Added support for Red Hat Enterprise Linux 7 update 6.

]]> Address the Linux Spectre Variant 2 Vulnerability Issue

]]> Added support to SuSE Linux Enterprise Server 15

Updated to version 1.0.0.0-4 (c)

]]> Updated to version 1.0.0.0-4 (b)

]]> Updated code for the following:

  • Emulex CNA Driver display due to split
  • Optrom version display
]]> Updated code for the following:

  • Emulex CNA Driver display due to split
  • Optrom version display
]]> Fixed the following items:

  • TBD
]]> Fixed the following items:

  •  Memory leaks
  • Use /etc/os-release as authoritative when present
  • Handle VLAN interfaces before regular interfaces.
  • Fix some instances where ‘signed char’ should have been ‘unsigned char’

 

]]> Added support for SUSE LINUX Enterprise Server 15 OS.

]]>
  • Initial Release
    • ]]>         Fixed the following items:

    • TBD
    ]]>         Fixed the following items:

    • Fix memory leaks
    • Use /etc/os-release as authoritative when present
    • Handle VLAN interfaces before regular interfaces
    • Fix some instances where ‘signed char’ should have been ‘unsigned char’
    • Changed syslog() level of debug messages in smad from LOG_ERR to LOG_INFORM

     

    ]]>         Added Support to SuSE Linux Enterprise Server 15

    Updated to version 3.3-3(c)

    ]]>         Updated to version 3.3-3(b)

    ]]>         Added support to Red Hat Enterprise Linux 7u5

    Updated to version: 12.0.1107.0

    ]]>         Updated to version: 11.4.1205.0

    ]]>         Fixed the following items:
    ◾Enabled additional debugging information for the storage agents debuginfo rpm

    ]]>         Fixed the following items:

    • The threshold condition byte of cpqHoMibStatusArray aligns with cpqHoFileSysCondition.
    • Read /proc/tty/driver/serial to replace /proc/ioports as data source. The purpose is to correct the order of tty serial port shown on HPE SMH.
    • Updated the “memory device type detail” information for LRDIMM/DIMM/RDIMM. The purpose is to recognize the value from SMBIOS and show the memory type detail information.
    ]]>         Added support for Red Hat Enterprise Linux 7 update 6

    ]]>         Address the Linux Spectre Variant 2 Vulnerability Issue.

    Due to slow performance of HPE B140i configured with M.2 drives, the Drive Write Cache (DWC) could not be enabled. This issue is now resolved.

    After upgrading to to Red Hat Enterprise Linux 7U5 the system could fail to boot if drive 1 is removed.

    ]]>
  • Support for HPE FlexFabric 10Gb 2-port 556FLR-T Adapter.
  • Support for HPE StoreFabric CN1200E 10G BASE-T Dual Port Converged Network Adapter.
  • Support for memory dram speed 2400 Mbits.
  • Support for DDR4-2400 1.2V memory.
  • Support for Apollo 4520 Storage Expander.
  • Support 6 SFF rear cage for Apollo 4200.
  • Support for StoreFabric CN1100R-T Converged Network Adapter.
  • Hewlett Packard Enterprise rebrand.

    • See the HP Service Pack for ProLiant Release Notes for more information.

    See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.

    ]]>
  • Contains fixes to support HPE ProLiant Gen9 servers.
  • DL60 blank Remote Management category.
  • Untranslated English to Japanese strings.
  • Blank Remote Control section in Survey for DL20 Gen9.
  • Capability to report same backplanes but different box numbers. 
    • ]]>         Updated the kit to version 6.0.0.0-4

    ]]>         Updated the kit to version 6.0.0.0-4

    ]]>         Added support for Red Hat Enterprise LINUX 7 Update 6

    ]]>         Address the Linux Spectre Variant 2 Vulnerability Issue

    ]]>         Fixed the following items:

    • Corrected the "technology field" at Memory Details page by updating cpqHeResMemModuleTechnology
    ]]>         Red Hat Enterprise Linux 7 update 6

    ]]>         Address the Linux Spectre Variant 2 Vulnerability Issue

    ]]>         Fixed an issue where HPONCFG was not able to detect openssl library when both 32-bit and 64-bit openssl are installed.

    ]]>         Introduced support for iLO 5 v1.35.

    ]]>
  • Added the ability to enable or disable Drive Write Cache for configured and unconfigured drives
    • ]]>
  • Added support for Freeze/Anti-freeze of the Sanitize command.
    • ]]>
  • Added support for SUSE LINUX Enterprise Server 15 OS.
    • ]]>
  • Initial Release
    • ]]>         Fixed the following items:
    ◾Add a new constraint to avoid buffer overflow while retrieving device information.

    ]]>         Fixed the following items:

    • Extend the SPD size for DDR4 memory.
    ]]>
  • Added the ability to enable or disable Drive Write Cache for configured and unconfigured drives
    • ]]>
  • Added support for Freeze/Anti-freeze of the Sanitize command.
    • ]]>         Added support to Red Hat Enterprise Linux 7u5

    Updated to version 11.4.334.2

    ]]>         Updated to version 11.4.207.0

    ]]>
  • Added the ability to enable or disable Drive Write Cache for configured and unconfigured drives
    • ]]>
  • Added support for Freeze/Anti-freeze of the Sanitize command.
    • ]]>         SLES 15 OS support

    ]]>         Updated the following components:

    • PHP to version 5.6.30
    • Zlib to version 1.2.11
    • PCRE to version 8.41
    • Libxslt to version 1.1.32
    ]]>         See the iSUT Release Notes for information about the enhancements in this release

    ]]>         See the iSUT Release Notes for information about the enhancements in this release

    ]]>         See the iSUT Release Notes for information about the enhancements in this release

    ]]>         See the iSUT Release Notes for information about the enhancements in this release

    ]]>