx00.
  - Dump IOCB on IOCTL command timeout for ISPFx00.
  - Allocate outstanding cmd array and request queue under single hardware lock.

  - 8.06.00.06.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the reset owner on ready and failed state for ISP8044.

  - 8.06.00.05.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the idc control graceful bit for ISP8044 after initialization.
  - Don't check for firmware hung during the reset context.
  - Add loopback IDC-TIME-EXTEND aen handling support.
  - Clear presence bit for ISP8044 on unload and error.
  - Move Previous version info message to debug level.

  - 8.06.00.04.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Properly set the tagging for commands.
  - Get the mpi version for ISP8044.
  - Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  - Implementation of flash write buffer mode for ISP8044.
  - Helga loopback support.
  - Add pex-dma support for faster minidump capture on ISP8044.
  - Collect minidump for ISP8044 using sysfs.
  - Perform context reset instead of chip reset for ISP8044 host reset.
  - Don't the set nic_core_reset_owner flag for ISP8044.
  - Set IDC graceful reset and don't capture minidump if it is set.
  - Honor return value from qla82xx_device_state_handler() in qla82xx_abort_isp().
  - Silent noisy message during ISP8044 dump collection.
  - Correct debug print id's.
  - Add 8044 entry in udev rules.
  - Set default critical temperature when ISPFX00 firmware doesn't provide it.
  - QLAFX00 make over-temp AEN informational, add log for normal-temp AEN.
  - Correct Interrupt Register offset for ISPFX00
  - Remove handling of Shutdown Requested AEN from qlafx00_process_aen().
  - Send all AENs for ISPFx00 to above layers.

  - 8.06.00.03.xx.y-k (RHEL6, SLES11, RHEL5, UEK, Citrix)
  - Add changes in initialization for ISPFX00 cards with BIOS.
  - Add changes to support extended IOs for ISPFX00.

  - 8.06.00.02.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - ISP8044 abort isp.
  - Helga Flash Write.
  - Helga legacy pin based interrupt support.
  - Get all the optrom sysfs attributes for CNA.
  - Add ISP8044 to MIDTYPE macro.
  - Fix sparse warning reported for qla_nx2.c.
  - Helga Remove hardcoded return values by QLA_FUNCTION_FAILED.
  - Remove minidump and reset code if FCoE is not a owner.
  - Helga fcoe_nic_reset_owner updated.
  - Fix compilation issue on ia64.
  - Fix for serial_num not getting displayed via sysfs.
  - Add missing FCP statistics to sysfs interface.

  - 8.06.00.01.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Set VPD Size to 1K for ISP82XX, ISP8044, ISP8031 (ER107011).
  - Helga call flash recovery function from bootstrap code.
  - Clear the MBX_INTR_WAIT flag when the mailbox time-out happens.
  - Drop redundant log message when ROM lock failure happens during retries.
  - To update Helga minidump template capture.
  - Make log message that prints when a completion status requires a port down more readable.
  - Reconfigure thermal temperature.
  - Add setting of driver version string for vendor application.
  - Remove QL_DEBUG_LEVEL_17 defines from qla_nx.c.

  RHEL6, SLES11, UEK, Citrix:
  - Set the index in outstanding command array to NULL when cmd is aborted when the request timeout (ER107084).

  - 8.06.00.00.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fix for locking issue between driver ISR and mailbox routines.
  - Do not take a second firmware dump when intentionally generating one.
  - Move qla2x00_free_device to the correct location.
  - Add support for ISP8044.
  - Update firmware link in Kconfig file.
  - Perform coverity analysis from build.sh

  RHEL6, SLES11:
  - Correct multiqueue offset calculations.
  - Add module parameter for interrupt mode.
  - Fix incorrect test after list_for_each_entry() exits.
  - Do not query FC statistics during chip reset.

  RHEL5, SLES10:
  - Use spinlock while accessing vport list.

  SLES10:
  - Correction of operator in udev rules.

  - 8.05.00.03.xx.y-k (RHEL6, SLES11), 8.04.00.15.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add clarifying printk to thermal access fail cases.

  RHEL5, SLES10:
  - Move list add of ha to non-error section of probe_one.

  - 8.05.00.02.xx.y-k (RHEL6, SLES11), 8.04.00.14.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Revert "qla2xxx: Add setting of driver version string for vendor application."

  RHEL6, SLES11, UEK, Citrix:
  - Debug ID corrections.
  - Add iounmap(ha->cregbase) calls for ISPFX00 adapters for proper driver cleanup during load / unload.
  - Clear the outstanding command array for task management processing for ISPFx00.
  - Remove Request / Response transfer error AENs handling from qlafx00_async_event().
  - Proper cleanup of BSG request when the request time-out on ISPFx00.
  - Fix issue with calling sp_done() twice for task management commands.
  - Fix bug in cont_entry handling for the cases when FW provides more data than mid layer can handle.
  - Correction to structure size while registering host information with firmware.

  RHEL5, SLES10:
  - Use vp_list field of scsi_qla_host while traversing virtual ports list.

  - 8.05.00.01.xx.y-k (RHEL6, SLES11.x), 8.04.00.13.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add setting of driver version string for vendor application.
  - Integrate generic card temperature with mezz card temperature.
  - Correction of comment in MBC opcode defines.
  - Wait for IDC complete event to finish loopback operation.
  - Don't process state change aen for reset owner.
  - Don't process RSCNs for a vport on the same physical adapter.
  - Correct list-iteration bug in Report-ID Acquisition codes.

  RHEL6, SLES11:
  - Addedd logic to monitor aenmbx0 register for fixed intervals on ISPFx00.
  - Remove unnecessary operations from qlafx00_soc_cpu_reset() and
  add resetting IRQ ack register per core.

  RHEL5, SLES10:
  - Return -EINVAL when setting up loopback operation.

  RHEL5:
  - Inclusion of 8G firmware version 5.09.00.
  - Inclusion of 4G firmware version 5.09.00.

  - 8.05.00.00.xx.y-k (RHEL6.x and SLES11.x)
  - Enhancements to support ISPFx00.

  - 8.04.00.12.xx.y-k
  - Update the copyright information.
  - Display the lock owner on lock acquire failure.
  - Move loopback mode reset after chip reset check.
  - Extra loopback error handling for ISP83xx.
  - Do link initialization on get loop id failure.
  - Do MPI reset only for 81xx.

  V2632 (RHEL 6.x, SLES 11.x, Citrix 6.0, UEK):
  - Revert "qla2xxx: Optimize existing port name server query matching."
  - Revert "qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
  - Don't free pool that wasn't allocated.
  - Unload hangs after issuing BSG commands to vport.

  Citrix 6.0:
  - Create initrd as a part of installation and removal of the driver rpm.
  - RPM install should install driver under extra instead of driver directory.

  RHEL 5.x, SLES 10.x:
  - MBA_IDC_NOTIFY case should fallthru.
  - Add fw_dump_size sysfs attribute file.
  - Add test for validity of virtual host in netlink interface.

  SLES 10.x:
  - Add 8031/2031 cases to request firmware.

  - 8.04.00.11.xx.y-k
  - Move marking fcport online ahead of setting iiDMA speed.
  - Add 16Gb/s case to get port speed capability.
  - Get VPD information from common location for CNA.
  - Don't clear drv active on iospace config failure.
  - Display that driver is operating in legacy interrupt mode.
  - Add "16" speed to link speeds array in qla2x00_iidma_fcport() function
  - Correct race in loop_state assignment during reset handling.
  - Reject loopback request if one is already in progress.
  - Update the FTP site references in the driver sources.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Obtain loopback iteration count from bsg request.
  - Parameterize the link speed string conversion function.
  - Update ql2xextended_error_logging parameter description with new options.
  - Fix typo in qla2xxx driver.
  - Free rsp_data even on error in qla2x00_process_loopback().
  - Avoid null pointer dereference in shutdown routine.

  RHEL 5.x:
  - Remove fabric_logout() calls from qla2x00_dev_loss_tmo_callbk() function.

  SLES10.x:
  - Clear local references of rport on device loss timeout notification from FC transport.

  - 8.04.00.10.xx.y-k
  - Honor status value of 2 for report-id acquisition.
  - Ignore driver ack bit if corresponding presence bit is not set.
  - Add Gen3 PCIe speed 8GT/s to the log message.
  - Acquire risc semaphore before resetting ISP.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Ramp down queue depth for attached SCSI devices when driver resources are low.
  - Determine the number of outstanding commands based on available resources.
  - Fix for kernel crash when external loopback diagnostic is run through BSG interface.
  - Fix coccinelle warnings in qla2x00_relogin.
  - Test and clear FCPORT_UPDATE_NEEDED atomically.
  - Use correct Request-Q-Out register during bidirectional request processing
  - Fix typo in qla83xx_fw_dump function.
  - Move noisy Start scsi failed messages to verbose logging level.
  - Fix for warnings reported by sparse.

  RHEL 5.x:
  - Inclusion of 4G/8G firmware version 5.08.00.
  - Log message when qla2xenablemsix module parameter is set to 2 (MSI mode) and adapter does not support MSI mode.
  - Revert "qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports"
  - Revert "qla2xxx: No fcport FC-4 type assignment in GA_NXT response."

  Citrix 6.x:
  - RPM build should hide the directory naming convention from user.

  - 8.04.00.09.xx.y-k
  - No fcport FC-4 type assignment in GA_NXT response.
  - Fix checkpatch error in qla2xxx_mctp_dump.
  - Change in setting UNLOADING flag and FC vports logout sequence while unloading qla2xxx driver.
  - Clear unsupported 'states' during Get-FW-State queries.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Pass correct parameters while creating an initrd.
  - Remove spurious taking of ha->vport_slock spinlock.

  UEK:
  - Add macro for kernel extended version.

  RHEL 5.x:
  - Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports.
  - Pass correct parameters while creating an initrd.

  - 8.04.00.08.xx.y-k (RHEL 6.x, SLES 11.x, UEK and Citrix)
  - Correct loop_id_map allocation-size and usage.

  - 8.04.00.07.xx.y-k
  - Prefix qla2xxx with the dump file name.
  - Delay for legacy interrupts not required for all boards for ISP83xx.
  - Use correct logger path in udev scripts.
  - Allow MSI interrupt registration for ISP82xx.
  - Don't toggle RISC interrupt bits after IRQ lines are attached.
  - Fix for legacy interrupts for ISP83xx.
  - Restrict nic core reset to one function for mctp.
  - Update to Implementation of the mctp.
  - Enable fw attributes for ISP24xx and above.
  - Get fcal position map should not be called for p2p topology.
  - Set Maximum Read Request Size to 4K.
  - Enclose adapter related calls in adapter check in failed state handler.
  - Fix for handling some error conditions in loopback.
  - Fix description of qla2xmaxqdepth parameter.
  - Set idc version if function is first one to come.-
  - Do not restrict the number of NPIV ports for ISP83xx.
  - Do PCI fundamental reset for 83xx.
  - Fail initialization if unable to load RISC code.
  - Ensure PLOGI is sent to Fabric Management-Server upon request.
  - Remove setting Scsi_host->this_id during adapter probe.
  - Use #defines instead of hardcoded values for intr status.

  V2632 (RHEL 6.x, SLES 11.x and UEK):
  - Remove dumping fw on timeout for bidirectional commands.
  - T10 DIF - ISP83xx changes.
  - Fix incorrect status reporting on DIF errors.
  - Change log messages to dbg and remove dumping fw on timeout for bidirectional.
  - Use the right field for container_of.

  SLES10.x:
  - Correct implementation of qla2x00_get_idma_speed.
  - Remove check for ISPs other than ISP81xx from qla81xx_set_port_config

  RHEL5.x:
  - Add stubs for edc and edc_status interface.

  - 8.04.00.06.xx.y-k
  - Don't call nic restart firmware if it is already active and running.
  - Wrong PCIe (2.5Gb/s x8) speed in the kernel message for ISP82xx.
  - Perform ROM mbx cmd access only after ISP soft-reset during f/w recovery.
  - Fix rval may be used uninitialized in this function warning.
  - Implement beacon support for ISP83xx CNA.
  - Fix for continuous rescan attempts in arbitrated loop topology.
  - Only enable link up on the correct interrupt event.
  - Update the driver license.
  - Don't register legacy interrupts for ISP82xx.
  - Add bit to identify Sensei card for thermal temp.
  - Implementation of MCTP.
  - IDC implementation for ISP83xx.
  - Add FW DUMP SIZE sysfs attribute.
  - Implementation of bidirectional.
  - Use bitmap to store loop_id's for fcports.
  - Display mailbox failure by default.
  - Remove redundant NULL check before release_firmware() call.
  - Add check in qla82xx_watchdog for failed hardware state.
  - Add I2C BSG interface.
  - Use dracut to rebuild the initramfs on RHEL 6 in build.sh.
  - Don't call failed handler for default case.
  - Add hilda fc fcoe entries in the udev rules file.

  - 8.04.00.05.xx.y-k
  - Display proper firmware version when new minidump template is gathered for ISP82xx.
  - Properly check for current state after the fabric-login request.
  - Proper completion to scsi-ml for scsi status task_set_full and busy.
  - Don't capture minidump for ISP82xx on flash update from application.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Optimize existing port name server query matching.
  - Remove mirrored field vp_idx from struct fc_port.
  - Display proper supported speeds for 16G FC adapters.
  - Fix reset time out as qla2xxx not ack to reset request.
  - Stats should be different from physical and virtual ports.
  - Block flash access from application when device is initialized for ISP82xx.
  - Handle interrupt registration failures more gracefully.
  - Logic to detect overheat condition and fail ISP82xx.
  - Remove unneeded DPC wakeups from qla82xx_watchdog.
  - RHEL 5.x/SLES 10.x
  - Revert : IO failure during ISP82xx reset.
  - Revert : Avoid depending on SCSI host_lock in queuecommand function.

  - 8.04.00.04.55.6-k
  - 8.04.00.04.32.1-k
  - ISP83xx(16G FC) support for Xenserver 6.0 and Oracle UEK.

  - 8.04.00.04.xx.y-k
  - Remove resetting memory during device initialization for ISP82xx.
  - Proper detection of firmware abort error code for ISP82xx.
  - SLES10 SPx: Add udev script, udev rules file, kmdtool.
  - SLES10 SPx: Proper notification of device udev event for automatic gathering of firmware dump.

  - 8.04.00.03.xx.y-k
  - Correct link-reset regressions introduced during 83xx porting.
  - Avoid invalid request queue dereference for bad response packets.
  - Stop iteration after first failure in -_id functions.
  - Fix incorrect register access in qla2x00_start_iocbs().
  - Fix to update proper command completion upon command retries.
  - Hard code the number of loop entries at 128.
  - Reference proper scsi_qla_host structure for processing non-scsi SRB commands.
  - Handle device mapping changes due to device logout.
  - Fix wrong decrement, null sp access.
  - Initialize the command done routine.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Complete mailbox command timedout to avoid initialization failures during next reset cycle.
  - Add ha->max_fibre_devices to keep track of the maximum number of targets.
  - Cache swl during fabric discovery.
  - Remove EDC sysfs interface.
  - Perform firmware dump procedure on mailbox command timeout.
  - Change the log message when previous dump is available to retrieve for ISP82xx.
  - Remove check for null fcport from host reset handler.
  - Correct out of bounds read of ISP2200 mailbox registers.
  - Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
  - Reduce mbx-command timeout for Login/Logout requests.
  - Clear options-flags while issuing stop-firmware mbx command.
  - Add an "is reset active" helper.
  - Prep zero-length BSG data-transfer requests.
  - Perform implicit logout during rport tear-down.
  - Handle failure cases during fabric_login
  - Increase speed of flash access in ISP82xx adapters to improve firmware load speed.
  - Add check for null fcport references in qla2xxx_queuecommand.
  - Handle change notifications based on switch scan results.
  - Use consistent DL mask for ELS/CT passthru requests.
  - Consolidation of SRB processing.


author: Prashant Sreedharan <prashant.sreedharan@broadcom.com> 3.137h
changelog:
  - tg3_disable_ints using uninitialized mailbox value to disable interrupts (Severity:Minor)
  - Enhancement for recoverable/unrecoverable errors (Severity:Minor)
  - Add support for RHEL 6.6 (Severity:Minor)
  - Readme file does not indicate tg3.spec location (Severity:Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137j
changelog:
  - Add support for SLES11SP4 (Severity:Minor)
  - Add support for Debian 7.7 (Severity:Minor)
  - Fixed delay in getting OperationalStatus of the nic on system reboot (Severity:Minor)


author: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> 3.137k
changelog:
  - Add support for linux 3.16.0 kernel (Severity:Minor)
  - Add support for RHEL 4.8 (Severity:Minor)
  - KVM PCI passthrough failed for tg3 on SUSE 11.3 (Severity:Minor)
  - Add support for RHEL 5.11 (Severity:Minor)
  - (SLES11SP4) After installation of tg3 driver, interface(s) don't come up (Severity:Minor)


author: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> 3.137o
changelog:
  - Add work around HW/FW limitations with vlan encapsulated frames (Severity:Minor)
  - Fix for transmit queue 0 timed out when too many gso_segs (Severity:Medium)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137v
changelog:
  - Backport upstream patches  (Severity:Medium)
  - Add PHY reset workaround in change MTU path for 5717/19/20  (Severity:Medium)
  - Update the copyright (Severity:Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137w
changelog:
  - Add SLES 15 support  (Severity:Medium)
  - Add RHEL 7.5 support (Severity:Medium)
  - Fix RHEL 6.4 compilation (Severity:Medium)


